Some shortcomings and unexpected problems are not unlikely.
The basic feature, with 2 views going to a texture array's
0 and 1 elements, seems to be working with macOS, also with
MSAA. Instanced drawing has not been verified. (relevant
because layered rendering works via instancing in Metal
and the QRhi backend has to adjust the instance count
in every draw call)
Fixes: QTBUG-114774
Change-Id: I3655e0d2c658b88c4cd6b52a32f94134324e4ac9
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
We were basically timing the qSleep, which is pointless. We don't need
to verify that qSleep(X) spends at least X time. Because it also
doesn't. Somehow, QNX can execute 1000 ms sleeps in 996 ms.
Amends commit 30e5ff3ff2.
Pick-to: 6.6 6.5
Change-Id: I46b5dede27114be29724fffd176a66c1799075b7
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This should not be there because 'u' is passed to beginPass().
Change-Id: I95ba8ed400baa06948b4d4c6bbf7ca2d07a5480f
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Gerrit says it refuses to color lines that exceed 500 characters, so
let's split this line to get colors back.
Pick-to: 6.6 6.5
Change-Id: Iab6d37332e27ecdeaf1420da6fa242ca65f0aab5
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The test needs investigation. Skip it for now so that we can enable
CI for WASM but leave a note to investigate it.
Task-number: QTBUG-109954
Change-Id: I445996e969e7016a4d92a7e70da10b6d84a0fc71
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Two QCOMPARE calls aren't worth the extra indirection.
Change-Id: If3b54d303c28582c7df29a3f1c4dc1a2c2a974f4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When a table view adds its first row, QHeaderView::initializeSections()
is called. It initializes the vertical header view with the number of
added sections. Subsequently QHeaderView::sectionsInserted() is called
with the same amount of newly added rows/sections.
That leads to the initial amount of sections being 2x the number of
rows added in the first go. In other words, the table view will display
at least one row more than the underlying table model has.
This patch adds an OR condition to the early return check at the
beginning of QHeaderView::sectionsInserted(). The method returns early
if the number of sections equals the number of respective sections
(rows in this case) in the model.
An autotest is added in tst_QTableView::rowsInVerticalHeader().
Fixes: QTBUG-114225
Pick-to: 6.6 6.5
Change-Id: I895444f025591981965562e54e2335391db52357
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
33c88f86b5 added some logic to QAPM in
order to have it automatically emit headerDataChanged when rows/columns
were added or removed in the model. This was done as a stopgap measure
to prevent QAPM from asking for illegal indices in order to implement
automatic remapping of the section headings (since there's no
mapSectionToSource).
The commit seems to have introduced a regression in QHeaderView, which
isn't prepared to receive headerDataChanged while a row/column count
change is in progress. When receiving headerDataChanged, QHeaderView
will try to read the row/column count and will store it internally.
When it will then receive the signals for insertion/removal of
rows/columns, it will interpret it as a modification of the previously
stored value -- even if the value it stored was already correct.
Fix this by avoiding to have two signals in flight at the same time;
emit headerDataChanged as a queued invocation.
Task-number: QTBUG-114225
Change-Id: I521465a852b8c7135f22f730ead41dca760ba428
Pick-to: 6.5 6.6
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
INTEGRITY has a pre-P1115 implementation of std::erase/erase_if that
returns void instead of the number of erased elements, so make q20's
implementation more specialized, so the compiler will pick it over
INTEGRITY's (Marc's idea from the code review).
Change-Id: I88d025a3f90cdd65f5bb73beb8a39e32ccf12d9b
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Wrappers around P1301 [[nodiscard("reason")]].
[ChangeLog][QtCore][Q_NODISCARD_X/Q_NODISCARD_CTOR_X] Added as
wrappers around C++20 [[nodiscard("reason")]].
Task-number: QTBUG-114767
Change-Id: Ie566d9c9d500ef632c7e243af97081f83506a752
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
This relies on qsb being able to invoke dxc instead of fxc when the
request HLSL (shader model) version is 6.1. (6.1 is required for
SV_ViewID) This currently works only when conditioning offline with
qsb (or via CMake), because qsb can easily invoke dxc instead of
fxc. When shipping HLSL inside the .qsb package (so when -c is not
specified or running the external tool fails), this won't work since
the D3D12 backend still uses D3DCompile(), not IDxcCompiler. Support
for that will be investigated separately.
We also need to bump to ID3D12Device2 and ID3D12GraphicsCommandList1.
With Windows 10 version 1703 being quite old now, this should not be a
problem at run time.
There are however issues at build time, namely that MinGW and
MinGW/LLVM and similar seems to have ancient Windows SDK headers
according to the CI test runs. None of the MSVC configurations have
this in the CI, they have reasonable versions of d3d12.h and similar.
Therefore, one important aspect of this change is that the D3D12
backend of QRhi will only be available from now on when the SDK
headers are new enough (meaning ID3D12Device2 is declared, which is a
several years old type now). Otherwise, QRhi::create() will simply
fail when asking for D3D12 with a helpful warning message about the Qt
build being crippled.
Implementation-wise, there are surprises in store as well:
The way the PSO is created needs to be revamped to follow the
extensible approach that uses a pipeline state stream
description. Both the graphics and compute pipeline creation is
changed to use CreatePipelineState() and the associated
machinery. This is only really essential for graphics pipelines since
we know have to include data for view instancing (multiview). For
compute the result is the same as before.
Additionally, the view count must now be baked into the
QRhiGraphicsPipeline. This means that applications must call
setMultiViewCount() with the same value (typically 2) *both* on the
render target's color attachment and on the pipeline. Backends that do
not care about the pipeline's view count (GL, Vulkan) will of course
ignore it, but if it's not set correctly D3D12 will fail. The manual
test is updated accordingly.
Fixes: QTBUG-114772
Change-Id: I93db7313377e711c2faeb956815899b12132d23b
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Under some circumstances, MSVC seems to complain about SlotArgumentCount
being unused
qobject.h(210): warning C4189: 'SlotArgumentCount': local variable is
initialized but not referenced
note: see reference to function template instantiation
'QMetaObject::Connection QObject::connect<void(__cdecl QAction::* )(bool),
main::<lambda_1>>(const QAction *,Func1,
const QtPrivate::ContextTypeForFunctor<main::<lambda_1>,void>::ContextType *,
Func2 &&,Qt::ConnectionType)' being compiled
This is nonsense, as SlotArgumentCount is used in the next line, to
construct the list of signal arguments, but the workaround to declare
the variable as [[maybe_unused]] is trivial.
Add a connect statement to the test case that creates such a connection.
This does not produce any warning with or without the attribute (and if
it did, the build would fail for CI configuratinos setting -Werror).
Pick-to: 6.6
Fixes: QTBUG-114781
Change-Id: I4ee6f7d57c2836ef3dd9741d037d48181af2cdec
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
And take the opportunity to clarify what the QtVforkSafe namespace is
doing. Amends commit e71c226d6f.
Pick-to: 6.6
Change-Id: I443cf0c8a76243eead33fffd1767f3fa390a7cdd
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
When setFuture() was handed an element of m_futures, it would hold the
reference to past the clear(), which invalidates said reference.
Fix by taking the future by value instead of by cref.
While append() is not affected, as QList::append() already guards
against aliasing, do the same change there, both for consistency as
well as to optimize the common case of passing rvalues. It also means
we can use the rvalue overload of QList::append(), skipping the alias
analysis in the lvalue QList::append().
[ChangeLog][QtConcurrent][QFutureSynchronizer] Fixed a crash in
setFuture() if the argument was already a member of
QFutureSynchronizer::futures().
