The rc file is in the same directory as the manifest file.
Therefore the include must consist of the filename and must not include
the file's path.
Change-Id: I4f5ac11b131f39ea8c425aca93fcf82d150c0204
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
By putting object_with_source into CONFIG one could force qmake to
output each object file into the same directory as its source file
came from. This was a rather nasty work-around from Qt 3 times to
support source files with the same file name in a project.
Unfortunately this doesn't play nicely with shadow builds.
Change-Id: Ie79e14d36ba6eac4219edc14ea75ab6a96f9ea96
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
we cannot just completely stub it out, as then there are no dependencies
on whatever targets we actually *want* to be built.
Change-Id: I32a92fa937d099c153a0082feae5d23e3998ba48
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
it works better when it castrates the app template, rather than staticlib
Change-Id: If52960fb48d770e8ec096c66b579539512b8d299
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
When embedding manifests we modified the EXE/DLL after linking using
the manifest tool. This breaks the incremental linking feature of MSVC.
The MS way to embed a manifest without breaking incremental linking is:
- let the linker create the manifest file,
- create a resource that contains the manifest file,
- invoke the linker again to embed the resource.
The embed_manifest_{exe|dll}.prf files have been removed.
All manifest logic is now in qmake's nmake makefile generator.
With QMAKE_MANIFEST one can specify a custom manifest file that gets
embedded without disturbing incremental linking.
Task-number: QTBUG-22718
Change-Id: Idb9d2644a0577b2002cbdd2d62b695b9171b1bd5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
instead of re-assembling a list from the variables, take the original
command line minus some explicitly stripped out options. this is way
less code and poses no synchronization problem between the two parts.
as a "side effect", variables obtained from $QMAKEFLAGS won't multiply
with each makefile nesting level, as the generated command line won't
replicate data obtained from the environment.
Change-Id: I5d1ce0f11efb338f60405529f9818910103b1b0e
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
it wouldn't do anything particularly useful when parsing QMAKEFLAGS, so
take it out of the common path.
Change-Id: I60f1215c4645707e1f99932dd19160e1d1c9d953
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this adds a .base "member" to the install "structure". if specified, only
this much is stripped from the front of each element of .files, rather
than the entire path, to obtain the target filename.
Change-Id: Ic39fcf71c4ad874ffabbbad113be9cdc6e3f7260
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
don't make a single string, but a string list which is join()ed in the end.
this is a tad slower, but the code is way easier to work with.
Change-Id: I1ff7168c2770998761a6081be8080c743ddc94a1
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
make a proper stringlist of commands, and join it in reverse order
only at the end. the reversal ensures that we can cleanly fold up
directory hierarchies we may build.
Change-Id: I9a241361588a6965283aec5258e1d622b35514e0
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Microsoft has named their new Visual Studio again
after the old naming schema.
Change-Id: Ib1b971807fa89d90b10892a2d78570058e564f3a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Nicolas Arnaud-Cormos <nicolas@kdab.com>
The files were grouped into the relevant filters but the filters
themselves were not added. This now ensures the filters are added to the
vcxproj files so they appear grouped correctly.
Task-number: QTBUG-26755
Change-Id: I7d2c6fa96dcbb0496fd9d1bb1d01e7dd660052f4
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
otherwise the second installation on unix would be bogus.
Change-Id: I162533ee262c6820e7e2d4710b5342cafecd9d59
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
we just determined that the file does not exist, so it's entirely
pointless to query its type from the file system. consequently, the
respective fallback branch would assume a regular file anyway.
Change-Id: I42590ffc2a5f650fb430a9398cb1859217ed4350
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the value is still re-processed numerous times, end each "exit path"
does own escaping, while not every path can deal with an escaped path.
Change-Id: I0bf4a043809bf4b7877d02e5d8dfe8f794a7dd00
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
QDir::relativeFilePath() doesn't do anything if the path is already
relative, so make it absolute first to force a re-calculation.
the cleanPath() is gone, as relativeFilePath() already does that.
Change-Id: I8f4d0d839db3fe99a608f70916b4b5bd52c56535
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
qmake -project was always outputting a project with subdirs template, because
Option::h_moc_mod was not being properly read, causing addFile() to misbehave.
Change-Id: I2c07aea132f9885eabf188de993b0fabfb352886
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
the paths may be explicitly added before some other paths, so it would
be wrong to remove them.
Change-Id: I68ae93fd307afe14a07a0f24de952783950b5bea
Reviewed-by: Holger Freyther <holger+qt@freyther.de>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Remove references to an old compiler that has not been
supported for a long time. Also remove Borland specific
configuration flags which have no meaning elsewhere.
Change-Id: I3634a52b78f737ea972073e14c2b6669dcd0ae63
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
sam added this based on a vague notion of backwards compatibility when
he fixed the function to use the local scope, but it kind of makes no
sense - there is very little reason for accessing the global scope from
within a function. google doesn't find any relevant hits except our
source code, so let's just nuke it.
