Change-Id: I68d087b15839418008db5bf1c0c76ca303245519
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The $$path may already be absolute, so prepending a slash may
result in //usr/lib, for example.
Task-number: QTBUG-32570
Change-Id: If7a4f6fbec0216404cfe48c1da62d21d75b3e272
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
... as that causes debug+release installs to overwrite each other's
postprocessed files.
introduces CONFIG+=sliced_bundle, which instructs qmake to create
file-by-file install commands. we don't know whether people are not
putting files outside qmake's knowledge into the bundle build dir, so
this mode is not necessarily backwards-compatible, and thus off by
default.
Task-number: QTBUG-28336
Change-Id: I23e90985ccd3311f0237ed61aadca6d7ed8325b7
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Some packagers don't want to install the private headers.
Check the existence of private headers only if the 'Private' component
is specified when finding the package.
Task-number: QTBUG-32466
Change-Id: I1fdbfb25e8ce485cd051564b937f766b2733741a
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Use "_" instead of "-" in variables so variable replacement works
properly.
Change-Id: I2b17dca8f2351bc0933c165017f3fbb9393b0514
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
For developer builds, there is no need to run the test a second time.
Change-Id: I3564874cb2e9d6cc243e25a89ecd7f89df23b0bd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This gives us better consistency across the Qt ecosystem.
Change-Id: Ie12ebb6e8c826ed2e0445eb37de0b79595da41c2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The test should still be run, even though it is insignificant.
Change-Id: I6a3853e2b0e9670152b4f329dbceed2986a7e008
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
the forward-referenced directories don't exist yet, so we get pointless
warnings. in fact, this is why we do a multi-pass build in the first
place, and consequently using indexes during the first pass is
illogical.
Task-number: QTBUG-32152
Change-Id: I66bf6b43238827e87cb8bf6932d581b808c1032d
Reviewed-by: Martin Smith <martin.smith@digia.com>
the previous attempt broke ActiveQt, as it actually has public modules
without headers (they are provided by a common base module).
so explicitly mark the internal modules as such instead of applying
heuristics.
Change-Id: I8d8a2ee66f02c3444da2036a497e7f382f089f62
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Google moved dx.bat into a new build-tools/VERSION folder
meaning our dx.bat no longer found dx.jar. Fix this by
passing into our dx.bat, the location of the real dx.bat
Removed hardcoded 17.0.0 and %ANDROID_BUILD_TOOLS_REVISION%
path searches.
Change-Id: I91c12c01745d6f12edbd126102b8f06eba291402
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
This reverts commit 1ef74a763a, as
assembler files in SOURCES break compiling with -pch, as we don't create
a respective PCH.
instead, compile assembler code with QMAKE_CC, not QMAKE_CXX.
the reason why this change is needed in the first place is not clear to
me, but i guess that CXX defines some c++-related macros when
preprocessing the file, which breaks further down the line. this is
counter-intuitive, as the g++ frontend should treat the same sources the
same way as the gcc frontend (differences should be limited the the ld
invocation).
Task-number: QTBUG-29765
Change-Id: Ic0116b3a5fa621f12ac41cadf3062ff00b538e85
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
if a private module was used without the suffix, it would not add any
include paths, but the library would be still added. as long as the
includes were written as <Module/private/Header>, this would not become
visible, as the public modules would add the common include path ...
however, this soon won't be the case for mac frameworks any more. this
change makes the problem visible early on.
Change-Id: I8b1a20313ad736cb49507f07fa623e9aa812f651
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The Qt CI system runs the unit tests after installation, but
with the qmake in the build directory. This means that the
installed content is not unit tested. Add an additional cmake
unit test to test the files in the install location.
The new test is marked insignificant for now until the true
effect on the CI system is known.
Task-number: QTBUG-27315
Change-Id: If9f12e88cfc741946cfabc25dbf789a11a2af4b8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
We haven't fully agreed on whether headers should be in $includedir or
not for builds with frameworks, since frameworks carry their headers
inside. However, this change came too late for Qt 5.1 for us to assess
the potential impacts -- it's known to break at least the cmake files we
ship.
So restore the build to the way it was.
This is a partial revert of 6d61dfdbb7.
Partial because the old behavior was partially broken: it did not
install headers for release builds. Now we always install (and in
debug-and-release mode, we might do it twice).
Task-number: QTBUG-32134
Change-Id: Ib84879c5a148d3717d16a7a90b2f5735fb5d80be
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
only the include statements found in public headers are constrained to
work with this flag. our own c++ files and private headers can use other
styles, which this flag breaks.
Change-Id: Icb1ced17dc438083731049788ac28349c87ba7ef
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
they are a somewhat different kind of private headers, but follow
generally the same logic.
Change-Id: Ic6f42ed7061dde2ffd0e32b1d713354b58a20970
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
the entry for the normal headers already ensures that there is the
correct version symlink. having an entry for the private headers as well
is pointless, and in fact clobbered the symlink for the actual library.
