Correct the implementation of cutText and copyText in QAccessibleTextEdit so
they use cut() and copy() methods of QTextEdit
Cherry picked from Qt 4 - 36202cf8fca822492615d418bd563a40bee4af08
Change-Id: I86a531ed7059b1a928cb8515c2743d4d8b596b36
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
Change-Id: If844785d7d3645c33e0fcb1206cc52f8ab644070
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Previously, ignored messages were only cleared at the end of each test
function, i.e. after all data rows were finished. This meant that if a
data row in a data-driven test function didn't cause all of the expected
messages to be generated, the remaining messages would be carried over
to the next data row. This would result in errors about missing
messages being associated with the last data row rather than with the
correct data row.
This commit makes testlib check for missing ignored messages after
running each data row rather than only doing so after the last data
row.
This commit also adds a regression test to demonstrate that ignored
messages can no longer be carried over from one data row to another.
Change-Id: Ibee51aa6e96866fbcbcb4acee1a8340a86a6a4ba
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Previously, expected failures were only cleared at the end of each test
function, i.e. after all data rows were finished. This meant that if a
data-driven test function called QEXPECT_FAIL and then didn't perform
any further verification steps to trigger the expected failure, the
expected failure would be carried over to the next data row, probably
causing the first verification step in the test function to XPASS (with
a seemingly irrelevant error message) for the next data row.
This commit adds the new function QTestResult::finishedCurrentTestData()
to cleanup after each data row is executed. This function treats calls
to QEXPECT_FAIL without subsequent verification steps as a test failure.
This commit also adds a regression test to demonstrate that expected
failures can no longer be carried over from one data row to another. If
run against the previous version of testlib, the new test would report a
pass instead of an error.
Change-Id: Ida5c7f080815b0dca9531131fed582b0918334cb
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QWidget::isActiveWindow() was being checked in QAccessibleWidget::state
to determine if a widget is focusable. As a result, focusable widgets
were reported to be not focusable when the window was not active.
Change-Id: I73c47181ed132a84f0251cb67d0e20912e29a1a6
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
Timers are not entirely precise; if we ask for a timeout of
10000 milliseconds, we might time out in 9999 instead.
Also, we know the expected elapsed time in each case, so do a fuzzy
comparison against that time.
Previously the test was verifying that the elapsed time was greater than
or equal to the timeout in the case where a timeout was expected, which
means the test would not detect bugs which incorrectly caused the
timeout to occur later than it should.
(cherry picked from qt4 commit 9a2573dc13b3e8df6cd15bef64370ea407480fc7)
Change-Id: I91d0c81f989ab43a3c48f6abbb4c5b28e2b35402
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
This autotest assumed that various network operations could always be
completed within 5 seconds. Notably, it assumed that an attempt to
resolve a nonexistent hostname would always result in an error within
5 seconds. In my testing, it usually takes 4-6 seconds to complete,
but occasionally takes as much as 13 seconds.
(cherry picked from qt4 commit c85faef67b6a7e8fcedb4ce800282d41f5b79ec1)
Change-Id: I982ecf6ebc1bb8ee2184cf5592cb2684474c870b
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Qt 5 seems like a welcome opportunity to stop emitting this
spurious beforeDelete signal.
Change-Id: Ib8628343ca9b8fdd85c154a206c7e2bf2c4c9dc1
Reviewed-by: Yunqiao Yin <charles.yin@nokia.com>
The open test case tests opening a device path on windows.
As this requires privilege elevation, the test fails when running
nmake check from a console.
As the CI machines appear to run tests with admin privileges, first
check opening the device using the windows API. If that succeeds, then
opening using QFile should succeed. If that fails, the opening using
QFile should fail.
(Since Windows vista, members of the "administrators" group do not run
at elevated privilege all the time. The user needs to opt in via a
UAC prompt or "run as administrator". This is similar to using the
sudo command on unix)
Ran the test as administrator and normally. Now passes in both cases.
Change-Id: Ibd7682eceb61e35d4912fa0392df536f4331f6ed
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Simplified the raster engine by treating image formats in a more
generic way and removed some unused code.
Change-Id: Ib3979a1a6e3e6f17c5002248545779ec36fff7c9
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
QMetaType used to register a typeName and factory functions for
creation/destruction of objects. While it would be possible for a single
type name to be registered matching different actual types and memory
layouts, there was little that could be done about it.
Now that QMetaType is tracking type information with a direct impact on
data layout and ABI (size and type flags) it is important that we check
and detect binary incompatibilities as early as possible.
[Such incompatibilities could arise from type name re-use (technically,
ODR violations) or, more commonly, as version mismatch between different
shared libraries or plugins.]
Only type size and flags are checked as function pointers to inline and
template or otherwise non-exported functions could trivially differ
across translation units and shared libraries.
When registering typedef types, a check is made to ensure the same name
doesn't get registered as different types.
Change-Id: I8211c3de75d4854ce8fafdb620d3a931c206e0c3
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
The function hasn't been working properly. It was not well tested, for
example it is undefined how QVariant should behave if it contains an
instance of an unregistered type.