Change-Id: Ie957bb47b531f7e9b5dfcceb4e09f65dd826b422
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
there is no reason why private libs should not have prls resolved.
the two variables are resolved independently, so it's possible that
(even more) libraries will appear duplicated on the linker command line,
but that seems easiest for the time being.
Change-Id: I9070ba53808a0661fa72949db8111106b7aca487
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the visitor-pattern like approach is not needed any more
Change-Id: I990db681cbeee91d89ecba97745a8104595247e7
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
it's more elegant, and more similar code is better.
Change-Id: I2b8b036cb70a932fd171e23cf7d3389188401924
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
it wouldn't actually *do* anything, as l is not a reference. i cannot
figure out the original intention, so let's just drop it.
Change-Id: Ic0a3457a1872cde827259ee5530959120456e934
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the unix and windows variants don't rely on it.
not making it purely virtual only because the project generator inherits
MakefileGenerator as well but does not need an implementation.
Change-Id: I80099b3f5d07cd037b408cf1099c58ff3a2904cd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
i see no reason why they should deviate
Change-Id: Iaa0445b79a95d348f51df74a74c7c89216c468ec
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
given that nobody noticed so far how broken this was, this doesn't
appear to be a particularly common path. but anyway ...
Change-Id: Ic17b239d724a4d69ff414a24be2e8588732bc8dd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the code wouldn't actually *do* anything with them, because it was
completely broken. didn't seem to hurt, so just remove it.
we still need to parse -framework, though, so we don't do funny things
with its possible argument.
Change-Id: Ia3266538612d3314a72f4965ee9c1ea2d3046ac9
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the system path separator and shell are bound to the host system
(system() will use cmd even on mingw with sh.exe in path).
the makefiles otoh may depend on what the qmakespec defines.
consequently, add $$system_path() and $$system_quote() (for use with
system() & $$system()). $$native_path() is renamed to $$shell_path() and
should be used with $$shell_quote() to produce command lines in
makefiles.
$$QMAKE_DIR_SEP needs to be applied to Option::dir_sep right after
parsing the spec, so it is available to $$shell_{path,quote}().
Change-Id: If3db4849e7f96068cf03a32348a24f3a72d6292c
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
dealing with the directories separately doesn't buy us anything. it's
easier to mix them into the libs, as that contains some paths, too, both
in projects and in prl files.
this brings the windows generators in line with the unix ones.
Change-Id: I1f58f7edd8e21d28bfabf04384bac2e315aaf446
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
there doesn't appear to be a point in having the function virtual; the
part in the mingw generator can be inlined somewhere else just fine.
Change-Id: I50d66d505095b43fce601928c6240a684389a4b7
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
they are not re-implemented anywhere
Change-Id: I444a967bb39ec6b5994747c9fa3f605b4c53ce4f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
merge their content as early as possible into QMAKE_LIBS. that's where
they ultimately end up anyway, and this approach is way simpler.
QMAKE_FRAMEWORKPATH_FLAGS is also used for the compiler flags, so it
remains as such in this second function.
Change-Id: Idc3ba4a9b2569fce3252d5f5ddc3f6ebf93650cf
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
findLibraries() now consistently expands to the linker-specific syntax,
and processPrlFiles() expects that syntax.
Change-Id: Ifd7b51d01378c91d6f2b132aca33629f21ca72f9
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Use XOR instead of OR in order to avoid saturating all bits when computing the
hash value.
Change-Id: I50b1a044eb827239dae1c04732ca6a065f6233b4
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
yet another symbian remnant (building windows arm executables for the
simulator).
This reverts commit 5c88141ed0b25d8ab9318bf4cb5dda54b90b2ce1.
Change-Id: I6eb147c0e2710eba09a4339fa4a08a5b08f8dab3
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
unlike for the unix linker, this does not matter for the windows linker,
but keeping it consistent has advantages.
Change-Id: Ib9b9efa18c31d87c026d3cac5a8737f4612ad1c0
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
libraries and related flags have no business in that variable, by
definition.
Change-Id: Ic958a3e082a498945ab56bc12ec05d4083ee43a5
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
this way QMAKE_LIBS{,_PRIVATE} can be treated the same as in all other
generators, which allows us to:
- make the windows generators' findLibraries() be more like the unix
version
- dispose of QMAKE_INTERNAL_PRL_LIBS handling while reading prl files
(because the output always goes to QMAKE_LIBS)
- as a side effect, QMAKE_LIBS_PRIVATE are not subjected to prl file
resolution any more, which is again consistent with unix - the
correctness of that needs to be assessed separately.
Change-Id: Ie9bc04d117eff6a7cde846677f98acf3c64aa6ee
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
the function was already called long before. if it really needs to be
called again, it's a) probably affecting the other windows generators as
well and b) the actual problem should be fixed instead.
This reverts commit d50c3c6624b2343e42d0df4b72212d9ced8f3682.
