QAbstractItemView::setIndexWidget() does not trigger a relayouting when
a new widget is set. This results in a wrong editor geometry under some
circumstances. Fix it by triggering a delayed relayout.
Fixes: QTBUG-81763
Change-Id: I75d0e19bd5e56d63effe4990d782d202fb39e3e6
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
0. The recent patch fixed the case when we can suddenly (meaning from
a particular version of Darwin) bind on a port number 1. Unfortunately,
it's not the case for IPv4 and while fixing one test case, the patch broke
another - so this patch addresses this.
1. Unfortunately, binding on a fixed port 1 on macOS made the test flaky
- we run this 'bind' several times and sometimes OS thinks port is already
bound (because of the previous test case) - closing the connection seems
to fix this problem (thus this patch do this also).
2. As a bonus a proper resource management added (aka RAII) where we would
previously leak a socket in case some QCOMPARE failed.
Fixes: QTBUG-81905
Change-Id: I90c128a332903bb44ab37de4775ca00d390dc162
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Make the test operate in its own temporary directory, so that entries
left behind by other test functions don't impact this test.
Also, call QFileSystemModel::sort explicitly; it would otherwise only
be done once through a single-shot timer, and the test processes events
until the model is populated, which might not process that delayed
sorting. Since dirsBeforeFiles tests the sorting algorithm and not
the sorting logic, best to do this explicitly.
In case of sort failure, print diagnostics.
Done-with: Friedemann Kleint <Friedemann.Kleint@qt.io>
Fixes: QTBUG-75452
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
(cherry picked from commit 4e796e0b0d)
Change-Id: I144b68a17280a38cc7d6daf7ec343eea4453623d
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
We observe this happening on macOS in the CI system, and it might happen
if a VM doesn't get CPU cycles for long enough time so that two timers
time out. Then event processing will process two timer events, and we
overwrite the timerIdFromEvent with the second event.
Instead, skip the test when this happens.
This is an ammendment to 5c520f4b0a
Fixes: QTBUG-71751
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
(cherry picked from commit 67491e2df5)
Change-Id: I30eef8cfc94988e6cad500dd5e6722488c2985be
On macOS, the registerTimer test case fails frequently, and blocks
valid integrations. With this change we try to detect the condition
and skip the test.
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
(cherry picked from commit 5c520f4b0a)
Change-Id: I97644b5b4654b4c96fbc99858bbf191e6edb5977
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Modeled after QRhiTexture's NativeTexture query.
This becomes valuable in advanced cases of integrating external native
rendering code with Qt Quick(3D), because it allows using (typically
vertex and index) buffers created by Quick(3D) in the custom renderer as
well, without having to duplicate the content by manually creating native
buffers with the same vertex and index data.
Change-Id: I659193345fa1dfe6221b898043f0b75ba649d296
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Add a new queriable resource limit value MaxAsyncReadbackFrames. Change
the autotest to rely on this instead of relying on the unspecified,
works-by-accident relation between readbacks and FramesInFlight. This
way even if the behavior diverges in some backend in the future, clients
(well written ones, that is), will continue to function correctly.
Also clarify the docs for FramesInFlight, and change d3d and gl to return
the correct value (which is 1 from QRhi perspective; the expanded docs now
explain a bit what this really means and what it does not).
Change-Id: I0486715570a9e6fc5d3dc431694d1712875dfe01
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
After 4e796e0b0d we only have blacklisted
passes in the database, and no flaky failures on macOS.
Exception is WinRT, which stays blacklisted.
Change-Id: Ie1c492d20c76d4ba12b3f513ac038f023b864cb1
Reviewed-by: Dimitrios Apostolou <jimis@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Widgets have a default palette and font that is influenced by several
factors: theme, style, QApplication-wide overrides, and the parent's.
If an application sets a font or palette on a parent, then widgets
inherit those settings, no matter when they are added to the parent.
