The test has one stable failure. Mark it with QEXPECT_FAIL and
re-enable the test.
Task-number: QTBUG-23681
Change-Id: Iade17cbbd1570863bb628572d8da52ec9c0f62ba
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
This test function recently became unstable in parallel with the change
to re-enable the test. Skip the unstable function until it can be
fixed.
Change-Id: I0fb962aa3294a0c9b799acee52ab1fb1cd1c6924
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
This test has only stable failures on Mac. Mark those failures with
QEXPECT_FAIL and re-enable the test.
Task-number: QTBUG-25298
Change-Id: I1c768226dfeb9307386e8853091baa68936bed29
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Previously the method attempted to reset only as a last resort.
Now reset() is deprecated and resetting must happen between emitting
modelAboutToBeReset() and modelReset(). Since this suffices in all
cases to notify views that they must reinterrogate the model, it is no
longer necessary to signal explicitly row removals and insertions
within the scope of the reset.
Additionally, fetchMore() is now called within the scope of the reset
so insert signals do not have to be emitted here either.
This improved handling of resetting in QSqlQueryModel also allows the
cache in QSqlTableModel to be cleared directly at select().
This change may actually allow views to operate more efficiently since
they no longer have to react to separate row removal and insert
signals. Views can avoid pointless deallocation and reallocation
by considering row count only after the reset is finished. The cost is
that the columns and horizontal headers must be considered in the view
at each setQuery() call. In any case, it is not clear that trying to
be smart about this in the model justifies additional complexity.
Tests had to be adjusted where they expected explicit row removal
and insert signals.
Change-Id: I4f7eac1419824361d7d9bdcc6a87092b33e80d7a
Task-Id: QTBUG-25419
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Honglei Zhang <honglei.zhang@nokia.com>
This will allow the CI system to run the tests. The tests are only
run if cmake is found.
Change-Id: Ie73a56114c151871160bafcbf0b90b2d54620855
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
These tests were disabled when trying to get CI working on Mac OS
because they asserted or crashed. Now that CI is working well on Mac
OS, start running these tests again, initially as insignificant tests.
CI results will then be used to determine whether the tests can be made
significant.
Change-Id: Ife411e6b8c84ade45c865ef35f3ae0071d6f8d2b
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
On Windows, the test had a stable failure and an XPASS related to an
already closed bug report. On Mac, the test had one stable failure, on
the same statement that had the XPASS on Windows. On Ubuntu, the test
has been passing consistently.
Mark the stable failures with QEXPECT_FAIL, remove the QEXPECT_FAIL that
causes the XPASS, and remove the insignificant_test markers to re-enable
the test.
Task-number: QTBUG-24296
Change-Id: I05dd16b39296919268fee216332929df591f2b66
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Calling peek() for qsslsocket caused socket data to be copied into
qiodevices buffer and therefore make it unaccessible in qsslsocket.
Cherry picked form 4.8-branch & modified to Qt5 API changes
(int -> qintptr)
Original commits:
commit 621f18955082fc73471e75d1f8c35c2dcd4befeb
Author: Shane Kearns <ext-shane.2.kearns@nokia.com>
commit 68b1d5c17aa38d5921bdade2b0e0cb67c6c90513
Author: Kalle Viironen <kalle.viironen@digia.com>
Task-number: QTBUG-18498
Change-Id: I6be4b19baec2f3197537f5e7b61432040ec84ad2
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This test was marked insignficiant on Ubuntu 11.10, but the only failure
was an XPASS. Make the test significant again, and only include the
QEXPECT_FAIL for CI platforms where the test is known to fail, i.e.
Windows and Ubuntu 10.04.
Task-number: QTBUG-20778
Change-Id: I24af3dab45118758382ba03c8c7a310f16301f8c
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This test has three stable failures on Windows. Mark those failures
with QEXPECT_FAIL and re-enable the test.
Task-number: QTBUG-24294
Change-Id: I9eee2701a228912c3a91fa730e712661fb93add6
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Until March 15, 2012, this test failed consistently on Mac and passed
on other platforms. Since then, the test has passed consistently on all
platforms.