Pick-to: 6.6 6.5 6.2
Change-Id: Ic0b212b9f265a746df9a6beb6272a5415d131442
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
QWidgetPrivate::focusObject() always returns nullptr. That has lead to
mismatches between QGuiApplication::focusObject() and
QApplication::focusWidget(), when a widget got focus by the window
system (e.g. mouse click).
This patch implements QWidgetPrivate::focusObject.
It returns the current widget, if it doesn't have a focus proxy.
If it has a focus proxy, it resolves the proxy chain and returns the
deepest focus proxy.
(Note: It does not return QWidget::focusWidget(), because the focus
widget might not yet have been set, when the method is called).
Fixes: QTBUG-92464
Fixes: QTBUG-108522
Pick-to: 6.6 6.5 6.2
Done-With: Liang Qi <liang.qi@qt.io>
Change-Id: Icf01e8ac4fc5f722fbf8e0ca5a562617ae9ae8f2
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Liang Qi <liang.qi@qt.io>
Use the new argument to bundle the OpenSSL prebuilt libararies so that
ssl operations are actually tested at runtime.
Task-number: QTBUG-110025
Pick-to: 6.6 6.5
Change-Id: I0d73fed463a1724a9e0ee84ba603aa2ff1bc649b
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This is in line with how QMetaType handles QMetaTypeInterface*. You can
retrieve a const pointer to it.
Pick-to: 6.6
Task-number: QTBUG-113690
Change-Id: Iaf3c10603dc6049a5553987c90006807867abc0d
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
ACE-encode the domain names, replace dashes with underscores,
prepend underscore to domain name parts that start with a digit.
Add a regression test into tst_qdbusinterface.
Fixes: QTBUG-71674
Change-Id: I92e0c6889163c0eccc4c833f2058d759631f562c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Or old and new load hints in mergeLoadHints() instead of just storing
new ones. Andjust QLibraryPrivate::setLoadHints() to handle objects
with no file name differently and just set load hints directly.
Mention that load hints are merged once the file name is set
in the documentation for QLibrary::setLoadHints().
Add a regression test into tst_qfactoryloader.
Update and extend tst_QPluginLoader::loadHints() to take into account
load hints merging.
Fixes: QTBUG-114480
Change-Id: I3b9afaec7acde1f5ff992d913f8d7217392c7e00
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It's not a real leak in that the string data is being freed on program
exit (or, more recently, QPixmapCache::clear()), but it can lead to
lots of memory being bound for much longer than expected when users
put in new QString keys without attempting to retrive them again. It
can also lead to problems with QStringLiterals lingering around until
after their underlying data has been freed. A bug in the Fusion style,
generating new string keys for identical state, exposed this
misbehavior, and one way to fix the resulting issue for the user is to
make sure that QPixmapCache doesn't leak QString keys.
The Fusion style issue with generating non-repeating keys for use with
QPixmapCache should also be fixed, eventually, but this patch
relegates that to an optimization issue (the caching is effectively
non-existent), the resource exhaustion is gone now.
The issue exists because the QString keys are internally mapped to
QPixmapCache::Key's by way of a QHash<QString, Key> cacheKeys data
structure. When the QCache, indexed by Key, not QString, decides to
evict an entry, the Key is invalidated, but no-one was removing the
corresponding entry from cacheKeys. So make the existing releaseKey(),
used to invalidate copies of Keys referring to evicted pixmaps, do
that, now. So as not to have to scan the whole cacheKeys QHash for the
right Key, store the QString key, if any, inside the Key, so
releaseKey() can retrieve it and use it for O(1) erasure from
cacheKey.
This allows removing the previous work-around in clear()
(6ab0d25a09), greatly simplify
object(QString), and requires to rewrite all code that holds iterators
or references into cacheKeys over an insertion into or removal from
the QCache. Two (insert() and remove()) have already been done in
prequel commits, so only flushDetachedPixmaps() was left.
Fixes: QTBUG-112200
Pick-to: 6.6 6.5
Change-Id: Ic93b0ed388ae963267fe242b491c6c941d146b99
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Amends 55fe46fd58. Before that change,
key release events were ignored as the QLineEdit::event reimplementation
continued to call QWidget::event, and as QLineEdit didn't override
keyReleaseEvent, the default implementation in QWidget got called to
ignore the event.
Restore that behavior by explicitly calling the QWidget implementation
after updating QLineEdit-specific states, and add a test case.
Fixes: QTBUG-114654
Pick-to: 6.5 6.6
Change-Id: Ic8aa35a1c915b446aece47aaf03ef5cf1884b936
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Previously, failure handlers did not propagate cancellation. This would
lead to crashes when a QPromise was cancelled without having generated
any result. Subsequent continuations would be invoked and try to access
the result (which was nonexistent) and then crash.
This patch propagates cancellation through failure handlers to prevent
subsequent continuations from being called in the first place.
Fixes: QTBUG-114606
Pick-to: 6.6
Pick-to: 6.5
Change-Id: I23b28a8e70a76e1ba6416be4440360c6dbaef2a3
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
The export name is now ${TARGET_NAME}Entry. This can also be overridden
by using QT_WASM_EXPORT_NAME, both in CMake and qmake
Change-Id: I59c97ae6e22f0b2720716e9d7eff7b6b13d37ab5
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
QObjectPrivate::getPropertyAdaptorSlotObject called
connectionsForSignal.
Calling this function is only safe after it has been ensured beforehand that the vector has size > signalIndex. As getPropertyAdaptorSlotObject
is not supposed to modify the vector, it does not resize the vector and it could consequently end up with an out-of-bounds read.
To avoid that issue, we instead first check if the vector can
potentially contain an entry for the signal. If not, we simply return
nullptr, and avoid the call to connectionsForSignal.
The issue and its fix can be verified by running the modified
tst_qproperty test with ASAN enabled. The test is modified in the
following way:
- We first create a signal connection to a dummy slot. Otherwise,
connections.loadRelaxed() would return a nullptr, and the problematic
code would never be reached.
- We add enough signals to ensure that the fooChanged signal will
actually be out of reach (which means >= 8 signals, as the initial
capacity of the vector is 8)
Running the test without ASAN will most likely not result in a failure,
as then the out-of-bounds read will simply read garbage, and the most
likely result is that the cast below will fail.
Pick-to: 6.6 6.5
Change-Id: I18a3c4f52769c2b6491a685abb84f6fcfb44e4d8
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
This property can take a either a WebAssembly.Module
or a promise to a module, and we don't have to specify
the exact type in the property name.
Pick-to: 6.6
Change-Id: Iebaf52178253afe8c93cf78bbe0853461bf48b67
Reviewed-by: Mikołaj Boc <Mikolaj.Boc@qt.io>
The test checks whether correct windows get correct keyboard input,
having been activated with mouse clicks.
Also fixes the event propagation error found. Key events would propagate
to parent windows, which is something that should not happen with
window managers.
Change-Id: I18bae8c14cce5ccae151c2a00c84ffdba3b4587f
Reviewed-by: Mikołaj Boc <Mikolaj.Boc@qt.io>
Reviewed-by: Piotr Wierciński <piotr.wiercinski@qt.io>
Fixes an issue with generated code where the name of an enclosing
namespace is identical to an enum class type, when Q_ENUM_NS is used.