Concept of unregistering types was inspired by plug-in system, but in
most supported platforms we do not unload plug-ins.
Idea of type unregistering may block optimizations in meta object
system, because it would be not possible to cache a type id.
QMetaType::type() could return different ids for the same name.
Currently QMetaType::unregisterType() is not used in Qt.
Change-Id: I878b6e8d91de99f9bcefeab73af2e2ba0bd0cba0
Reviewed-by: Prasanth Ullattil <prasanth.ullattil@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
There is no point in keeping separate values which should mean the
same.
QVariant::UserType was used also to construct a valid, null QVariant,
containing an instance of unknown custom type. The concept was strange
and useless as there was no operation that could be done on such
QVariant. Therefore it was dropped.
Please note that the patch slightly changes behavior of different
functions accepting a type id as parameter. Before QVariant::UserType
was an invalid type from QMetaType perspective (id 127 was not assigned
to any built-in type), but QMetaType::User points to the first registered
custom type.
Change-Id: I5c7d541a9affdcdacf53a4eda2272bdafaa87b71
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Andrew Stanley-Jones <andrew.stanley-jones@nokia.com>
Reviewed-by: Aaron Kennedy <aaron.kennedy@nokia.com>
The QNetworkReply finished signal does not have a bool parameter.
Change-Id: I87bd0410545f7a2fc2ab63cca90548f0585bf7a0
Reviewed-by: Shane Kearns <ext-shane.2.kearns@nokia.com>
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
QTest::ignoreMessage() cannot be called when creating test data rows,
but rather must be called when executing a row.
Change-Id: Ic958c4e5c15dd53a48479099b6b07803af6cb789
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QTest::ignoreMessage() cannot be called when creating test data rows,
but rather must be called when executing a row.
Change-Id: Ifceaff4c5a7f1b6408ec57196298e3f3038910c9
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
As discussed on list and approved by Lars and Thiago.
Make QSystemLocale private to give us time and space to change it to a
better implementation.
Change-Id: Ifd806972f3996c43a876f544f78c6557ad71cd75
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Ensure consistent conversions by not using the system default locale.
Change-Id: I60db9fc4f465c0254f3213419e57d7879aaddd65
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QByteArray is declared as movable but it was not tested before.
Change-Id: I4fb636f8705c3fd792a768872206203ee5fd4ddb
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Convert QDate to only use Gregorian calendar and not Julian calendar
before 1582. In future the Julian can be used via proper calendar
classes.
Change-Id: I547a3550332057a0ab1be616706630b6afaceffc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Store the QDate Julian Day number as an qint64 instead of uint32 to
enable support for dates before 2 January 4713 BCE. This changes the
possible date range to be approx 2.5 Quadrillion BC to 2.5 Quadrillion
AD. A qint32 was not used as it only covers 5 million BCE to 5 million
CE which does include Geological or Astronomical time.
The effective supported date range is currently 4800 BCE to 1.4 million
CE due to restrictions in existing conversion formulas. The effective
range will be extended later with new formulas.
Change-Id: Ib4345369455b31d4edae8c933b7721e76414e914
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
qmetaobjectbuilder should generate meta-objects of the same version
as moc; in the future, when the moc version is bumped, QMOB has to
be adapted at the same time.
QMOB was generating version 4 meta-objects. This patch makes it
generate version 6 (the current version). This also fixes a bug with
using qt_static_metacall with QMOB (setStaticMetacallFunction()); it
was already using the version 6 qt_static_metacall signature, which
isn't compatible with version 4.
Also add tests that ensure that the QMOB-generated meta-object works
with real objects; in particular we want to test the codepaths in Qt
that check for version >= 4.
Change-Id: I64a151ea5c947a6f8b7a00e85a39866446c735e9
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
The 'real' datatype should be seen as a QVariant::Double type and not as
a QVariant::String type otherwise it does not get presented correctly
when using a non Qt application to access it.
Test is included for QSqlQuery.
Task-number: QTBUG-16373
Change-Id: Ie323ce49eb95e4d6bb4c3814ba9a957a63f4b259
Reviewed-by: Yunqiao Yin <charles.yin@nokia.com>
(cherry picked from commit b23631015c23a49e3b4d296ea0a6266bfce3d4f1)
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
This has only been around as compatibility interface for Qt4
but is now replaced by QPlatformInputContext.
Change-Id: I677dbbea46311bf39f6c5ca9dc3fb5009abe924a
Reviewed-by: Joona Petrell <joona.t.petrell@nokia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
- Use source file location as working directory for externaltests
Change-Id: Ic05259f48eece920b348ccbde9ba80c90dedfdd2
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This file was removed in commit ba9302b8a9.
Commit 8fad23f326 removed openssl.pri from
src/network/ssl/ssl.pri, but not from the qsslsocket autotest.
Change-Id: Ic1a576ee7f0ee3d68471121ba636b94ce7bae455
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In order to keep binary compatibility, Qt 4 introduced V{2,3,4}
classes for QStyleOption subclasses. They're simple, low level
containers for various members with public access (no accessors
required).
