This was missed in 8bebded9.
Task-number: QTBUG-63637
Change-Id: I6be472430a9aa8f533def4fd6c14c8dbfe8b6f70
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The update adds the moduleheader variable to the qdocconf
file for qttestlib.qdocconf and qmake.qdocconf. The problem with
qmake is that it doesn't have a module header file, but it does
have qmake_pch.h, which is used here. This update also corrects
several \fn commands in the qttestlib docs.
Change-Id: I2202b9db96390bac1ee491ca8a99ca9010057ce3
Reviewed-by: Martin Smith <martin.smith@qt.io>
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
In Xcode, the default value for GCC_GENERATE_DEBUGGING_SYMBOLS is YES,
which causes Xcode to emit debug symbol bundles (.dSYM) on macOS and iOS
*if* DEBUG_INFORMATION_FORMAT is also set to dwarf-with-dsym. Since that
setting is already set to an appropriate value with debug vs release
builds, the default Xcode value for GCC_GENERATE_DEBUGGING_SYMBOLS is
already correct and in effect the only thing qmake was doing was always
setting GCC_GENERATE_DEBUGGING_SYMBOLS to a wrong value for release
builds - it should be YES in all cases, to allow the .dSYM bundles to
be generated in release mode, which is in fact the only case where
they're really needed in the first place.
Task-number: QTBUG-41246
Task-number: QTBUG-50896
Change-Id: I07639a3c4ff9f62d591cde3ad66748767d475e3b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This helps alleviate a performance issues where by building iOS based
projects takes a significantly longer amount of time than it should.
Task-number: QTBUG-59136
Change-Id: I77ae12f507725ceb11106b484d73bb7d46e0845c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This is C++, not qmake code. Amends 5fa6438633.
Change-Id: Ie5b88c3a06dbe089948488ea3b4b297a08164113
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
SYSTEM is used for system() calls, while SHELL is used in the target
Makefiles.
Task-number: QTBUG-62985
Change-Id: Ia75d3939c59c98699359421166433e8b4a6ee35e
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
QMAKESPEC is added in makefile generator,
it is not in INCLUDEPATH.
Change-Id: I2451b3c7b30bc237157e68e5ce9de67f55e784b2
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
When the source file is read-only then it would copy the file with that
attribute set when it is installed. However this will cause a problem
if it is installed a second time. Therefore the read-only attribute
needs to be manually reset before installing and again before touching
the file. Once the process is done then it is set back to be read-only
to preserve the state of the original.
Change-Id: I1c01f418ef3c9bd434acd2c2b8ee695544d7bb35
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Conflicts:
examples/examples.pro
qmake/library/qmakebuiltins.cpp
src/corelib/global/qglobal.cpp
Re-apply b525ec2 to qrandom.cpp(code movement in 030782e)
src/corelib/global/qnamespace.qdoc
src/corelib/global/qrandom.cpp
src/gui/kernel/qwindow.cpp
Re-apply a3d59c7 to QWindowPrivate::setVisible() (code movement in d7a9e08)
src/network/ssl/qsslkey_openssl.cpp
src/plugins/platforms/android/androidjniinput.cpp
src/plugins/platforms/xcb/qxcbconnection.cpp
src/plugins/platforms/xcb/qxcbconnection_xi2.cpp
src/widgets/widgets/qmenu.cpp
tests/auto/widgets/kernel/qwidget_window/tst_qwidget_window.cpp
Change-Id: If7ab427804408877a93cbe02079fca58e568bfd3
It was already done correctly in the GCC generators, but lacked in MSVC.
Task-number: QTBUG-11117
Change-Id: I5e6c2e4802dbe33c0f15c46a227a08c3f0cc5707
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
the replacement value may well constitute the whole output string - this
is in fact common, given this rather typical usage pattern:
BAR = $$replace(FOO, -flag, -otherflag)
this must be considered when constructing the return value.
compare 3c8134958c.
as of now, this is irrelevant, as QString::replace(QRegExp, QString) will
always memcpy the replacement into a detached copy of the target, but one
never knows.