Consider:
namespace a {
Q_NAMESPACE
namespace b {
enum class b { Key, Key2 };
Q_ENUM_NS(b);
}
}
moc generated code such as:
Q_CONSTINIT const QMetaObject a:🅱️:staticMetaObject = { {
...
qt_incomplete_metaTypeArray<qt_meta_stringdata_CLASSaSCOPEbENDCLASS_t,
// enum 'TestEnum'
QtPrivate::TypeAndForceComplete<b::b, std::true_type>,
// Q_OBJECT / Q_GADGET
QtPrivate::TypeAndForceComplete<void, std::true_type>
>,
nullptr
} };
which confused the compiler:
error: ‘b’ is not a member of ‘a:🅱️:b
83 | QtPrivate::TypeAndForceComplete<b::b, std::true_type>,
Fixes: QTBUG-112996
Pick-to: 6.6
Change-Id: I37aee83c32efe96cc9d6c2bd0bdb9ba80bb7b8a7
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
We still need to consult fallbackThemeName() when computing the
parent list for an individual theme, as the Freedesktop Theme Icon
spec mandates that the "hicolor" theme comes last, but we no longer
need to do explicit fallback to fallbackThemeName() if a theme is
not found.
Pick-to: 6.5 6.6
Change-Id: I6c0b5a45d8258c5b6eaa761402944a735b1606ba
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
The use of fallback icons should not depend on a theme being set.
[ChangeLog][QtGui][QIcon] QIcon::fallbackSearchPaths() will now be consulted
for fallback icons even if the current theme name is empty.
Pick-to: 6.5 6.6
Change-Id: Ia8d14062de7c53601fd9dac30f87a9e672aa2207
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
So that building only tst_qprocess also builds the required test app.
Change-Id: I19a92f9dd2f4de08302d09cad0caf55c285a6dae
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We would previously only use the fallback theme for themes that did
not exist, or for themes that did not declare any parent theme.
We now unconditionally use the fallback theme, even for themes that
declare their own parent themes, so that a QIcon::fromTheme("foo")
that doesn't exist in the current theme, nor any of its parents,
nor in "hicolor", will still be looked up in the fallback theme.
The reason this seemed to work in the existing tests was because
our test themes inherit system themes such as crystalsvg and gnome,
and we didn't provide a hicolor theme. Any of these themes missing
would lead us into the code path where we use the fallback theme
for a missing theme, masking that fact that we had not added the
fallback theme to the list of fallbacks for the theme that had
explicit parents declared.
The logic has been moved out of the theme parsing and into an
accessor in QIconTheme, so that we're not caching the fallback
theme lookup.
[ChangeLog][QtGui][QIcon] QIcon::fallbackThemeName() will now be
used as fallback even for themes that declare a parent theme.
Pick-to: 6.5 6.6
Change-Id: Ib0ce1dfe97030f23893460ed624073a719a3ebd1
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Setting a fallback theme will affect the lookup strategy, so we need
to invalidate earlier lookups.
Pick-to: 6.5 6.6
Change-Id: I962245ddb3a20b7798d5ce831ed8a369b0ab76b4
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Adding the "assets:" prefix to BaseName leads to wrong names returned by
QFileInfo{"assets:/path/to/file"}.fileName().
Instead to return "file" it returns "assets:/file" which is not the
expected result.
Fixes: QTBUG-114576
Fixes: QTBUG-114219
Fixes: QTBUG-112261
Pick-to: 6.6 6.5 6.5.2
Change-Id: I574bf325300c0aedef68b1b183fa837144ad63c6
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
We so far only handled them if they came at the very start of the method
declaration.
This patch ensures that we also handle them after the meta-method tag
(but before the actual type).
Unifying parseFunction and parseMaybeFunction to avoid the need to
munally keep them in sync is left for another day.
Fixes: QTBUG-111330
Pick-to: 6.6 6.5 6.5.2 6.2
Change-Id: Ic94edb69f04b9150aea2c8e6d004a8b9e5cf12ec
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I8e0c5d7b9049fb3c3248749db8dc8c616db293f0
Reviewed-by: Mikołaj Boc <Mikolaj.Boc@qt.io>
Reviewed-by: Piotr Wierciński <piotr.wiercinski@qt.io>
The test checks whether windows repaint correctly by sampling the
background after their backing stores have been flushed.
Change-Id: Ib544457074d7d477a4acdc5c331ef83e5ba471d2
Reviewed-by: Piotr Wierciński <piotr.wiercinski@qt.io>
Reviewed-by: Mikołaj Boc <Mikolaj.Boc@qt.io>
If the style changes while a popup is open (or about to close),
the popup will change style as well before it's hidden. And
this can result in the popup window briefly ending up smaller
than what it needs to be, in order to fit all the menu items.
In that case, it will show 'up' and 'down' widgets in the
menu that auto scrolls it when hovered. And all this can
happen for a split second while the menu is about to close
(as a result of the user clicking on a menu item).
A bug happens because of this if you click on the last menu
item in the list, and this causes the style to change. In
that case, the 'down' widget will end up directly underneath
the mouse for a split second, which will trigger an auto-scroll
timer to start. This timer will trigger a bit later, after
the popup has been hidden, and scroll the list view a bit down.
The result is that the next time you open the popup, it ends up
at the wrong place on the screen in a failed attempt to center
the current index on top of the combobox.
This patch will make sure that we always scroll the list view
to the top before we start calculating where the popup should
be placed on the screen. Otherwise the geometry ends up wrong
since the popup will anyway be resized (if possible) to fit
all the menu items before it's shown and should therefore not
take scrolling into account.
Pick-to: 6.6 6.5
Fixes: QTBUG-113765
Change-Id: I61b5b832904de471c2303fc67325feec322b1449
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Like commit 91f6460aff which added support
for Windows. This API is documented and has apparently been present in
FreeBSD for a long while.
The DragonflyBSD API is very similar, but I don't have one to confirm
that I've coded correctly. OpenBSD and NetBSD may have similar APIs, but
I haven't even researched them. We're open to contributions, though.
Change-Id: I63b988479db546dabffcfffd1766bc431fed614b
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Setting parents for WASM platform windows is now supported. This means
that windows now reside in a hierarchical window tree, with the screen
and individual windows being nodes (QWasmWindowTreeNode), each
maintaining their own child window stack.
The divs backing windows are properly reparented in response to Qt
window parent changes, so that the html structure reflects what is
happening in Qt.
Change-Id: I55c91d90caf58714342dcd747043967ebfdf96bb
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
The idea is to store a concatenable in a QStringBuilder object by value
or by reference, depending on how it was originally passed into the
concatenation operator. So if it was passed by r-value, we treat it as
a temporary object and hold it by value (and use move-semantic if
available), otherwise we hold it by reference (as before).
To achieve this we first change concatenation operators '%' and '+'
to take their arguments by universal reference. Next we instantiate
QStringBuilder object with deduced types of the arguments, which will
be a "value type" or a "reference type" according to "universal
reference deduction rules".
Further we use perfect forwarding to pass arguments to QStringBuilder's
constructor. Thus arguments, initially passed by r-value reference
and which are move-constructible, will be "moved" to corresponding
QStringBuilder member variables.
So, to summarize:
1. Arguments passed by l-value reference - stored in QStringBuilder
object by reference (as before).
2. Temporary objects passed by r-value reference - stored in
QStringBuilder object by value. If a type is move-constructible
(QSting, QByteArray, etc), the object will be "moved" accordingly.
Special thanks to Giuseppe D'Angelo for the tests.
Fixes: QTBUG-99291
Fixes: QTBUG-87603
Fixes: QTBUG-47066
Task-number: QTBUG-74873
Task-number: QTBUG-103090
Task-number: QTBUG-104354
Change-Id: I64f417be0de0815ec5ae7e35a1cc6cef6d887933
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Vladimir Belyavsky <belyavskyv@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
currentTextChanged is emitted when the current index changes
and the current text doesn't.
This can be the case, if
- old and new index have identical text values
- an item is removed below the current index
[ChangeLog][Widgets][QComboBox] emit currentTextChanged only,
if currentText changes.
Add a corresponding test in tst_QComboBox::currentText().