Change-Id: I2403761bf006b7bfa490ce85c7b0e46d5ef203c0
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
the only case where we want to skip copying the bundled data (which is an
optimization only) is the debug sub-build when we are actually building
both debug and release.
Change-Id: I1f3f67ccd9a64033b133ffaf58639cd9f7107c27
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
i see no particular reason why debug builds should still get
"normal" headers.
Change-Id: I3625648549e8c234a365bab26823190ed2219cdf
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
there is no point in adding a structure we don't actually define.
Change-Id: Ica43123f17eca6ebd4b5b7ec2526ebabef31c82a
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
it's cleaner, and it makes it possible to actually have a single else
branch.
Change-Id: I5ef917b678e2bd5a2face8ee19e942e5e952aa80
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
don't mess with the -F linker flag manually. qt headers include other
headers via the canonical Module/Header syntax, which means that the
compiler also needs the -F flag. QMAKE_FRAMEWORKPATH does exactly that.
Task-number: QTBUG-29003
Change-Id: I5f4af1a462697cd6996c54436ccdb9fc2b216020
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
... except for MAKEFILE_GENERATOR = XCODE. This means the spec no longer
hard-codes g++, and will work regardless of whether the default spec was
clang or g++.
This require us to set QMAKE_XCODE_GCC_VERSION properly for GCC, so that
additional compilation flags passed by Xcode will match the actual
compiler used.
Task-number: QTBUG-31713
Change-Id: If65140a7471cd16f483036742f1d5b86d0485c52
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Otherwise doing stuff like -spec macx-g++ when the default spec is clang
will not have an effect on the tools used.
Change-Id: Ia2769abfdd8c19f79d427b9f09707430e736305a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
If Qt was built with C++11, it links to libc++, and we need all projects
that use Qt to link against the same library.
Technically, we could do QMAKE_LFLAGS += -stdlib=libc++, but that hasn't
been tested enough without also enabling C++11, so we keep the
relationship between the two for now.
Change-Id: Ic628bcbade60cc82f93707f372c2119c24d9dc8a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Liang Qi <liang.qi@digia.com>
The cmake variable for the mkspec dir must specify the source
location if used in the build dir, and must specify the install
location if used in the install dir.
Change-Id: I2fee8cd0c7198e9fc5cbb63972e20c75636672d1
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
the evaluator has the bug that function arguments are inherited.
work around that by passing an explicitly empty 3rd parameter to
qtAddTargetEnv().
proper fix upcoming in less critical branch.
Change-Id: Ic45cc890abaa6271985590d4ebe02c96bff6dec4
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
qtAddModule() always returns true anyway.
the real checking is done by qtAddModules() and qtAddLibrary() itself.
Change-Id: Ieed821acc36dc57ca52aec3e6b2dd6513be9b6c1
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
unlike the .command, the .depend_command is not executed by make via its
chosen shell, but qmake itself via the system's native shell.
consequently, it needs different path separators and no make-escaping.
Task-number: QTBUG-31289
Change-Id: I480f815753632db6e8d4725f463f8a1fc59680a6
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
nmake needs %-escaping in addition to $-escaping, not instead.
this has little practical impact, so it went unnoticed.
Change-Id: I144b6142eec0151d83a22e0ac5ead7b0415cdafa
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the vs ide executes the commands verbatim, so they must not be
make-escaped.
Task-number: QTBUG-31289
Change-Id: Ie73fd5c4da5527c2d10bc94ccdf60f8a1ca21351
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the precise syntax depends on what exactly the command is used for, so
we need to resolve it at the last moment. see followup commits.
This logically reverts commits 6f4ff81380
and 731e6bece5.
Change-Id: If285c91d7521069be86d32593b5c2ae2027b3038
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Change-Id: I840f963c3648d123b31f79aa2c8902c0ad74e982
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
instead, use the files directly from the source dir.
Change-Id: I03b728c66de6e03cade6dc153dcc78cea8e3f606
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
We can combine the hybrid and non-hybrid use-cases into a single static
library if we are careful about which symbols are included in which
object files. By limiting the main() and qt_user_main() functions to
their own translation units, the linker will only pick them up if they
are missing at link time (the user's program do not provide them).
This technique is resilient to the -ObjC linker flag, which includes all
object files that implement an ObjectiveC class or category, but will
fail if the -all_load flag is passed to the linker, as we'll then have
duplicate symbols for either main() or qt_user_main(). The latter should
not happen unless the user provides the flag manually, and in the case
he or she does, there's ways to work around it by providing less global
flags such as -ObjC or -force_load.
Change-Id: Ie2f8e10a7265d007bf45cb1dd83f19cff0693551
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Instead of force-loading the whole static library of the platform plugin
we tell the linker to look for the missing symbol qt_registerPlatformPlugin.
This symbol is provided by the same object file as the plugin's static
initializer, so the object file is included in the final binary and
the static initializer is run, resulting in the plugin registering with
Qt.