Change-Id: Ia1f271f45023746040fc28ce6d88a6609e05e5c2
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
technically, we should not rely on the i/o classes not storing the
strings beyond the instantiated object's life time.
Change-Id: I0990769b3cf86860184869036c096c531160e9be
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
property values are de-facto guaranteed to be backed by full QStrings,
so there is nothing to be gained from using the raw data optimization,
while doing so risks raw data leaks.
Change-Id: I3d43da9aaadd4d5811c4b1a9d7ac734049da423c
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
it's not clear why detaching would be necessary; there is no danger of a
raw data leak here.
concatenating a QStringRef with a non-empty QLatin1String (the only
expected use of this overload) will yield a detached QString anyway, so
this makes little difference in practice.
amends f137957e08.
Change-Id: I521c0e89a8b0c1ae62b1450e81b0ae91a931bcfa
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
no m_tmp is involved any more in this code path; it uses QStringRef.
amends 11d957d043.
Change-Id: Ib272d61edfb150a549c5e6a9a60d53502702e802
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
the m_tmp array is a member, so the index toggle for accessing it also
needs to be one - otherwise, odd iteration counts will defeat the
mechanism.
Change-Id: If7a800ed5a4b4168625daf1ebbd5d2d164569d8e
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
... in $$basename(), $$dirname(), and contains(). the latter case is
marginal, as it only applies to mutuals which are regexes, which i don't
remember ever seeing used.
QRegExp saves a copy of the matched string, so it's necessary to
alternate between two temporaries to avoid detaching. we already
did that in most places.
Change-Id: I97b8294585c17c76d1756f83971f42cb88353af0
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
in most cases, the main advantage is not using toQString(m_tmp), which
reduces the possibility of raw data leaks. in cases where we used
toQString() without temporary, this is a slight optimization.
Change-Id: Ib343acffd383aa2c4fefab75fb52762fb534dfc6
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
When a ObjC++ QObject subclass is listed in the regular HEADERS, qmake
creates a .cpp file. The moc file will then fail to compile, as it
requries ObjC++ headers. Using Q_FORWARD_DECLARE_OBJC_CLASS() can be
used to let the class be parsed by The compiler, but link will still
fail, as the generated methods (e.g. signals) must be built with ObjC++
compiler, in case they have ObjC parameters:
Q_FORWARD_DECLARE_OBJC_CLASS(NSString);
class MyClass: public QObject {
Q_OBJECT
signals:
void objcSignal(NSString * myObj);
};
The canonical workaround for that is including the .cpp file into the
corresponding .mm file. This also offers a compilation speed advantage,
but is somewhat counter-intuitive.
Therefore, we introduce a separate variable which instructs moc to create
.mm files directly.
Task-number: QTBUG-1581
Change-Id: Ia98af58006efd168ea37f3a63c396979e7e81baa
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
A macro name ending in R might expand to a string; if this precedes a
string constant, we're juxtaposing the strings. My first parser for
raw strings would mistake it for a raw string instead, ignoring the
part of the identifier before R. Re-worked the exploration of what
came before the string to catch these cases, too.
The backwards parsing would also allow any messy jumble of [RLUu8]* as
prefix for the string; but in fact R must (if present) be last in the
prefix and *it* can have at most one prefix, [LUu] or u8. Anything
else is an identifier that happens to precede the string. Reworked
the parsing to allow only one prefix and not treat R specially unless
it's immediately (modulo BSNL) before the string's open-quotes.
Add link to the cppreference page about string literals, on which the
grammar now parsed is based.
Added a test for the issue this addresses.
Verified that this fails on 5.6, dev and 5.9 without the fix.
Expanded the existing test to cover R-with-prefix cases.
Task-number: QTBUG-55633
Change-Id: I541486c2ec909cfb42050907c84bee83ead4a2f4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The $${TARGET}_manifest.bak file was not removed on "nmake clean".
Task-number: QTBUG-59827
Change-Id: Ia5b636f4917f3e7a2df8d753824b72e63d278005
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
QMAKE_LINK_OBJECT_MAX is actually a property of the host, not the
target.
this works around binutil's inability to use thin LTO objects in
conjunction with an MRI script
(https://sourceware.org/bugzilla/show_bug.cgi?id=21702).
