Apparently the Linux asm assumptions are not correct for the
x86 Android emulator and this caused Android apps not to work
properly: signal connections being queued instead of being direct,
crashes in QPropertyAnimation, etc.
Using currentThreadIdImpl on the Android emulator works fine though.
Optimizing the code for the Android emulator case can be done in
another change.
Amends 5e9b2ade67
Fixes: QTBUG-85640
Change-Id: I3b3ba76ea143aed949a6e50678c850b6ba231476
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Given QList-is-QVector, remove an historical piece of code.
Change-Id: I7a8876be8ade6dbaa1822d773b092ddb3c4182d4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The convenience API used to look up the index of a named capturing
group expects NUL terminated strings. Therefore, we can't just
use it together with QStringViews, which may be not. Use the
non-convenience API instead.
Pick-to: 5.15
Change-Id: I25ca14de49b13ee1764525f8b19f2550c30c1afa
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Remove QTypeInfo::isStatic, as that's not used anymore in Qt 6.
Also remove sizeOf, it's unused, and we have QMetaType for that if
required.
Remove all typeinfo declaractions for trivial types, as the default
template covers them correctly nowadays.
Finally set up a better default for isPointer, and do some smaller
cleanups all over the place.
Change-Id: I6758ed37dfc701feaaf0ff105cc95e32da9f9c33
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Configure Qt with -DQT_FEATURE_headersclean=ON to enable the
check. There will be separate target for each module include
(e.g. QtCore_header_check), but the check will also be done
when the module is built for the first time.
There are notable differences to the qmake version:
- the build does not pick up anymore default defines or flags from
the module, or Qt. Instead options like -fPIC they have to be listed
explicitly. Also for this reason, we have to skip the vulkan-related
headers from the check, since vulkan/vulkan.h is not necessarily
in the compiler's default search path.
- some checks for nowadays unsupported compiler versions are
removed.
- -Wdouble-promotion -Wshorten-64-to-32 is not added for clang
builds; the qmake code path did never enforce that on CI
machines (it was non-Apple clang only), and the check currently
fails on these configurations.
Fixes: QTBUG-82615
Change-Id: I1cd303677b1472116910b6c27748f96436feb35e
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Keep the same behavior as desktop platforms with
QApplication::arguments() should return a string list of args
not a string of args together.
Task-number: QTCREATORBUG-23712
Change-Id: I1874655427f5c902ca81a3fcf6183d0eeccbfef7
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Having three methods with the same name doing different things is
unnecessarily confusing, so follow the standard naming convention in
Qt and call the getter of the resolve mask resolveMask, and the setter
setResolveMask. These methods were all documented as internal.
The publicly documented resolve() method that merges two fonts and
palettes based on the respective masks remains as it is, even though
'merge' would perhaps be a better name.
Change-Id: If90b1ad800834baccd1dbc38fc6b861540d6df6e
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Clarify that the variable must point to a directory with a specific
structure, and how the name mangling is applied to the deployed
plugins.
Pick-to: 5.15
Fixes: QTBUG-60022
Change-Id: I949cd73f65f86d4902eeab41fa7e5c6e6ffe44c3
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
It wouldn't grab the cached entry since it was not deemed
"fresh" (and would never be fresh because we didn't know when it
originated from or when it expired). But the test still passed because
the reply produced a "finished" signal which ended the loop, but the
"finished" signal was due to an error which was unchecked.
Change-Id: I6ad271aa621bdb4a48b74bc8fd64c7e2caa8f179
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
Use the following env vars to help conceal private signing information:
- QT_ANDROID_KEYSTORE_PATH
- QT_ANDROID_KEYSTORE_ALIAS
- QT_ANDROID_KEYSTORE_STORE_PASS
- QT_ANDROID_KEYSTORE_KEY_PASS
[ChangeLog][Platform Specific Changes][Android] Added the option to
conceal package
signing information using environment variables.
Task-number: QTBUG-84922
Change-Id: I1fac51ed9e88ef42c761bc916ba1c3bf439806e8
Reviewed-by: hjk <hjk@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Use any definition from pkgconfig for the EGL compilation test.
Change-Id: I95c659b87ab7b0de81f000e3f52195161a493ef5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This makes high-level event dispatching easier: for example in Qt Quick,
all pointer events should eventually be delivered to items in a similar way.
Implemented in a similar way as d1111632e2.
Change-Id: I2f0c4914bab228162f3b932dda8a88051ec2a4d7
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This requires a QAbstractFileIconProvider in QtGui, as the standard
QFileIconProvider depends on QStyle, and cannot be moved out of
QtWidgets.
QAbstractFileIconProvider returns strings for file types, but returns
no icons yet. Support for a default icon set might be added in a
follow-up commit.
Change-Id: Ib9d095cd612fdcf04db62f2e40709fcffe3dc2b7
Fixes: QTBUG-66177
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Otherwise it would be missing some, e.g. QStringList(qsizetype).
Change-Id: I5214672e62c98514b37b09d283e6035c799eda99
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
make apk takes a LOT of time, showing that it's not hanged it's useful.
Change-Id: I4fb11e0f535cf2311d71dff3710135b465ecc06b
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
QML2_IMPORT_PATH it's usually set by CI to tell the QML apps where to
find the QML components
Change-Id: I57d1cbc3d0fce9be257648268da0a5f9d61d81e9
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
While it could be done before it's nice to not have a custom "local"
struct or the size in an out-parameter.