Change-Id: Ie773643a1c9dc0ab3596786badbc3c3afd4824d6
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Compile fix for tst_qtextscriptengine.cpp test on the mac.
Change-Id: I912a339c6c659dc8958cc5997a331e3c18c9cb06
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
I had missed these, apparently.
Task-number: QTBUG-23274
Change-Id: I6455dc34b18ec9cefccfe527b3fd3ad34fb61aa3
Reviewed-by: Lorn Potter <lorn.potter@nokia.com>
Change-Id: I87918276987b3a506c2ac8556940fce89a2d20cd
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
These warnings are expected and correct, so ignore them.
Change-Id: I43931950e46bd3c931db869902574ee7219efa1d
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Adjust the test because we don't read past the end anymore.
Task-number: QTBUG-25108
Change-Id: I8243f1d5ae79d1256aab2cb1132598a716a7eeeb
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
If the "bypass proxy for local addresses" option is enabled in
the windows proxy configuration, then do not use the proxy for
any IP address in the subnet of any network interface.
As the systemProxyForQuery api is now offering HTTP proxy tunnels
for TCP sockets, this change avoids local ad-hoc network
connections being routed through the proxy.
In the case where the local address was on a different interface to
the proxy server, it may have been unreachable through the proxy.
For example IP over USB or Bluetooth.
Change-Id: I0842732832a7795112be029d923ed168edc008d6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I279881693b6eba15a2e145742b3281c9425e9b2e
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Change-Id: I0c5b511229a7ac0c2aa23a9c3d2053077e94936c
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
- Factor out controls from the window flags test, split state
into Qt::WindowState (QWindow) and Qt::WindowStates(Qt::Widget).
- Add to geometry test.
Change-Id: I25b9a8696bfb7f4faef113ac82559ebb90a140c5
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
QObject is no longer exception-safe and there's no one working on
improving this, so let's not block innocent commits because of this
failure.
QObjectPrivate's constructor initialises the
QObjectPrivate::threadData member to null, but the destructor
dereferences it unconditionally (the member is initialised in the
QObject constructor). That means QObjectPrivate is not exception-safe
by any definition and, so, anything depending on QObject is not
exception-safe.
Change-Id: If9d5004630b7ce2fb357e328627794caad67564f
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Workaround QTBUG-24451 by retrying creation of SocketPair if it fails
(waitForConnected and waitForNewConnection are used in the factory
function).
Skip very unstable test cases due to QTBUG-25386
Change-Id: I32129922329b895eb3719d61719c487a4d52c466
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add window state change notification logic. Send
and expose event in addition to window state change
on window restore since the QWidget logic expects
this.
Modify QCocoaWindow::setVisible to sync up window
state that may have been set on the hidden window.
Refactor NSWindow event observing to use one observer
function for all notifications.
Add window state testing to tests/manual/windowflags
Add delay after showFullScreen in tst_qstatusbar to
wait for the Lion fullscreen transition.
Change-Id: I57c523cedd0644d4181b40d72046fad4fdb09a9c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
This test has not failed in the last 400 CI runs.
Task-number: QTBUG-23639
Change-Id: I2a8e105ebcba3654a6aac4fd8207c8fbcd2c4db3
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
This doesn't fix the bug, but confirms that it is CI flakyness.
Task-number: QTBUG-21098
Change-Id: Ic37a7574af88205371f4b2c24113d12b1386835c
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
This test has four stable failures. Mark those with QEXPECT_FAIL and
re-enable the test.
Task-number: QTBUG-25297
Change-Id: Ic5304443c4467c46f70ef033c8f17d7f3732294c
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
The test has one stable failure on CI, but that failure is not observed
by all Ubuntu 11.10 users. Mark that failure with QEXPECT_FAIL when it
is going to fail and re-enable the test, following the pattern
established for the qtcpsocket test on this platform.
Task-number: QTBUG-23380
Change-Id: Ic7546595f314c55ebd36957ada92978141a1c509
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
- Remove Q_WS-ifdefed sections and switch by platform name instead.
- Remove Q_OS_IRIX and Q_WS_QWS conditionals
- Fix deprecated QPixmap::grabWidget(), QPixmap::grabWindow()
calls.