Fixes: QTBUG-113717
Pick-to: 6.6
Change-Id: I847874f0792b29a2841e50bb82d06ad496fb02c3
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The example seems incomplete, is undocumented (and unused in shippets,
in spite of tags being present), and generally full of comments that
give the impression that this is for manual testing rather than showing
best practices.
Pick-to: 6.5 6.6
Change-Id: Ie615420e493cc6bb461c5d9ff8d4ae82bb3591db
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The code is mostly an implementation of a model based on QStorageInfo,
shown in an otherwise uninteresting tree view.
Pick-to: 6.5 6.6
Change-Id: Id6ce70d71ddc9bcd6e82a9ee12f5e1af159eac7a
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
These APIs started out as private APIs in qnumeric_p.h, but have since
been made pseudo-public in qnumeric.h. The qnumeric_p.h versions just
forward to the qnumeric.h ones, so just use the latter.
This is in preparation of removing the {add,sub,mul}_overflow
versions, which, despite being defined in the unnamed namespace, don't
sport the q prefix, so potentially clash with global symbols.
The change is a simple textual search and replace, manually excluding
qnumeric_p.h.
Picking to 6.5 to avoid cherry-pick conflicts going forward.
Pick-to: 6.6 6.5
Change-Id: Ic0f7c92f7c47923317109e8a9dc06fa66bdff2c2
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
If we have a rvalue reference to an unshared QVariant, we can avoid
potentially expensive copies, and use move semantics instead.
[ChangeLog][QtCore][QVariant] Added rvalue QVariant overloads of qvariant_cast<T>() and QVariant::value<T>().
[ChangeLog][Potentially Source-Incompatible Changes][QVariant] It is no
longer possible to take the address of a specialization of
qvariant_cast; consider using a lambda function instead.
Change-Id: Ifc74991eadcc31387b755c45484224a3200bb0ba
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This is not q20::is_constant_evaluated() because it does not replace
that for all compilers. Instead, it's our own version of it that may
return false even in constant contexts. However, for the majority of our
users, it will work even in C++17 mode.
Updated QStringView and QAnyStringView to use it, which are the only two
places in all of Qt that used std::is_constant_evaluated().
Change-Id: Ieab617d69f3b4b54ab30fffd175c50c517589226
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When using move-only types, continuations args are set using takeResult
function, which has the side effect of invalidating the QFutureInterface
associated with the promise/futures by:
1. setting isValid to false
2. setting the state to NoState
And when the promise is destroyed, it tries to run the continuations if
`finished()` is not called, which is done by checking the Finished bit
in the state. But since the continuation has been run before, and the
state has been set to NoState it tries to run the continuation again
causing a segfault. Multiple solutions come in mind:
1. don't run the continuation if the state is NoState, but this would
break the case when an empty promise is destroyed
2. check inside the continuation if it has been run before, and if so
don't run it again, but this seems hacky since we don't want the
continuation to be run twice, and it should break if it did.
3. when invalidating the promise leave the state as is, and change
isValid only to false, which changes the current behavior, but is
still compatible with the documentation which states only that
isValid will return false if takeResult is called
I chose option 3
I also extended some tests to test for move only types, and added a test
that continuations run when a promise is finished. This simple case
would segfault before with move only types.
Fixes: QTBUG-112513
Pick-to: 6.5 6.6
Change-Id: Ie225ac4fdf618e4edfb0efd663d6c7fd6b916dbd
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Pipes are unnamed FIFOs, so they're basically the same.
The difference here is that open() blocks on opening a FIFO until both
ends of the FIFO are opened. This helps us in synchronizing the two
threads and thus ensuring that that the read() system call deep inside
QFile does, indeed, block.
We see this with strace -T on Linux:
[pid 662956] openat(AT_FDCWD, "/run/user/1000/tst_qfile_fifo.2575572361", O_RDONLY|O_CLOEXEC <unfinished ...>
... aux starts up ...
[pid 662957] prctl(PR_SET_NAME, "QThread") = 0 <0.000004>
[pid 662957] openat(AT_FDCWD, "/run/user/1000/tst_qfile_fifo.2575572361", O_WRONLY|O_CLOEXEC <unfinished ...>
[pid 662956] <... openat resumed>) = 4 <0.000133>
[pid 662957] <... openat resumed>) = 6 <0.000011>
[pid 662957] clock_nanosleep(CLOCK_REALTIME, 0, {tv_sec=0, tv_nsec=500000000}, <unfinished ...>
[pid 662956] read(4, <unfinished ...>
[pid 662957] <... clock_nanosleep resumed>NULL) = 0 <0.500183>
[pid 662957] write(6, "\2", 1) = 1 <0.000033>
[pid 662956] <... read resumed>"\2", 1) = 1 <0.500311>
Pick-to: 6.6
Change-Id: I63b988479db546dabffcfffd1766d7a48819b149
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QProcess detects other types of failures from inside the modifier as
successful starts, because the childStartedPipe gets closed without an
error condition getting written. The new method allows a reporting as a
proper failure-to-start.
Added tests for both cases.
[ChangeLog][QtCore][QProcess] Added failChildProcessModifier().
Change-Id: Icfe44ecf285a480fafe4fffd174da2b10306d3c2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This amends commit f9c87cfd44 to reset the
signal block mask too, not just the signal handlers. For this, SIGPIPE
is not treated specially.
Pick-to: 6.6
Change-Id: Ib5ce7a497e034ebabb2cfffd17627289614bf315
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The replace() implementation overwrites the passed Key key with a new
version, const_cast'ing away the const from the key passed by
reference-to-const. This is UB if the Key was originally declared
const.
Deprecate the function.
Also inline the const_cast, so compilers can readily detect the UB
even if users don't enable deprecation warnings. Due to the severity
of the issue (UB), immediate deprecation is warranted. There appear to
be no in-tree user of the API outside of tst_qpixmapcache.cpp.
[ChangeLog][Deprecation Notice][QtGui][QPixmapCache] The `replace(key,
pixmap)` function has been deprecated, because passing a `const Key`
to it results in undefined behavior. Use `remove(key, pixmap)`
followed by `key = insert(pixmap)` instead.
Pick-to: 6.6
Change-Id: Ic5060ce3271f2a1b6dc561da8716b452a2355d4c
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
If a foreground style has been defined in the style sheet,
QStyleSheetStyle populates its brushes for the color roles ButtonText,
WindowText, Text, and the widget's foregroundRole with the foreground
brush. PlaceholderText is set to the same brush with a modified color.
That sets their resolve bits in QStyleSheeetStyle's palette and
prevents these color roles from being inherited by the widget's
palette - in contrast to all other brushes.
This patch makes the brushes mentioned default to the widget's palette
if they are set there. It adds a test in tst_QStyleSheetStyle.
Fixes: QTBUG-93009
Pick-to: 6.6 6.5
Change-Id: Ie3df9dbd17b96fa72beee90792fc7eca1933cdbe
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QDeferredDeleteEvent has the loopLevel field, which is a sum of
scope and loop levels found at posting. In sendPostedEvents however,
it is impossible to only use this information to find delete events
posted before the outermost loop (which should be handled by any loop)
based solely on this information, as the scope level essentialy removes
the information on loop level.
Break the loopLevel in two, storing both loop and scope levels in
QDeferredDeleteEvent, so that we can check whether an event was posted
before the outermost event loop (for which we need to compare only the
loop level).
QDeferredDeleteEvent was also made private as it should - it is an
implementation detail that wasn't hidden properly.
Change-Id: I0a607a0bd3a2deb5024acad67f740dbf4338574c
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Mikołaj Boc <Mikolaj.Boc@qt.io>
We observe failures in CI on QNX because the measured timeout is ~995ms
rather than the expected 1000ms. Start the timer before the thread
starts to guarantee that at least as much time elapses as the thread
waits before writing the second byte to the pipe.
