When qmake is run with -prl we don't need to write the glue makefile,
and doing so will end up with MakefileGenerator::writeProjectMakefile
trying to write to an invalid Option::output, resulting in warnings:
QIODevice::write device not open
Change-Id: I196b185570e7329c621c2ccb8530b43f4be51ee6
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
QLocale::uiLanguages() on the system locale uses whatever the system
locale's query(QSystemLocale::UILanguages,...) returns. On Android,
this is just a list of locales. However, for non-system locales, we
also include some results of removing likely sub-tags from the locale
name, where equivalent. Thus zh-CN would also get zh and zh-Hans-CN
added to it; however, if the system locale is zh-Hans-CN, the shorter
forms are omitted. So post-process the system locale list in the same
way, albeit tweaked to avoid duplicates and rearranged so that we can
insert likely-adjusted entries between what they adjust and what
followed it.
Added QLocalePrivate::rawName() in the process, since it looks likely
to be useful in other contexts (and I needed its value): it just joins
such tags as are non-Any. This, however, uses QByteArrayList, so added
that (it's small) to the bootstrap library and qmake.
This follows up on commit 8796e3016f.
[ChangeLog][QtCore][QLocale] The system locale's UI languages list now
includes, as for that of an ordinary locale, the results of adding
likely sub-tags from each locale name, and of removing some, where
this doesn't change which locale is specified. This gives searches for
translation files a better chance of finding a suitable file.
Fixes: QTBUG-75413
Change-Id: Iaafd79aac6a0fdd5f44aed16e445e84a2267c9da
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][qmake] The syntax 'LIBS += -frameworkFoo', or
'LIBS += "-framework Foo"' is no longer supported. Use the
canonical 'LIBS += -framework Foo' instead.
Change-Id: I50fd02dbfa155a0b95859734486a92bd448e87c2
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
People tend to "turn off debug and release builds" by just not building
one of the variants. For example, Qt's own rcc is built in release only,
however it is configured for debug_and_release with the same TARGET for
both.
Let qmake complain about conflicting TARGETs only we're about to build
all of those conflicting targets, i.e. if build_all is set.
Change-Id: I0448bf5cb421e2d801d3cc30e0d80353fba0d999
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Do not resolve -l entries to absolute file paths for libraries in the
default search paths.
This restores behavior from 5.12.0 (commit 2327944d) for Windows
system libraries.
Fixes: QTBUG-78827
Change-Id: Ic2d4626df87308dd635afc1ab5c4b8191d3d2831
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
The root of the framework bundle shouldn't contain random files,
and doing so will prevent the bundle from being signable.
We still look up prl files in the root, to keep backwards
compatibility.
Change-Id: Ifd0bc3c6e7924e89eec54d3ef9368dfc95ed402c
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Remove info about Windows Phone, which is no longer supported.
Task-number: QTBUG-61884
Change-Id: Ic330f0f19a4e7314dd175f6c492fa25133185517
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Commit 80dea664 broke .ui files with global includes that are not part
of the project, because we blindly added every file path that falls
out of 'uic -d' as dependency.
Introduce the extra compiler CONFIG flag dep_existing_only to bring
back the old behavior that ignores non-existent dependencies and set
it for uic.
Change-Id: I6eaa82817c932a98ebac6d08115a9815d4b9dd21
Fixes: QTBUG-78144
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
For nmake and VS projects we added the NDEBUG define for the release
configuration unconditionally within the qmake generators. To undefine
it, users had to use a nasty work-around.
Now, define NDEBUG within the MSVC mkspecs. In order to do that we
introduce the DEFINES_RELEASE and DEFINES_DEBUG variables that are
merged into DEFINES in default_pre.prf.
Users can unset NDEBUG by writing
DEFINES -= NDEBUG
in their .pro file.
Note that DEFINES_RELEASE and DEFINES_DEBUG are merged in
default_pre.prf in order to give extra compilers (like moc) the chance
to see the fully resolved DEFINES variable. This is different from the
QMAKE_CFLAGS_(DEBUG|RELEASE) variables that get merged in default_post.prf.
Fixes: QTBUG-78071
Change-Id: I381770a1d2f974fbae9b09a2254e3f2fc7842b68
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
[ChangeLog][QtCore] Qt installations on the host system can now be
relocated, i.e. moved to other directories.