We could have marked the actual static initializer wrapper provided by
Q_IMPORT_PLUGIN(QIOSIntegrationPlugin) as undefined, but due to the C++
mangling this would look less intuitive on the linker command line than
the custom dummy function that we provide, which has C linkage.
Change-Id: I6805537e1f49260a41d48c555376964cb1fe75d8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
the commands are already quoted appropriately for the shell.
Change-Id: I746bb5fba2cd6548c5dc7ef81087c69a200ecbb8
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
in the actual specs, we also set 'gcc' for clang.
Change-Id: Ifc6b27d56596f34c944205795d665f545d090f80
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
These directories are not currently part of the Qt installation for mac
frameworks.
Task-number: QTBUG-31641
Change-Id: Ifef372cc2ebb692f9ae5a7b1f8dba5f683d1e7eb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This is actually a list in CMake, not a value to be prepended
to paths. Specify the QT_SYSROOT instead to root the location
of include directories. CMake will soon get a CMAKE_SYSROOT
variable which will replace this.
Change-Id: I239f69f127f3676a3835aa4f29638f44ef209819
Reviewed-by: Volker Krause <volker.krause@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
nonrelocatable adds the full uri to the exported type information
which is the correct thing to do for the qt plugins (and 99% of
the cases).
This way import bla.x 1.0 works correctly in the code model.
Change-Id: Ia06873dd8b2ea4627e3297a98e8df87275ceaf73
Reviewed-by: Alan Alpert <aalpert@blackberry.com>
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
make the include dir in the source tree the "main" include path, as
that's where the majority of the headers is. then selectively add the
shadowed dirs.
Change-Id: I03ad13cfcf77175c141b94d41b1221740d851faf
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
rename MODULE_PROFILE_DIR to MODULE_BASE_INDIR.
force MODULE_BASE_OUTDIR to be always the shadow of the above.
rename MODULE_BASE_DIR to MODULE_SYNCQT_DIR (the former is still
recognized for backwards compat with webkit).
the idea behind these changes is making the variable names and override
possibilities reflect their actual use.
Change-Id: Ica4062d7231a0ce13241670e0d0f43e6b1b97160
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The generated cmake files expect only the names of libraries, so the
existence of directories causes erroneous fatal errors when attempting
to use Qt5Gui, if pkg-config returns a -L entry from
pkg-config --libs egl
Change-Id: Iec50b4be68ab643c3c02abce2435a98e69955138
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Iikka Eklund <iikka.eklund@digia.com>
all private headers are created by syncqt (and are thus in the source
dir), so we can simply override the normal (build dir based) paths
instead of extending them.
Change-Id: I9c1f3344c401b481b3f3d2295515f1aabffaa9a0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
these builds usually assume all headers in the qtbase build (== source
== install) dir, so the path for adding our pre-generated per-module
include paths needs to be triggered explicitly.
Change-Id: I57ec441d58cdf8186907ee6c36dce08daa206c49
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the logic in the configures was even trying to express that, only that
nowadays we always ship syncqt, so the tests were kinda pointless.
this frees us from the perl dependency for non-developer builds of
packaged modules (except for webkit, which needs almost every scripting
language on earth anyway).
obviously, this requires that the packaging scripts run syncqt in the
source dir before tarring up the sources. note that for repositories
other than qtbase, the -version argument needs to be passed to syncqt.
Task-number: QTBUG-29465
Change-Id: Ic929ab17a5de4b30fbf48b3aa9bfa3b4d2ef37d6
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
now that we split out the part that depends on the project file, we can
do it cleanly here.
this way we can generate these headers at pre-build time already.
and for git builds, perl is probably faster than qmake at this task.
Change-Id: I343255c6de22329471a3ae2c2aac9ebeb160a501
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
this will allow us the create the dependency list in a different way
than the rest of the master header.
Change-Id: Ib083fbbf6194cd9a161d669f860aaf32fd96d9d4
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
it would only cause trouble further down the line.
Change-Id: Ied9ba8a1ecf36b77e1091c73564bd7601ea6a6b4
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
there is no particular reason for it being done by qmake.
avoids that the logic is distributed over two source files,
and allows us to generate these headers at pre-build time already,
including not forwarding to a yet unexisting file (which would have a
yet unknown location).
Change-Id: I9c78ab425cf6f01d076c86fd1ee602626f231487
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Since the dx tool has moved in the SDK, we need to update our copy
of it to also search in the new location for dx.jar.
Task-number: QTBUG-31405
Change-Id: If093a9f51f33c5d8666919f516a3b336322a7169
Reviewed-by: Ray Donnelly <mingw.android@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Due to the way the DEX_CMD is formatted on Windows this would break
every time. Since we actually bundle dx.bat in the repository, there's
no need to check for its existence, so the easy fix is just to move
the existence check into the code path where it's run from the SDK.