Change-Id: Iaa2007640fbc9acdc50ba3b0681efeb0d184f224
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
the libinfix provides a way cleaner solution to that. i don't expect it
to be still actually used anyway.
Change-Id: I051522ec3abb3d92c529b5462b8514a706aa2ba1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
it's a tad insane to expect the user to do that
Change-Id: I75c68f2a28656c9ba2e3fabcc79718b899b29ce7
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
qtAddModule() skips adding standard library paths to LIBS. however, as
processPrlFiles() didn't know anything about that, it would not find the
prl files of qt libraries in these paths.
so centralize the definition of these default paths (we should actually
ask the linker for them) and use it in both places.
do the same for the include paths for symmetry.
Change-Id: I7e3692dc2d1c2d0c97a9151d15887b1263de137a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
XQMakeSpec is not available after configure
but the QMakeSpec contains the correct value
Change-Id: I6cd4da8b0d6c95565f31842c17611ffd361bc010
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
it produces way too many false positives to be useful.
Change-Id: Iefa423f96fa5574267b1468abb5efc8454ab54a3
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
i have no idea why that was done (the commit message says "not sure why
it works elsewhere"), but it makes no sense whatsoever, specifically
doing it only on mingw. probably some workaround, as usual. the
de-duplication is broken by design anyway.
This reverts commit 7a6302c2baf6861fdaf65992b71a7676859860c2.
Change-Id: I6edecaa062570e59eccd24d50919ba132e65a403
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
this makes it unnecessary to dump qmakespec to .qmake.cache and
qmodule.pri.
Task-number: QTBUG-22700
Change-Id: I678c7ee7df2512184b9cd06d7a3be8bbd0b0da15
Reviewed-by: Orgad Shaneh <orgads@gmail.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Don't hardcode the "qt_config" EXTRA variable and use QMAKE_PKGCONFIG_VARIABLES instead.
This allows qmake create the .pc files that are unrelated to Qt.
Change-Id: Ic72005e8819a15f6c50f3aaf79424a247fba20af
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This has been deprecated in Qt 4.8.0. Use X.files instead.
Task-number: QTBUG-3216
Task-number: QTBUG-25106
Change-Id: I581321591291118a13403e92da5997497e12c3fd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
we would ignore the early read variables and fail to export the super
cache's path to the project.
Change-Id: I3c467802b4af22f73be05b25dbd8ccb6196d28a8
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
refactoring and cleanup. fixes x-builds between different os families.
Conflicts:
mkspecs/features/qt.prf
Change-Id: I0205e6f07f77c9b015cf055dd87a471883949a91
QT_NODLL is replaced by QT_STATIC, but the latter is implied if
QT_BOOTSTRAPPED is already defined. Therefore, simply remove the
QT_NODLL definitions.
Change-Id: Iac7ec0b494b7a78197c25d59547f45eaf92d7465
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
this function is not meant to be used for debug statements
Change-Id: I84575e64814e2c9fd2e09c33fc680d0e6648f4ea
Reviewed-by: Rolland Dudemaine <rolland@ghs.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
the rationale is mostly the same as in 568e714fdf, plus the additional
point that the qmake version didn't change for a decade.
fallback paths for version 2.01a properties are provided.
Change-Id: I3d3f16595eca9eca71c78fda9dbaf53da9f874a9
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
the feature was implemented for the abld/sbs2 generators only, and is
of course undocumented.
this reverts most of commit e795e61ef93f8080f9938ac49f2fca306644af85.
Change-Id: Ibd1726b036ce6c45f8e678ea996218f774f8aed2
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
it was used only for determining the path separator, so do that
directly.
the -macx option went bye bye, as it is redundant with -unix now.
Change-Id: Ib8344c042db56e05af75d263447311d4b43a3bf0
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
instead of having a bunch of nested loops, collect into a temporary list
and process it at the end.
Change-Id: I97e5642f7e13f7c7b69eae00833e61cdf46a02ed
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
the as-we-go dump is sufficient (and usually necessary to actually find
the problem). if only the summary is interesting, the -E option can be
used now.
Change-Id: I9e34c6db9dcb99b38013c4d0cb80b8cb88ca36b5
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
instead of dumping the variables as we are going, dump everything at the
end. this is potentially useful, as opposed to the previous
functionality which was redundant with -d.
Change-Id: Icf14703cb93e03f7079dfc0266b219ad9c902133
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
values() and variables() get both const and non-const overloads
Change-Id: Idfabea1acc488bf78f24edb831681ee07f0074c4
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
the weird debugging feature is not used anyway
Change-Id: I07f481a94f2b2ab2a5b61270f0e00183cefd4cd1
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
we can rely on only user code needing variable mapping, so apply it only
in the evaluator.
Change-Id: I6fc58e7bcf24cf0fa8783d5341ab1e7b9f001c88
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the only place where the two remaining magic values need to be
referencable is doVariableReplaceExpand(), so make a separate function
and use it only in that place.
