When trying to build qt3d examples with qmake and MinGW in the CI,
compilation would fail with errors like
In file included from
C:/MINGW1120/mingw64/x86_64-w64-mingw32/include/windows.h:72,
from C:\Users\qt\work\qt\qt3d\examples\qt3d\simple-cpp\main.cpp:63
include/winuser.h:2965:72: error: 'POINTER_INPUT_TYPE' was not
declared in this scope
What happens is that calling qmake on examples.pro loads
qt3d/.qmake.conf, which then loads qt_build_config.prf which then
defines the following definitions:
mingw: DEFINES += WINVER=0x0601 _WIN32_WINNT=0x0601
This limits usage of Windows API up to Windows 7, with later APIs
being unavailable.
Most .qmake.conf files were removed in qt repos, but We didn't remove
the .qmake.conf file (fb656c036d) for
qt3d because it's supposed to be buildable with CMake + Qt 6 as
well as qmake + Qt 5.
Bump the defines to the same Windows 10 version we use everywhere else
when building with CMake.
Amends 6652bf2353
Relates to d57a7c4171
Relates to fb656c036d
Pick-to: 6.2 6.3
Task-number: COIN-762
Task-number: QTBUG-92271
Change-Id: I833dfb6b0832d90a76d05ea14cd3807cb0d67ca9
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Emscripten now warns against passing e.g. “ALLOW_MEMORY_GROWTH”
as a compile option.
Add EMCC_THREAD_CFLAGS, which gets compiler flags only.
Pick-to: 6.3
Change-Id: Ifcf40c45ca75cfdfc98a12e6b9d47f34158b3407
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
Use “-pthreads” instead of “-s USE_PTHREADS=1”. This
is both a compile and linker option.
Pick-to: 6.3
Change-Id: Iaf7cb4ec41577fe596c3e81fda05c03fe0074c08
Reviewed-by: David Skoland <david.skoland@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Lorn Potter <lorn.potter@gmail.com>
If Xcode wasn't configured with any simulators the build would fail
since we had no device to build for. But we don't need to build for
a specific device, we can build for the generic simulator device,
just like we do for the non-simulator build. This likely didn't
work properly at the time it was first implemented, but now seems
to work fine, and is less fragile than the current solution.
Running tests still enumerates the available simulators,
as that needs a concrete device to run on.
Fixes: COIN-777
Pick-to: 6.2 6.3 5.15
Change-Id: I50e31c1b350cf83ce348275b467051263dea88a9
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
-g4 was deprecated in Emscripten 2.0.17, and since we are well past
that version we can safely use -gsource-map instead.
Change-Id: I497155619d6320661f6be0e220b52fa7d6ca0b8e
Reviewed-by: David Skoland <david.skoland@qt.io>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
[ChangeLog][wasm] Recommended emscripten version is now 3.0.0
Change-Id: I9ae082509415d8f00b8e9970b730ad4a472da310
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
When building a shared library (with qmake) in a user project
targeting Android, the library gets a QT_ARCH suffix added to its
name.
This suffix is not added when building a static library
(CONFIG += staticlib).
In the context of a multi-abi android qmake build, all the arch
specific static libraries would have the same name and would
override each other.
This happens with Qt 5.15 and it would also happen in Qt 6,
but we don't support multi-abi qmake builds in Qt 6 so far.
When the original fix to include the arch suffix for shared libraries
was done in Qt 5, d463a63bb9
it was likely an oversight that it was not applied to static
libraries as well.
The !static part of the condition was added in
72d4f0750b .
The change only handled installation responsibilities, not naming of
libraries.
Fix static libraries to include the arch suffix, but only in Qt 6.
It's too late to fix it in Qt 5, there might be projects that rely on
there not being a suffix in static library names. Adding the suffix
would suddenly cause linking errors.
Amends d463a63bb9
[ChangeLog][Android][qmake] Static libraries targeting Android will
now include an arch suffix when built using qmake.
Fixes: QTBUG-83165
Change-Id: I6f68dcb74cec30b4c8f0bc5a819d89843e9d695e
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Doc build is using the same variable to define the reponse file
as moc build, which can lead to case where moc is using the qdoc's
response file instead of its own. Moc needs more include paths than
qdoc, this can then lead to weird compilation issues as moc doesn't
warn about missing includes.
Task-number: QTBUG-98569
Pick-to: 6.2 5.15
Change-Id: Id35da18f664e2032bae96d11b00dbfe55ce37f66
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Large address aware is enabled by default in 64-bit
compilers, but not 32-bit compilers. But Qt users
may build 32-bit Qt themself, in this case large
address aware is disabled in fact, and it may cause
some issues. So we pass /LARGEADDRESSAWARE to the
linker unconditionally to make sure large address
aware is enabled for both 32-bit and 64-bit builds.
