there is no reason to expect the various list elements to be
space-encumbered, or to tolerate it if they were.
Change-Id: I1a2e5c8d30456b640408503334c55f9262792db5
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
there should be no flags other than /LIBPATH: in LIBS (and the variables
that end up in it) - these belong into QMAKE_LFLAGS.
while not very important, this change enables the use of drive-relative
paths using unix path separators.
note that on unix, arbitrary flags must be supported in LIBS due to GNU
ld's --push-state and related position-dependent flags (-whole-archive
in particular). luckily, on unix, flags start with a dash, not a slash.
Started-by: Dyami Caliri <dyami@dragonframe.com>
Change-Id: Ie5764f14d34ad13020ca010499594eed8c69a4a1
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
On OS X with a framework-based build of Qt, the 'Libs:' line of the
.pc files generated by `qmake` references the framework. This requires
two separate arguments to the linker: The fixed string '-framework' and
the name of the framework (e.g. 'QtCore'). Only the latter might need
quoting. Prior to this fix, they were treated as a single argument (e.g.
'-framework QtCore'), thus always quoted because of the contained space,
and later lead to errors when trying to link a Qt framework discovered
via `pkg-config`.
Change-Id: I5c11ee651048832007e2ee4ebcbcf2e3212c8f48
Task-number: QTBUG-47162
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Consider a debug_and_release build of a static library.
Set DESTDIR to different values for debug/release.
Let TARGET be the same for debug/release.
Now qmake would generate code in Unix Makefiles like this:
rm mylib.a
ar mylib.a ...objects...
rm debug/mylib.a
mv mylib.a debug/mylib.a
and for release analogous. This clashes when building in parallel.
This patch resolves this conflict by reducing the commands to:
rm debug/mylib.a
ar debug/mylib.a ...objects...
We believe that every ar implementation that's in use for Qt
is able to operate on files in subdirectories.
[ChangeLog][Important Behavior Changes][qmake][Unix] QMAKE_POST_LINK
steps of static libraries are now required to operate on $(TARGET) in
$(DESTDIR) instead of $$OUT_PWD. This matches the Windows backends.
Task-number: QTBUG-48287
Change-Id: I192f488ed74c56bc32862426d9e9d4237d9b8135
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Set defaults before parsing compiler options.
UsePrecompiledHeader, CompileAsWinRT and GenerateWindowsMetadata
options were overwritten after parsing the options.
Task-number: QTBUG-46978
Change-Id: I8c4e423cd13f575fa679b114108b693937908549
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Andrew Knight <andrew.knight@intopalo.com>
$ORIGIN (or $LIB) needs to be escaped to survive the trip through
make and the shell.
this shouldn't break anything, as there was simply no way to get it
right so far.
Change-Id: I86337c5994d10dae2e80dd2f858f74874b14bca7
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
While generating Visual Studio 2015 solution files for a project using
the subdirs template qmake writes out both the header for version 2015
and version 2013. The problem is a case fall-through.
Task-number: QTBUG-48110
Change-Id: Ib6ddc1ceb306be9b3098d7b7c66a8ffabbd86481
Reviewed-by: J-P Nurmi <jpnurmi@theqtcompany.com>
Reviewed-by: Andrew Knight <andrew.knight@intopalo.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Valid characters are (A-Z,a-z,0-9,-,.).
It is unlikely that we will see anything more exotic
than '_' in bundle/library names, go ahead and replace
that character only.
Task-number: QTBUG-46824
Change-Id: Ia97b7cd6247f40a970b4919363ffb66fb347186c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
unlike everywhere else in this file, destdir is not pre-quoted here.
Task-number: QTBUG-47775
Change-Id: Ia5b0c56bbdd3eb095f81b0f615d68a338ffa52c5
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
- ApplicationTypeRevision has been updated to 10.0 in the final VS2015
release
- For Universal App project one needs to specify
WindowsTargetPlatformVersion and WindowsTargetPlatformMinVersion
- Disable adding Qt libraries to the DeploymentFiles variable for
Universal Apps. Before an error occurred during build as windeployqt
asked to package the very same files. However, windeployqt also takes
care of plugins and hence we prefer to rely on windeployqt and disable
the link step parsing.