Add a new feature 'relocatable' that's by default enabled for
non-static builds
- on platforms where libdl is available,
- on macOS when configured with -framework,
- on Windows.
If the feature is enabled, the directory where plugins, translations
and other assets are loaded from is determined by the location of
libQt5Core.so and the lib dir (bin dir on Windows) relative to the
prefix.
For static builds, the feature 'relocatable' is off by default. It can
be turned on manually by passing -feature-relocatable to configure. In
that case, QLibraryInfo::location(QLibraryInfo::TranslationsPaths) and
friends will return paths rooted in the user application's directory.
The installed and relocated qmake determines properties like
QT_INSTALL_PREFIX and QT_HOST_PREFIX from the location of the qmake
executable and the host bin dir relative to the host prefix. This is
now always done, independent of the 'relocatable' feature.
Note that qmake is currently only relocatable within an environment
that has the same layout as the original build machine due to absolute
paths to the original prefix in .prl, .pc and .la files.
This will be addressed in a separate patch.
Task-number: QTBUG-15234
Change-Id: I7319e2856d8fe17f277082d71216442f52580633
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Having hard-coded absolute paths in the xcode project breaks switching
between iOS and simulator builds.
Fixes: QTBUG-77804
Change-Id: Ib655bfc774b92c413a7b94ba4d005b6e1c4d2905
(cherry picked from commit 97465b1540)
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
In xcode projects we replace the _debug part of referenced libraries with the
variable $(QT_LIBRARY_SUFFIX). This only worked for libraries passed with -l.
Make the library suffix replacement work for libraries passed as absolute paths
too.
Fixes: QTBUG-77804
Change-Id: Iac2dbd2f67c3fa0f415ac43cbab5a906657164e5
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This was introduced by accident in 4da47d0f.
Fixes: QTBUG-77429
Change-Id: Ic3d9052e1fc83dab5ed3b8725629588208b0d7bb
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
(cherry picked from commit 2a4cf923f4)
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Having hard-coded absolute paths in the xcode project breaks switching
between iOS and simulator builds.
Fixes: QTBUG-77804
Change-Id: Ib655bfc774b92c413a7b94ba4d005b6e1c4d2905
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The description of the project mode looked like this:
-project Put qmake into project file generation mode
In this mode qmake interprets files as files to
be built,
defaults to *; *; *; *.ts; *.xlf; *.qrc
The list of wildcards is incomplete. Unfortunately the file extensions
are defined in QMAKE_EXT_* variables in mkspecs, and the help display
code has no access to that data. This went unnoticed for quite some
time, and fixing this is too involved considering the gain.
Replace the text above with the static text below:
-project Put qmake into project file generation mode
In this mode qmake interprets [files] as files to
be added to the .pro file. By default, all files with
known source extensions are added.
Change-Id: I815a50957c05dccc45e1cd6657f568599d1911f6
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
The conditions were wrong, they must compare against zero.
Also, use qstricmp to avoid the platform #ifdef.
Change-Id: I7e5ef1b9ae8e2e1d3d9ce90a645ee568b370ab57
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The commands are separated by "if errorlevel 1 goto VCEnd" lines to
make sure we abort on the first failure. However, we also insert magic
comments starting with "Rem" for IncrediBuild. These do not need
error checking. Also, the last command does not need error checking.
The XML line ending entities are also unneeded. By using proper line
endings we ensure that commands appear on separate lines in Visual
Studio's property editor.
Change-Id: Ifbf7525281e892c820034fafc64b555fff3dc756
Reviewed-by: Miguel Costa <miguel.costa@qt.io>
The VS project generator never calls the Win32MakefileGenerator code
that sets up DEST_TARGET which is used for checking for conflicting
DESTDIR/TARGET combinations on Windows. Replicate the setup in
VcprojGenerator::initProject().
This amends commit e75aed1a.
Change-Id: I4238eb2f57615095c372cee9ada9fc961cc36133
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Sub-projects in VS solutions must have unique project names. If there
are multiple projects with the same TARGET then QMAKE_PROJECT_NAME must
be set to different values.
The .sln generation code did not use QMAKE_PROJECT_NAME and produced
.sln files with equally named sub-projects.