Task-number: QTBUG-61335
Change-Id: I90a1334b9c905c433b35546e8f3f3b5089d2c65b
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
The strings remember in which file they were created/assigned.
However, this used a non-counting reference to a ProFile, which could
become dangling. If a subsequent ProFile re-used the exact same address,
a string's source would be mis-identified, which would be fatal in
conjunction with discard_from().
Since we actually need only a unique id for comparison, let's use an
integer for that.
Task-number: QTBUG-62434
Started-by: Simon Hausmann <simon.hausmann@qt.io>
Change-Id: I395153afaf7c835d0119690ee7f4b915e6f90d4a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
... and use it when building shared libraries and plugins.
It prevents application crashes in cases when libraries and
plugins are unloaded and their strings are still used by
the main application.
Task-number: QTBUG-51602
Change-Id: I4af79183f18c5ed6142d55af02a36fe4334f3fee
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The attempt at loading these functions at runtime with WinRT always
failed, so stop trying.
Change-Id: I658f552684924f8aa2cafffd14cfc5179ac08498
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Task-number: QTBUG-59301
Change-Id: I2562b862465a52ecc56f551bcdb98fa7279ebfcf
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
If these rules are not added to the solution, Visual Studio will
complain, that the project has to be deployed before it can be run.
Change-Id: I6d3fbc949c85b11a92f78e13e2f6a1b92a5cfdc7
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The old docs contained obsolete information. Also, the new docs
match the new docs for the other Apple OS deployment targets.
Change-Id: Id773fa2086f291d8a2552fe1b339ec1e13c19d74
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
The following variables were not documented:
- QMAKE_IOS_DEPLOYMENT_TARGET
- QMAKE_TVOS_DEPLOYMENT_TARGET
- QMAKE_WATCHOS_DEPLOYMENT_TARGET
Change-Id: I5cfb6c0024d92e943aed882fd01bc2a4f2c7c042
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
This deduplicates the code between QFileSystemEngine and QLockFile.
Change-Id: I1eba2b016de74620bfc8fffd14cd005d5fd9beaa
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Also wrap two blocks in braces, since the formerly-else block spreads
across many lines; and split those lines differently to limit length.
Change-Id: Ib89329b11aad6599926f0338d6546f4141d2c002
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
If several Makefiles are used in the same directory (for example, for
multiple projects in the same directory or different build configurations),
they all reference the same object_script, which is obviously wrong.
Change-Id: I9b499ceb6b6bd6058f54b452fa44bfb2313eec26
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This fixes the following warnings when building qmake:
Makefile:359: warning: overriding commands for target `qrandom.o'
Makefile:335: warning: ignoring old commands for target `qrandom.o'
Change-Id: I2c7abbe095862303c1969a70f61b8a57009d44ee
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When generating a project, the directories can be specified as arguments
to the qmake call. As a result files can either be incorrectly added to
the project with a leading slash, or can end up duplicated. By passing
the absolute path with the file, it ensures that the file is added
correctly and no duplicates occur as a result.
Task-number: QTBUG-48342
Change-Id: If774de8d7f5cceca80042a25a3aa4e5b045249da
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This was already done on unix, but not for MinGW.
If the archive already exists, it is appended rather than replaced.
This can cause invalid references when whole-archive linking is used
and some object file that was already linked was deleted.
Change-Id: Ie265371f197d996d57002b248043736544ee641e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
adding shared install paths via QMAKE_LFLAGS in the spec has the tiny
side effect that they are searched _first_, which is generally a really
bad idea - they should be _last_.
for that purpose, introduce QMAKE_RPATHLINKDIR_POST, and migrate all
specs to use it.
QMAKE_RPATHDIR_POST is added for consistency, but not actually used.
Task-number: QTBUG-59457
Change-Id: Iac6cda5e9111ef8cca454a69861fe8408bb40589
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
adding shared install paths to QMAKE_{INCDIR,LIBDIR} in the spec has the
tiny side effect that they are searched _first_, which is generally a
really bad idea - they should be _last_.
for that purpose, make QMAKE_{INCDIR,LIBDIR}_POST live up to their names
(i.e., search them actually last) and migrate all affected specs to use
them.