Change-Id: I6e2fcfa3a4f16727d90ace56eb88fc99ef272ffc
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
like the other variables, we can just store it in the hash.
Change-Id: I49ad39dca8d498119b27f16ea4bdc44ae698d72e
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this changes the semantics a bit - it will be the datetime of qmake
startup rather than the time a particular file is processed. i'd argue
that this is insignificant.
Change-Id: I75918967bef25038ce54aa81ab03c027384c0268
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
it suggests a symmetry to $$OUT_PWD which simply isn't there. the
shorter alias $$PWD is much more popular anyway.
Change-Id: Iefbfd56f1a3e526f15c9d6cd1bf59778be6f2f8d
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
$$_PRO_FILE_, $$_PRO_FILE_PWD_ and $$OUT_PWD can be cleanly initialized.
no need for magic.
Change-Id: I2e339d17bae42ecb573c2f82c716f6be15a35b98
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
instead of resolving them on-demand, just initialize the value hash
with them. less magic and faster.
Change-Id: I28cb6c21ae6ae60a33734f62acdef0794420ba8f
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this is a purely internal variable. projects are supposed to
query $$TEMPLATE only.
Change-Id: I32a3aa7012a4fedcf6e77e2e1302ed978baac700
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this is cleaner by design and allows removing some hacks.
Change-Id: I3270195b5d62caa476ffde7c1e1ef43cec99c565
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
these are not actually used inside qmake since ever the code was factored
into moc.prf.
Change-Id: I545f4857ca3f0b4bf2439703700069ac67ad4ca2
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
it's really only a host setting which is not used any more past the now
removed assignment.
Change-Id: I62c61c893697eb9a7e7be550311bf152d5a8206e
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
get the actual spec path directly from the project - the specs in Option
are not necessarily resolved.
Change-Id: Ia2bf2199c5269aa5b5a9d4c38de36171f25d448b
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
doesn't make much of a difference on unix (as the default specs are just
symlinks).
on windows, it makes the gross hack used for finding spec-specific wince
default_post.prfs unnecessary.
Change-Id: Id403dce5be487e1ae22c1f54b8095a6afdd98bc8
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this is cleaner than resolving it on-demand, as it avoids statics (with
potential side effects on dynamic spec switching).
Change-Id: I2bc15a4c3108376e1b4a01351875fe0c445ee5d5
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
it's completely counterproductive. just include() the file instead.
i don't think anyone knew about this "feature", so just removing it.
as a side effect this removes the repeated existence check of already
found feature files, as we can use a clean else-if cascade.
Change-Id: I5d38d38d0a897f2e8857ac68d5649fd4367941c4
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the project evaluator becomes oblivious of the target mode.
the mode is set up in spec_post.prf according to the spec.
$$QMAKE_TARGET contains the feature suffixes to search, and is also
contained in $$CONFIG.
the target_mode variable itself becomes private to the Makefile class.
Change-Id: I3c06d9dab536b753343cec6c5c491d3203e50bd8
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
these are read before the qmakespec and before the cache, resp.
this will allow moving some hard-wired logic out of qmake.
Change-Id: I6a63050d7798bc30a4add8c009bcd801a29a0deb
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this should significantly cut down the time wasted looking for files in
non-existing directories, in particular on windows.
Change-Id: I7ab3523fe8c028e3787ebc78e4543ab04f53448e
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this limits references to this variable to its setup and explicit cache
manipulation.
Change-Id: I88dd2418051501abea201f223da7759a15f1c249
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
it wasn't really wired, so the only effect it had was disabling the unix
scopes (despite an attempt to override that in the spec, which probably
worked before qt 4.6, and will start working again soon).
Change-Id: I95daff75b508edaf83a8a06fd327350acd62b124
Reviewed-by: Rolland Dudemaine <rolland@ghs.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
(some of) the generators are (moderately) x-platform, so it makes no
sense to nail the host platform to a generator (and thus a spec).
overriding the host platform is only a debugging mesasure anyway, so one
can use the (now undocumented) -unix/-macx/-win32 options for that.
Change-Id: If2a059f1feeb2c726e5838625ede1c7add829985
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
they have been deprecated long enough, so we can mess with them now.
don't make them set the target mode any more; the makespec can do that
autoritatively. instead, they can be used to override the host mode for
debugging purposes.
Change-Id: Ife5fdcf4f1b6b926901a80896ac92b7d821278d1
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the only callers which used non-default arguments are gone now, so remove
the arguments entirely. this also enables us to re-enable result caching.
Change-Id: I62f76e17e531a4eeafddb9b29716ca0a0eb3dbea
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the specs in Option are now only fixifiable absolute paths if an actual
path was passed on the command line - otherwise these are just names,
and we should pass them on verbatim.
Change-Id: I5b3535dadf2d6b2b3116331e6636f6e363a5361f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
if source and build dir are direct children of the common root and we
are shadowing the top-level source dir, there is of course no trailing
slash to match.