Microsoft Docs:
https://docs.microsoft.com/en-us/cpp/build/reference/largeaddressaware-handle-large-addresses?view=msvc-170
Change-Id: Idb2603d9ba0ba9ef4477ce1c3174b7c7e8ba76f6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
To allow using Android 12 APIs.
Pick-to: 6.2 5.15
Change-Id: I5e9da66c84457888ec723125d16876891232a99b
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
And bump NTDDI_VERSION to 0x0A00000B (NTDDI_WIN10_CO) at the same time,
to unblock the developers from accessing the latest Windows APIs.
Pick-to: 6.2
Change-Id: Ifbc28c8f8b073866871685c020301f5f20dc9591
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This breaks the build for qmake-based applications,
with the error
Project ERROR: Could not find feature sse2.
Remove the offending section to make applications
build again.
Pick-to: 6.2
Change-Id: I0b22faa1d8d62e208d79879b822e21637bb03a3e
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Emscripten only supports
SSE1, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, and 128-bit AVX instruction
sets at this time.
https://emscripten.org/docs/porting/simd.html
Browsers might need to enable simd support in the advanced
configurations
about: config or chrome:flags
Enable by configuring Qt with -sse2
Pick-to: 6.2
Fixes: QTBUG-63924
Change-Id: Ifeafae20e199dee0d19689802ad20fd0bd424ca7
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
A qmake project built for iOS-simulator tries to find suitable devices
in xcodebuild.mk.
If no suitable device could be found, the build failed with
xcodebuild: error: missing value for key 'id' of option 'Destination'
which isn't that helpful.
Detect the situation in xcodebuild.mk and print an error message.
Pick-to: 5.15 6.2
Fixes: QTBUG-77222
Change-Id: I02f9ab0dd7b8f234bcd8d0ea387927f31ca092e0
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
With single_android_abi, the file qmake_qmake_immediate.qrc is laid
directly into the root of the build dir and not under different abis
dirs.
Pick-to: 6.2.0 6.2 5.15
Fixes: QTBUG-87669
Fixes: QTBUG-95202
Fixes: QTBUG-95235
Change-Id: Ie13cccdf2fc323e8fd725a94f3aacab465fa1287
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
It is no longer handled separately from Android.
This effectively reverts commit 6d50f746fe
Change-Id: Ic2d75b8c5a09895810913311ab2fe3355d4d2983
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
The following snippet in a .pro file resulted in a build error:
CONFIG += lrelease embed_translations
TRANSLATIONS += foo.bar_de.ts
The variable QM_FILES was incorrectly calculated. The extra compiler
that calls lrelease uses QMAKE_FILE_IN_BASE, which wraps
QFileInfo::completeBaseName(), resulting in "foo.bar_de.qm".
The $$replace call that calculates the .qm file name however, produces
"foo.qm".
Fix this mismatch by adjusting the regular expression to behave like
QFileInfo::completeBaseName().
Pick-to: 5.15 6.2
Fixes: QTBUG-79016
Change-Id: I545d1b58170cd5229007faf31c9b2c6f70ff75a6
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
If automatic signing is enabled (which it is by default), then Xcode will
happily set up the required profile if you open and run the application
in Xcode. To get the same behavior for xcodebuild, and hence from Creator,
since it's calling our Makefile wrapper around xcodebuild, we need to
pass the -allowProvisioningUpdates flag to xcodebuild.
Fixes: QTBUG-95565
Pick-to: 6.2 6.2.0 5.15
Change-Id: I9325bb228bdfb4d07658eff8f41798f7b5a6955c
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
By the time of Qt 6.2 release all new apps targeting Play store must
target API level 30 (Android 11) or above (starting in 08/2021 for
new apps and 11/2021 for existing apps' updates).
Pick-to: 6.2 5.15
Task-number: QTBUG-94451
Change-Id: Id7fa2fd62899a7259e365c917292c6c3ac0d2b0d
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Make it possible to select the C17/C18 standard with
CONFIG += c17
or
CONFIG += c18
Pick-to: 6.2 5.15
Fixes: QTBUG-96026
Change-Id: I719d22366c3efda009118d58ead173a25ed285c0
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Consider a release-only, non-framework Qt build on macOS. Building a
debug user project would fail, because qmake tried to link
against *_debug.dylib and *_debug.a libraries.
Building a debug user project that uses QtUiTools against a release-only
framework-build Qt posed the same problem. QMake tried to link against
the libQt5UiTools_debug.a, which does not exist.
Fix this by maintaining a list of library file candidates, and use the
first existing one (or just the first one if none exists). This favors
the library matching the user project's configuration but falls back to
the release version of the library if necessary.