Task-number: QTBUG-31405
Change-Id: If1aeb744d3abbd2488153b13aac401436965074e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Ray Donnelly <mingw.android@gmail.com>
this overrides the magic that makes examples only install their sources
in production builds.
packagers may want to force the build of the examples, so they can
package them up for demo purposes.
this is actually why we formerly had the split between demos and
examples ...
Task-number: QTBUG-30788
Change-Id: I5633f69404c5aa6846f5496e8f161a273a7a7da3
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Lisandro Damián Nicanor Pérez Meyer <perezmeyer@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Enables us to detect if a library should be added as a dependency or not.
E.g., libQt5MultimediaQuick_p should only be added as a dependency if an
application is using both QtMultimedia _and_ QtQuick.
Task-number: QTBUG-30861
Change-Id: Id62642c40e2ecca7149d249f65c7b0c950898374
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
In the recent revisions of the Android SDK bundle, the dx
tool has moved from platform-tools/ and into
build-tools/<revision-number> where revision-number is 17.0.0 at
the moment. To enable building on these SDKs, we add
detection for the dx tool and an environment variable which
can be set to override the revision number to provide a way
to build it against future revisions as well.
Task-number: QTBUG-31199
Change-Id: I0d6a22163dc2e50f7a81cd3fe8f3d53c6335aaee
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Change-Id: If7c724daa85df5e29e410b8deb4e69beb43ee8ea
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Change-Id: I1d745adfbae371f8f1f76e954be98f4c2fd962e0
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
it was only meant to automatically support syncqt.bat, which is gone
now.
fwiw, invoking batch files from within msys Makefiles was broken to
start with, as sh cannot directly run them.
Change-Id: I435568c578ce79e46f4e230e985ca9a04b34ffff
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
we never call it with an explicit extension, so this only complicates
matters.
Change-Id: Ib15180130359bb9575bf5dda564f8b817431618f
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
this makes it possible to directly execute perl scripts on windows.
Change-Id: Ibbb90d46518ea8ac4f695d07141700630b33fab3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
... and introduce -hostlibdir configure option for symmetry.
the libraries built for the host have no business in the target prefix.
in principle this code would even support dynamically linked host
libraries, but that's currently unused.
Task-number: QTBUG-30591
Change-Id: I8e600fa4911a020fb0e87fbf7ef2f35647c7c4d5
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Ivan Romanov <drizt@land.ru>
The Xcode and SDK settings are expensive to resolve, as we're using
system() calls to resolve them. We now try to detect the presence of
a .qmake.cache file (and inform the user that creating one would be
a good idea), and use the file to cache the various settings after
resolving them.
The Xcode logic had to be moved form xcode.conf as part of the mkspec,
into default_pre/post.prf, so that we could cache() the resolved values.
Task-number: QTBUG-30586
Change-Id: Ib5368cfee6f7e4a4a33f6be70d0e20d96896fe56
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Change-Id: Ida382a80dba882bbeb920756adc0c16321efe37e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
For bundling Qt, we need two things:
1. We need to build a regular .jar file out of the Java files,
so that they can be built into the app package. Dexing the
classes first (i.e. compiling the JVM bytecode to Dalvik
bytecode) is required for loading the .jar file at run-time,
but cannot be used for building it into the app, so we need
two different paths.
2. We need to specify which extra files have to be bundled for
each module (this is primarily for plugins and imports). This
is because there is no static dependency on these files, so
it cannot be detected during deployment.
Task-number: QTBUG-30751
Change-Id: I733603ee5d1c64bd7c5b9357eb5d993b9d0298f7
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
this way we can use it for "regular" apps (gui tools) as well.
Change-Id: I3b00d0bde215dff1c2726b35626c4c0c256d92c2
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
there is at least one examples-only repo (qtwebkit-examples).
we look for tools/ only when src/ is also present, based on the
assumption that if there was only tools/, it would be actually named
src/ (like in qttools). the split between the two is nowadays arbitrary
anyway.
Change-Id: I982b1d0e26dd7d0a5de751546099a58f86390124
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the idea is that "tools" actually means "graphical applications". that
means that all bootstrapped/build tools are consistently built,
regardless of their location in the source tree.
non-bootstrapped non-graphical tools are a bit of a grey area. it's
going to be decided on a case-by-case basis.
Change-Id: I28b959b7e659d8aa86cf6769ab6d2689c855ec6b
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Change-Id: I664c31d256d395d4afec81de66a84dc79ed10b9d
Reviewed-by: Volker Krause <volker.krause@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
There may be multiple libraries specified in the mkspec, such as
EGL and Mali, as used in devices/linux-sh4-stmicro-ST7108-g++, so
create an imported target for each one. Also populate the
Qt5Gui_EGL_LIBS variable with all created imported targets. Similar
variables are created for the used OPENGL implementation.
In the case of using the packaged ANGLE library, we already know the
exact locations of the binaries.
This makes it possible for third parties to use the same GL
implementation as used by the Qt build itself. As these are used only
privately by QtGui, they are also added to the DEPENDENT_LIBRARIES
of that target so that they are found for rpath-link usage.