Change-Id: I8a34a6a72d16cb21d77d056e037235af9b32a008
Reviewed-by: Davide Pesavento <davidepesa@gmail.com>
Reviewed-by: Andreas Hartmetz <ahartmetz@gmail.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The return type of isActiveConfig is a boolean, so return that when
host_build is queried.
Change-Id: I6d1420b49b09e51442c4b2d482e2f19b165081d8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Integrated the checksdk tool into qmake and made
the makefiles selfcontained, so configure make, is now
enough to build qt for wince
Change-Id: I29076702eca2ec23d4d06bb3d5c5cef9d4f95161
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
instead of making the "real" targets depend on the makefiles, add
conditional makefile generation to the targets themselves.
this causes makefile generation to follow the recursion order determined
by the project, which is important when dealing with prl and module pri
files.
a side effect of this is that qmake and make calls are interleaved now,
which is entirely different from a 'qmake -r' run.
on the downside, calling make with multiple targets which operate on the
same subprojects without prior makefile generation will make a mess, as
the qmake calls will be racing. this should be no problem, as qmake does
not generate recursive targets where this would be useful - at least by
default.
it is not sufficient to just order the creation of the makefiles
non-recursively (e.g., by using gnu-specific order-only-prerequisites),
as an interrupted and subsequently resumed build would happily skip the
nested makefiles.
workable alternative approaches would be walking the entire tree in a
pre-pass to ensure makefile presence (which is incredibly slow) or
creating additional stamp files only after recursing and having the
makefiles depend on them (which is ugly).
Task-number: QTBUG-23376
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Change-Id: I88d3e7610215677d362026de316513d3bea04b06
instead of hard-coding platform differences, use a variable.
Change-Id: I20e98811ad5f07429148c6f88aedbabc3ba58fff
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
everything in the projects should be normalized. only the makefile
generators need to adjust it to the native form.
Change-Id: I06a4e997f32134d13949ec4a9dd1b44367aab7cb
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
no point in entering the outdir and leaving the indir.
this doesn't really matter except for the obsolete borland generator,
but whatever.
Change-Id: Ieb4e4c549ebd65f99e4d00819c52822968b060a4
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the code above already deals with the differences
Change-Id: Ifb799e46f5187e7bd3d0f0169e868ad267bcfe23
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
no need to define an obscure variable for it. just inline it.
the assignments are left in for compatibility with hand-written commands.
Change-Id: I9bc3914e2c4116f3b8fe00a421ca0f036bb7e214
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
so far it would rebuild the makefiles one level down only, which is
somewhat arbitrary and not really helpful.
Change-Id: I5fe01f379ecc4b210610a674d7df7dfc18131eef
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
that's consistent with other projects. 'qmake_all' can be used for
recursion.
Change-Id: Ie6d620f7a3e0e28d3f2f82f01ca94c2f46137c68
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
$(MAKEFILE) is our own file, and using it would wreak havoc if it was
named anything but Makefile.
Change-Id: I51cae2014a85399b409f18788f864ff2a82e493e
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
if a "subdir" project added a project file from the same directory as
itself, "/." would be appended to the path, which is obviously not useful.
Change-Id: Ia733dedb57e568c5cf9a3d5eb29727176a5142c5
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
webkit does some unholy tricks with the ordering of qmake and make
invocations, so it does not work with qmake -r. to make it still
possible to integrate it into the qt5 aggregator project, give it a
chance to "break out" from the recursion.
Change-Id: I926836e44c0e0790cdd90e6b0c8f766dccc33c4d
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
otherwise a cache/config in an aggregator project may unduly hide the
mkspecs/ of the aggregated project from qmake's view.
Change-Id: Idb0b124de071822f8f55463d9f8a4d194ef3130e
qmake will now look for .qmake.super, just like it looks for .qmake.cache,
and the cache() function has a mode to write this super cache.
this allows the creation of aggregator projects like, say, qt5.
a notable difference to the normal cache is that this file is *not* added
as a dependency of the Makefile. this means that modifications done by
later sub-projects will not cause a re-processing of earlier projects, and
consequently that one should be cautious regarding what information to
store there.
another notable difference is that this file is read *before* the spec,
so the spec can use the variables from the cache without resorting to
$$fromfile() & co.
Change-Id: I4807b6d34014261fa9eebd6f0ae128b802d86691
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this is the source dir equivalent of .qmake.cache and can be checked
into the repository. it can be used to make project-wide settings, or
just to signal the presence of an mkspecs/ directory.
Change-Id: I5f1cebad2aa2a89e78089341b2051613b6b7a613
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this allows the creation of aggregator projects, like, say, qt5.
this is not expected to have a negative impact, as no project could
reasonably expect a nested .qmake.cache to *not* take effect - in fact,
if the project was processed stand-alone, it would already use it.
Change-Id: I33f2935d309baba7e95465f2fefb8231c4f03eda
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
don't even complain about trying to use js-based feature files. we have
been doing that for long enough.