Task-number: QTBUG-40825
Change-Id: Ie0de81c3cc49e193186d2fedd7d6c77590c8ef79
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Every /Zc:XXX option qmake doesn't know about yields a "WARNING: Could
not parse Compiler option '-Zc:XXX'; added to AdditionalOptions."
Put all /Zc:XXX options we don't handle into AdditionalOptions without
printing a warning. There's no point in making all options known to
qmake and updating them for every MSVC release.
Change-Id: I319e027791a7b0a29d139ee3074ab1aed8ce8a63
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
As the directory installation command also works with files as a source
we can unify the external commands, resulting in simpler command lines.
Change-Id: I65013626eedbdb3ce1c77ed230d46edd1603b986
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The same as for other visual studio versions use "x86" as arch instead
of win32. arch is used to determine library paths and these use x86 and
not win32.
As compilerArch is not used in MSVC 2017 it can be removed.
Task-number: QTBUG-60530
Change-Id: I47157eb1d7ae9d913461210d34858ffb37c81586
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Similar to the two parent commits, this patchs preserves the time stamps
of files we install as a result of recursive directory copying.
Change-Id: Id5931a467196d5cd67acfa0deffc2488af8a3669
Task-number: QTBUG-59004
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The result of "make install" should be the same regardless of whether it
has been run multiple times and the destination exists already. This is
done by making the file installation calls always take canonical source
and target paths and not look at the target directory.
Task-number: QTBUG-60370
Change-Id: I83a584c0dbc4fd10c79976d4169bf6bc051884a1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
As for the formatting code, de-duplicate the parsing code by only
parsing char*s, converting QChars to Latin-1 first in a small buffer.
The QUuid(const char*) ctor performed no length checking, relying
instead on the checks performed within _q_uuidFromHex(), which
includes an implicit check for premature end (because NUL is not
a valid token for the parser).
The (QString) and (QByteArray) ctors did perform length checking.
To the extent possible, this is removed, since it is handled by
_q_uuidFromHex(). Failure cases need not be optimized. Only the
QLatin1String overload needs to do some checking, because views in
general are not NUL-terminated. The QStringView overload can just
append a NUL when it converts to Latin-1.
The only check I added to _q_uuidFromHex() is that for src ==
nullptr. It would otherwise be duplicated in several callers.
While touching the internal functions, port to passing and returning
by value.
Saves 1.6KiB in text size on optimized GCC 6.1 Linux AMD64 builds,
even though we added new API.
Port some users to the new functions. Expand fromString() test.
[ChangeLog][QtCore][QUuid] Added fromString(QStringView/QLatin1String).
Change-Id: I519339419129550c86e0ea80514865cd6a768f5d
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The original commit only added support for GCC and Clang, but not ICC.
Amends 73331eeb
Change-Id: Id7638cf1b538edb1008fb3aa10754c1f517a994f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Similar to the parent commit, this patch adds a unified code path in
qmake itself for installing program files while preserving their
original last modification timestamp.
Change-Id: I7b7dcfa6228c2bfd48ea6036549398bb6f90032f
Task-number: QTBUG-59004
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
On non-windows platforms, we use the "-p" parameter of install(1) to
preserve the last modification timestamps of files. On Windows the use
of copy does not preserve them. As a cross-platform solution, this patch
introduces a simple built-in install command in qmake to copy files.
Task-number: QTBUG-59004
Change-Id: I3064d29a2b8c7b009a1efbf8f00b84c079ea5417
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
projects using a dynamic build are not supposed to access this variable
anyway.
Task-number: QTBUG-51598
Change-Id: I81b55ea9ba460b80919f40ed7fe3d52129636b9e
Reviewed-by: Michal Klocek <michal.klocek@qt.io>
Reviewed-by: Jonathan Liu <net147@gmail.com>
When having Qt sources in a symbolic link "shadowed" did not work
because _PRO_FILE_PWD_ used canonical path, while source_root did not.
Due to this mix it was possible that shadowedPath did not find any
"common denominator" and always returned and empty string. The first
place where things broke was while running config.tests.
