Flesh out copy-and-pasted code into a function and adjust the coding
style on the go.
Change-Id: I9b8a87d6dd5c33cc1ed9f613fe85daca52309369
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
QElapsedTimer does the job better and without the DST kludges.
Change-Id: Ic4a566f695648cbe069a21ea8d3e84562b665a3c
Reviewed-by: André Hartmann <aha_1980@gmx.de>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
To make their replacements easier to find.
They're in the documentation, but weren't in the source.
Change-Id: Iea936062feaead636e3dd8e93f0b4c82ed8876cb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use QDateTime::currentMSecsSinceEpoch() instead of a QTime with funky
wrapping at midnight and potential DST glitches.
Change-Id: I2455db5778635fc00b4ffdef6edee6d6793e50eb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Re-ran util/locale_database/cldr2qtimezone.py to add new zones to the
table.
Change-Id: I70258a9abbe9815494291deff528f3c18703de40
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
These were in qbytearray.cpp, which doesn't use them, is big and I
intend to move it to a different directory than the header,
qtools_p.h, that declares them. So move them to a small file that does
use them.
Change-Id: I5a4684f8c7628e617546019cc3f01d92d829f085
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Assigning past the end used to be supported, but isn't a good way to
do the job. Exposed by a qtxmlpatterns test that exercised this code,
which gets a warning thanks to Giuseppe's recent changes to QCharRef.
Task-number: QTBUG-76070
Change-Id: Ic254c7ffce60e3b2aafce76ab03ea5db8c68fafc
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
[ChangeLog][QtGui] Added support for filtering Vulkan debug messages in
QVulkanInstance. This is especially useful for processing or suppressing
messages from the validation layers.
Change-Id: Idf0d7889085948daf5b1a53d2a9b11081e967609
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
We'll be adding calendar code here as well, and tools/ was getting
rather crowded, so it looks like time to move out a reasonably
coherent sub-bundle of it all.
Change-Id: I7e8030f38c31aa307f519dd918a43fc44baa6aa1
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
It's perhaps best to ensure that functions we are deprecating shall no
longer be used in tests. Also, fix the "0 as nullptr" warnings.
Change-Id: I2f22c9b9482e80fa120bcd728ec269198a36678f
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
MD4C now makes it possible to detect indented and fenced code blocks:
https://github.com/mity/md4c/issues/81
Fenced code blocks have the advantages of being easier to write by hand,
and having an "info string" following the opening fence, which is commonly
used to declare the language.
Also, the HTML parser now recognizes tags of the form
<pre class="language-foo">
which is one convention for declaring the programming language
(as opposed to human language, for which the lang attribute would be used):
https://stackoverflow.com/questions/5134242/semantics-standards-and-using-the-lang-attribute-for-source-code-in-markup
So it's possible to read HTML and write markdown without losing this information.
It's also possible to read markdown with any type of code block:
fenced with ``` or ~~~, or indented, and rewrite it the same way.
Change-Id: I33c2bf7d7b66c8f3ba5bdd41ab32572f09349c47
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
MakefileGenerator::initOutPaths should only do that: init out paths.
It's not supposed to modify the content of input variables for extra
compilers. Those get "fixed" in MakefileGenerator::init below the "do
the path fixifying" comment.
The first "fixifying" would turn an absolute path in SOURCES (input
variable for the moc_source extra compiler) into a path relative to
the output directory. The second "fixifying" would mess everything up.
Fixes: QTBUG-76097
Change-Id: I8c50ef33d097dba4a1db76144c70b0677beffb6c
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Upstream's cmake build system installs libzstd_static for static builds,
so look for that as well. Now we can also recommend installing it via
vcpkg.
Change-Id: I0ba4c45ecd90bf7b1c9f1e5f84a440caa976a23c
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Let's recommend vcpkg only on Windows for now. That's best maintained
and works best there.
Change-Id: Ied06b6a3cb26d9e56d3f525c1d5a410223754fba
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
We constantly had to adjust the qmake grammar to handle line
continuations (\\\n) in weird places. Instead of doing that,
just do a preprocess step to remove all the LCs like we do with
comments, and simplify the grammar not to take into account the
LCs.
From some manual testing it doesn't look like we get any regressions.
Change-Id: I2017d59396004cf67b6cb54977583db65c65e7d3
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
setName() and setDebug() need to be called on a parser element before
the parser element is used as a sub-element in another parser element,
otherwise the debug output is not shown.
Hence the "iterate over all locals" approach works only partially.
Instead add a new decorating function add_element() for the
construction of each parser element, and make sure to enable debugging
inside that function.