Change-Id: Ib58ec204322442c488e8d780989f26b1e32595ed
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
properties are now split into a write location $$[FOO] and a read
location $$[FOO/get]. the write locations are hard-coded and configurable
via qt.conf/Paths as before, while the read locations are configured via
qt.conf/EffectivePaths.
this finally provides a clean solution to the problem that during the qt
build itself tools and libraries need to be taken from somewhere else
than they are installed to.
Change-Id: I956c43bd082afd465e690fe75d0bee3c2c0f7c25
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
make_first really means the same, as the default target is 'first'
which immediately invokes make_first.
as a nice side effect, this fixes ALL_DEPS not being used by the subdirs
template's default target - make_default wasn't special-cased in the
right place, while make_first is.
Change-Id: I946cea3b2dae198eda61d31dbd19c6ccd15deac7
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
returns the list with the order of the elements reversed.
one can easily implement this with existing functions, but this is way
faster and more readable.
Change-Id: I12d306eb9fe58fc332622274ea6b658192529491
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
to be used in system() calls and when assembling EXTRA_COMPILER and
INSTALLS .commands by hand.
Change-Id: Id706cd56aa267a9fb4b14e3416692b4716fafa5b
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
just exposes QDir::fooFilePath() wrapped into QDir::cleanPath()
Change-Id: I7a7644084825fd8092a9910ac20f695c4d9351f6
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
more or less QDir::toNativeSeparators(QDir::cleanPath())
Change-Id: I52deee1e8086559eda5833b387a0cf64d21cbcd9
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
return the build directory corresponding to a given source directory.
this is the identity function if not shadow-building. if input lies
outside the source directory, return empty value.
Change-Id: I2d2a6b1112bd19989fe29cfe19a12d39a0d208c1
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
this quotes the elements of a variable in a way suitable for re-parsing
as qmake code.
Change-Id: I0e6ea2478c43b5aeff45f485a48ac8c86705dd4a
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
this simply returns the keys of all variables in the context.
Change-Id: I0092f827744fcd257dfb9e7ca664c87c6f1cc763
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this is equivalent to unix "touch --no-create --reference <ref> <file>".
QFile has no setLastModified() (even though QFileInfo has
lastModified()), so the implementation is low-level.
Change-Id: I6783e8f2613e168ad0c24e79e7384d5b2e4901ee
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
this dumps the contents of a variable into a file. each element of the
variable is considered a line; line terminators are added. all missing
directories are automatically created.
Change-Id: Idafeb873cea64e6705c894b3ab0ef21df69e7170
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
this function adds the current contents of the named variable to the
cache. this comprises populating base_vars and appending an assignment
to .qmake.cache. if no cache file exists yet, it will be created in the
current output directory (and inherited by subdirs projects). if called
without a variable name, only create the cache file if missing.
Change-Id: I1e81c2238aa6a5817a6ebbfb022e2b995c349363
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
this bypasses the otherwise done insane word splitting
Change-Id: Ia9b8980bc0770de3999544a06d239f55fb34f801
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
don't mess with the qmake cmdline args any more.
Change-Id: I399d87145d31d25e29951b6acd96387a3c7282f0
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
when qmake runs into the new option(host_build) command, it will restart
the project evaluation with a host spec.
the new default host spec is called default-host (gasp!). it is
overridden with the pre-exising -spec / -platform option, while the new
-xspec / -xplatform option overrides the pre-existing default spec.
specifying -spec but not -xspec will set the xspec, too, so the behavior
is backwards-compatible. same for the XQMAKESPEC override read from
.qmake.cache and the environment variable.
the cleaner solution would be adding -hostspec, to be symmetrical with
the override semantics, but that would deviate from configure in turn.
Change-Id: I4297c873780af16ab7928421b434ce0f1d3820da
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
... and followup fixes.
this is not needed any more due to the breaking patch being reverted.
Change-Id: Ia3416fcc16ddece680efbd0322286a601879fa0a
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
We are now moving in the exact opposite direction.
This logically reverts commit 059200a44b.
Some adjustments were necessary to maintain the project root stuff.
Conflicts:
qmake/main.cpp
qmake/option.cpp
qmake/option.h
qmake/project.cpp
Change-Id: Ic14fa571cbbfe9ac159f92493e49741d70a87eff
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Since we only support XCode 3 and later, then all of the legacy code can
be safely removed.
Change-Id: I9be8555aaa62c716b2277c2b97f41aa02d27ef13
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This adds the Visual Studio 11 mkspec
and the corresponding changes to configure
and qmake makesystem.
Change-Id: I3a7e82a6f7f90aa0a94dedd493ebaa66bf100923
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Properly use from/toLocal8Bit when referring to user data, even file
names.
Change-Id: I8fc7afa2ea570f8b1b1eecf354f01d6dfe0883cb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
QRegExp matching methods modify the object, which we don't want to. In
particular, when we receive a QRegExp from the user or we store in a
context that might require thread-safety, make sure we make a copy
before using it.