Replace the 'orig_target' member of VcsolutionDepend with a
'projectName' member and use it when writing the .sln file and for the
misnamed "GUID map" that's supposed to have unique keys.
This commit amends 9e750d34 (qt/qt.git).
Fixes: QTBUG-77639
Change-Id: I81c64f8bc6baeb6d99e9d5808fb73dfd7aaaeeb8
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Since its introduction in commit
65bb1a25419210e6097cad973fb847aa3719c09b (old internal history, 2005)
with the commit message "optimizations I've been sitting on here"
we're dragging along this dead code. It is time for removal.
Change-Id: Ic7902ebb8c402734974ad6651a1371d1e5bf93c5
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Add QCalendarBackend as a base class for calendar implementations and
QCalendar as a facade via which to access it.
QDate's implicit implementation of the Gregorian calendar becomes
QGregorianCalendar and QDate methods now support choice of calendar.
Convert QLocale's CLDR data for month names to a locale-data component
of each supported calendar and relevant QLocale methods now support
choice of calendar. Adapt Python scripts for locale data generation to
extract month name data from CLDR (keeping on version v35.1) into the
new calendar-locale files. The locale data for the Gregorian calendar
is held in a Roman calendar base, for sharing with other calendars.
Add tests for basic uses of the new API.
[ChangeLog][QtCore][QCalendar] Added QCalendar to support diverse
calendars, supported by implementing QCalendarBackend.
[ChangeLog][QtCore][QDate] Allow choice of calendar in various
operations, with Gregorian remaining the default.
Done-with: Lars Knoll <lars.knoll@qt.io>
Done-with: Edward Welbourne <edward.welbourne@qt.io>
Fixes: QTBUG-17110
Fixes: QTBUG-950
Change-Id: I9d6278f394269a183aee8156e990cec4d5198ab8
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This was introduced by accident in 4da47d0f.
Fixes: QTBUG-77429
Change-Id: Ic3d9052e1fc83dab5ed3b8725629588208b0d7bb
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Windows resource files support a subset of C preprocessor directives.
Among others they can have #include directives.
Use QMake's own scanner to retrieve the files that are included by a
Windows resource file and add them to its dependencies.
For the test case the TestCompiler class had to be extended:
runCommand is now public, and commandOutput is less peculiar.
Fixes: QTBUG-3859
Change-Id: I138703352c37c98297c0574a9a440510c1c494b8
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Having those characters in QMAKE_EXTRA_COMPILERS broke the generated
VS project file. They must be replaced by XML entities.
Fixes: QTBUG-1935
Change-Id: Iff1edbeabec4cedef777071682412970b7769f19
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
QMakeLocalFileName is not suitable for QList. Use QVector instead.
Change-Id: I5a3c4c8da14c0a920b5a57cba148ad68ac0f85a2
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
RC_FILE is not an internal variable that "rarely needs to be
modified". Mention that it's about Windows resources and link to the
corresponding section.
RES_FILE: Add link to RC_FILE and the more general section. Also
rephrase "compiled Windows resource file" to "Windows resource
compiler's output file" which is more precise.
Fixes: QTBUG-8709
Change-Id: I19c61e6a9505d45fc13fefbcd0ba9441191aa42e
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Kavindra Palaraja <kpalaraja@luxoft.com>
If a project has DESTDIR and TARGET set to fixed values, then the
target paths conflict when doing debug_and_release builds.
With this change we're detecting this situation and yield a warning.
Fixes: QTBUG-2736
Change-Id: Ib163db3463322792ab9fa5b997285ac9fc9819ab
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Libtool cannot cope with absolute paths in the dependency_libs entry.
We split absolute paths into -L and -l here.
Change-Id: I30bf11e490d1993d2a4d88c114e07bbae12def6d
Fixes: QTBUG-76625
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
In MakefileGenerator::initOutPaths() we ensure that directory
variables end with a directory separator, except for DLLDESTDIR.
There doesn't seem to be a valid reason for this exception.
Remove it for the sake of simplifying the code base.
Change-Id: I60eb01b410161e6e1d147d76f044f5140a7573bd
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This undocumented option was introduced in
69c22301806b56d56cbe5f5076b889ba98e41a2b (old internal history, 2006) to
prepare some unspecified change to configure that was never done.
Change-Id: I60de731ac9bc6f6424c57574e59e9f6b4f6c5eb3
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