Unfortunately there is no clean way to avoid duplicating the parser
element name both in the local variable and in the function argument.
Change-Id: Iaa9ed9b7dbb22ec084070b9c049cf51c841d442c
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Some qtdeclarative pro files caused exceptions when trying to parse
them using the script. This included the following:
- handling conditions divided by newlines and backslashes
- handling conditions that have no scope
The parser has been fixed to deal with those cases and relevant
tests were added.
After the change, all qtdeclarative project files are parseable by
the script.
Change-Id: Ib9736423f7fb3bcc1944b26cfb3114306b4db9a7
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Override the default debug actions to be decorated with proper
indentation for easier reading.
The setup only has to be done once, and not on each QMakeParser
creation.
Change-Id: If5f965b462c782c654ee8ebfdd33570e8f94b084
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Before this patch we enabled AUTOMOC, AUTORCC, AUTOUIC for all targets
that did not opt out.
Aside from being wasteful from a performance point of view,
this also caused issues when trying to build qtimageformats which
does not depend on Widgets which is the package that exposes uic.
To avoid this, enable only AUTOMOC for all targets by default, and
UIC and RCC can be opted in via the ENABLE_AUTOGEN_TOOLS option.
To facilitate this some refactoring had to be done, like moving some
common setup for all autogen tools into a separate call, and making
sure that extend_target understands the autogen options, because some
ui files are only added conditionally.
Also the conversion script has been adapted to output the
ENABLE_AUTOGEN_TOOLS option whenever a .pro file contains at least
one FORMS += foo assignment.
Note that we don't really use AUTORCC while building Qt, so nothing
opts into that at the moment.
Task-number: QTBUG-75875
Change-Id: I889c4980e9fb1b74ba361abed4044737f8842ea4
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
These arguments are specific to the build and changes to them are _not_
affecting configuration.
Change-Id: I8c46a0dbea8978f13e78c5cb8f41987f4fde09c8
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Liang Qi <liang.qi@qt.io>
The variable was not reset when interating through all the Qt targets,
which resulted in QtTest wronlgy depending on QtWidgetTools.
Task-number: QTBUG-75875
Change-Id: I24da495fa53e9163992a1ed53f5cd7e1c6da5e51
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Signing package may take more then 10s while calling echo really
should take less then 60s ;-)
Change-Id: I1798981492d1467bb8b20099ea705b08ea9b0914
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
The number of CPUs is set implicitly by MAKEFLAGS and NIJAFLAGS.
Change-Id: Ie9296f9a7872253c696536d7b3d6235c7881d42b
Reviewed-by: Liang Qi <liang.qi@qt.io>
Debug/release install targets can potentially install the same files which
leads to errors on install when running make with -j > 1.
If build_all is set, make the 'install' dependent of the new target
'debug-release-install' which contains the commands of 'debug-install' and
'release-install'.
Of course, debug/release is not hard-coded, but the content of the BUILDS
variable is used.
Change-Id: I67b504a95b83daf43bc89dcc0e3391b67e19c027
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
At the moment, Coin builds tests as a separate qmake invocation
against an installed Qt. We need to support the same with CMake.
Change the tests subdirectory to be a standalone CMake project when
CMake does not detect an existing QtTest target while processing the
subdirectory. If the target exists, it means we are building the whole
repo, if the target does not exist, we need to call find_package
to find the installed Qt.
Refactor and move around a few things to make standalone tests build
successfully:
- add a new macro to set up paths to find QtSetup
- add a new macro to find all macOS frameworks
- add a new macro to set up building tests
- add a new macro that actually builds the tests
- export the INSTALL_CMAKE_NAMESPACE value into the BuildInternals
Config file
- export the CMAKE_BUILD_TYPE value, because a test project doesn't
have a .git subdir and thus defaults to be built in Release
mode, even though qtbase might have been built in Debug, so to
avoid the mixing, the propagate the build type
- stop overriding INSTALL_CMAKE_NAMESPACE and
QT_CMAKE_EXPORT_NAMESPACE inside QtSetup if they are set, because
the tests project doesn't specify a major version, and if we
override the values, the moc / uic targets don't get the correct
major version prefix and configuration fails
Change-Id: Ibdb03687302567fe325a15f6d1cb922c76240675
Fixes: QTBUG-75090
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Some Linux distros might not have a double-conversion library. Because
it is such an essential library for QtCore, compile and use the
the copy of the library bundled with Qt.
Also change library name to be a proper target with double colons,
so that in case the library is not found for some reason, the CMake
configure step would fail, instead of failing at link time.