Fixes: QTBUG-81251
Pick-to: 6.2
Change-Id: I8d641104718edb16500c6d6e3994e736fa5ddcf4
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
If QMAKE_APPLE_DEVICE_ARCHS is not set, we pick up the available archs
based on what Qt was built with (QT_ARCS), but only build the active
arch.
Pick-to: 6.2
Change-Id: I83273f878022af34a3a0d0eeae8b11d781f78c49
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This reverts commit c686e885c0
and commit d64abf8166.
We don't feature .qmake.cache/.qmake.super files anymore in the
source directory, so there's no problem anymore.
Change-Id: Ib820a109fbfbad70d85b0f14ef72915882217ca3
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
When dealing with a universal build of Qt, we would end up
using the QT_ARCH as the architecture for user projects,
but this architecture is always the primary one that Qt
was configured with.
Instead of relying on QT_ARCH, we start writing QT_ARCHS
(plural) to qconfig.pri, based on CMAKE_OSX_ARCHITECTURES,
and then use that to initialize QMAKE_APPLE_DEVICE_ARCHS.
We then resolve the active arch using uname -m, matching
what CMake does.
We still feed all the available architectures to the
Makefile or Xcode project, so that the user can build
for any of the available architectures without needing
a reconfigure.
Fixes: QTBUG-93760
Change-Id: I0d338241ba4d944ca36d85371e9c4df7dbc4f269
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This increases link time significantly; instead set
"-g4" or the new "-gsource-map" only if source maps
are enabled.
Change-Id: Ibe2d438d48e9ae2fce5f79d4e8a9f17c01cf2485
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
If we already have the list of Android ABI in BUILDS, it's not
necessary to generate extra resource while Qt build.
Amends: 58556afb69
Pick-to: 6.0
Pick-to: 6.1
Pick-to: 5.15
Fixes: QTBUG-88031
Change-Id: I344efe6c477461659a360281da59c4abeae18fc2
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Xcode's new build system checks duplicated entries when building. Qmake wants to embed
the launch screen for all types of configurations (static libraries etc.) which makes Xcode bail
out with "Multiple commands produce LaunchScreen.storyboard".
Pick-to: 6.0 6.1 5.15 5.12
Task-number: QTBUG-71035
Change-Id: I5c028e687f16e046b12156c1a8a89540deba4d3b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Since we don't feature it for CMake, there's little point in keeping it
for qmake.
Pick-to: 6.1
Change-Id: I7f17d2536510c0b94dca9767036ceab7ec08e1d8
Reviewed-by: Tino Pyssysalo <tino.pyssysalo@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
A few configure defines get changed:
QMAKE_WASM_PTHREAD_POOL_SIZE is now QT_WASM_PTHREAD_POOL_SIZE
QMAKE_WASM_TOTAL_MEMORY is now QT_WASM_INITIAL_MEMORY
QMAKE_WASM_SOURCE_MAP_BASE is now QT_WASM_SOURCE_MAP_BASE
device-option EMSCRIPTEN_ASYNCIFY=1 is QT_EMSCRIPTEN_ASYNCIFY=1
To create source maps for debugging. use
device-option QT_WASM_SOURCE_MAP=1
Task-number: QTBUG-78647
Change-Id: If9f30cd7fb408c386d6d69b5f7b1beecf1ab44b5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
To not disturb the qmake build we kept syncqt.pl in <src>/bin but
installed it to libexec. This is not necessary anymore.
This also removes the need for having syncqt.pl in both, bin and libexec
in the build dir of qtbase.
Pick-to: 6.1
Fixes: QTBUG-91076
Change-Id: I44b014ea41e3f00c420e02fd5c76f11169340b8c
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
[ChangeLog][Build System] Tools that are called by the build system and
are unlikely to be called by the user are now installed to the libexec
directory.
This is a step towards easier co-installability of different Qt
versions.
Pick-to: 6.1
Task-number: QTBUG-88791
Change-Id: Id19575b5ba27795f7715e4ea6a09391b26dd4942
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
This will be used to access host tools that are installed in
${prefix}/libexec instead of ${prefix}/bin.
Pick-to: 6.1
Change-Id: I36c4b5736330f8229d267a117c65d55cd5e12758
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Fix condition when adding qmake_immediate to resources. This condition
was wrongly positive in any non-android case, but also had to check for
BUILD emptiness or build_pass. This cause issue because
qmake_qmake_immediate was added to the RESOURCES variable earlier, than
actually generated.
Fixes: QTBUG-88031
Pick-to: 6.0
Pick-to: 6.1
Pick-to: 5.15
Change-Id: I38dad858a7e81ab709e622ec24baa8f9b80970fa
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
comply with the api version used by default with androiddeployqt and
in docs. Google play also requires api 29 as minimum.
Task-number: QTBUG-90943
Pick-to: 6.1 6.0
Change-Id: I05e2a90b4d7f2120b0198e3fb7b8b1b2398eba93
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