Change-Id: I5180519cabde60dbc7786ef27a6fbe0ef2ac44f3
Reviewed-by: Andrew Knight <andrew.knight@intopalo.com>
The SDK Version has been updated, hence include and lib directories were
wrong. Luckily, Microsoft introduced an environment variable in the
final VS2015 release to identify the location. Also has the benefit to
reduce hardcoded paths.
Change-Id: I9726db031d87d119bc7326154b24554c4b685d57
Reviewed-by: Andrew Knight <andrew.knight@intopalo.com>
Reviewed-by: Mika Lindqvist <postmaster@raasu.org>
Instead of going to qmake to generate the makefile that we want, we write
the makefile directly and include it from the generated makefile. This
leaves us with a single top level makefile for handling exclusive builds
through xcodebuild, and covers all the various build configurations in
a unified manner. It also allows for improved test device handling.
Change-Id: I66851f181ac4da2c8938645e0aa95ffa0fee33c7
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Add a link to the topic that lists all Qt modules with links to
their documentation.
Change-Id: I0f488ea8c2f3479c7bace6ffbdbb7a70324c1649
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
SDKs generated from VS2013 use a different folder for
build settings than those generated from VS2012.
Check both folders, before rejecting a potential
SDK.
Change-Id: I5bee5cc3771352adaab07d39ebbc350618f6c573
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
... by marking the ctors (if any) explicit and the
function-call operator const.
Change-Id: Ia65fbad0dfdccbb31d630a5501c4d6f0f5aa3623
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
They are already held in QVector.
Change-Id: Ib1266956c860ecd4671501ab12ab932a8ce9b7d6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Conflicts:
src/plugins/platforms/cocoa/qcocoafiledialoghelper.h
Manually fixed src/testlib/qtestcase.cpp to return the right type.
Change-Id: Id1634dbe3d73fefe9431b9f5378846cb187624e4
Visual Studio 2015 integrates the Windows Runtime development
tools, including the msvc2013 compilers.
This patch fixes the error that mspdb120.dll is missing.
It is typically included through PATH variable of the shell,
which points to the "wrong" location in this case.
Change-Id: I46289721912d6b517c6083612582f67536d28b11
Reviewed-by: Andrew Knight <andrew.knight@intopalo.com>
When PRECOMPILED_HEADER is set to foo/bar/stable.h and
PRECOMPILED_SOURCE is empty, then a C++ file foo/bar/stable.cpp
is generated that contains the include "stable.h".
We must pass the exact string "stable.h" to the /Yc compile
switch instead of "foo/bar/stable.h".
Commit dc612acdc6 introduced this
regression to allow to have PRECOMPILED_SOURCE in a different
directory than PRECOMPILED_HEADER.
Change-Id: I1a7e096c0455b946a5660d23c70c72abd4c7ac1b
Task-number: QTBUG-46679
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
With Xcode7, Apple added support for compiling apps to bit code
instead of binary (*). But this is only supported when the deployment
target is at least 6.0. And in Qt-5.5, the deployment target is
still set to 5.1.1. The result is that every Qt application will fail
building once people move to Xcode7.
Instead of bumping the deployment target (which we plan to do
for Qt-5.6), we choose to switch off bit code for now.
*: https://developer.apple.com/library/prerelease/ios/documentation/IDEs/Conceptual/AppDistributionGuide/AppThinning/AppThinning.html
Change-Id: I23001563439a7726506b7cd2dc77a82533b8a27b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Deprecate the qmake variable DEPLOYMENT that was used for installing
files on remote devices for Windows RT and Windows CE Visual Studio
projects. Use INSTALLS for both nmake and Visual Studio projects.
[ChangeLog][core][qmake] Deprecated the qmake variable DEPLOYMENT in
favor of INSTALLS.
Task-number: QTBUG-21854
Change-Id: Ia9d2c69feb7d87b0b9dc69ff7c0a68be35a57acd
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
qmake win32 generators by default used values of DEFINES for RC
preprocessor defines, too. For simple defines this works. For
string literals this failed for the .vcxproj files:
DEFINES += "FOO=\"BAR BAR\"" works for CL but fails for RC.
