The documentation states that if you have a range of
0.00-2.00 with the number of decimals set to 2 then
any number up to 9.99 would be considered intermediate.
This is because the number of digits still matches both before
and after the decimal point. If it is 10.0 or 9.999 then
it is still considered invalid.
In the case of 9.999 being invalid in this case, the documentation
is corrected as this was incorrectly indicated as Intermediate,
as the code indicates it as Invalid.
Change-Id: I07b433e856f355916a1240deafdf4ef58e680639
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
This static method can be called before QGuiApplication is created. At
that point there is yet no primary screen, so the implementation
needs to guard against dereferencing a nullptr.
Task-number: QTBUG-67309
Change-Id: I6b7b9e97b1c3c79bf2f9c6d6247c3b10f39f7a55
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
To read data from a named pipe, QWindowsPipeReader uses the ReadFileEx()
function which runs asynchronously. When reading is completed and the
thread is in an alertable wait state, the notified() callback is called
by the system, reporting a completion status of that operation. Then the
callback queues a readyRead signal and starts a new sequence. The latter
is skipped if the pipe is broken or the read buffer is full.
Thus, if an application does not run the event loop, the next call to
QWindowsPipeReader::waitForReadyRead() should emit the queued signal
and report true to the caller even if no new read operation was started.
Change-Id: I37102dbb1c00191d93365bfc2e94e743d9f3962a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
1. If a request was redirected or some error was encountered, we
try to reset the uploading byte-device.
2. Disconnecting from the byte-device is not enough, since we have a
queued connection, _q_uploadDataReadyRead() gets called even if
byte-device was deleted and thus sender() can return null -
we have to check this condition.
3. Update auto-test with a case where our server immediately
replies with a redirect status code.
Task-number: QTBUG-67469
Task-number: QTBUG-66913
Change-Id: I9b364cf3dee1717940ddbe50cba37c3398cc9c95
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This failed (occasionally) in finding the editor widget, so wait for the window
to be shown properly. Also enter the event loop with QTRY_VERIFY and not for a
fixed time of 1 s.
This however just moved the point of failure. Now the test fails since the
clearing and setting of focus does not dismiss the editor widget sometimes, so
still blacklist it.
Task-number: QTBUG-67282
Task-number: QTBUG-66216
Change-Id: Iec598609fce23a25d7b955082d0973685d612715
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Fix a mistaken #ifdef that should have been #if; and only call
QTimeZone::availableTimeZoneIds() once in transitionEachZone_data(),
while switching to use of a ranged-for.
Change-Id: Id27aae9ef450f21350283099c892ca7173884b94
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use QTRY_COMPARE instead of a wait followed by QCOMPARE. Unless the condition
doesn't change and the wait provides the opportunity for things to go wrong.
Task-number: QTBUG-63992
Change-Id: I13474a45f1f4df9d77a418729a5748235ae0dd1a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
For the time being, no more stretched QComboBox. They
were already looking bad before and nobody complained,
so it's a non-issue. In the future, we might use square
combo boxes in the same way as we do for push buttons
but for non-editable QComboBox only.
Removes what is now dead code, including some leftovers.
tst_QMacStyle updated to reflect size changes to accom-
modate the focus ring.
Change-Id: I60fac86b9acb52cc96373bca0b3cad598ec4f1e7
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
QTextDocumentWriter only supports a small subset of table formatting
when exporting to ODF-format. This patch adds more formatting
capabilities to the ODF exporter:
- table border support
- table alignment
- table width
- respect column constraints (column widths)
- add a tab before soft line breaks. This will avoid causing the last
line to stretch all over the cell in justified paragraphs.
With this patch, line height settings are now exported, too.
[ChangeLog][QtGui][QDocumentWriter] QDocumentWriter now supports table
borders, table alignment, table width, column widths, line height and
image resolution when exporting QTextDocuments to ODF files.
Task-number: QTBUG-63581
Change-Id: I2d269ef0f842e73af64d48bfef531d5fa3078088
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
When we load DER-encoded keys in the openssl-backend we always turn it
into PEM-encoded keys (essentially we prepend and append a header and
footer and use 'toBase64' on the DER data).
The problem comes from the header and footer which is simply chosen
based on which key algorithm was chosen by the user. Which would be
wrong when the key is a PKCS#8 key. This caused OpenSSL to fail when
trying to read it. Surprisingly it still loads correctly for unencrypted
keys with the wrong header, but not for encrypted keys.