Change-Id: Ie910f7060b1dadf037312d45e922f8e2deafe3ec
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
And put a note about it in the documentation
Change-Id: I29126e4a80f83c256190e03b8fe01f3c869fd46d
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
And not the ssl configuration we have on the reply since it's missing
e.g. the newly received session ticket.
Change-Id: Idfeb09012a847605a76d1fe4fb881c663d019b4a
Reviewed-by: Peter Hartmann <peter@edelhirsch.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
and not just the active one(s). When starting the connection with
HTTP/2 and calling QNetworkReply::ignoreSslErrors() it would previously
only ignore the errors in the single active channel that was used, but
if we then fall back to HTTP/1.1 then we'll use the 5 other channels as
well, and those would then fail due to the ignored ssl errors.
Change-Id: I7aeb5b59897dd3a53579f0d38bd255bc2d97c2bb
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
HTTP/2 is only used initially before it transitions to using HTTP/1.1,
and in this case the amount of connections established should also
reach 6.
Change-Id: I300e171e46c846df1730c07469ea85a51cecfb63
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
First and foremost the condition was wrong ...
In order to help running qml test cases on Android without any android
specific hack on
user's .pro files we copy the entire project folder to assets. I copy the
entire folder
and not only the tst_*.qml files because it might contain data which is
needed by the tests to run.
Change-Id: I06323d9d52904317410dd2f440de65a0766a48b5
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
As this class is a subject of the library hook data, there must be a
solid understanding of the member's alignment and padding across
different architectures. By reordering the layout, this patch provides
a clearer way of adding new members to the class.
Bump the TypeInformationVersion field in qtHookData, to notify the
Qt Creator developers that the offset of QFilePrivate::fileName was
changed and dumpers should be adapted.
Change-Id: Ied8b69bdeb9da50ff05aba2107bc75509674b18e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* QString("1234,56").toDouble(&ok); always operates
in the "C" locale and therefore ok is always false
* Explicitly state that the return value is zero
when ok is set to false
* Made snippet compileable by giving str a type
Pick-to: 5.15
Change-Id: I403eb39ca78a5f9ceb92ccd8ac3539581294796c
Reviewed-by: Sze Howe Koh <szehowe.koh@gmail.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
When you bind more values than the query has placeholders,
indexes will be empty which causes an out-of-bounds access in indexes.first.
We can't check the parameter count because of multiple placeholders with the same name,
so we check if the name is null.
Tested with SQLite and PostgreSQL
Pick-to: 5.15
Change-Id: Id5d4bd15d7ed16603f47b87d6e0bf811a20157d8
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
As it's the right thing to do to preserve const correctness.
Fixes: QTBUG-85833
Change-Id: I0d45442c5e2b997998bba8dc894fee75da3e8e8c
Reviewed-by: Samuel Gaist <samuel.gaist@idiap.ch>
event()->device() was the most common use case anyway.
The idea that the "parent" of a QEventPoint is the QPointerEvent
interferes with the ability to copy and move event objects: the parent
pointers are dangling unless we use the QPointerEvent subclass
destructors to set the points' parents to null. Since there is no move
constructor, even returning a QEventPoint from a function by value
results in destroying the temporary instance and copying it to the
caller's space. So the parent pointer is often useless, unless we do
even more work to maintain it when the event moves.
If we optimize to avoid copying QEventPoints too much (and perhaps
enable exposing _mutable_ points to QML) by storing reusable instances in
QPointingDevice (which is the current plan), then the actual parent will
no longer be the event. Events are usually stack-allocated, thus
temporary and intended to be movable.
Change-Id: I24b648dcc046fc79d2401c781f1fda6cb00f47b0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Follow the naming convention and remove workarounds in ctors.
Change-Id: Ic7f9de074edab7db369803612a2a2a4ea3deaf57
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Those are only used by the only friend of the class. As that one can
already poke into QSequentialIteralble's privates, there is no point
in exposing further methods in the public API.
Change-Id: I368e7bcfc43c31f38a42a41a339ff3135d79417c
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The QPF2 font engine has been kept around for compatibility
reasons in Qt 5.x, and it is time for it to retire for now. If
we want something like this in the future, we can revive it with
hardware acceleration / Qt Quick as one of the primary use cases,
but for now, it seems that Freetype and our existing caching is
sufficient also for low-end use cases.
[ChangeLog][QtGui][Text] Removed support for the legacy QPF2 font
format as well as the makeqpf tool used to generate those files.
Change-Id: Id43039c92fe5bd95b628cd769e045c029f39a350
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This triggered a crash in QtQml, where an manually created
metattype interface set the PointerToQObject flag to true while
not providing a metaobject.
Change-Id: I206fb9655058a1e8a2d04e44186b05db33358338
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The constructor wasn't constructing a QVariant holding a
QDataStream, bug loading the variant from the datastream.
This is opposed to how QDataStream works in all other places,
and also not in line with all other constructors for QVariant.
[ChangeLog][QtCore][QVariant] Removed the QVariant(QDataStream)
constructor. Use QVariant().load(datastream) instead.
Change-Id: I6ac54e12166b9383c09c3940eef2516f896fd359
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