Task-number: QTBUG-59319
Change-Id: If73ecbc58290ee9113f887a73c312ebfb5e20a33
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The parsing code anyway operated on a QByteArray created from
toLatin1(), so expose this to the user by providing a QLatin1String
overload.
Also provide a QStringView overload, since we can. Port one user (in
qmake) to the new overload.
[ChangeLog][QtCore][QVersionNumber] Added QStringView and
QLatin1String overloads of fromString().
Change-Id: Idbff44c3997f5cfa86ea1bce8b3da4b700a3d9cc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add ProString::toQStringView() to avoid creating QStrings just to pass
them to QString::arg() (single-arg; multiArg() does not, yet, accept
QStringViews).
I could have used the existing toQStringRef() function, but QStringRef
is a tad more complex to copy and quite a bit less future-proof.
Change-Id: I344c46f301768e844c487d36ce3e6cb276de8843
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
files is not a test function.
Change-Id: I6d23dac5d1c87bd35961406dd62cc3cf37d652e3
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
documentation of QMAKE_DEVELOPMENT_TEAM and
QMAKE_PROVISIONING_PROFILE
Change-Id: Id5854862e44387e31db40f574d85f88512c27f0c
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Due to that uninitialized variable /DEBUG:FASTLINK ended up in vcxproj
files for VS < 2015. However, that option is supported by VS >= 2015
only.
Task-number: QTBUG-59630
Change-Id: I34d9eef1a3bf2262bac48962938afe84eb7de934
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
qmake really lacks version comparing functions:
users either use ugly constructions to compare versions
by components, such as
greaterThan(QT_CLANG_MAJOR_VERSION, 3)|greaterThan(QT_CLANG_MINOR_VERSION, 4):
or even incorrectly compare versions as strings:
!lessThan(apple_clang_ver, "5.1")|!lessThan(reg_clang_ver, "3.4"):
Add test functions versionAtLeast and versionAtMost which use
QVersionNumber to compare version numbers by components.
Change-Id: I65e6b3c296d0301d544b7e38bf3d44f8d555c7fc
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The warning comes from the MS headers, not from the compiler.
Task-number: QTBUG-59576
Change-Id: Ie67d35dff21147e99ad9fffd14acd7fb628fa1d4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Adding the /utf8 compiler flag resulted in undefining all preprocessor
symbols for VS project files, because the ingenious compiler option
parsing logic checked for a 'u' prefix, and "utf8" obviously matched.
The /utf8 flag is added to the additional options, because there doesn't
seem to be an XML tag for that.
Task-number: QTBUG-59431
Change-Id: I762fcdcf6caf0606b40633861e265df5edb4a9c4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Adding both development team and provisioning profile to Xcode
switches off the automatic signing
Task-number: QTBUG-38782
Change-Id: Ic869e16490c11e369b6674c815e860cac66c5afa
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Call sites of NmakeMakefileGenerator::writeResponseFileFiles expect that
the output is terminated with '\n'. Do not bail out if files is empty.
Task-number: QTBUG-59305
Change-Id: Id3fef8dbc506dad1868e6b352119f5f27b50a368
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The code in question is obviously checking for support of QProcess, not
for general bootstrap mode. You can manually disable QProcess, in which
case it is still not available after bootstrapping is done.
Change-Id: Ia99810b8900621911a31912034358a01af4f18a0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
On POSIX compliant platforms, the default precision we apply to
preserving time stamps is seconds. However we can do better and use
utimensat() - if available - to increase the precision to nanoseconds.
The values are provided by statbuf's st_mtim. This is guarded for
compatibility with older systems, similar to commit
494ced1329.
Change-Id: I6928660230d84f8511bf0f58e268906d2e575e04
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
In the source list, put one file on each line, sort alphabetically
within each of several blocks (preserving the order of those blocks),
add missing entries for which we have rules. Document where QTSRC and
friends come from, eliminate duplication between their entries and
DEPEND_SRC (which pulls them in anyway). Document strays not in OBJS
or QOBJS, fix qmake.pri to add to SOURCES not OBJECTIVE_SOURCES.