- Use QTest::qWaitForWindowShown() instead of
qt_x11_wait_for_window_manager().
- Rewrite some platform-specific code using QPA interfaces.
Change-Id: I29ce4c4f3e5c05edddfd018dc2eabdd77738eb23
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
ConnectInBackground should be set when opening a network session
due to a background request. This test checks that.
Unfortunately, none of the bearer plugins currently in Qt Base support
this attribute, so the test result is inconclusive.
(testing with a debugger shows the attribute is set correctly, but
it can't be read back as the set is discarded by the plugin
implementation)
Change-Id: Idcf777fe489a62d4ff5007ffd291a84ba052311b
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
Using the policy change signal from QNetworkSession.
If the new policy disallows background requests and this is a
background request, then generate an error.
This results in a TCP RST on the socket, and a
BackgroundRequestNotAllowedError on the QNetworkReply.
If the reply is already finished, no action is taken.
Change-Id: I4ff5c681a8b7b852727bb95f03664d666f4efe07
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
Ftp and Http have different implementations of QNetworkReply,
so test both of them.
Change-Id: If502fa1788110edf89e619966534eea08830a19b
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
Test positioning QWindow and QWidget (frame / normal geometry)
for testing QPA plugins.
The test can be built with Qt 4 for comparison.
Change-Id: I695bf28d5fdf738262d322518d01ad04aa5056f5
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
This test hasn't failed in the last 400 CI builds.
Task-number: QTBUG-4965
Change-Id: I2ff03b7a12906a2b583b3127bf47c12b901ed319
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
This test has not failed during the last 400 CI builds.
Task-number: QTBUG-23641
Change-Id: Ibcb840679e023db41456e41eedcfcc38ecedbaac
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
This test passes consistently on Mac OS, but crashes consistently on
Windows and fails consistently on Ubuntu 10.04 and 11.10.
Disable the test only on platforms where it known to fail, so that CI
can use it to detect future regressions on platforms where the test
currently passes.
Task-number: QTBUG-22560
Change-Id: I0def45e1ed7dd3387e42e7294a495c89bc0caea6
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This test passes consistently on Mac OS and Ubuntu 11.10, but crashes
consistently on Windows and fails consistently on Ubuntu 10.04.
Disable the test only on platforms where it known to fail, so that CI
can use it to detect future regressions on platforms where the test
currently passes.
Task-number: QTBUG-25293
Change-Id: I5d6a474ea1e6fdf3983f164ebc181e1dd6e3f639
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This test has one unstable failure that occurs about 0.8% of the time in
CI. Make the test catch this particular failure and re-enable the rest
of the test.
Task-number: QTBUG-20688
Change-Id: I22f5d372db77ea35163f96195ac0c174d8078899
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This test has one stable failure. Mark that failure with QEXPECT_FAIL
and re-enable the test.
Task-number: QTBUG-22815
Change-Id: I38445b659235076b00d9dd82d2a824d1caa1439b
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
This test has one stable failure. Mark that failure with QEXPECT_FAIL
and re-enable the test.
Task-number: QTBUG-22812
Change-Id: I1e1ad63472db7ba724c9936ae718de0b3b078bbd
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
This test hasn't failed for more than 250 CI runs, before which it was
failing consistently.
Change-Id: I0c2f7d3893731c800bebb0d3d51312d0d0948eb5
Reviewed-by: QTBUG-23057
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
This test has not failed in more than 300 CI runs, before which it was
failing consistently.
Change-Id: Ib9a0e4120b276e5620b544a0836134f1cbac7c84
Reviewed-by: QTBUG-23063
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
The test has two stable failures. Mark these with QEXPECT_FAIL and
re-enable the test.
Task-number: QTBUG-23064
Change-Id: Ibb607ac252a6690d0d37f650a5ae41e5e2a681a2
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
This test has one stable failure on Mac. Mark that failure with
QEXPECT_FAIL so that the rest of the test can be used by CI to catch
regressions.
Also, change the failing QVERIFY to QCOMPARE so that the mismatching
QStringList values will appear in the test output.
Task-number: QTBUG-23062
Change-Id: Icb0cccfe0bd5bc74a6a2c1ddba89c1f55f5e64de
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
This test has not failed in the last 1000 CI runs on Mac. It only fails
when the test machine has some printers configured, which is not
presently true for the CI machines.