The bug is that this is not true for widgets that have an application-
wide override defined by the platform theme. For those, we need to merge
parent palette and font attributes with the theme, and this is currently
not done correctly, as the respective masks are not merged and inherited.
This change fixes this for fonts and palettes. Children are inheriting
their parent's inheritance masks, combined with the mask for the
attributes set explicitly on the parent. This makes the font and palette
resolving code correctly adopt those attributes that are set explicily,
while leaving everything else as per the theme override.
The test verifies that this works for children and grand children added
to a widget that has a palette or font set, both when themed and
unthemed. Children with own entries don't inherit from parent.
The QFont::resetFont test had to be changed, as it was testing the
wrong behavior. If the child would be added to the parent before the
font property was set, then the test would have failed. Since this
change makes sure that children inherit fonts in the same way, no
matter on when they are added to their parent, the test is now
modified to cover both cases, and ensures that they return identical
results.
[ChangeLog][QtWidgets][QWidget] Fonts and palette settings are inherited
by children from their parents even if the children have application-
wide platform theme overrides.
Change-Id: I179a652b735e85bba3fafc30098d08d61684f488
Fixes: QTBUG-82125
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Vitaly Fanaskov <vitaly.fanaskov@qt.io>
Currently QShaderGenerator will crash when encountering some expressions
in input nodes.
For example, this node prototype would make it crash:
"VERTEX_COLOR": {
"outputs": ["color", "alpha"],
"rules": [
"headerSnippets": ["in vec4 vertexColor;"],
"substitution": "vec3 $color = vertexColor.rgb;
float $alpha = vertexColor.a;"
]
}
Change-Id: I37abb8099d376843a4cb13228140467dc1b8f60c
Reviewed-by: Paul Lemire <paul.lemire@kdab.com>
It was already possible to declare a node prototype with multiple
outputs, but trying to assign to all those outputs was not possible and
instead resulted in a crash.
It is now possible to declare nodes like this without crashing:
"SEPERATE_XYZ": {
"inputs": ["vector"],
"outputs": ["x", "y", "z"],
"rules": [
{
"substitution": "float $x = $vector.x;
float $y = $vector.y;
float $z = $vector.z;"
}
]
}
Change-Id: I748e77e84c9120dc688c573eee33dc13c6bfbace
Reviewed-by: Paul Lemire <paul.lemire@kdab.com>
If a widget backed by a QWindow is moved we need to translate the window
geometry into a position relative to the parent widget. In most cases this
was incidentally working due to widgets backed by QWindows always having
QWindow parents too, so the QWindow position was applicable to the widget
as well. But when Qt::WA_DontCreateNativeAncestors is used this is no
longer the case, and we would end up with a widget geometry that included
the parent positions all the way up to the next native widget.
The updatePos() function has been squashed into handleMoveEvent(), since
we need to ensure the position in the move event sent to the widget is
correct as well.
Change-Id: I55894ad7ab42a6d4d65e446a332ecdd7dcdcc263
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This fixes the shader generation for graphs like this one:
Function0 ------> Output0
(with unbound input)
Input ------> Function1 ------> Output1
With those graphs, createStatements will not return any statement for
nodes Function0 and Output0.
Change-Id: Iec32aa51623e176b03ae23e580f06d14df80a194
Reviewed-by: Paul Lemire <paul.lemire@kdab.com>
Ensure that each image plugin really clips within the scaled coordinate
system, as documented. Always clipping from 0,0 wasn't interesting.
Task-number: QTBUG-81044
Change-Id: Ic06fe52f92f719e1ff9c0348f667215e53b60fb0
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
QShaderGenerator didn't handle substitutions like
`vec4 $color = mix($color1, $color2, $fac);`
Note that `$color` is a prefix to `$color1` and `$color2`. For the
substitution `QByteArray::replace` was used so if `$color` was handled
first and replaced by `v1`, `$color1` and `$color2` were never correctly
replaced and instead became `v11` and `v12` which caused a crash later
on.