Put OBJS and QOBJS entries in the order that matches DEPEND_SRC.
Change-Id: Id38cccd9b1f849a865a265bc0e6ce4c426c42eea
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Also split a long list of -I flags so that "for each platform" dirs
all land on the same line, rather than breaking part way through the
platform list.
Change-Id: I855f6b152567bc2031e08361d2b02a788df8287e
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Most continuation lines in long variable values indented with a tab
and some space; three used spaces only; make them match the rest.
A foolish consistency is the hobgoblin of my little mind.
Change-Id: I7e51ea830040efe62801e80a49486d26dd2a3978
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
I found no $(QMKGENSRC)/mac/xmloutput.cpp; but skipping the mac/ in
its name reveals a perfectly good file, that might even be relevant.
It's also the file named in a rule further down the file.
Change-Id: I72b399f9c3c222fc6beed29f2007fe55ba5b8412
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Linking with too many object files could lead to "LNK1170: line in
command file contains 131071 or more characters". Do not write all .obj
files into one line but respect a limit of 1000 characters. If the limit
is reached the object files are separated by newlines instead of spaces.
Task-number: QTBUG-58710
Change-Id: Ibae1f737d6b614a9624b4e00cdd21d3722d341e3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
the file contains no code.
this avoids complaints from ar/ranlib in static/bootstrapped builds.
Change-Id: Iee22ffc61a5f9ea8c25f5455b7e8e017ac521624
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
in particular, -before (just for symmetry, as it's the default), -early
(the actual objective), and -late (for symmetry again).
Change-Id: I274303582a348b052c3e5106ff360ab4fd7d4ee2
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Commit 52d64fca66 made qlibraryinfo.obj be
compiled with an extra -D argument, but that doesn't take effect since a
precompiled header is in effect.
Warning #673: the initial sequence of preprocessing directives is not compatible with those of precompiled header file "qmake_pch.pchi"
qlibraryinfo.cpp(61): catastrophic error: cannot open source file "qconfig.cpp"
Change-Id: Iab7c358838e1487387a2fffd149d74a9aa2be338
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This ensures at compile-time that Qt libraries do not use any APIs that
are not safe for use in application extensions, and fixes warning
messages that appear when linking to Qt libraries that are not built
with this flag, when used in an application extension.
This is especially important on watchOS where *all* "applications" are
actually application extensions, and on other Apple platforms if
application extensions are developed using Qt.
Task-number: QTBUG-40101
Change-Id: I022046f2584e0222253d33052b0abc221d7c93d6
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
prelink was not supported at all for ar.
postlink was done for most cases, but missing in one particular ar
invocation.
Task-number: QTBUG-57276
Change-Id: Ic72c42a9502c97d7111b3f3941b387024d46a27d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
[ChangeLog][QtBase][General] Removed support for WinRT/Windows Phone 8.1.
Task-number: QTBUG-57288
Change-Id: Ifd6d6780cbbdb710d99556ba3d2fb2e514d4f789
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
These code paths have not needed to be exercised since Xcode < 3.2 was
dropped from support, which is beyond ancient at this point.
Incidentally, this removes use of a deprecated function.
Change-Id: I3e5a45794c21b434b31a48da8a8b0ff22f2852fa
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
When generating the Visual Studio project XML, the filter "Root Files"
was not being output. Specifically, this means that even if RC_FILE was
specified, it would not be included properly as a resource compilation
target in the resultant Visual Studio project file.
This is essentially a rather belated cherry-pick of qt/d6de960b7f.
Task-number: QTBUG-57914
Change-Id: I7d03dc818df0cf36608012f1a71a3a476d8a9ff7
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
the arguments after '--' are by definition meant only for the top-level
project, as that's where configure is invoked from. passing them to
sub-projects just adds noise to the make output and misleads users.
note that this specifically does not support qmake -r, which will break
if the subprojects rely on the arguments being absent. this isn't a
problem, because the qt build doesn't support qmake -r anyway.