The two options are to disable the test on all unix platforms (because
it fails on all unicies when there are printers present) or to enable
the test for all platforms so that CI can catch regressions that don't
depend on having printers connected. I choose the latter option.
If the CI machines are configured with printers before the known bug is
fixed, the failures should be marked with QEXPECT_FAIL rather than
disabling the whole test again.
Task-number: QTBUG-23060
Change-Id: I3cebed4aefdd088ff00215ea9d7413f90bd9e9b1
Reviewed-by: John Layt <jlayt@kde.org>
This test used to be unstable, but has not failed for more than 400 CI
builds.
Task-number: QTBUG-23637
Change-Id: I0d92136aa9d641e447820ab19b53034f475f74da
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
This test hangs ~2.6% of the time in CI.
The previous commit which attempted to mark this test as insignificant
did not work due to this .pro file doing a load(testcase) prior to the
line which set CONFIG += insignificant_test. testcase.prf must be
loaded _after_ insignificant_test is set.
Task-number: QTBUG-25342
Change-Id: I20470337fda8235e2fd0b6e8d5f564c8c57d167e
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
That change also fix moduleForType() which was wrongly recognizing
negative ids as belonging to Core.
New tests were added.
Change-Id: I40a5819effb32489a45937011980457387c9f8be
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
This has been broken since modules do not currently find
their (public) dependencies.
Change-Id: I0c9e7c46f7a6499993c98aa6d33996bdd3a1be5f
Reviewed-by: Clinton Stimpson <clinton@elemtech.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Change-Id: I061130e5b937ad818cc9016ae62d5890092d60f2
Reviewed-by: Clinton Stimpson <clinton@elemtech.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This test has not failed in the last 300 CI runs.
Change-Id: I559ea223856b1460deb343384d5b4439f42a41d7
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
This test has not failed in the last 400 CI builds.
Change-Id: I22b59565a6a6cb48653bd9b0d967abbf074d59a4
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reference tasks with detailed analysis of failures rather than generic
task for blacklisted tests.
Change-Id: Ibd0ed836ffb84fe9aa14488d43085316e666de21
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Follow-up to c55a99965d8c08d5f924d49db4fe4aa49df8096.
3 problems prevented stored procedure output parameters from working.
- SQLBindParameter needs access to buffer provided by QByteArray.
- The length of the buffer is measured in bytes.
- A typo corrupted conversion back to QString.
Also, data() makes more sense than constData() to expose the buffer.
Task-Id: QTBUG-18435
Change-Id: I66444b13c0f584ed79bcf026e5a23caff83c22cb
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
results are now equals to results of ICU's u_isprint() for the entire set
of the Unicode code points
Change-Id: I763f4b37cccd285eb01543d486f25bd7ea011241
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The placeholder name must include the : prefix.
Several type tests for aggregate functions assumed sqlite behavior
which is actually exceptional due to sqlite's loose type system.
REAL is a synonymn for DOUBLE in sqlite but is also compatible with
at least MS SQL Server, PostgreSQL, Oracle, and MySQL.
Change-Id: I97f8c55d2e962b072cfab11a121fda685666e754
Reviewed-by: Harald Fernengel <harald.fernengel@nokia.com>
Archived build logs on http://testresults.qt-project.org/ci/ show that
the QPluginLoader test has failed in CI only once in the last 1000
builds (in build 1786), and on that occasion the test was legitimately
blocking a regression.
The QFactoryLoader test was derived from the QPluginLoader test and has
not failed since its first run on March 29, 2012.
Task-number: QTBUG-22765
Change-Id: I866b4b8e30e393e0c7e7292119c072b27008ab43
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
This test has two stable failures, one of which slipped through while
the test was disabled. Mark the failures with QEXPECT_FAIL and
re-enable the test.
Task-number: QTBUG-24186
Change-Id: Ie24f86603a01634d6eec5a42baa77e966f9388c8
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
This is a regression introduced by commit
22b7d21186.