This patch adds a small function which checks if a key is an encrypted
PKCS#8 key and then uses this function to figure out if a PKCS#8 header
and footer should be used (note that I only do this for encrypted PKCS#8
keys since, as previously mentioned, unencrypted keys are read correctly
by openssl).
The passphrase is now also passed to the QSslKeyPrivate::decodeDer
function so DER-encoded files can actually be decrypted.
[ChangeLog][QtNetwork][QSslKey] The openssl backend can now load
encrypted PKCS#8 DER-encoded keys.
Task-number: QTBUG-17718
Change-Id: I52eedf19bde297c9aa7fb050e835b3fc0db724e2
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Properly handle single protocol TLS configurations. Previously,
due to the use of generic (non version-specific) client/server method
they worked as ranges of protocols instead. This also fixes a couple
of previously broken tests.
Task-number: QTBUG-67584
Change-Id: Ied23113a4fab6b407a34c953e3bd33eab153bb67
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This reduces the timeout from 10 seconds to the default 5, but the tested events
(resize events, painting) seem like something that should happen in 5 seconds.
Change-Id: I1d12372f37264bf7be64096e43813cd03f567102
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
BuiltIn inputs shouldnt be translated into a code input. We comment the
input line for this variables
Change-Id: I3b7d2fd06afc6a122d90a999fc5a5246fc93234e
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
The cost for the pixmap cache was calculated in bytes but
setCacheLimit() takes the size in kilobytes. This lead to the
situation that all values above 2097152 overflowed and disabled
the caching completely. Fix it by calculating the cost in
kilobytes as it is done in QGLContext.
Task-number: QTBUG-45293
Change-Id: Ib8dc2360c8f3201ce0b615a04c38b5ccaa8fc6cf
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Add functions for converting QImage to HBITMAP and back
supporting additional formats of QImage (RGB888, RGB555,
Indexed8 and Mono). Add test with roundtrip to tst_qimage similar
to tst_QPixmap::toWinHBITMAP().
Task-number: QTBUG-51124
Change-Id: Ib568898e7162686bfa527d828785628eb0b78e21
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
It's useful when you need to check how long a hash will be without first
generating one.
[ChangeLog][QtCore][QCryptographicHash] Add a static method, hashLength,
which returns the length of the output of a hash function in bytes.
Change-Id: Id6a454016523de83d157fd95c50105c6db4bb1d9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The test was failing because the files it expected to create were not actually
visible on the disk.
This was because 189e9c93d7 made QTemporaryFile
use unnamed files if the file name is not actually requested. Fix by forcing the
temporary file to be made with the requested name.
CI has not caught this because the test executable is marked insignificant_test
on Linux.
Change-Id: Ibe0244fdfcc66acf3be4314da51b4c0b3b520b71
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Except RHEL-6.6 and 7.4
It was blacklisted in f3939d943e, along
with a lot of other entries. No specifics are known about why it was
blacklisted originally, but now it only fails on RHEL because they
use OpenSSL 1.0.1.
Change-Id: I6d1d1b7b7bf5386b2115b8780163550cf03bbad7
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
On Wayland, manipulating the clipboard requires an input event serial, which is
not possible to get unless the compositor sends us input events.
Change-Id: If5231a5db85f8d6ad988ea93f240cee0c3466f9f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This makes the tests pass on Wayland compositors that don't automatically give
focus to newly created windows. Such as a headless Weston, which is very useful
for testing.
Task-number: QTBUG-66846
Change-Id: I502504b333499c89be193a3ebc19d41264a13580
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
Instead of an unconditional wait.
The QSKIP is necessary because the PDF format is non-native and the Windows
implementation of QPrintDialog doesn't work then.
The macOS implementation has the same warning, so add the check for that OS
as well.
The test has previously passed, since it hasn't seen not actually opening the
dialog as an issue.
Change-Id: Ib53e378b232580358f13e0c5206404412f9e6ee2
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This is a long overdue change so we don't break ADL of operator|.
I think will not break source or binary compatibility.
The problem is code like this:
namespace Foo {
struct MyStruct;
MyStruct operator|(MyStruct, MyStruct);
void someFunction() {
fooLabel->setAlignement(Qt::AlignLeft | Qt::AlignTop)
}
}
This would be an error before as ADL would find only the Foo::operator| and not
the global one since the arguments are not in the global namespace.