On some platforms (eg Raspberry Pi), multiple include directories must
be set to include egl.h, as the headers it includes for vcos are a
bit scattered.
Task-number: QTBUG-29132
Change-Id: I1126da3d37cd51c88d3670347c8b6405b285efb5
Reviewed-by: Volker Krause <volker.krause@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
the warnings should have been acted upon before 5.0.
Change-Id: I20a4673d7ec80e0252aa39289c6718fe80799de7
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
If building angle ourselves, that's just the basic Qt include dir,
and if using an external gl, look for it in the places specified
in the mkspec.
As the qopengl.h header includes the gl header, this is a 'public
include dependency' of QtGui, so it is added to the relevant
variable and the INTERFACE_INCLUDE_DIRECTORIES of Qt5::Gui.
Change-Id: I8c2c1782e0a2600032771175444b087da28433fc
Reviewed-by: Volker Krause <volker.krause@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
In qtbase commit 7ac58d1ff0 (Make cmake
packages installed to /usr non-relocatable., 2013-02-11), we made
cmake config files non-relocatable if they were installed to
the /usr prefix. That was assumed to mean that this was a distro
or platform package, and was a workaround for the usr-move problem
on Fedora and ArchLinux.
However, cmake bug http://public.kitware.com/Bug/view.php?id=14041
showed that forcing absolute paths in this situation is not desirable
in cross compiling scenarios. CMake commit 6c613b433c45efb0bb013a6bd668cbb8ac740259
(Handle usr-move without forcing absolute paths (#14041), 2013-04-03)
addressed the problem in CMake, and this commit is an equivalent.
Change-Id: I065a6230bc618aa980fae6ca511ae10df4cd62c2
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
We now use an absolute path, to prevent picking up the wrong plutil binary.
In addition we pipe the possible stderr output of plutil and xpath to the
null device, so that the final QMAKE_MAC_PLATFORM_NAME will be empty in
case of any errors, and caught by the isEmpty() check below.
Change-Id: I8ad24bf63162a76410c2ae223dd2fc48e7886bbf
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This way, the default generator is used when cross compiling
for mingw.
Change-Id: Ie536f1bca35ea38aec1232cdd95fc063c4f23e70
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Peter Kümmel <syntheticpp@gmx.net>
On iOS the compiler expects archs like armv6, armv7, armv7s when passed the
-arch flag, or when the ARCHS Xcode variable is set. Instead of mangling
QT_ARCH, which is used other places and assumed to match the values
provided by the arch.test, we use our own variable.
Change-Id: I05e10be8d69dd4d7cbcef04640fef99f1efb253d
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
For now there's only one architecture per host/target, but
this will change once we start detecting the CPU features
for both device and simulator on iOS.
For convenience we set QT_CPU_FEATURES to the resolved
value of the current architecture, so that simd.prf still
can use QT_CPU_FEATURES directly.
Change-Id: I28e8b339a5c30a630e276165254dba09a3da6940
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Instead we pass the -force-load as a single argument to the linker,
which is not mangled/touched by either the Xcode or Makefile generators.
Change-Id: I72e17638f0a4a8308a352d4b2033c1b5a9b65b84
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
The property only needs to contain the direct include dirs of
a target. For example, Qt5::Gui does not need to contain the
include/QtCore directory because it already has Qt5::Core in
its LINK_INTERFACE_LIBRARIES.
Change-Id: I69612f42c29e6056b3d15399498d041d43a0dd6b
Reviewed-by: Brad King <brad.king@kitware.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
It should also have an effect for Visual Studio project files, not
just makefile generators.
Change-Id: I395071f09b29a6e8967a3d44e41d30480ae783f7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
We always use the xcodebuild/xcrun/xcode-select binaries in /usr/bin,
as these will dispatch to the right binary based on what Xcode version
has been chosen using xcode-select -switch. This fixes an issue where
a tool was in the path from another Xcode installation. We can rely on
the tools as they are present on a clean Mac OS install.
Change-Id: I1d3cc1e92604f9be6d6f14639cb6322234edd696
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
xcrun will spit out errors to stderr and nothing to stdout if it fails
to find the tool in question. By checking for an empty return value and
skipping the sysrooting we guard against mangling the tool variable.
Change-Id: I68f59a6c8116696dd75cceed7b33ac666f3468b2
Reviewed-by: Eike Ziller <eike.ziller@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
These are the same for normal builds, but differ when cross-compiling Qt.
Change-Id: I75eccc6f4b67b440a08c4aba41aabb7df686c9f9
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This means we have to bump the deployment target to Lion (10.7), as the
LLVM 'libc++' C++ standard library does not support Snow Leopard (10.6).
For iOS the deployment target has to be bumped from 4.3 to 5.0, but we
don't enable C++11 by default yet as it's not tested enough on iOS.
Users who wish to deploy to 10.6 need to build their own Qt,
passing -no-c++11 to configure.