DEFINES += "FOO=\\\"BAR BAR\\\"" works for RC but fails for CL.
This patch introduces the qmake variable RC_DEFINES. The variable
contains the preprocessor defines, that are used for RC. If the
varible is not set, the DEFINES values are used for RC.
Task-number: QTBUG-44184
Change-Id: I4202271759d29de8c1829347ae3ef117eda54b38
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
they are self-contained, as they are the result of another project's
full resolution. consequently, recursing them just burns cycles, and
additionally introduces the risk of an endless loop if the file is
botched.
Task-number: QTBUG-12711
Change-Id: I401ee691c170092cc61fe05538cec4272ed8f922
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
we use qmake properties in the installed .prl files, so the paths
need to be converted to native separators before emission.
Task-number: QTBUG-46217
Change-Id: If3fb0a84488795478fc2a701271c931c62eba6aa
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
... by implementing a fake ln in qmake.
symlinks are supported only since vista (we officially still support
xp), and even there are permission-restricted (MS being (rightfully)
afraid of symlink attacks). so we fake the links by copying the files
instead.
the previous hack was a bit naive, simply using cp/copy instead of ln.
this didn't work with relative paths, as real symlinks are resolved
against their parent directory, not the working directory of the "ln"
command. the new fake does this correctly.
Change-Id: Ia2f5d68a39d6ffcc8a4383f9d0fc63a9da0a05c3
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
This allows creation of applications for
- x86
- x64
- arm
While the arm build theoretically also allows to launch on
a mobile, it currently asserts on runtime. Either we will
create a new mkspec for Windows 10 Mobile in the future,
or do runtime checks for the environment. That also depends
on whether there will be a separate SDK by Microsoft.
Change-Id: I510bfc88410a5b5a1eb7c37f7f43888d1e5dda0d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Reviewed-by: Andrew Knight <andrew.knight@intopalo.com>
Like application bundles on OSX, the plugin bundle has its Info.plist
in the Contents directory.
Change-Id: I216fa79857924beb0e9c5fcc4a8d06b197a3f383
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
since commit 22edeb3f4 (private; anno 2002), the generator would extract
-prebind and translate it into a PREBINDING property in the pbx file.
the writeout to the pbx file got lost in the rewrite for Xcode 3.2
(commit 66f6e5b1; anno 2012).
this isn't particularly bad, as prebinding is obsolete since OS X 10.3.4.
we now go the last mile and remove the handling of the flag. that means
that remaining projects which still use it (meaninglessly) will get a
warning from Xcode, which is kinda what we want.
QMAKE_LFLAGS should have never been part of the library iteration loop.
it was added there in the prebind handling commit, so we can get rid of
it again now.
Change-Id: Id7dee2b1e248bb2bd7aa7a3e66f82057921afffd
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
we need to do full shell quoting, not the limited whitespace quoting.
Task-number: QTBUG-46224
Change-Id: I41bc9aee556ca680dce0875b58159a31db962452
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
it obviously makes no sense to set up the loop if the container is empty.
as we now have that conditional anyway ...
Change-Id: I6d95c0102734852443c188012bfcb076d879581e
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
QMAKE_FRAMEWORK_VERSION has a fallback to VER_MAJ (which derives from
VERSION), so it's pretty much always set, thus defeating the previous
check.
amends 6cb495de.
Task-number: QTBUG-46215
Change-Id: I2c5560c469617ebeab978e4de78df00baf38d49d
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
this makes it possible to use these functions without an evaluator.
Change-Id: I23e4ec141b427f4c3c8b647305532be179058c07
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
the messages contain a trailing CRLF, which is not helpful.
Change-Id: I4a27115a191dc416a62e28a41f2a9c5893bdc64b
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
the i/o functions are not very consistent about having the dot already
in the message. the windows api does, and qt passes this on.
Change-Id: I2d1a213965e15478985d6eff205689ea44aa2a03
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
a single quote must not disrupt a double quoted string and vice-versa.