QRegularExpression has no such shortcoming.
Task-number: QTBUG-25064
Change-Id: I6b2d2530238a7e04b44859664a2962f2f466ee30
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
219a688ac1 added the version extension
which only occurs on the DLL import library.
Change-Id: Ie913adf039d7f3a9aadf43f4af014289a8aeacbe
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Hib Eris <hib@hiberis.nl>
When creating the temporary project object,
Option::output_dir must be adjusted temporarily.
Task-number: QTBUG-22788
Change-Id: Ibf8897a46b63f48b9e33d7e2168b09e559cecec7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Since Windows Vista the resource language must be included to
make the version information visible in Windows Explorer.
Two new variables have been introduced:
RC_LANG (default: 1033) - resource language
RC_CODEPAGE (default: 1200) - resource codepage
Task-number: QTBUG-23218
Change-Id: I29e102d19501e3b7a43d5096fc4806bc38a4d846
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
For variables that are supposed to contain a single int,
this method returns the numeric value.
Only the first value of the variable is taken into account.
Change-Id: Ifa11ba5ac044e0a4703a387a9bcf02043e4681d8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
If VC++ 2010 Express and VC# 2010 Express are installed, then the
installation path is written in two places into the registry.
We're now filtering detected installations with the same installation
path.
Task-number: QTBUG-24956
Change-Id: I401430e7aa81d96c523d8172d2a2e9d40ebdb3ce
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Algorithmic complexity attacks against hash tables have been known
since 2003 (cf. [1, 2]), and they have been left unpatched for years
until the 2011 attacks [3] against many libraries /
(reference) implementations of programming languages.
This patch adds a global integer, to be used as a seed for the hash
function itself. The seed is randomly initialized the first time a
QHash detaches from shared_null.
Right now the seed is not used at all -- another patch will modify
qHash to make use of it.
[1] http://www.cs.rice.edu/~scrosby/hash/CrosbyWallach_UsenixSec2003.pdf
[2] http://perldoc.perl.org/perlsec.html#Algorithmic-Complexity-Attacks
[3] http://www.ocert.org/advisories/ocert-2011-003.html
Task-number: QTBUG-23529
Change-Id: I7519e4c02b9c2794d1c14079b01330eb356e9c65
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This change will be needed during migration from QByteArrayData to
QArrayData.
Change-Id: I0c8d6f9ed3ef7c33af62736af55259a8f9a70c0f
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The nice side-effect of having Q_ASSERT use the condition twice is
that we break code that has side-effects.
Change-Id: Ia0b7ed2a8030c8e222612af95eb2d58671433110
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The only use of QUrl in qmake, moc, uic and rcc is due to QVariant's
internals, so let's disable it. This means those binaries are now
probably a lot smaller since the parsing and IDNA code don't need to
be present.
Change-Id: Ie156b0817d119b2ba5d3dcb9712a9fea2ee7d4a1
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
QStringBuilder will be enabled by default so qmake should build with it.
qstringbuiler.cpp has to be compiled in just for the convertFromAscii
(The alternative was to build with QT_NO_CAST_FROM_ASCII, but that would
be too much work)
Change-Id: I1fbeed7ed8a9d3bc38ef591a687c50644980e2fd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
this is a complete bastardization of the concept and breaks the (unused)
debugging feature to create proper unix makefiles under windows, but
apparently it permits cross-compiling unix targets under windows.
Change-Id: I4ee95a20e7d6a6b2063ec7aa22f52c1a97d78a77
Reviewed-by: Oliver Wolff <oliver.wolff@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Commit 8e5eb1bddc introduced the assumtion that mkspecs are
immediately below the mkspecs directory itself. This is not true for
e.g. unsupported/blackberry-armv7le-qcc.
This commit restores qmake's ability to find the "root" of the mkspecs
collection no matter how deeply the actual mkspecs are nested.
Task-number: QTBUG-24665
Change-Id: I98faaf8e6ae7b8524277aea6c17e685e507e37b3
Reviewed-by: Sean Harmer <sh@theharmers.co.uk>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
this makes the "sysrootable" properties more magic, with the raw
versions being omitted from the qmake -query output and automatically
falling back to the "cooked" variant if there is no sysroot set.
this makes the "normal" qmake -query less noisy. this will become even
more obvious when i add more "overloads" of the properties.
Change-Id: I08000986427264ec6238c8fe0a77f5cecdbf1201
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the feature is rather obscure and unlikely to be used by anyone.
Change-Id: I2dfb4ca4d5d1f210d385c013f46bc6389fd6ea2d
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
make is perfectly capable of doing shadow builds
Change-Id: I7e1c27cddc385b7a17ae5645b9cd26fa56d2f029
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
this was a somewhat magic support for sysroots, automatically rewriting
a number of path-holding variables. this was (as usual) completely
undocumented, extremely fragile, and we are coming up with something
better now anyway.