Task-number: QTBUG-24965
Task-number: QTBUG-25140
Change-Id: I3f3bfe23af802444b078a29ee5565dd2bd24a34d
Reviewed-by: David Faure <faure@kde.org>
Part of this test was skipped on Mac OS X, due to a bug in timer
handling. This bug has been fixed[1] and the test now passes again.
[1] https://codereview.qt-project.org/#change,21953
Task-number: QTBUG-24319
Change-Id: Iad0a315cfdfcfb007e8aa9243cfef4b2f2b33895
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
This test is like qguieventdispatcher, it duplicates a corelib test in
the gui test suite, since the QtGui library often gets a different event
dispatcher implementation from the platform plugin.
Change-Id: Ifd724066950bc3b98a804bc2e5d40ce7b0429af4
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The failure was fixed by commit e430ddfafc
and the test has not failed again in the >500 CI builds that have
occured since that commit was merged,
Task-number: QTBUG-23061
Change-Id: I41063f9dbc6b6d7d6b99f1a0c20708b0842353d5
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
The number of paint events is correct now, but the first expected region
is still incorrect. Move the XFAIL to the region comparison.
Change-Id: I3e706cf703b20a0e98b644b3082172fc3142b44f
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
QTimeLine appears to have very poor timing characteristics. Historical
CI logs show roughly one failure in every twenty-five test runs on
Windows, and less frequent failures on Mac and Linux.
The root of the problem seems to be that QTimeLine's currentTime
counter appears to run at a variable speed and the only guarantee is
that it is slower than wall time. The frameChanged() test
function waited for double the expected duration of the timeline and
still found that the timeline had failed to finish in about one in every
thirty test runs. The interpolation() test function also failed for the
same reason, though less often.
This commit makes the frameChanged test more strict so that the poor
timing will be demonstrated more often, waiting only 1.5 times the
duration instead of double the duration. It also makes the test fail
gracefully so that this known issue won't disrupt CI when the test is
made significant in a later commit.
Task-number: QTBUG-24796
Change-Id: If469d43abb662e24445a9da619052eea9cf7c581
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QTimeLine::currentTime() is an integer in the range [0..duration], not a
float in the range [0.0..1.0]. The aim of the test appears to be to
verify that currentTime() is at least 90% of the way to duration() when
the timeline is almost due to finish, so verify that and give the
corresponding 10% tolerance on reaching the end state.
Change-Id: I38646947c3b9189a4e8e91a450c6071430ddc66a
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This test hangs ~2.6% of the time in CI.
Task-number: QTBUG-25342
Change-Id: I2c3531140e15edfe2dc2524e101b84e3206a4e61
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
Default QDataStream version was changed in Qt5, but the test tried to
load an old dumped file.
Change-Id: I49c06c232ec8a27f33c9da345bae4e03cd0c56fb
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
When destroying a window immediately after showing it, we can sometimes
provoke a crash in Cocoa after the show-window-animation has finished
(which appears to assume that the window's view will always be valid).
Prevent the crash by not removing the view from the window. When
recreating a window, we explicitly release the old window, but we do not
release the view, so we can freely add it to the new window (i.e. this
does not introduce new bugs related to recreating the platform window).
Task-number: QTBUG-24977
Change-Id: I466ce75b04785401032a0a2d4a2c494910cd1672
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Otherwise, the order of updating of the indexes will cause
inconsistent results because it will rely on ordering within a
QHash (which is indeterminate).
Task-number: QTBUG-25325
Change-Id: I7d99578c8ee2954b8562dc5aff7dc32e74d41fb5
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This test has not failed in the last 500 Continuous Integration runs.
Task-number: QTBUG-22769
Change-Id: Ib2e95bb2291757941baa0ea46d568816eef20b09
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
This makes it easier to find insignificant tests that have no associated
bug report.
Change-Id: Ia71d59da062818d3860b0365d063e044705267fd
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
When encountering a null preprocessing directive (which is supposed to
be ignored), the moc preprocessor will leave a PP_NEWLINE token in the
token stream. That will confuse the parser.
The PP_NEWLINE token need to be ignored in the preprocessing phase.
Task-number: QTBUG-22717
Change-Id: I1e502a7e5bc6fa8ce2f82109ba7199b95747ff0a
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Lots of uses of the annotations and error names, plus a bunch of local
unit test names (including one file that had to be renamed).