Change-Id: I7b5d20ab002db889d1091a4b7ff600f62caa7f06
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Change-Id: I1d8061302fbb8494b5ae31e20a644745fe969f10
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Brad King <brad.king@kitware.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
These variables are set by the ConfigVersion.cmake file already,
so no need to maintain them manually in the Config file too.
Change-Id: I73d949fb22052f4f6acbc1f70518e73f8fbf7c9c
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Fedora uses configure options to set the install prefix to a location
which does not contain the cmake config files. Rather than finding
dependencies from the installation prefix, find them in sibling directories
instead.
Change-Id: I06974e9655d0dda2a18064d0f9a33997cf2cb2d3
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Need to look in <android-sdk>/platform-tools/lib for dx.jar
Change-Id: I104cf157ce1795e907cca31b37c62163248b8d77
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
It's written to qmodule.pri by configure with a hard-coded path,
and hence need fixing up or appending, depending on which
exclusive builds are used.
Change-Id: I069c04438dc303868a76349c9bdd385adc074c0a
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Extra-compilers such as objective_c.prf may reference QMAKE_CXX, so we
need to sysroot it before it's used.
Change-Id: I1e367b3d0816096300a441786619f298134de0a6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
There is a bug in dx.bat in the Google Android SDK tool where
relative paths do not work correctly. We need to use our own
version of this tool until:
https://android-review.googlesource.com/#/c/52680/
..is merged.
Change-Id: I451a3239590919d014a673f3e8e17244e96676ab
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
this is a qt specific option and really should not be hard-coded.
also, the implementation used undocumented api that is internal to the
bootstrapped process, which made it impossible to de-bootstrap it.
Change-Id: If706960671744e64a9a7c366437977a800a6058e
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
... like qt_tool does. otherwise we get linker errors with debug builds
on windows.
Change-Id: I583f277ff3fb75c9fe5f305a6f1b5d066b840c07
Reviewed-by: Debao Zhang <hello@debao.me>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Jonathan Liu <net147@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Used by features in CMake 2.8.11.
This matches the features in FindQt4 in that version of CMake,
namely that the IMPORTED targets contain the appropriate
INTERFACE_INCLUDE_DIRECTORIES and INTERFACE_COMPILE_DEFINITIONS
and that the qtmain.lib static library is automatically linked to
on Windows by executables. Additionally, the
INTERFACE_POSITION_INDEPENDENT_CODE property is set appropriately
if Qt requires users to use position independent code.
Change-Id: Ide341f43fcaf7d722a7bdf1a12b1071c7e548ccc
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This will likely fix some odd cmake related tests in the CI.
This reverts commit 316d8ececa.
Conflicts:
mkspecs/features/data/cmake/Qt5BasicConfig.cmake.in
src/corelib/Qt5CoreConfigExtras.cmake.in
Change-Id: Ib7714746f96bf12061d92242a42296d200c56c00
Reviewed-by: David Faure (KDE) <faure@kde.org>
The version number parsing needs to handle the reported version string.
Change-Id: Ifd34b2c86b21a1c5e4c91a43447468ca6feab8cf
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Replaced tabs with spaces to align with space-indented code
and removed some trailing whitespace.
Change-Id: I4930afc3df206ef8ee96de3e69f0d69fc4a1c77c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This way find_package(Qt5Svg 5.1.0) will require Qt5Core 5.1.0 or later, for
example.
Additionally, forward the EXACT keyword to find_package dependencies
so that find_package(Qt5Svg 5.1.0 EXACT) will reject Qt5Core 5.2.0, for
example.
Change-Id: I302f5a3a683e6c36ef42f1e81c5f7e6258cf5624
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
otherwise we assume that the user is trying to build a random example
which just happens to live inside a qt module's repository.
Task-number: QTBUG-29756
Change-Id: I17f217b4235fbe04f2c49d1d92ce08b86bb259b9
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
this is cleaner than having it parse qmake project files.
the only remaining built-in version extraction is the fallback to
qglobal.h needed for bootstrapping.
as a "side effect", this fixes the build of modules with mismatched
versions centralized in .qmake.conf, as this was simply not handled so
far.
the -mkspecsdir syncqt option goes away, as there is no use case for it
any more.
Task-number: QTBUG-29838
Change-Id: I6912a38f0e93a26bc267a9e3d738506fd3ad431b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jocelyn Turcotte <jocelyn.turcotte@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Instead of first finding it and then testing that we can find it.
Change-Id: I1a1090693520b1d6adadef93839f25d277947e76
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Task-number: QTBUG-28540
Change-Id: I916d104c8aba551ee9a5b34da3fd85dcb26bbf64
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
project files of bootstrapped modules can, just like those of
bootstrapped tools, benefit from automatic adjustment of QT (and
CONFIG).
Change-Id: I83815e69a2b105caaee0c2e2602828f8eb425eef
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
this affects only webkit when doing module-by-module installation, so it
went unnoticed.