Change-Id: I7ecff6212ce3137526005fc324a4a7ae45e3345e
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
turns out that just appending builtin-qt.conf isn't a good idea:
executable-editing tools (objcopy, prelink, etc.) will happily drop the
"attachment".
a safe method would be adding a proper section to the executable, but
there doesn't appear to be an objcopy equivalent in msvc, and using
entirely different methods of embedding the file with different
toolchains seems like a rather bad idea.
so instead go back to the old method of building qmake with a generated
qconfig.cpp. of course, as said file is now created by qmake itself, we
have to compile qlibraryinfo.cpp a second time, and link a second qmake
executable.
Task-number: QTBUG-57803
Change-Id: I9e232693550aa870cec154e49cc06add13017cc2
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Most of these involved moving or removing extraneous
aide-memoir comments left by programmers between qdoc
comments and their functions. There were also some
cases where Q_CLANG_QDOC had to be tested to make
something visible to clangqdoc. And there were a few
functions that should not have been documented at all.
Change-Id: I3bf7c397a9e5ddbffc40cc1fee7f19cad71a1ae7
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
now that configureapp does not use it any more, qmake is the only
remaining user. and the license headers already claimed that this code
is part of qmake ...
Change-Id: I9b8a16f8f2b432d2b1143efbdd1f0042305ccc0c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since we can tell the MSVC version from the compiler now, each of the
qmake.conf files is now the same, so let's just have "win32-msvc" and be
future-proof. Likewise for win32-clang-msvc.
qplatformdefs.h was already common.
Since we can't obtain the MSVC version from the unified mkspec name any
more, I dropped the warning level during the qmake bootstrap to reduce
the number of warnings that need to be disabled from compiler version to
version.
There is no point in keeping the old mkspecs, but configure will re-map
the -platform argument to the unified spec as necessary, to keep
existing configure command lines working.
[ChangeLog][Visual Studio] Qt now has a common mkspec for all Visual
Studio versions, called "win32-msvc". The old names which contained the
version number are now gone (but qmake scopes based on the old names
continue to work). The version of the compiler can be obtained from the
MSC_VER and MSVC_VER variables (for example, for Visual Studio 2015,
those contain the values 1900 and 14.0, respectively). Those variables
are also available with the Intel compiler (win32-icc) and with Clang
(win32-clang-msvc).
Done-with: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Change-Id: Ib57b52598e2f452985e9fffd14587c0a77a5c09c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
the code was broken since 5.0, as it still hardcoded the version number
4 for the plugin basenames.
wince is not supported any more, so there is no point in trying to
restore the code to function.
at a later point, we'll make QTPLUGIN universal enough to cover both
static and dynamic deployment.
Change-Id: I0911ce4aff7a799dd471d6218e046f13dca6d49e
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Before VS 2013 ToolsVersion contained a .NET version
number (e.g. "4.0"). Since VS 2013 ToolsVersion is the same as the
Visual Studio version number (e.g. "12.0"), which is also the default.
We always wrote "4.0" (except in one special case which used
"14.0"). This doesn't bother Visual Studio itself, but other tools
like PVS-Studio.
Remove the ToolsVersion attribute from generated VS projects for VS
2013 and newer.
Task-number: QTBUG-57694
Change-Id: I7a3bc4534c492e9540f6b968bee8a969980df63f
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Change dcd2f829 introduced fake files with the extension .cbt for custom
build tools that generate code from C++ source inputs. The moc_predefs.h
header file falls into this category, because it is generated from
dummy.cpp.
It turns out that these fake files have to exist. Otherwise the
custom build step is executed on every build. That means re-moccing all
mocables on every build.
Fix this by actually creating the fake .cbt files with some
explanatory comment in them.
Task-number: QTBUG-57695
Change-Id: I251294334425d9914677787d8ba6da1169b4cca5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
there is no point in iterating BAR if FOO is (or became) empty.
Change-Id: I86c89bf0ad726a5ab7ead990a27ef7cc32caebbf
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
this is of marginal value, as only our own code ever messes with
QMAKESPEC, and we mostly stopped matching on the spec in favor of
compiler and platform flags.
Change-Id: Ibdd9a9c85067623f0f1f064d139d23b4e6b0677d
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
since ab0cc305, the spec will be replaced by an entirely new one during
configuration, and so needs to update the path separator for
$$shell_{path,quote}(). however, the latter didn't happen, as the spec
reloading doesn't go through the "real" spec loading path.