Change-Id: Ibb277bc1c930a7dbe9199ca572507ababbcfae4c
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
also adds documentation, which is kind of a sanity test. ehm.
Change-Id: I6b520e8b505a2bfbb1e376fa72be0f140227a3a4
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reduce the size of .text section in QtCore by 4.5KB and in QtNetwork
by 26.5KB.
Change-Id: If7998776166b9681c1e4b24c51d40444aa996d7a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Currently, the Xcode generator uses "sourceTree = <absolute>" for
all PBXFileReferences. But the paths we use for referencing
libraries are relative. This patch will change this, so that we
always use absolute paths to be consequent.
This will fix a crash in Xcode that happens when opening
projects generated by Qt.
Change-Id: I3a372b93598a777c96ba353205cf19710a5923f5
Task-number: QTBUG-45966
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
ProjectBuilderMakefileGenerator::openOutput should only change back
Option::output_dir when creating a pbx file inside an Xcode project.
Since the pbx file will be placed inside a different directory than
output_dir when creating an Xcode project, MakefileGenerator::openOutput()
will redirect output_dir to be inside the Xcode project as well. Since
we don't want this redirection, we change output_dir back to what it
was once the call returns. But we should only do this when creating
the whole Xcode project, since only then we create a pbx file that
is different from output_dir in the first place.
A bug with this is seen when making qt_makeqmake.mak (which is a
helper makefile inside the Xcode project). That file will only
regenerate the pbx file (and not the whole Xcode project), which
means that we don't enter the fileName.isEmpty() section, which
means that output_dir should stay as it is.
Task-number: QTBUG-45826
Change-Id: I03d5c3dec395ff4768f9272fd1981c6fd35efb1e
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
don't try to install the primary target, as it obviously doesn't exist.
however, we must not disarm bundle installation.
Change-Id: I3074150f749220d77c1210a4978e71aff9c9a3a9
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
QMAKE_BUNDLE_DATA itself does as well, and it can refer to versioned
resources.
Change-Id: I3d9bf23c2ff81dbb1cd929f3f0e0ce1e67f3258a
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Remove a superfluous implementation of
VcprojGenerator::replaceExtraCompilerVariables.
The implementation in the base class is exactly the same.
Use that instead.
Change-Id: Ie7d995be1b0d55fbefd15ae6b7a992237d97839c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
this makes the distclean targets work throughout qt.
the dreaded confclean target is aliased to distclean.
Task-number: QTBUG-8202
Task-number: QTBUG-20566
Change-Id: I7ac8e3b5b0110825dc93e4fa885281db91c6cf83
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
this affects only files explicitly listed via the .clean member without
placeholders, so more or less a corner case.
Change-Id: I7bd55948130aaee116d1a4bebbad0c445b76197b
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
it helps enormously to put spaces between target names ...
Task-number: QTBUG-45533
Change-Id: Ic41f8287c6c37761b1be3ad7c383b5c7fb714b12
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
people may use extra compilers which refer to CXXFLAGS & co., so set
them up "as normal".
Change-Id: I858ca63370a7aed66e04f5417da078b896feefc4
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Evaluate the .output variable of the extra compiler to determine
the file extension of its output.
The VS project generator needs it to determine the filter that
will contain the output file.
Change-Id: Iab1e154a712342401e17421c08975fad13967a5b
Task-number: QTBUG-45717
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
instead of allowing arbitrary input and output base paths, restrict them
to the project input and output dirs (in any permutation), which are the
only cases ever used anyway.
this permits much clearer call sites, and allows later optimizations.
Change-Id: I48d149a4417af5c858e66ec57c476a5bc6b17f17
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
explicitly use the correct directories instead of temporarily changing
into the output dir. this makes the code less obfuscated.
Change-Id: Ia935987f486151ae556910703cc20945c7610ffc
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
turns out that a relative path makes some versions of Xcode crash.
so use an absolute path again.
fileFixify() has been fixed for shadow builds to make this possible.
This reverts commit 6ccf0a326e.
Task-number: QTBUG-45424
Change-Id: Ica87c6c29f990f56e42c399b6d9b1c7eacdd13a7
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
... instead of sheepishly assuming qmake_pwd().
it also canonicalizes consistently with the relative output path now.
