Use QWidget::isVisibleTo(parent) instead of isVisible(), just like
QAbstractScrollArea::replaceScrollBar() does. This removes the need
of using QCoreApplication::processEvents() to deliver the actual
hide event just for testing if the scrollbar was requested to be
hidden as it should.
Change-Id: Ie9a816e7b871d280a4b3d9d76adb10601915bd56
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Reviewed-by: Caroline Chao <caroline.chao@digia.com>
As recommended by Giuseppe, don't rely on the env var, but use the
internal but exported seed atomic int. This way, the compiler will
detect breakages, rather than runtime.
Change-Id: Iec2bc88c53532d3463d2dc5c73631fc9bc34747b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A pointer to the data of one qimage is used, with an offset, in a copy.
In the mono case, that could lead to overflow: the last row would
of the copy would stretch 1 byte beyond the end of the allocated
area. Fix by reducing the height of the copy, so that it keeps
within the allocated memory.
Task-number: QTBUG-28322
Change-Id: I09abfc83f738f8af000fc50f8c94f63dba3a6cfe
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
... with respect to empty and null strings.
Change-Id: Ic107d5bcc8b659497a567b75a7244caceba5a715
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Make windows frameless so that size constraints for
decorated windows do not interfere.
Task-number: QTBUG-28696
Change-Id: Ic4410d8a6e8166bdfe013ed2362173f8e02d4b29
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Increase tolerance on Windows for the Aero style.
Set small top level widgets frameless to avoid warnings
about minimum size of decorated windows on Windows.
Task-number: QTBUG-28611
Change-Id: Ia4aec0cf0763da9955577054cb8cf81337fac134
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
Avoid failures caused by minimum window widths on Windows Areo/8.
Task-number: QTBUG-28611
Change-Id: I9affcce84ab804a45fa1a12fb93ad0136e6ae877
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
When disconnect()ing through a QMetaObject::Connection, if the
QObjectPrivate::Connection contains a slot object, deref it, so
that it will be destroyed before the next run of cleanConnectionList.
Previously, a copy of the functor passed to connect() was kept until
QObjectPrivate::cleanConnectionLists was called (by adding a new signal,
or the sender was destroyed), even after a successful call to
disconnect(). That is, we were keeping that copy allocated without
any good reason.
Change-Id: Ie6074ea797df1611cb995dec07c5b5a742360833
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The QObjectPrivate::Connection refcount was not decreased
when disconnect()ing, therefore it was kept alive by the
owning QMetaObject::Connection object.
This removes a leak in case the QMetaObject::Connection
survives the sender object, after a successful disconnect().
Change-Id: Ie2ea59b269a0e589ae23c1457df7533be77c0797
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
More QVERIFY()s were added in the meanwhile to the test function,
so we can drop this one.
Change-Id: If6f137f45ba606b61d6a7004556a667ed316b61f
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
qt is already added by spec_pre.prf, warn_on and depend_includepath by
default_pre.prf.
Change-Id: Ic00e0ba496d698ed9659c476f2ca99fc0f86a093
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Makes tst_qgraphicsitem::tst_focusProxyDeletion not crash.
valgrind reported the error when running tst_qgraphicsitem. The crash
was very real; when deleting an item that has another item as a focus
proxy, the proxy still had a reference to the deleted item's focusProxy
pointer. I'm not a huge fan of whitebox testing but thought this crash
justifies a modification of the test to make it fail, instead of just
passing silently with a warning only given by valgrind and friends.
FTR the reason the test doesn't crash hard is that the memory is freed
but not reused within the scope of the test. So the access to the
pointer d_ptr->focusProxy succeeds, it just accesses memory that might
as well have been reclaimed. But this is quite undefined...
Task-number: QTBUG-28321
Change-Id: I2624631f5e5c2a8aa8bd4efe1fc128eba6c61f56
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
For moc, rcc and uic, then it's friendly for tools like ccache.
ccache is using md5 to check file modification, but the different
timestamp info will cause different md5 for same meaningful
contents, it will disabled ccache.
Updated the autotest for uic and rcc.
Task-number: QTBUG-26589
Change-Id: I9f1dcf6cd826ad9603af6e183757bcd748c32bd1
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
We need to do bounds comparison on the actual offset we're going to use
with _mm_load_si128 to read 16 bytes from memory (even though we won't
use the trailing bytes in the end).
Task-number: QTBUG-28324
Change-Id: Id0d6094da796ca67338d8ad225fa6b2f309bbe6e
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Change-Id: Ib05a120db16f65d9833663445c028971d4de3d29
Reviewed-by: Jonathan Liu <net147@gmail.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Avoid QHash randomization so that the order of the XML attributes is stable
This was causing intermittent failures.
Change-Id: I4cc0dba4b0c2ec36601f3b06fb17ff80005cc9fb
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
This increases consistency a lot: all windows and dialogs from a Qt
application will show the app display name in the caption, on Windows and X11.
This helps identifying which app a dialog belongs to, which is especially
useful when the dialog is very generic and shows up unexpectedly.
For compatibility reasons, the app name is added to the caption only
if setApplicationDisplayName() was called -- or if the caption would be
completely empty. The standard Qt4 case (setWindowTitle + no display name)
is unchanged.
Change-Id: Ib284c62c1f4c0bc923e5bc2d10247d95e9aa76c1
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
This test fails on some setups and a pending critical change
causes the existing bug to trigger in CI. To avoid blocking
other changes because of this bug, it's been marked as
insignificant until such a time when it can be fixed.
Change-Id: Ide41f7b1c76209f9c05f95f996b2364d5dea5e67
Reviewed-by: Liang Qi <liang.qi@digia.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
We also need to detach() the taken value in case the compaction triggers and
modifies the underlaying data.