Change-Id: Iab87f4a76fcb0fa9a1b1d6bcab9a73756e416120
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
QT_CONFIG is supposed to contain configure output, not a list of
modules. for example, enumerating modules is not cleanly possible if
modules are mixed with other flags.
the conflation was merely historical, due to webkit and phonon doing
it this way in the preliminary qt4 modularization.
we now have a much cleaner way to query modules (qtHaveModule(<module>),
or less recently, !isEmpty(QT.<module>.name)), which is already used
throughout Qt.
the old way was supposed to be removed for 5.0 already, but it slipped.
better do it now, before people actually start using it.
Change-Id: Iabdf0cdfaab9cd674f634f4c6ece105b2039c850
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
modules which demand it (i.e., qtwebkit) need forwarding pris, etc.,
even when not making a -prefix build.
Change-Id: Id405be8763e94cc074854f799bd785e9cdf62e8e
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Andras Becsi <andras.becsi@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
unlike the real compiler, moc does not have these directories built in,
so it would not find headers from a system install of qt.
Task-number: QTBUG-28870
Change-Id: I86f18cdc8953145190163746dae59f4e784f2d78
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Change-Id: I16e05b72e57473239b89498313ba7745ffa6a346
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
bootstrapping is only necessary if we are cross-compiling or have a
circular build dependency.
Change-Id: I17244457652ca9d4fc797043e57070c2ae3ee5d1
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The 'silent' option to CONFIG will mangle QMAKE_CXX and friends by prepending
an @echo, which sdk.prf doesn't handle (it assumes the variables contain
names of executables, with optional arguments). Instead of teaching sdk.prf
generic command line parsing we ensure that silent.prf does its job at the
very end, when the tools have already had their paths fixed by sdk.prf.
Change-Id: I7093232e5cc37ed8106a3b838f42ad8f1a43fb86
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
For Mac OS X we currently specify build tools without an absolute path,
which means we end up using the ones in /usr/bin. This is wrong, we
should be using the tools from the toolchain of the chosen SDK.
For iOS we do specify an absolute path, by resolving the toolchain
path in the iOS makespecs.
To solve the situation on Mac OS X, we move the logic of resolving the
toolchain path to sdk.prf, and share it between OSX and iOS.
For configure we need to duplicate some of the logic from sdk.prf, as
configure pulls out QMAKE_CC and QMAKE_CXX for running some initial
tests and building qmake. The new macSDKify function also solves
the issue of missing sysroot and deployment version in the flags.
Change-Id: Ib1d239c9904cf3ccee5214b313cf6205869a1462
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
We now take advantage of the fact that xcodebuild -version allows you to
pass the key that you're interested in, to only print that single value.
This technique is used by Apple's own build scripts as well.
Change-Id: I57b8424590d4137a0e7f263a318e17ee2e0dfad4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
so far the assumption was that every qml plugin/module in qt is a
wrapper/extension of a corresponding qt module. this not the case for
the upcoming quickcontrols, for example.
Task-number: QTBUG-28200
Change-Id: If4b8bb6633e76b2a510908d09a010cee12d33634
Reviewed-by: Liang Qi <liang.qi@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
otherwise they would inherit it from qtbase, which may effectively
result in a lie if building against a different release.
for convenience we define the version centrally per repo.
qtbase is special, in that we use the version defined in qglobal.h to
avoid defining it redundantly (the instance in qglobal.h is currently
needed to bootstrap qmake; the configures would need some work to change
this).
Task-number: QTBUG-29838
Change-Id: Ie9a5b0ff0d64b69ff2d34af2f7c42d6278e957cc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The former applies both on Mac OS X and iOS, but 'macx' is specific to
Mac OS X.
ios.conf and macx.conf now share most of their settings in the common
mac.conf. We set the default QMAKE_MAC_SDK before loading mac.conf, so
that any overrides in the device config will apply afterwards. This
means configure's mkspec parsing will be able to read the QMAKE_MAC_SDK.
Change-Id: I0c7e26a6a0103e19b23ef152aa9e4ab461cee632
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Based on the Necessitas project by Bogdan Vatra.
Contributors to the Qt5 project:
BogDan Vatra <bogdan@kde.org>
Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
hjk <hjk121@nokiamail.com>
Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Paul Olav Tvete <paul.tvete@digia.com>
Robin Burchell <robin+qt@viroteck.net>
Samuel Rødal <samuel.rodal@digia.com>
Yoann Lopes <yoann.lopes@digia.com>
The full history of the Qt5 port can be found in refs/old-heads/android,
SHA-1 249ca9ca2c7d876b91b31df9434dde47f9065d0d
Change-Id: Iff1a7b2dbb707c986f2639e65e39ed8f22430120
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Instead of hard-coding the SDK and deployment target.
A host build will already use the host-makespec, so now that we
always build against an SDK, these mkspecs will have the SDK and
deployment target set.
Change-Id: I2b0343ae75f7de12081bab8346307b96b3883f62
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is enabled only for -developer-builds and only for certain
compiler-version combinations that are in a whitelist.