Change-Id: I86231f7259179020643405f3c0e696a74031aa4e
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
it would trigger only if the input file name was already absolute,
matched the native path separator, and some (likely) other conditions.
as this behavior was almost unpredictable, it would be not very useful.
so save ourselves the headache and just remove it.
Change-Id: Ic457f487f6d0ce9f7a5f192859c9efa9c2de2b63
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Make sure we don't pass by value, but by const reference.
Change-Id: Ia432e881d2b8116f22a30dfa31186479784ee4a1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
CESDKHandler now retrieves available WEC2013 SDKs from the registry and
assembles a working build environment.
Change-Id: Ifa70f53aca9d1bf2fadf178a331f46c1efca90ff
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
The qmake documentation was missing details about when rc files
are autogenerated under Windows.
A new section about windows rc files is added in
"Platform Notes".
Some hints are added in section VERSION.
Link to new "Platform Notes" section is added.
The VERSION example is extended, too.
Link to new "Platform Notes" section is added to RC_ICONS as
this is a rc file generator trigger, too.
The section "Building an Application" gets a link to the
"Platform Notes" and the system variable list was shortened
by all entries relevant to windows only rc files.
Many links to VERSION were not resolved by qdoc. Adds
explicit linkage.
Change-Id: Iacbc34d53a6bafa6e7658aaee8c751f32e978177
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Visual Studio copies all files to be deployed into the MSIL directory
and then invokes MDILXapCompile on it, which checks for managed code and
translates it into native code. The problem is that all entries of the
package will be copied into the MSIL directly, losing the subdirectory
structure (for instance for plugins). Hence we recreate the directory
structure manually by invoking windeployqt a second time.
Task-number: QTBUG-41753
Change-Id: I3d99cbc531bbe883f87b45de37ba71d93472c042
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
The msvc_nmake and msvc_vcproj generators deduced the exe/dll header
version number from the VERSION variable in a "bizarre" way:
VERSION=1.2.3.4567 was converted to /VERSION:1.234567.
But a minor number beyond 65535 is not accepted by the linker.
This fix deduces the major and minor from the major and minor of
VERSION: VERSION=1.2.3.4567 leads to /VERSION:1.2.
In addition, a new variable is introduced: VERSION_PE_HEADER.
With this variable, legacy pro files that rely on the bizarre
behavior can re-create it:
VERSION=1.2.3.45 and VERSION_PE_HEADER=1.2345 lead to the old
result: /VERSION:1.2345 by just taking the VERSION_PE_HEADER to
overrule the new behavior.
Task-number: QTBUG-44823
Change-Id: Ie093ade83290c098fe2b2a429ce5d6ed6dc750ea
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
QT_INSTALL_LIBS is not the right place to check for Qt dlls, as they
cannot be found there in a non-developer build. In order to be able
to find the dlls and make adding dll locations easier for the user,
QMAKE_DLLS_PATHS was added. On Windows, the variable points to Qt's
bin directory by default.
Task-number: QTBUG-44960
Change-Id: Ie4e5beeaadee798a055599387e842d7c0502c27a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Will be active when running test apps through Xcode's 'test' action,
and reports QtTestLib test objects and functions to Xcode as XCTest
cases.
This allows running tests on both iOS Simulator and iOS devices from
the command line, through xcodebuild, without relying on any 3rd party
tools. It also integrates Qt test failures and passes into the Xcode
IDE, which may be useful for closer investigation of test failures.
The feature is limited to Xcode 6.x.
Change-Id: I33d39edbabdbaebef48d2d0eb7e08a1ffb72c397
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Files in DISTFILES are placed into a "Distribution Files"
folder under the project node.
Task-number: QTBUG-43162
Change-Id: Ib75aacf1010d9ea63af89d4a9cc92275d714b3cb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
0c7241cc contains the wrong identifier for device capabilities. This has
been updated in a previous commit, but documentation was not properly
updated.
Task-number: QTBUG-45098
Change-Id: I300a2ea19ebdf8a1aaed492a1bdf24b9af2bd60a
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@theqtcompany.com>
Reviewed-by: Andrew Knight <qt@panimo.net>
17d690952b missed a few instances that should have showEnvVarsInLog = 0.