Change-Id: Idaf800fdac468f33c323eb722701da5f8eb918d6
Reviewed-by: Paul Lemire <paul.lemire@kdab.com>
By sending it to all top level windows it will make it possible for
non widget based controls to listen for this event if it cares about it
so it can handle translation updates as appropriate.
Task-number: QTBUG-78141
Task-number: QTBUG-82020
Change-Id: I8f35cdcccd81a199ff780c3f4f3d2c663480d638
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
This test fails sporadically on OpenSUSE, with the widget receiving
multiple resize events. Assuming that window management kicks in at
unpredictable moments and changes the geometry of the managed widget
possibly in several steps, we try to turn off all window management
on X11.
Change-Id: I7d2120c02eb870040b2ee94986a2ac5608d5a423
Fixes: QTBUG-66345
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
For graphs like this one:
Input ----> Function1 ----> Output
\
---> Function2
(unbound output)
We would have generated only 2 statements, for Function1 and Output.
This change fixes this by treating Function2 like an output.
Therefore it generates 4 statements: Input, Function1, Output and
Function2.
Change-Id: Iaada40b9b949d771806dd47efad4f7ef2a775b48
Reviewed-by: Paul Lemire <paul.lemire@kdab.com>
QUtf32::convertToUnicode() was forgetting to set headerdone when it
dealt with the header (for contrast, Utf16::convertToUnicode() does).
Fixes: QTBUG-62011
Change-Id: Ia254782ce0967a6cf9ce0e81eb06d41521150eed
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Apple changed on macOS 10.14 (Mojave). Windows has always allowed.
Fixes: QTBUG-81905
Change-Id: I572733186b73423b89e5fffd15f12fee3f03c055
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The comment in QNativeSocketEnginePrivate::fetchConnectionParameters()
talked about IPv6 v4-mapped addresses. However, toIPv4Address also
converts the unspecified address (::), which resulted in QAbstractSocket
saying that it had bound to QHostAddress::Any instead of
QHostAddress::AnyV6
Change-Id: I572733186b73423b89e5fffd15f138579c5c0c50
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
So far, objects had no identification, and both gadgets and namespaces
were called "gadget". qmltyperegistrar, however, is especially
interested in the distinction between namespaces and anything else.
Task-number: QTBUG-68796
Change-Id: Ic5739727bdef7766de6e535c6568920198fadb2b
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
We observe this happening on macOS in the CI system, and it might happen
if a VM doesn't get CPU cycles for long enough time so that two timers
time out. Then event processing will process two timer events, and we
overwrite the timerIdFromEvent with the second event.
Instead, skip the test when this happens.
This is an ammendment to 5c520f4b0a
Change-Id: Ibc1169b5458c8dce9d4fe9ce715f49c396e17b86
Fixes: QTBUG-71751
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
...and merge the two overloads of getDouble() in Qt6
Change-Id: I55faa2ff222b41e48889a0ef14dd00a6da691c36
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Make the test operate in its own temporary directory, so that entries
left behind by other test functions don't impact this test.
Also, call QFileSystemModel::sort explicitly; it would otherwise only
be done once through a single-shot timer, and the test processes events
until the model is populated, which might not process that delayed
sorting. Since dirsBeforeFiles tests the sorting algorithm and not
the sorting logic, best to do this explicitly.
In case of sort failure, print diagnostics.
Change-Id: I44c2b82ef1330cc8787aed2b5cbf109ef3a67876
Done-with: Friedemann Kleint <Friedemann.Kleint@qt.io>
Fixes: QTBUG-75452
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This reverts commit 0de6c26ac1.
The patch fixes ambiguity between a getter and a signal by changing the
getter name, but we still have to rename the signal to follow the signals
naming convention.
Revert the commit to keep the getter as is and change the signal name instead.
Change-Id: I67dbb5cada25da473bdd02e71b1e2d9bd03f039e
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This allows for instance to show the current UI language in the UI,
or to load additional translations that match the .qm file by other
means.