Otherwise, the thread might be sleeping already when the timer starts,
and then we can't rely on any measurements.
Pick-to: 6.6 6.5
Change-Id: I6072569a987f5e952b0953e0e394a223f891fd25
Reviewed-by: Dimitrios Apostolou <jimis@qt.io>
Between the find() == 0 obfuscation (since fixed) and this unchecked
replace(), it took me way too much time to figure out what was going
on: the key passed has been invalidated by the setCacheLimit(0).
Now that we QVERIFY that the replace() _fails_, it's much easier to
backtrack and figure out why it does so and why, consequently, the
following find() is also expected to fail.
As a drive-by, reorder two lines so the grouping becomes clearer
(blocks now both headed by setCacheLimit()).
Pick-to: 6.6 6.5 6.2 5.15
Change-Id: I434b65fc13c3fed6512036efeb98d738eeb2a13d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
None of the existing tests failed when I started to return a valid key
from a failed insert(QPixmap), so add a test that would fail.
Pick-to: 6.6 6.5 6.2 5.15
Change-Id: I74f23d2ec4c04151f8f1266c0c503713d4642f3a
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This is just confusing. QPixmapCache::find() already returns bool,
comparing it to a literal zero just makes it hard to read.
Pick-to: 6.6 6.5 6.2 5.15
Change-Id: I43c000890377cca2111daa48799f10cc99aad8cf
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Since first requestActivate may happen before the window div is
actually displayed on-screen, we need to sync Qt's activation state
with DOM as soon as DOM element becomes visible. Focusing an
invisible element is impossible.
Fixes: QTBUG-79934
Change-Id: I04cf9b4ead006c9b8b135b3b6967d7938c581833
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
This no longer is range-length preserving now, so adapt the
documentation.
For the non-contiguous iterator case, it's actually ok to always
resize(0) and then append(), because, unlike for QList and QVLA, the
resize(0) doesn't actually iterate the container to destroy
elements. It just sets some members and conveniently detach()es for
us.
The char8_t case is even more complicated, since we can, atm, not
include qstringconverter.h into qstring.h, yet qstringconverter is
required for stateful UTF-8 decoding in the input_iterator case. So
that's postponed to yet another patch, and maybe won't make it into
6.6. But I feel it's important to have at least one
non-length-preserving version of assign(it, it) in before release lest
users come to rely on this documented (and de-facto) feature of the
the step-2 assign().
Fixes: QTBUG-106198
Pick-to: 6.6
Change-Id: Id458776e91b16fb2c80196e339cb817adee5d6d9
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
This is an improved version of the previous attempt to remove
this 3c6c3eccd1. Now we also take
into account that concatenation of 2 null stings must also produce
null string as a result.
Change-Id: I39c270552839b056247c1cce334cef4fa8f1cfdd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QMenu's causedStack maintains a list of menus on the way to the menu,
and might contain nullptr if one of the entries was a tear-off menu
that got closed (and thus destroyed, due to DeleteOnClose).
If the entry we get from the stack is nullptr, fall back to the passed-
in parent widget pointer, and test for nullptr before accessing.
Add a test case that crashes without the fix.
Fixes: QTBUG-112217
Pick-to: 6.6 6.5 6.2
Change-Id: I958182db47c3cc8733e1780f7efef43881ffae11
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
In Schannel it is not guaranteed CertificateBlacklisted will be the
first error emitted. And it really does not make a difference anyway.
Pick-to: 6.6 6.5 6.2
Change-Id: If041f913db9e78ac54e6f8bb2ba1bda110e7d64a
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
So I can use it in tst_QProcess itself.
This also modernizes it a bit by using __builtin_trap() where available.
On x86-64, this expands to the ud2 instruction.
Pick-to: 6.6
Change-Id: Ib5ce7a497e034ebabb2cfffd176288433378731b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
We now add NOMINMAX to PlatformCommonInternal target which will be
linked to everything else, so min/max will not be defined upon the
inclusion of `windows.h`, or other headers.
Pick-to: 6.5 6.6
Change-Id: I10016720dac7ce015e929885b7368ee86d8b6918
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Restrict the permissible value_types to those QStringView can take,
plus QLatin1Char. All of these implicitly convert to QChar and give
the correct result, even when converted char-by-char.
Task-number: QTBUG-106198
Pick-to: 6.6
Change-Id: Icb44244cb08af391161c4309467d4e0d2d3d3d62
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Dennis Oberst <dennis.oberst@qt.io>
When a floating dockwidget's title changes, it is rendered as a
window title. When the title changes while floating, the change will be
reverted to the pre-change title when the dockwidget is docked again.
This patch explicitly propagates the window title, if it has been
programmatically changed while the dock widget is floating.
It adds test functionality in tst_QDockWidget::floatingTabs().
Fixes: QTBUG-113591
Pick-to: 6.6 6.5
Change-Id: I96fa69fb27ad1a85f4ea9ce44c0a22290259fca6
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This seems to work with prepend(char), but not with prepend("data"),
cf. QTBUG-114167.
Task-number: QTBUG-114167
Pick-to: 6.5 6.6
Change-Id: I7aa4dca7c2b5938c2e5ad416231945c23140d659
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
If an application sets the current index and resizes the tab widget
before showing it, then the scroll offset might be calculated based on
an old size. Since after ca15f650a1,
resizing explicitly avoids scrolling, this could result in tabs ending
up scrolled outside of the tab bar when showing the tab widget.
Fix that by explicitly making the current tab visible in the tab bar's
showEvent handler, which recalculates the scroll offset based on the
actual size.
This is only reproducible with a tab widget, which lays out the tab bar
for each change and resets the tab bar's layoutDirty flag. Add a test
case there.
Pick-to: 6.5 6.6
Fixes: QTBUG-114204
Change-Id: I1e9506b9dde1dd892291d108dd2c7b675ef99509
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: Jonas Kvinge <jonas@jkvinge.net>
QPixmapCache maintains a mapping from QString to QPixmapCache::Key, in
the form of the cacheKeys QHash, but QPixmapCache::clear() didn't
touch it, leading to the string data (as well as the Keys) being
retained after any possible use. This can lead to memory slowly being
eaten up, as reported in QTBUG-112200, and prevents a periodic calling
of QPixmapCache::clear() from being a work-around for the issue in the
bug report.
Fix by clearing cacheKeys in QPixmapCache::clear().
This is designed as a low-risk enabler of a work-around, not a fix for
the issue. The work-around enabled by this is periodic calling of
QPixmapCache::clear().
[ChangeLog][QtGui][QPixmapCache] Fixed QString key data not being
freed on clear().
Pick-to: 6.6 6.5 6.2 5.15
Task-number: QTBUG-112200
Change-Id: Ica6fa0e27e1b47b8df58d5e996378a2ececa5f9c
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
This reverts commit 3c6c3eccd1.
Reason for revert: They do appear to be needed, and removing them
changes behavior: QTBUG-114206
Pick-to: 6.6
Fixes: QTBUG-114206
Task-number: QTBUG-114238
Change-Id: Iac75bbc1ef14fe89f4282bd58fe996f9a09b8506
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If we don't have a valid Symbol to get a line number from, or if the
symbol.lineNum is -1, print a shorter message containing only the file
path. Printing: '/path/to/file👎1' isn't useful (and looks wrong).
Change error/defaultErrorMsg/warning/note() to delegate to one central
method, so that they all behave the same; e.g. previously warning() and
note(), guarded against printing "-1" for the line number, whereas
error() didn't.
This also makes it possible to use error() for reporting other issues
(e.g. the size of generator.strings list exceeding INT_MAX, which will
happen in a later commit).