Change-Id: I8f1106426447670b0057aeb421efc09bf117e969
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
In de5553aa, qmake was fixed to resolve QMAKE_INFO_PLIST based on the
current pwd to fix QTBUG-21267. This fix was lost as part of 8c138054
in 5.4.
This fixes the error:
"WARNING: Could not resolve Info.plist ..."
when using qmake for shadow builds on OS X.
[ChangeLog][qmake][OS X/iOS] Fixed QMAKE_INFO_PLIST path resolution
for shadow builds
Change-Id: Icb42b2b3a44856f9b9a86a008081a3353951640d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
MSVC creates .lib file when ever dll with exports is built. Remove
this file too in distclean target.
Task-number: QTBUG-44685
Change-Id: I84ecb57626926b5bce06a200ff2b705fd2117686
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Xcode has a setting for script phases to filter out the environment
variables, so we don't need to use grep.
Change-Id: Ica1c64321385ab3e3b47cf6f8f4d4191bd963540
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@theqtcompany.com>
it makes no sense to let every spec do that separately, as it's fixed
by the generator+shell.
putting it into a file which is loaded regardless of the spec also
allows us to remove the hardcoded fallbacks from qmake.
if somebody overrode the values in their spec for some weird reasons,
they'll need to override spec_post.prf.
shell-{unix,win32}.conf are now dummies and print warnings.
Task-number: QTBUG-37269
Change-Id: I66c24fb4072ce4d63fdbfc57618daa2a48fa1d80
Reviewed-by: Jochen Seemann <seemann.jochen@gmail.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
A scheme is required to be able to run tests through Xcode, even from the
command line, but Xcode doesn't auto-generate the schemes until launched
as an application. Xcode also auto-generates schemes for all our targets,
but we only need one for the primary application target.
Change-Id: Ia42f3825aba3ffde3be93be55e165d6284434853
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
ecf6e34efefcedbff0a457ed4b5e0f4e5d096b37 introduced new values to
specify icons in the manifest.
Change-Id: I8f0cc9790ffd2f50ed2008bc8bab053b3db4965e
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@theqtcompany.com>
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
it doesn't make a whole lot of sense, but it's possible to create
braced blocks which have no semantic meaning.
Change-Id: Id55dfdee1aa3fade507cbd1eb34bdffcd7eb6bff
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
we now warn about the pointless ones, and error out in cases that
already were semantically bogus.
Change-Id: Ifd80014af0fc53e3cc42561c4270d1dca234568f
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
a colon after else/for is non-AND-ing, i.e., it's no logical operator,
but "punctuation". therefore, putting an operator into the token stream
is bogus. it didn't hurt execution, so it went unnoticed, but it still
wasted some bytes and cpu cycles.
Change-Id: If5578074257feed299bda1630bf0dfe72eb395ae
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
they come always in pairs (with one exception).
Change-Id: Ia2f69a8776bd7146ff2fb18d13cc6bb5b2c71139
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
they have been semi-warnings for a long enough time now.
Change-Id: I3fffd63f7b44b30d2dc18cdcd74221c10e98399d
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
without that, both the lines
cond1 { cond2: VAR = val }
and
cond1 { cond2: else: cond3 }
would yield two bogus errors: first an excess brace, and then a missing
one.
Change-Id: I8609106c1ad387577deec2077e2ce13507ac4d3f
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
we are transforming "magic" function calls into other structures. past
that point it's wrong to keep the function argument list terminator in
the token stream. this went unnoticed, because in this context it was
equivalent with the expected value list terminator (which was simply
never reached).
Change-Id: I3dc6719273ce9d663db867f355eba682ba6ccf2c
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
we strip the path a few lines above already.
Change-Id: If7524b8e744d2f1ab2f5a6920097d25671449829
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
it's easy when it is a simple list of files (or just absent). however,
it can also contain expandos, and in this case it's definitely not a
good idea to treat it partly (but not really) as a single shell command.