The meta object generator is updated to support both the old and new
names. That means some references to com.trolltech *must* remain in the
source code.
Task-number: QTBUG-23274
Change-Id: Icc38ae040232f07c437e7546ee744a4703f41726
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Lorn Potter <lorn.potter@nokia.com>
Change the old com.trolltech ones to org.qtproject and introduce Use
the alternate domain name for the Qt Project because the dash
character is not valid in interface and error names.
Task-number: QTBUG-23274
Change-Id: Iac1699e70525d67f983c10560932acff6b2ecde6
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
The testChildrenLayoutsChanged fails randomly. This happens rarely,
f.i. wasn't spotted by CI when QHash randomization itself was merged;
but is indeed reproducible by running the test a few times in a row.
This is now blocking api_merges integration, and I have no idea
how to fix it.
This patch marks the test as insignificant for now (the bug
tracking this test failure is QTBUG-25325), and switches the failing
tests from QVERIFY(a == b) to a proper QCOMPARE (so that the
expected values do show up in the build logs).
Change-Id: I16f0e28bcbb06dbac2e7169f4676a19ccf626a92
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
http://unicode.org/versions/corrigendum6.html:
> in Unicode 5.0, the list of characters with the Bidi_Mirrored property
> was made consistent for brackets and quotation marks, in preparation for
> new constraints on bidi mirroring. However, after publication of
> Unicode 5.0.0 it was discovered that this change adversely affected
> several quotation mark characters in deployed data.
Task-number: QTBUG-25169
Change-Id: Id49caf401af2d5a1e6dbcc32b2f350aa20b7f901
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The test fails consistently on the CI (but never fails on any
of the developer machines). This is possibly a timing issue.
Change-Id: Ie40d9c38c3128a93898b0e50bfde5a754bd2b7fb
Reviewed-by: Giuseppe D'Angelo <dangelog@gmail.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
The key returned by QHash::key is an arbitrary one that maps to the
given value. The test instead relied on it being a specific one.
Change-Id: I090351797e8b52036d78160fd810518a11e8107d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Applied Bill King's suggestion in QTBUG-1363. Columns of
hStmt must be accessed in order.
Verified using ODBC driver on SQL Server 2005 on Windows 7.
Added test for length of text field for MS SQL Server over ODBC.
Task-Id: QTBUG-1363
Change-Id: I6673dafe75e3ef394d41e439adb45096c1421068
Reviewed-by: Bill King <bill.king@nokia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
The hash autotest is wrong: it assumed that the iterator on the hash
would reach the end after iterating on two elements with identical key.
But three elements were added to that hash, and the third one
can appear after the other two.
That code path is left for the map test only.
Change-Id: I51de7987e2b132b6caff7bb4bac6a57fb7fcb530
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
I have run the test 250 times in each of these configs with no
crashes observed, so assuming the instability has been fixed
by another change.
ubuntu 11.10 64 bit
ubuntu 10.04 32 bit
windows 7 msvc2010 64 bit (debug)
windows 7 msvc2010 32 bit (release)
Task-number: QTBUG-20686
Change-Id: I02bab165c263cf79684c7723eae1e278839b1e37
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Just XFAIL the failing test instead of ignoring the whole test.
Task-number: QTBUG-25272
Change-Id: Iedca9913032f13c6610b049a0313c9e4336216e0
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Just implementing the ### Qt5 suggestion about making
controlTypes a virtual function.
Change-Id: Ic1db47fe488f089de965438e456e9b48e0b96f32
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This test has been XPASS'ing since a long time now.
Change-Id: Ibfcd1b5078e0b8efed9ed0740a4238d24ef8ca33
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
That was a regression introduced in 1c5db1aff
Example:
signals: int *someSignal();
would produce this code:
int* _t0 = int*();
which does not compile
So have special handling for pointer to change it to '= 0'
Change-Id: Ie695e15e309d15c3cfd5c5a69ac8bf6d61ae9915
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This test hangs 2-3% of the time.
Task-number: QTBUG-25284
Change-Id: I32e01696262be2de7e015b8f811d1666551426cc
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