Pick-to: 6.6
Change-Id: Iddc96e08315fae415be6a84928f845d7bceb4c5f
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
This is a minimal version of qtloader. The load function accepts
the same arguments as emscripten runtime with a few additions:
- qt.environment
- qt.onExit
- qt.containerElements
- qt.fontDpi
- qt.onLoaded
- qt.entryFunction
State handling has been removed in favor of making the load async
(assume loading when the promise is live).
Public APIs getting crashed status, exit text and code have been
refactored into the new qt.onExit event fed to load. No need for
keeping the state in the loader.
The loader is integration-tested. A test module with test APIs
has been created as a test harness.
The runtime APIs exposed by Qt (font dpi and screen API) are handled
by the qtloader seamlessly.
Change-Id: Iaee65702667da0349a475feae6b83244d966d98d
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Implemented assign() methods for QString to align with the
criteria of std::basic_string, addressing the previously missing
functionality. This is a subset of the overloads provided by the
standard.
Reference:
https://en.cppreference.com/w/cpp/string/basic_string/assign
The assign(it, it) overload is a bit more complicated and will be
added in follow-up patches.
[ChangeLog][QtCore][QString] Added assign().
Task-number: QTBUG-106198
Change-Id: Ia1481d184865f46db872cf94c266fef83b962351
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
More and more code in Qt uses char16_t instead of QChar, even
QString::Data, so reduce the impedance mismatch with such code and
supply a char16_t overload in parallel to the existing QChar* one.
[ChangeLog][QtCore][QStringDecoder] Added appendToBuffer() overload for
char16_t*, complementing the existing overload taking QChar*.
Task-number: QTBUG-106198
Change-Id: I0cb8ab22c897c14b1318a676f5212cc0cf1b72b7
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
[ChangeLog][QtNetwork][QDnsLookup] It is now possible to look up the
root DNS domain, by setting the name property to an empty string. This
query is usually done while setting the query type to NS.
Change-Id: I5f7f427ded124479baa6fffd175f688395941610
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
With 6e77da640aa84c1efe330d4a5224c9c7425ece57, the documentviewer
demo's TxtViewer plugin has been fully documented in order to replace
the Application example.
This patch moves the application example to manual tests.
Pick-to: 6.5
Change-Id: I67d975e478c7bc840613c8af1301a4eafe8f1a42
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
They were in the right order before rebasing multiple times. kdiff3 is
currently broken, so I don't know what happened.
Change-Id: Ib5ce7a497e034ebabb2cfffd17626fcf46c541fd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Extract Method fromStdVariantImpl() to share the otherwise
more-or-less identical implementation between the two overloads.
Don't use a constrained template version of fromStdVariantImpl() as
fromStdVariant(), because the constraint would have to be very complex
to continue allowing subclasses of std::variant to be passed.
As a drive-by, mark the valueless_by_exception() path Q_UNLIKELY.
[ChangeLog][QtCore][QVariant] Added overload of fromStdVariant()
taking rvalue std::variant<>s.
Fixes: QTBUG-114134
Change-Id: Ia1c7ae93ab421e6689dc9f2d8d0c2295b23cbbf6
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
When passing an rvalue-reference to QVariant, there is no reason to make
a copy if the type is moveable. Moreover, we know that the pointer which
we construct from the object passed to fromValue non-null. We make use
of both facts by parametrizing custom_construct on
non-nullness and availability of a move-ctor, and then dispatching to
the suitable template.
We need to keep the const T& overload, as otherwise code which
explicitly specializes fromValue and passes a const lvalue to it would
stop to compile.
[ChangeLog][QtCore][QVariant] Added fromValue() overload taking rvalues.
Change-Id: I44fb757d516ef364fe7967bc103b3f98278b4919
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
[ChangeLog][QtCore][QVariant] Implemented in-place construction for
QVariant. The constructor taking std::in_place_type<Type> constructs
an object of type Type directly inside QVariant's storage, without any
further copy or move operations. QVariant::emplace() does the same
when replacing the content of an existing QVariant and tries to reuse
previously-allocated memory.
Fixes: QTBUG-112187
Change-Id: I16614ad701fa3bb583976ed2001bb312f119a51f
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Implemented assign() methods for QByteArray to align with the
criteria of std::basic_string, addressing the previously missing
functionality. This is a subset of the overloads provided by the
standard.
Reference:
https://en.cppreference.com/w/cpp/string/basic_string/assign
[ChangeLog][QtCore][QByteArray] Added assign().
Fixes: QTBUG-106199
Change-Id: I899b14d74e8f774face8690303efb8610ead95b5
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Refactor the 'CHECK' macro to eliminate the capacity check and
explicitly verify that no reallocation occurred. The previous
implementation had to pass constants to suppress the issue arising
from differing growth rates between implementations.
Additionally, improve the 'std::stringstream' versions of the test
by incorporating the correct values. In the previous implementation,
the usage of:
auto tData = V(9);
~~~
std::stringstream ss("9 9 ");
had several issues. Firstly, it used the wrong test data since the
container's value_type of '(char) 9' resulted in a tab character '\t',
which was not accurately reflected in the stringstream assignment.
Secondly, this value caused problems in how stringstreams interprets it.
To address these issues, let's make the following improvements:
1. Use a default test value of 65 instead of (char) 9. This value, which
represents the character 'A', is less likely to cause errors and is more
intuitive.
2. Use the tData variable for the assignments in the stringstream. This
ensures that the correct data from the container is used.
3. Change the test value between the assign() calls to verify that the
container's contents are successfully overwritten.
These changes ensure, that the test cases are more accurate and
reliable.
Amends: 3b0536bbe8.
Change-Id: I9441c4818106bf93e93a1a5d2d2d54c89d80e7b0
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
... and remove all previous function-level occurrences.
Pick-to: 6.5
Change-Id: I90df40922e3aed15efc04e885d9f54c577a948b6
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
The desktop file name should not contain ".desktop" suffix, but some
applications still specify it anyway because of the ambiguity in the
documentation that was fixed in
0c5135a9df.
This change makes setDesktopFileName remove ".desktop" suffix so
desktopFileName always returns a desktop file name with correct format
and its users don't need to chop ".desktop".
Pick-to: 6.5
Change-Id: If5abccaf3bf976449cada8891fff887870e45b5f
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This patch relaxes the requirements on the context object of
continuations. Instead of having to stay alive during execution of the
whole chain, it now only has to stay alive during setup of the chain.
If the context object is destroyed before the chain finishes, the
respective future is canceled.
This patch works by using QFutureCallOutInterface and signals instead
of direct invocation of the continuation by the parent future, similar
to how QFutureWatcher is implemented.
If a continuation is used with a context object, a QBasicFutureWatcher
is connected to the QFuture via a QFutureCallOutInterface. When the
future finishes, QBasicFutureWatcher::finished() triggers the
continuation with a signal/slot connection.
This way, we require the context object to stay alive only during setup;
the required synchronization is guaranteed by the existing event and
signal-slot mechanisms. The continuation itself does not need to know
about the context object anymore.
[ChangeLog][QtCore][QFuture] Added support for context objects of
continuations being destroyed before the continuation finishes. In
these cases the future is cancelled immediately.
Fixes: QTBUG-112958
Change-Id: Ie0ef3470b2a0ccfa789d2ae7604b92e509c14591
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Create tests to check that the continuations attached to ready futures
are immediately executed, and that the proper handlers are selected.
These checks were missing from the overall test set, which was detected
while working on the linked issue.