Change-Id: I7ef32a56f276b06579fc7094357c5f7612eaf205
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
first replaceExtraCompilerVariables(..., NoShell), then fix the final result.
Change-Id: If8cebeaa59f48d91b33b5a74e6a48a0d2d049643
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
it makes no sense to call it on paths that are fixified right before or
after, as fileFixify() calls it itself.
and verifyExtraCompiler() calls normalizePath() on its file argument.
Change-Id: I8fb21e129fd29428d1855de73483087842bc1bdd
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
in most cases, it actually means normalizePath() (because the file name is
used with qt i/o functions afterwards).
this affects QMakeLocalFile::local() as well, so many not immediately
obvious places are affected as well.
there was also one case of fixPathToTargetOS() falling into this category.
this is mostly a no-op, as the qt functions are agnostic to the path
separator.
in some other cases (in particular in the vcproj generator), it actually
means fixPathToTargetOS().
this is mostly a no-op as well, as the two functions are equal except on
msys anyway.
in the <meta file>FileName() functions, the use of a fixPath*() function
is bogus in the first place - fileFixify() already does
fixPathToTargetOS(), and this is correct when the file name is used
verbatim in a make command (which it is). otherwise it's irrelevant.
Change-Id: I26712da8f888c704f8b7f42dbe24c941b6ad031d
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
there is no reason why there should be unexpected leading or trailing
whitespace in an extra compiler's .depends list.
Change-Id: I46be75063180131e135fc6eea0238a482073618a
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
instead of quoting more or less random variable contents early,
consistently quote everything only right before it is needed. this way
we can be sure that everything is correctly quoted, but not over-quoted.
this removed the need for the insanity that unescapeFilePath() and
similar ad-hoc contraptions were.
this had the somewhat counter-intuitive effect that it was possible to
remove escapeFilePath() calls from PBX::writeSettings() calls - these
were actually only unescaping.
[ChangeLog][qmake][Important Behavior Changes] A lot of quoting issues
have been fixed. As a side effect, qmake has become more sensitive to
over-quoted file names in project files.
(*) ok, maybe not. close enough.
Task-number: fatal: out of memory
Change-Id: I8c51cfffb59ccd156b46bd5c56754c480667443a
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
fixing and escaping is now a tri-state option:
- none (this removes the need to unescape the result right afterwards in
some cases)
- local shell (for system())
- target shell (for Makefile)
Change-Id: I5b78d9b70630fe4484dc964eff5f62793da35764
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Use of FileFixifyAbsolute with non-default in_dir and out_dir
is not defined (and produces bogus results).
Using FileFixifyRelative when handling QMAKE_BUNDLE_DATA as a relative
path is fine.
Change-Id: I49902dc9f5b8029d092a4419c0cff5483e419c30
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Change-Id: I503e4e4c50a147cc1d81019228593f502132f28a
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Commit 8ee2e497 introduced a regression for CONFIG-=flat vcxproj files.
Files with custom build steps (e.g. foo.h with Q_OBJECT) were written
into top-level filters ("Header Files" instead of
"Header Files\my\sub\dir").
The assumption that the parameter filtername always equals
VCFilter::name was wrong.
Change-Id: Id5178550310d06b73e42f18597a27012ddd89bb7
Task-number: QTBUG-44413
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
We already have saved this information in the loop above.
Change-Id: Ic0e0a66b01e9ee001932d7d798d848abc746ef95
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Commit 4f21eb03 broke the generation of non-flat vcxprojs.
XTreeNode passes filter names to outputFileConfigs that have
the source subdirectory suffixed (e.g. "Generated Files\subdir").
Function filterByName must be called with the substring before the
backslash.
Change-Id: Ic259e6316ab0727828773b13e0d8ad0cc7f0808f
Task-number: QTBUG-41746
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
This reverts commit e5a8134765.
A much simpler fix for QTBUG-41746 is about to follow.
Change-Id: I1eea1785e00b4d7d470108d8dc3272a2af438ef4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The VS integration does not exist anymore and has been replaced by
the Qt VS Add-in years ago.
Change-Id: I0202b0b2909318ed8869a738ec87b507c4c746af
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@theqtcompany.com>
Qt copyrights are now in The Qt Company, so we could update the source
code headers accordingly. In the same go we should also fix the links to
point to qt.io.