In Qt 5.0 we can break BC, so this patch moves the members
from the derived classes into the ``base'' ones.
The ``base'' ones get a version bump matching the highest
version available, and the V{2,3,4} classes become typedefs.
This change can cause problems in code that used QStyleOption
directly, especially QStyleOptionViewItem, because the old V4
fields get default initialization but the QStyle subclasses
detect that the option is a V4 option and expect all fields
to be properly initialized. The fix in such places is to
properly initialize all fields.
Task-number: QTBUG-23522
Change-Id: I2f782da09ca5cc8c4cbafc07448fb0d33153a251
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QLatin1String now has a constructor that takes explicit length, which
makes it possible to create a QLatin1String that isn't null-terminated.
Made QString::operator=(QLatin1String) work in that case.
Change-Id: Ie77eabd2f8f036531d67cd8051a7b6305b386ccf
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QLatin1String now has a constructor that takes explicit length, which
makes it possible to create a QLatin1String that isn't null-terminated.
Made the QTextStream and QDebug << operators work in that case.
Change-Id: I94d051ce2ebfb2d2a403b96d25e040c80a54bf7c
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QLatin1String now has a constructor that takes explicit length, which
makes it possible to create a QLatin1String that isn't null-terminated.
Made the QString(QLatin1String) constructor work in that case.
Change-Id: I4f4f07a956144b7ea4aa9c58a61c755fb99ef1b3
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QLatin1String now has a constructor that takes explicit length, which
makes it possible to create a QLatin1String that isn't null-terminated.
Made the QLatin1String comparison operators work in that case.
Change-Id: I234ba851e67a6f5cfbb46fb6f0b22623ce40be28
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QInputMethod better describes what the class is about, input methods
in general, be they panels or just composing input from key events.
Compatability headers added for old name. Not bulletproof but should be
enough to get transition done.
Change-Id: Iefde6e7ccb1ec4a3b226cef3469089e751c60fc1
Reviewed-by: Joona Petrell <joona.t.petrell@nokia.com>
`make check' is intended primarily for running functional tests.
For the most part, it does not make sense to run benchmarks in the same
test environment as the functional tests.
Change-Id: I79f867fdab295bdbd4c4b3c785dfd7ede520022e
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- Needed to add toLower() for compare as c:\ and C:\ was causing
a failure.
Change-Id: Idd55774d118b7249e88362688166b4f9d9712c7c
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
- Changed to set working directory based on subprogram
stdinprocess's directory location.
- Changed QProcess execution of subprograms to use
relative paths.
Change-Id: Idbccca635f0f61adba9721bcceeceb0a8a961dcf
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Rename some of the test functions to improve consistency, and change the
order so that all the xfail tests are together (some new xpass tests
will be added later).
Change-Id: Ice1ac5bf61bc26109bb0d08f72eb74e1a0424101
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The test simply generates each possible pair of Pass, Fail and Skip
results. At present the test simply serves to demonstrate the current
shortcomings of testlib's plain text logging, namely:
* If a test function passes for all data rows, that is counted as one
pass, but each skipped or failed row counts as one skip or fail.
* Only skipped and failed rows are reported individually in the test
output. Passed rows are not reported, so it is impossible to see how
many rows were executed.
* A skip followed by a pass will be reported as an overall pass for the
test function, but the same rows in reverse order will not report any
overall result for the test function.
Future commits will attempt to correct these problems.
Task-number: QTBUG-22124
Change-Id: If8c7ea15fc43ba9a1bccd0e881c1efc18e705b25
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- Changed qtextbrowser unittest to use TESTDATA and QFINDTESTDATA
Change-Id: I0ac7c990640d492d5ec94f5824c022a2b5075103
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- Changed qlabel unittest to use TESTDATA and QFINDTESTDATA
Change-Id: Ide6755cd79caf91b553fb6b1412da6fbab583720
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This provides a stronger mechanism e.g when inheriting QItemDelegate.
It makes some things much easier e.g avoid delete of an editor
and maybe only delete depending on what the editor says itself.
This introduces a new virtual function.
Task-number: QTBUG-2299
Change-Id: I8410f8199775987dbacffd99e4c354fdadcdd21f
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This is a test that verifies correct behaviour of qheaderview.
It includes test of swapSections, moveSection, rowcount-change,
resizeSection, hideSection and position lookup.
Change-Id: Idc1fe8167f2d95dee5c5b1161cb633cbf9495d17
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
- Always use <qt_windows.h> as the last file to be included.
- Remove it from some headers, use Qt::HANDLE instead of HANDLE.
- Clean up #ifdef, use Q_OS_WIN for Windows/Windows CE.
- Add NOMINMAX to qt_windows.h to avoid problems with the
min/max macros.
- Remove <windows.h> from qplatformdefs.h (VS2005)
Change-Id: Ic44e2cb3eafce38e1ad645c3bf85745439398e50
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
This is a small QHeaderView benchmark.
It measures visualIndexAt, hideSection, showSecion, moveSection,
insert, remove and trunc rows.
Change-Id: Ibca6a2e130f4ab27d68f51e5e341a78579abd1bf
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