Task-number: QTBUG-112958
Change-Id: Iae97e4b9dfb1e016869693a5162f72e027ca7f5e
Reviewed-by: Arno Rehn <a.rehn@menlosystems.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Mainly for completeness, but it has practical uses: someone retrieving
a QRhi instance from somewhere should be able to tell the
QVulkanInstance, and so the VkInstance, used by that QRhi without
resorting to investigating other objects (e.g. retrieving the instance
from the QWindow). This provides symmetry to other 3D APIs and QRhi
backends where just a single QRhi instance is sufficient to get the
MTLDevice, ID3D11Device/Context, etc. i.e. all that is needed to
work with the 3D API directly.
Change-Id: I5a8b9871a543ea648c76b868bf6ff7be5f2098f2
Reviewed-by: Jonas Karlsson <jonas.karlsson@qt.io>
Reviewed-by: Hatem ElKharashy <hatem.elkharashy@qt.io>
Otherwise individual sockets will still load system certificates when
a chain doesn't match against the configured CA certificates.
That's not intended behavior, since specifically setting the CA
certificates means you don't want the system certificates to be used.
Follow-up to/amends ada2c573c1
This is potentially a breaking change because now, if you ever add a
CA to the default config, it will disable loading system certificates
on demand for all sockets. And the only way to re-enable it is to
create a null-QSslConfiguration and set it as the new default.
Pick-to: 6.5 6.2 5.15
Change-Id: Ic3b2ab125c0cdd58ad654af1cb36173960ce2d1e
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Testing for "res_ninit" when WrapResolv.cmake has already checked for
far more complex functions was pointless. Instead, just accept the
library that was found by find_package() as good enough and rename the
feature as "libresolv".
Amends 4a46ba1209 and
68b625901f.
Change-Id: Ib5ce7a497e034ebabb2cfffd1762c0afa2fac6e0
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
We were getting InvalidReplyError because it was simply unknown, which
is not very useful. Previously, the Unix code used res_nquery(), which
does not return timeouts as a condition. It returns -1 if a timeout did
happen, but the content in errno could be a left-over from a previous
timeout (see the "Not a typewriter"[1] problem).
With the rewrite to using res_nmkquery() and res_nsend() from the
previous commits, we can rely on errno being set properly by
res_nsend().
$ $objdir/tests/manual/qdnslookup/qdnslookup @0.0.0.1
; <<>> QDnsLookup 6.6.0 <<>> qdnslookup @0.0.0.1
;; status: TimeoutError (Request timed out)
;; QUESTION:
;qt-project.org IN A
;; Query time: 10008 ms
;; SERVER: 0.0.0.1#53
Tested on FreeBSD, Linux, macOS, and Windows.
[1] https://en.wikipedia.org/wiki/Not_a_typewriter
Change-Id: I3e3bfef633af4130a03afffd175e31958247f9b1
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This test fails too frequently on Android and RHEL to leave in as
significant. The bug report is already closed after timeouts were
extended, so perhaps we just have to accept the status quo. No
point in keeping tickets open for tests that we can't get stable on
some platforms.
Pick-to: 6.5
Task-number: QTBUG-102239
Change-Id: I54b8ae821e93b3e1f24acd67a2e84ef405388667
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Amends e718818745, after which a context
menu was only shown if the format was rich text and there was a link at
the position of the click.
We always want to leave it up to the control to create a context menu,
so only return early if there is no control. The control will then
respect content at the position (i.e. link or not) and text interaction
flags, and create the menu based on that. I.e. a rich text label with
selectable text should still show "Select All" in the context menu, also
if not clicking on a link.
Add a test case to verify that the context menu event got accepted
as expected, which indicates that the label showed a menu.
Pick-to: 6.5
Change-Id: Ib2b36286e4f1253d10489b5add83e8cdd7197a06
Reviewed-by: Oliver Eftevaag <oliver.eftevaag@qt.io>
It's not needed, but makes the point for having a mutable lambda in the
first place.
Change-Id: I483862d6aee90bb62d4b5363c56a80bb05e14df7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The noTimerUpdates test has been quite flaky since the optimization
of single shot timers in 87535e4e43.
Since we run QNX tests in QEMU, it's hard to guarantee anything that
involves timers, so tagging that platform as one of those that have a
bad timer resolution.
Change-Id: I6567ea0dee859a207d4b9f659a02e805a2f87d63
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When forwarding a signal, associate this signal with its
enclosing metaobject instead of its sender's metaobject.
Those two may be different if the signal is declared in
a base class.
Add a regression test into tst_qdbusconnection.
Fixes: QTBUG-33142
Pick-to: 6.5
Change-Id: I532ab3bb6c0671a480568f46d63fceff0c82c097
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Make the QSqlDatabase::DriverDict thread-safe and make sure it's
properly cleaned up on destruction.
Pick-to: 6.5 6.2 5.15
Fixes: QTBUG-112961
Change-Id: I1ff70e477579231754ef829fdede944d6042894d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The 'font' is redundant here, and we don't prefix any other
properties like that.
Change-Id: Iee1f492b232e5bbcae399b472d7478406d8a81ef
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
I had to write a sample query test to ensure that those servers can be
reached. They can't from the my corporate network, for example:
QDEBUG : tst_QDnsLookup::setNameserver(normal) QHostAddress("8.8.8.8") discarded: "Network operation timed out"
QDEBUG : tst_QDnsLookup::setNameserver(normal) QHostAddress("2001:4860:4860::8888") discarded: "Network unreachable"
QDEBUG : tst_QDnsLookup::setNameserver(normal) QHostAddress("1.1.1.1") discarded: "Connection refused"
QDEBUG : tst_QDnsLookup::setNameserver(normal) QHostAddress("2606:4700:4700::1111") discarded: "Network unreachable"
This will also take care of ignoring the IPv6 servers on systems without
it (as above).
Change-Id: I3e3bfef633af4130a03afffd175de18af24add70
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
I couldn't make my Windows 10 or 11 query a non-standard port. It kept
complaining about "The parameter is incorrect.", so as a result the unit
test doesn't actually test the new feature there. I can't find a single
example of this on the Internet; my speculation is that the backend API
that DnsQueryEx uses does not support setting port numbers
(DnsQuery_{A,W} didn't offer that option).
[ChangeLog][QtNetwork][QDnsLookup] Added setNameserverPort().
Change-Id: I3e3bfef633af4130a03afffd175d60a581cc0a9c
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Check that we can navigate to rows and columns, and that we get the
right text back for cells.
We see API failures in CI on some macOS nodes, accompanies by the debug
message:
AXUIElementCopyAttributeValue( "AXTitle" ) returned error =
AXError(value=-25201, name=kAXErrorIllegalArgument,
description="An illegal argument was passed to the function.")
On hosts where the test fails, we always see this warning, so extend the
test helper with an errorOccurred boolean that we can test and if set
skip the test.
Pick-to: 6.5
Change-Id: Iacad4c41f8597243abeff36ca91cf290446c13a1
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Not entirely clear why, but when building the certificate chain for a
peer the system certificate store is searched for root certificates.
General expectation is that after calling
`sslConfiguration.setCaCertificates()` the system certificates will
not be taken into consideration.
To work around this behavior, we do a manual check that the root of the
chain is part of the configured CA certificates.
Pick-to: 6.5 6.2 5.15
Change-Id: I03666a4d9b0eac39ae97e150b4743120611a11b3
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
A * or a ? in a wildcard pattern is allowed to match any character,
including newlines. When converting a wildcard pattern to a PCRE,
* and ? were converted to ., which by default does _not_ match over
newlines (/s is necessary).
There isn't a metacharacter that matches everything, so either we modify
the returned pattern to enable dot-matches-all (for instance, by
wrapping the returned expression in (?s:...)), or use a character class
that includes everything. Picking this last approach for simplicity.