It also requires each library, plugin or tool to declare whether it is
supposedly clean of warnings. When most targets are clean, we can
consider inverting.
Change-Id: I17b5c4e45aee5078f9788e846a45d619c144095a
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
We don't want to hit the network, as a flakey network or slow server will
hang the XML parsing. We assume the XML is well formed.
Change-Id: Idc4898a925a46222954bf633a04ea9fe148c6797
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This file is now included by three types of Qt output: modules,
plugins (including QML plugins) and tools.
Change-Id: I5085f6ff37f70e9228303bf0520040adc2e2d7a5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
configure.prf checks if MAKEFILE_GENERATOR is set
to something it can work with. ios/default_pre.prf
unsets MAKEFILE_GENERATOR.
This breaks QtMultimedia at least. Add special case
for iOS to configure.prf and set QMAKE_MAKE to "make".
Change-Id: Ie8feaeefe4a932d735a0cd4c09e869ca1341aae5
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
In case they provide their own main that calls UIApplicationMain.
Change-Id: Ia050277ae5cbcbf01bc57b87ec37a74db9568059
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Ideally we'd only have to do QTPLUGIN += ios, but this doesn't work as
we need to link with the force_load linker option. Even trying to build
on QTPLUGIN and then replace the -l line with what we need will fail, as
the prl logic in qmake which runs after all the prf files does not know
about the force_load option and will then fail to resolve dependencies
from the prl file.
Since we load the platform plugin using -force_load, there's no need to
generate a cpp file that does the plugin import.
The main wrapper is not a real Qt plugin, and doesn't have an import
function that we can call, so we link it manually instead of relying
on QTPLUGIN.
Change-Id: I0381a3c9ed7f8d41a4121e1fc0b7c0e210a8b832
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
As long as Qt Creator does not provide any iOS integration, and the
app bundle we create using the Makefile generator is not good enough
to deploy to a device anyways, producing Xcode projects make the most
sense.
We base the decicion on whether or not the project depends
on QtGui and has app_bundles enabled. This prevents configure
tests and other tools from having Xcode projects, but allows
examples and demos to build out of the box.
Instead of setting the generator unconditionally we unset it in
default_pre so that we can detect if the user set it manually. This
means the user won't be able to inspect the MAKEFILE_GENERATOR variable
from the pro file, but this is less of a use-case then overriding the
generator from the command line or prooject file.
Change-Id: I881cf3e29631445f83ea4ff0979f7a566e4810f5
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
And use configure's -sdk argument to choose between the iphoneos and the
iphonesimulator SDK. xcodebuild -showsdks can be used to list the
available SDKs. Passing an SDK without a version postfix implies
the latest version of the SDK.
Change-Id: I881df754d522fc91aaa16ba3e39cf0c37a21a1f1
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Currently the Qt5_MODULE_TEST_DEPENDS variable is maintained individually
in each repo. This patch makes that obsolete.
Change-Id: I1a72bb4da70b9ace6f79296d6a3fb295eaa999ff
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
These will be used by ctest_testcase.prf.
Change-Id: I8a0e6e1eb110daba41b007c8309f3cb9a2059ecb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Introduce QT_OPENGL_ES_2_ANGLE_STATIC define for static builds
and modify export accordingly. Provided static instances
of gl::Current and egl::Current for Qt's single threaded
use.
Task-number: QTBUG-28196
Change-Id: Ia75699d6da103fb8dd9d5fe97c1ee51e48a74406
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
Allows us to dynamically generate the command line option for iOS later,
and allows the user to override QMAKE_MACOSX_DEPLOYMENT_TARGET with the
expected effect on the command line options.
We unset PERL5LIB to ensure we get the system Perl libraries, since the
Mac OS 10.6 CI machine seems to have a broken XML::Parser::Expat from
macports/CPAN.
Change-Id: I04430c7b1daf9452d72f9a04a6b7f8d0d6926884
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This way, the Release library is chosen if Qt is configured to
build both debug and release, and if the consumer configuration
is not an exact match for 'Debug'.
This means that RelWithDebInfo and MinSizeRel, which are 'standard'
configurations in CMake with mulit-configuration generators, will use
the Release version of Qt. All other configurations will also use the
Release version, unless MAP_IMPORTED_CONFIG_<CONFIG> is used as
described in:
http://doc-snapshot.qt-project.org/5.0/qtdoc/cmake-manual.html
and in the cmake documentation:
http://www.cmake.org/cmake/help/v2.8.10/cmake.html#prop_tgt:MAP_IMPORTED_CONFIG_CONFIG
Task-number: QTBUG-29186
Change-Id: Ifc11a9e19fcb304297c204e34a3b25c510329767
Reviewed-by: Brad King <brad.king@kitware.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This ensures that invoking the macro from a different module (operating
on a different target) is not possible.
Change-Id: Idbcd41d03172a8f1dcea26954464ab981fce8879
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