Change-Id: I45ab3156b8e040f683328ac46e48b09c2eb94ef7
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This tag was never spelled "PlatformToolSet". The correct spelling
is "PlatformToolset" (lower case s). VS itself can load qmake-generated
projects despite this misspelling, but tools like PVS-Studio are
bothered by it.
Task-number: QTBUG-57435
Task-number: QTBUG-57694
Change-Id: Ib70e8561f1827e195194bcf518445b2909a8d8c0
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
this moves us another step towards the "outer" configure doing just
minimal bootstrapping of qmake.
a challenge here was that so far, qmake itself needed qconfig.cpp. this
was replaced by usage of a qt.conf file instead of compiled-in values.
however, to make the executable still self-contained, that qt.conf is
embedded into it (by simple appending of a fixed signature and the text
file).
the qmake with the embedded qt.conf is not used for the qt build itself,
which instead relies on the qt.conf in bin/ as before. however, due to
the missing built-in values, this file now needs to contain more
information than before. but except for a minimal version that is needed
to start up qmake/configure at all, that file is now also generated with
qmake. as some of the newly set up properties are subsequently used by
configure itself, qmake gains a (deliberately undocumented) function to
reload the qt.conf after it's fully populated.
unlike the old implementations, this one doesn't emit redundant qt.conf
entries which match the hard-coded fallbacks. omitting them leads to
leaner files which are more comprehensible.
Started-by: Paolo Angelelli <paolo.angelelli@qt.io>
Change-Id: I4526ef64b3c89d9851e10f83965fe479ed7f39f6
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
otherwise, infinite loops can result, as amply demonstrated by the new
configure (which duly replicated the old configures' behavior ...).
QMakeEvaluator::evaluateBuiltinExpand() now returns a VisitReturn like
all other evaluate*() functions. the string list return value is now an
out parameter; i used a reference instead of a pointer to avoid
adjusting 56 usages of it.
Task-number: QTBUG-13964
Change-Id: I51ca7df8d694c6ffe9d9899cba414b1b46f5ce95
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The phrase "which as been" lacked an h (albeit one silent in some
anglic dialects). The added letter made an already long line stick
out just a little more. Judicious rephrasing of the early part of its
sentence made reflow a way to fix that.
Change-Id: I29c2ac79d08a135dd4a16518f459872c8ecd1f24
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
eliminating everying TARGET-related was a nice try, but in the real
world (e.g., qttranslations), extra compilers are activated by
PRE_TARGETDEPS, which of course doesn't work when TARGET is entirely
gone.
so instead, let it act as a phony target. this is consistent with the
unix generator.
supersedes 0810d48bc in amending af2847260.
Task-number: QTBUG-57423
Change-Id: I3d2ecc4ff42b37ffe5f71f5c20d17c06b31f4da2
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
For QMAKE_EXTRA_COMPILERS with inputs that are "buildable" (e.g. C++
sources) the custom build step is added to the output file. From Visual
Studio's point of view this looks like a circular dependency (e.g.
foo.moc generates foo.moc). Usually this just prints a warning that can
be ignored. But this circular dependency also breaks dependencies
between custom build steps. This became noticeable when the generation of
moc_predefs.h was added. Generating moc_predefs.h must be done before
any moc custom build step is executed.
This patch fixes the issue by using fake files (output file plus suffix
".cbt" for "custom build tool") that act as dummy inputs for the custom
build tools.
Task-number: QTBUG-16904
Task-number: QTBUG-57196
Change-Id: I4711e44a0551046d215db151fa0312af8a9177a2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
it's wrong to use the escape function for makefiles, as the command
goes directly to a popen() call.
Task-number: QTBUG-57343
Change-Id: I34a8e4d8fb406303c593e7c1e24019e0f756e7f8
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
The values of this hash are strings, not lists of strings.
Enforce this by using the proper type instead of just using a comment.
Change-Id: Id8a13acdceb8f9f8a9a8eaa04e790b1e6cd5faa7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