Change-Id: Idcdeba4236b8e208d107d41be2decbdfc5721300
Reviewed-by: Bjørn Erik Nilsen <post@bjoernen.com>
Reviewed-by: Denis Dzyubenko <denis@ddenis.info>
These tests have been failing on certain setups for a while,
but some new critical changes causes the failure to trigger
on the CI system as well. We mark them as insignificant until
they can be fixed.
Change-Id: I467e7030c55d6f23515275b4062c17068d2b688c
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
When clicking at the bottom-right corner of a menu in a menu
bar, it appears at the wrong position. Add test and stabilize
RTL-tests by making sure the layout direction is cleared should
they fail.
Task-number: QTBUG-28031
Task-number: QTBUG-2596
Change-Id: Ibc5ae916388753908e9f3ee98e8859faaa0c8723
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The stepSize property was missing in Qt 4 and is
a sensible addition to the value interface.
Change-Id: I7571800d50ee7e4194c09c4db40300809a1ce45a
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
so other modules can actually re-use the code without referencing qtbase
sources.
Change-Id: Id66f07b476e539273dd32455e7642a17d7e5d0ef
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
this is a compile-only test, and it's not even marked as a testcase in
the autotest system.
Change-Id: I9b48ddad3c8e3e953d0e6fcfa010bab73289bc6f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Commit 0696071316 moved away from QDom but
also lost the ability to fill the introspection field of the created
QDBusIntrospection::Interface instances. This commit now generate the
string again as we proceed with the QXmlStreamReader based parsing.
Task-number: QTBUG-26668
Change-Id: I8f406e1f4e9d3e667a8557db69da36cac369ba4f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
With the change cff46983a, prepared queries can now store a
named paramater to be used more than once.
When using ?, thus positional binding, there is no named
parameter, thus there is no need to store it.
When prepare is called from a query with ?, it currently
causes an error when the feature QSqlDriver::NamedPlaceholders
is true. Because holders values are called while holders is
actually empty.
QSqlDriver::NamedPlaceholders is true for QOCI plugin only
but the problem is independant of the plugin used.
Adding a test case with a test driver to make the test runnable
without Oracle installed.
Change-Id: I6d7491f7e09a7b62d2d4d216b40fedd67e927e27
Reviewed-by: Matt Newell <newellm@blur.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
There are no proper implementations of this API, and as it stands it
only acts to confuse anyone who stumbles across it. It will be better to
revisit the full cross platform orientation API story for 5.1.
Change-Id: Iff7054a32c6e5e4ad0cc0493a5e4ecc35a6ec4f3
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
The address behind a string doesn't point to a string.
Change-Id: Ic54f652ae781fea278f60cc49d219c1c610ba29f
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
This makes QT_PLUGIN_PATH / QCoreApplication::libraryPaths() actually work,
as a search path for plugins, when apps look for a specific plugin by name.
To make it possible to write portable code (unlike the current QPluginLoader
unittest), let QPluginLoader figure out the extension, too.
Change-Id: I895d597d7cb05ded268734bc5f313f32d8d12cb9
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
The QSslSocket one is both wrong and redundant as there is a
Q_DECLARE_METATYPE for it already.
Change-Id: I63d065abfb3d0e3d82a8b1f29a6752b7676db847
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
there is no point to use this for in-module references.
cleaning it out in an attempt to purge the constants entirely.
Change-Id: I1da4d70e3778257dd43eda0bdfc71eaec1124732
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
we were already installing them into QtCore/private, so turn them into
proper private headers to start with. this cleans up our project files.
Change-Id: I0795f79e03b60b5854de9e4dc339e9b5a5e6fd87
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
A focus scope has effective focus if one of its children is the focus item,
clearFocus() should remove effective focus from an item and its children
not just from the focus item.
Task-number: QTBUG-28328
Change-Id: I62a292eff000151e50b2f5221e22f326a380fc3a
Reviewed-by: Martin Jones <martin.jones@jollamobile.com>
Also change Trolltech for QtProject in other places
Task-number: QTBUG-23269
Change-Id: Ie4e344f23cab77c575562d18b481b3369ce30491
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
QStackedLayout doesn't have support for QLayout, only QWidget, so
the issue doesn't arise there.
Reported-by: Johannes Schaub
Task-number: QTBUG-27420
Change-Id: I71f8d10a036918c16d8f8c9197a2ec61cd76cf01
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Execute the test in a temporary directory, purge remaining files
except the special readonly-files in cleanup().
Avoid repeated invocation of QFINDTESTDATA() by assigning to
member variables.
Do more checks in rename(), check on contents of file.
Generally, use more QVERIFY2, print error messages.
Task-number: QTBUG-3570
Change-Id: Ibd0e11a361208a716ea3efbcca76adeda70e061a
Reviewed-by: David Faure (KDE) <faure@kde.org>
Since QtOpenGL/QGLContext is implemented in terms of
QtGui/QOpenGLContext which has stricter requirements about how it's
supposed to be used, we need to apply these requirements to QGLContext
as well.
This change adds QGLContext::moveToThread(QThread *) and documents it as
a necessity for making a context current on another thread.
Also introduces QGLPixelbuffer::context() to access the QGLContext of a
pixelbuffer, and made QGLWidget::context() return a non-const
QGLContext, since there's no good reason why it shouldn't, and it leads
to less const_cast clutter.
We could have introduced a backdoor in QOpenGLContext instead, making it
loosen its requirements, but that would have made it harder / impossible
to fully support threaded OpenGL in all the platforms.
Task-number: QTBUG-22560
Change-Id: Ibb6f65f342e7c963e80cc42ab5664c5f1cab30b0
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