Task-number: QTBUG-74133
Change-Id: I9f3b4298ae6e952891a7a89541d46878176bf1ce
Fixes: QTBUG-75891
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The qmake code to read output from dependency-generation was adding
QByteArray values to a QString, thereby tacitly converting from UTF-8;
this is misguided. Hopefully, the command emits its output in the same
local 8-bit encoding that QString knows to convert from.
Simplified needlessly verbose loops (that violated Qt coding style) in
the process.
Fixes: QTBUG-75904
Change-Id: I27cf81ffcb63ebc999b8e4fc57abdb9a68c4d2b3
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
The state of the module is done, not deprecated, so we shouldn't
recommend users to move away from it in all cases. There's also
no direct replacement for the DOM API.
Fixes: QTBUG-70629
Change-Id: Ifaff9757234bd68a411a3da1403c57bbbcb94693
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
TSAN does not understand the futex system call.
Now, in QMutex and QSemaphore usage, futex is always wrapped by
atomic operations that always do an acquire (before waiting) and
a release (before waking waiters). That alone realizes a
synchronizes-with, and since Qt uses std::atomics, TSAN knows
what's going on and does not complain.
But what if one uses futex directly, or we change the
algorithms, or introduce some other new synchronization
primitive somewhere? Luckily TSAN offers annotations for this
that we can use.
This patch annotates the main entry point for the futex syscall
with a pair of acquire/release semantics. A futex call
guarantees total ordering on the operations on the futex
word(s), whether the call succeeds or fails.
Change-Id: Ib80ff898c09fbb6fc73989247eb757bf70971a8a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This came about trying to remove the Java-style iterator. It was used to
iterate in reverse order, something QMap can't do, easily, due to lack
of rbegin()/rend(). Instead of writing ugly loops, use a vector of pairs,
fill it, sort it, then iterate over that one in reverse.
Change-Id: I09c8a2732a0699fff4c497778745523e20d348a1
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
The noexcept part should be clear. The constexpr should make the
compiler not create initialization code for static instances. This is
how std::mutex works[1], and Clang and GCC understand it. MSVC
doesn't.
[1] https://en.cppreference.com/w/cpp/thread/mutex/mutex
Change-Id: If9e4c6c0279f0024a659d5602d55e126224ca950
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Fixing this in Qt 5 would be BIC. Although it could be okayish, there
are many more classes that shouldn't be copyable. I need to go through
clazy's output and fix them, and would rather do this noise for Qt 6 and
leave Qt 5 alone and purely BIC free.
Added a move-ctor and move-assign, as well as swap(), deprecated
copy-ctor and copy-assign.
The new copy special member functions warn at runtime if they are called.
In order to not pollute client code with the warning strings, lock them
away by defining the functions out-of-line.
[ChangeLog][QtCore][QBasicTimer] QBasicTimer is now a move-only class.
Copying is now deprecated and will be removed in Qt 6.
[ChangeLog][QtCore][QBasicTimer] Added swap() member and free function.
Change-Id: Ic3e6a26f3989d4c8d125c06e8b0b825411c6e106
Done-with: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Silence a warnings flood about qVariantFromValue(), QString::null
and QWeakPointer::data().
Change-Id: I73347190c0fa396b39b9efd00447cf24e48259a0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
It seems like an optimization on the itemsDirty flag
caused a bug to be re-introduced. When a popup is shown
on a new screen, the itemsDirty must however be set to
ensure that new correct sizes are calculated.
Task-number: QTBUG-59794
Change-Id: Ifb5c233b1f9d4d38bd0cd7a9a71cc32ad3212f8c
Reviewed-by: Morten Kristensen <msk@nullpointer.dk>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
this also optimizes network post method handling
Task-number: QTBUG-75660
Change-Id: Ibb0d01f2cc2b2bc7802598c4f6f04b04882c12ca
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Handle a few more libraries that are used in qtimageformats repi.
Change-Id: Ia3b9a845bc6cb8ce98a477b9355011bbadc32c1a
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Add a prefix for generated .qrc files so for in-source builds we don't
end up overwriting htem.
Change-Id: I8eef582479eb45d67585f6aab87b288393bbadb5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Implement some aspects of qt_parts.prf to simplify the top-level
CMakeLists.txt for repositories that follow the common qt structure
(src, tools, tests, examples).
Change-Id: Ia35f4e9207e92c1cf0406353561b0cc52dcb0e59
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When runing the scenegraph example sgengine, gets rid if this error:
QSGContext::initialize: stencil buffer support missing, expect
rendering errors
Change-Id: I7f3a82409bc2cf81cf8217876e527f9c45be3bf4
Fixes: QTBUG-74694
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