This is especially useful in the case of QTranslator::load(QLocale(),
...), in which case different language and country combinations might
be tried.
Another option is to inspect the file name via QTranslator::filePath();
however, this is more error-prone, and might also miss information
(if the .qm file name doesn't have a country suffix, or no suffix at
all).
Change-Id: I6f565d53d8f50e21241ccae6c4de264747ac8f81
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Some Qt classes already accept std::chrono durations in their methods
(see, for example, QTimer). The proposed change adds an overload
with std::chrono::milliseconds to QStateMachine::postDelayedEvent().
Change-Id: I360fd2bb54fedc7415e9ec17e096095be3604d41
Reviewed-by: Erik Verbruggen <erik.verbruggen@me.com>
There were a few surprises:
- QByteArray::compare() are missing noexcept (will add)
- ibid., called with non-ascii content and CaseInsensitive fails
(this was discussed on the ML, with tentative agreement that
it's a feature, not a bug; waiting for QUtf8String(View) for a
fix, then).
- As was the case when we did this exercise with the relational
operators, QString(Ref)/QChar is not noexcept (will fix)
These have been QEXPECT_FAIL'ed.
Not much of the cartesian product is implemented at all, yet. These
have been #ifdef'ed with NOT_YET_IMPLEMENTED to see what's still
missing.
Change-Id: I7d9b21e292b98f980aacdc6248e88188f7472ba2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Moving a file to the trash should preferably done via IFileOperation.
However, the implementation on Windows 7 ignores the operation flags
that request the shell not to show any confirmation dialogs or other UI
elements.
SHFileOperation is an old API that doesn't show any UI, but has the
limitation that it doesn't report the location of the file in the trash
after the move. So an application cannot restore the file, but the user
can do so via Explorer.
Overall, the better compromise is to not have dialogs at the expense of
not being able to report the new path. This allows us to run the unit
test on Windows 7 as well.
Change-Id: Ib8e651a69e2c6750f668b52d2a70925d156cc8ae
Fixes: QTBUG-81927
Reviewed-by: Vitaly Fanaskov <vitaly.fanaskov@qt.io>
On macOS, the registerTimer test case fails frequently, and blocks
valid integrations. With this change we try to detect the condition
and skip the test.
Change-Id: Id2065f606abfd431971becf63034a4c1f0fdb9e5
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The font change in QComboBox might cause incorrect appearance of popup
menu since it doesn't notify popup menu to relayout itself
Fixes the issue by send font change event to the item view of popup
menu when received a font change event in QComboBox
Fixes: QTBUG-75846
Change-Id: I4821015cca95a7e233a22262596a6fbf27f10aef
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The test orchestrator shouldn't have to deal with the individual options
needed for each test.
Change-Id: I78bbf4850cc649e625bd08a7aedf02267ba1314d
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Change-Id: I2fd7a39684bde44d82c4d877086f606413d68520
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
These tests are apparently not run at the moment, otherwise they would
have failed to even start, but they should definitely not have the tst
prefix.
Change-Id: Iafcec2764ebb3570e6bc6ebfba27d92a94639893
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Those types are used as properties of Q(Date)TimeEdit,
QKeySequenceEdit.
Fixes: PYSIDE-1215
Change-Id: I8b9ffebb8229fff447aa7dd6bee6e037d708333c
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
In tst_QLocale::windowsDefaultLocale(), we configure the long and
short date formats and the short time format eccentrically, then
verify that QLocale::system() does actually get these eccentric
formats. However, we did not configure the long time format (whose
MS-API name doesn't match that of the other formats), so had to rely
on a guess at the system locale's format. That, however, is not
robust; so now configure the long time format, too.
Removed a duplicated test, at the same time.
Fixes: QTBUG-36306
Change-Id: I04dc22c7eb1b58af55412b598873868f79e9c74f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