After this change, ADL works fine and this code compiles
This bites people with misterious error, see questions on
https://stackoverflow.com/questions/10755058/qflags-enum-type-conversion-fails-all-of-a-suddenhttps://stackoverflow.com/questions/39919142/broken-bitwise-or-operator-in-a-qt-project
[ChangeLog][QtCore] QFlags's operator| for enum types in the Qt namespace are
now declared in the Qt namespace itself.
Change-Id: I021bce11ec1521b4d8795a2cf3084a0be1960804
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The TZ database has recently revised its ccount of when they skipped a
day to cross the international date line, from skipping Jan 1st 1995
to skipping December 31st 1994. So Move the before-days check to
December 30th; and correct the Feb 2nd that was meant to be Jan 2nd
(and does need to remain so, for compatibility with systems with out
of date data).
Task-number: QTBUG-67497
Change-Id: I5b9483c553205817f995f91793662a5a85e03192
Reviewed-by: Liang Qi <liang.qi@qt.io>
OCIBindByPos2 is only needed when using execBatch(), binding data that
is longer than USHRT_MAX works for exec() so this is left unchanged.
Change-Id: Ifdcf91939d184f225d24c13052ea0b81611ecf91
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
There is no need to qWait() before a QTRY_VERIFY. qWait() will also
intermittently handle events while waiting, so calling it in a loop isn't
necessary.
Change-Id: Ica7fbf18c03e673213dd9b72f31f71937cdcb145
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The Q_ASSERT(mimePrivate.fromCache) at qmimedatabase.cpp:218
which I added in commit 7a5644d648, was being triggered when calling comment()
for invalid mimetypes such as db.mimeTypeForName("").
Change-Id: I8037041a4b435d2a5ba24ec94b7858e38b2f0bf2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If the db isn't valid, then that's the actual issue, not the fact that we're
getting the same invalid db (with the same driver QSqlNullDriver) in
multiple threads.
Change-Id: I95490818ed78e741c3823e115f139c2cff01b0b1
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Also use data-driven test to reduce duplication.
Change-Id: I9516e52267cb3c7b239030fd73dbbf23ac8f52f7
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This makes an irreversible global change: tests that do it will mess
with other tests. So make sure they're all last. This required
splitting up one test; and revealed another that secretly depended on
being run with C as default locale.
Task-number: QTBUG-67276
Change-Id: Ic24ef48b2c9bd5c37c1f11260b437628019624ca
Reviewed-by: Kari Oikarinen <kari.oikarinen@qt.io>
The test creates client and server sockets with mismatching protocol versions,
trying different combinations, for example: 1) server (TLS 1.0) vs
client (TLS 1.2) or 2) server (TLS 1.2) vs client (TLS 1.1), etc.
Since TLS v < 1.2 does not support signature algorithms, they are ignored
and handshake is always successful. But our new OpenSSL 1.1 backend uses
generic TLS_client_method and TLS_server_method when creating SSL_CTX.
This means, both server and client will support TLS v. 1.2, they
will have no shared signature algorithms, thus handshake will fail
with an error string similar to this:
"tls1_set_server_sigalgs:no shared signature algorithms".
For OpenSSL 1.1 this test makes no sense.
Task-number: QTBUG-67456
Change-Id: Ibb2a12eea5e5c0ebaeee7d0719cc721ecf4763e6
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Do not let a global qtlogging.ini interfere with an autotest.
This works around an issue on Ubuntu 17.10
Task-number: QTBUG-67385
Change-Id: I0d02835eb7a561b43fe0b98f4383c170c6d51303
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joni Jäntti <joni.jantti@qt.io>
As setting cursor position is not allowed on Wayland.
Task-number: QTBUG-66824
Change-Id: I1f065b7072dff13b1ee8a4fc3ccec347e8d71ed1
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Pier Luigi Fiorini <pierluigi.fiorini@liri.io>
Uses the scripts and tests we already have for lancelot as a painting
benchmark.
Change-Id: Idf8a55e2261162e619f6dbb567dc19f8dc96da4e
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Instead use QSignalSpy to wait directly for the expected events.
Change-Id: I319302ea7177fe690b5d885347c505454904518e
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Erik Verbruggen <erik.verbruggen@qt.io>