Change-Id: I86703f654e3414783427c4c8e0bb018885b42e54
Fixes: QTBUG-113676
Pick-to: 6.5
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Commit 29b2fe40dc disabled it by reverting
commit d6bf71123d. We now add the promised
flag to opt-in. The flag is added to all Unix systems, but it really
only applies to Linux right now.
No ChangeLog because the whole UnixProcessParameters structure is new
and has its own changelog.
Task-number: QTBUG-104493
Task-number: QTBUG-111243
Task-number: QTBUG-111964
Change-Id: Icfe44ecf285a480fafe4fffd174d4effd3382495
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
This commit adds those three flags that are either frequent enough or
difficult to do: close all file descriptors above stderr and reset the
signal handlers. Setting SIGPIPE to be ignored isn't critical, but is
required when the ResetSignalHandlers flag is used, as this is run
after the user child process modifier.
[ChangeLog][QtCore][QProcess] Added setUnixProcessParameters() function
that can be used to modify certain settings of the child process,
without the need to provide a callback using setChildProcessModifier().
Change-Id: Icfe44ecf285a480fafe4fffd174d0d1d63840403
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
In QAccessible's widget implementations, trees are treated as tables,
with a rowCount implementation that is based on the view's current
item content. That item content is the view's content, not the model's,
and it changes when tree branches are expanded.
The Cocoa bridge for accessibility allocates arrays of row data
structures based on the rowCount implementation. Those data structures
need to be invalidated and recreated when the view's content changes.
To do that, emit an accessibility event for a model reset when laying
out items changes the size of the view's item array. We don't know what
changed during that layout process to makes this any more granular.
Amends 11ae55e918, but the problem
with the data structure being stale and incorrect would have been there
before that chain of changes optimizing. It didn't trigger an assert,
but probably resulted in incorrect data being reported.
To make trees testable, we need to actually expose them as AXOutline
to the macOS accessibility framework. Until now, they have been treated
like plain QWidget, e.g. AXGroup. This made them in practice in-
accessible. With this change, VoiceOver works much better (although not
perfeclty yet).
Also remove an assert that could be triggered by an accessibility
client asking for a cell for an invalid index (which can be reproduced
by navigating around in a tree, following debug warnings from
QAccessibleTree::indexFromLogical: invalid index).
Pick-to: 6.5
Change-Id: I7650342aa0dcd7925a94ae6a36de5a0b344c467d
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This makes it a bit easier to know what's going on when debugging.
Pick-to: 6.5
Change-Id: I5955b9b590c7aea584748f36e4fe15d41fd05ac1
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The color role AccentColor has been added to QPalette.
This patch implements the new color role in QCssParser and subsequently
in QStyleSheetStyle.
The QBrush variable names used to populate brushes, have been changed
into speaking names for better code readability.
tst_QCssParser has been adapted accordingly.
The test function accentColor() has been added in tst_QStyleSheetStyle.
Documentation has been updated.
Change-Id: Ib09ddc1b61868f2bb8f70f654e83ea1c35276d30
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
It is necessary to add an AccentColor role to QPalette.
QPalette currently has 21 color roles and 3 color groups, which
require 63 bits to resolve. The resolve mask is implemented with a
qint64, which doesn't provide spare bits for another color role.
The color role NoRole is used as a default value, marking that a role
has not (yet) been defined. The enum value does not represent a valid
brush, even though it can theoretically be stored in QPalette's shared
data.
This patch adds the enum value AccentColor to QPalette::ColorRole,
increasing the available color roles to 22.
To keep the resolve mask at 63 bits, AccentColor is mapped to NoRole
in static constexpr bitPosition.
As the enum range would exceed 64 bits without this tweak, 3 additional
bits are substracted in the respective static assertion.
With NoRole having no bit in the resolve mask, the following adaptions
have been implemented:
- QPalette::resolve() is adapted to explicitly ignore NoRole.
- QPalette::isBrushSet() always returns false for NoRole.
- tst_QPalette::setAllPossibleBrushes() to verify the latter
- operator== ignores NoRole (documentation updated)
AccentColor is added in tst_QPalette::roleValues and enum documentation
is adapted.
In QPalette's default constructor, the AccentColor brush is defaulting
to the Highlight brush, it this is available. Otherwise it is made 30%
darker or lighter than the Base brush, depending on dark/light mode
heuristics.
QPalette's data stram functions have been extended from QDataStream
Version Qt_6_6. If earlier versions are de-serialised, the AccentColor
defaults to Highlight. An autotest function dataStream() has been added
to tst_QPalette.
The QDataStream Version Qt_6_6 has been bumped to 21.
tst_QDataStream has been adapted to the new version and the new
color Role.
Change-Id: I98bbf9de95fb83bda921e9614a0db3a3c0ebdf75
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
qrhi.h, qshader.h, qshaderdescription.h (and qshaderbaker.h from
shadertools; done separately) become "RHI APIs", following the concept
of QPA APIs.
Mirror completely what is done for QPA headers, but using the "rhi"
prefix for the headers. This involves updating syncqt to handle the
new category of headers. (a note on the regex: matching everything
starting with "qrhi" is not acceptable due to incorrectly matching
existing and future headers, hence specifying the four header names
explicitly)
There is going to be one difference to QPA: the documentation for
everything RHI is going to be public and part of the regular docs, not
hidden with \internal.
In addition to the header renaming and adding the comments and
documentation notes and warnings, there is one significant change
here: there is no longer a need to do API-specific includes, such as
qrhid3d11[_p].h, qrhivulkan[_p].h, etc. These are simply merged into a
single header that is then included from qrhi.h. This means that users
within Qt, and any future applications can just do #include
<rhi/qrhi.h> (or rhi/qshader.h if the QRhi stuff is not relevant), no
other headers are needed.
There are no changes to functionality in this patch. Only the
documentation is expanded, quite a lot, to eliminate all qdoc warnings
and make the generated API docs complete. An example, with a quite
extensive doc page is added as well.
Task-number: QTBUG-113331
Change-Id: I91c749826348f14320cb335b1c83e9d1ea2b1d8b
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
[ChangeLog][QtCore][QUuid] Added support for converting between QUuid and
quint128, on platforms that offer 128-bit integer types (all 64-bit ones
supported by Qt, except MSVC).
Change-Id: Id8e48e8f498c4a029619fffd1728c9553e871df5
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
While std::vector::assign() returns void, std::basic_string::assign()
returns std::basic_string&. In Qt, we want to be consistent between
{QVLA,QList,QString,QByteArray}::assign(), and returning *this is the
more general solution, so do that.
Task-number: QTBUG-106196
Task-number: QTBUG-106200
Change-Id: I2689b4af032ab6fb3f8fbcb4d825d5201ea5abeb
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
This removes the last use of QtPrivate::convertToMilliseconds().
Change-Id: I6f518d59e63249ddbf43fffd1759fee2e00d36f4
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
Implemented assign() methods for QList to align with the criteria of
std::vector, addressing the previously missing functionality.
Reference:
https://en.cppreference.com/w/cpp/container/vector/assign
[ChangeLog][QtCore][QList] Added assign().
Fixes: QTBUG-106196
Change-Id: I5df8689c020dafde68d2cd7d09c769744fa8f137
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This file, like the majority of qtbase, uses a space between template
and the opening of the template argument list. Add it.
Change-Id: I927cb2b1b9620ae108e913343d995373493e8981
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
It adds nothing new to what the trivial and license wizard examples
show, other than a bunch of somewhat messy and outdated code to generate
C++ code files based on the input.
The example is referenced in a few parts of the documentation, but there
are equivalent snippets in the trivial and license wizard examples, so
point at those instead, and add some relevant API usage where needed.
Pick-to: 6.5
Change-Id: If1ff57e775bad28920d9e019aeccae69d1f4d127
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