Outdated header.LGPL removed (use header.LGPL21 instead)
Old header.LGPL3 renamed to header.LGPL3-COMM to match actual licensing
combination. New header.LGPL-COMM taken in the use file which were
using old header.LGPL3 (src/plugins/platforms/android/extract.cpp)
Added new header.LGPL3 containing Commercial + LGPLv3 + GPLv2 license
combination
Change-Id: I6f49b819a8a20cc4f88b794a8f6726d975e8ffbe
Reviewed-by: Matti Paaso <matti.paaso@theqtcompany.com>
qmake seems to be adding current date/time to the .la files for no
reason, so let's stop do that.
This way, two invocations of qmake actually gives bit for bit similar
output of .la files.
Change-Id: I93c7c4075cc1e05214849eec8629f41ce01e5914
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
these reflect the on-target paths (unlike /raw, which are host paths, just
without the -sysroot). this is necessary for anything deployment-related,
starting with RPATH.
Change-Id: I13d598995d0e4d6cb0dc1fc7938b8631cf3e3a95
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
it makes no sense to test for OBJECTS_DIR emptiness when we are going to
use DESTDIR instead.
Change-Id: I0f7115fc8a9fe2a996417d5f50bd0165773129fa
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
that makes no sense at all. and OBJECTS_DIR is not resolved, either.
Change-Id: Ie76b9de6bb11ae42945255f2e168943066d2f60d
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
... as newer versions of nmake (and jom, for compatibility) have botched
circumflex processing (they simply don't do it when shortcutting the shell
evaluation).
as a side effect, the output is also more readable if the string contains
quotes.
Change-Id: I0506b59ceecb70da258c482f9973156b2803066d
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
double quotes cause mingw32-make to switch from direct execution to going
through the shell, so avoid them.
Change-Id: I05b71a050e425a1b327f747fab01755ff528ba0b
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
MakefileGenerator::init() fixifies the variable, so there is no point in
the windows generator adjusting path separators as well.
Change-Id: I9331631125ee16ce4d64e38153f3c67f2f78b16b
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
this is admittedly a rather improbable use case, so unlikely to have any
real world effect.
Change-Id: If98f0de90043525f0555f8ddf98f8b4352e5a0a7
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
it always returned true nowadays.
an obvious followup effect is that the return value of parsedProBlock()
doesn't need to be null-checked any more as well.
Change-Id: I782785cab9b721a78a342a010921a73e642ebe7f
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
... because it also fixes the path, and we'll need the "plain" name later.
Change-Id: I86da8f53e44a68005c413c4b78b1b1682746e22e
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
we (supposedly) fully support QMAKE_EXTRA_COMPILERS, so there is no need
for any special casing here.
Change-Id: I4e9d389320a3e5ad0acbf73823ff1e6f7b9c370f
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
it's debugging code which is used only once (if even uncommented).
Change-Id: Ie57347017dd24f4acecff2a7132f82898dea3122
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
more efficient use of string functions.
Change-Id: I3d95d6379eaab025b18449b706f93631a2132aad
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
the path is processed, and afterwards fixForOutput()ed again. the first
call makes no sense (even if it registered some variables that are gone
in the second call, that would be pointless exactly because they are gone).
Change-Id: I251f1e4858bec36f3a7a9427c2ba78031b35a2d3
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
commands come already fully expanded and quoted from the project.
Change-Id: I239d5c305f5f65d32c832bc09bfd1c322051e149
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
no other generator does it. if it actually buys anything, it should be
re-instantiated differently.
Change-Id: I8431702ac7d558d65fd28a7f9e36bb49db2eb253
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
the logic was such that if the bundle name already had the specified
extension which was not the default extension, the default extension
would be appended, too. i don't think that was the intention ...
now we simply put the default into QMAKE_BUNDLE_EXTENSION if its empty -
the variable is not used anywhere else where it would be expected to
preserve its emptiness, so this is safe.
Change-Id: Ied34d10f9fe60756bddc0037dcb2f1d3bbfd3e12
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