Change-Id: I045910f532cb3efc839ea81c7a48f8db695e4092
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
there is totally no reason to call it unless the project is actually
used for makefile generation, and the excessive calls actually mess up
things.
Change-Id: Idb7912a5404f6054010d2f29cce820a167de4f6f
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
the project build root can of course be empty - if there is neither an
mkspecs/ nor a .qmake.cache - or no project in the first place (-query).
Change-Id: I9595b0b4ad80a9086dcd48c9ae62b3e8bd1b6f2f
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
The -spec argument was interpreted as a relative directory as
soon as it contained a slash. Fix this by checking if the
directory exists before attempting to interpret it.
Change-Id: Ide8f0418abc719b0be582d2d72642a141f6c6dea
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This will be used later on as a base class for QTemporaryFile and
QSaveFile.
Change-Id: Ic2e1d232f95dc29b8e2f75e24a881ab459d3f037
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
clean up the somewhat convoluted code paths which forced re-evaluation.
now that the spec+cache are evaluated in a completely clean context
anyway, there is no point in re-evaluating them for build passes.
Change-Id: I12279083238e9ca7028af97f45e2638c8dc715b8
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
instead of initializing base_vars with the original's vars, initialize
vars itself. this has two consequences:
- there is no need to call read(0) to initialize vars
- one cannot usefully call the complex read() anymore, as that would
re-initialize vars from base_vars
this is much closer to an actual copy than the previous "seeding with
existing project".
Change-Id: Ib007bc5b779aedb680a27329aa578f7c604a4308
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
load()/include() with a target namespace would inherit the current
context. however, if you source a project with all bells and whistles,
this makes completely no sense and may be actually counterproductive.
infile()/$$fromfile() would have interited only the functions from the
current context. that was only a hack to support abusing them.
Change-Id: I2e992b923d9e5b0e5056001ca49b35de573abc63
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this is a hack from the times when these functions were (ab)used to
inspect proper project files, but the inclusion was done with a clean
project, so that the included files did not have any functions to work
with.
Change-Id: I19925e8ead597ca38df040000c183e368b32c06d
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
merge them into before_user_vars. they are evaluated right after another
anyway.
Change-Id: I11859284b363fee01233f6e20989444fef711d0d
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
don't inject the build pass specific variables into the project even
before evaluating the .spec file and the .qmake.cache. they are not
supposed to base configuration on that - feature files should do that
later.
the immediate advantage of this is that base_vars is never manipulated
upfront any more, which allows for cleaner setup paths. also, we can do
more caching of the spec+cache contents.
Change-Id: I19d7f8bec1fb7c3b54121e26794340b287055ebf
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
instead of messing with the Option singleton, add a way to inject
extra config values into QMakeProject.
Change-Id: Ia347dcc38af2c72913e30ebf5c2b4044f93b4f5f
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
this is a one-time operation which depends only on the invocation, so
this new home is much more appropriate.
Change-Id: I07c66d95a9ae01a664cec17564995311fb78ec9b
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
that way qtbase will find its spec without hacking .qmake.cache.
note that passing "-spec default" on the command line would have already
triggered the normal path, so artificial limitation did not even provide
safety against abuse (it is arguably pointless/counterproductive for
other projects than qtbase to have a default spec).
Change-Id: Ib0c3e6498fd70cd6f9561951d72a47165878bb33
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
nothing to be found in <sourcedir>/include.
neither in <builddir>/src/corelib/xml.
Change-Id: I381391a64542dc2ac7b421b6646c60a1b7a14639
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
makes the file a "tad" more concise
Change-Id: I81d9721942890659ac93b32f5988f9c005c88e87
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
the only difference is in the copy & del commands. the msys tools are
tolerant about windows paths, so this just works.
the in-makefile variant detection is stolen from tools/configure/.
Change-Id: Ia283c1fe2e2aaa8cd5b1dfd7ae29244115f07d65
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
instead of being a variable added to the makespec (via qconfig.pri),
QT_SYSROOT is now a property.
the QT_INSTALL_... properties are now automatically prefixed with the
sysroot; the raw values are available as QT_RAW_INSTALL_... - this is
expected to cause the least migration effort for existing projects.
-hostprefix and the new -hostbindir & -hostdatadir now feed the new
QT_HOST_... properties.
adapted the qmake feature files and the qtbase build system accordingly.
Change-Id: Iaa9b65bc10d9fe9c4988d620c70a8ce72177f8d4
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
that is, spec/../features/ (i.e., mkspecs/features/) - and not any
directory up to the root.
Change-Id: Ie5fdf2898fba5ac93583571edc24629471604798
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
make it table-driven and have it cache the immutable values from
QLibraryInfo.
Change-Id: I07ed89152aa964bc9edf4436ee7c42f99cc6bcd3
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
moving the detection of .qmake.cache to the qmake startup had the side
effect that a suddenly popping up cache would not be picked up by
nested projects any more.
this is not supposed to work in the first place, but the syncqt hack for
building against non-installed modules relies on it. until we have
cleaned that up properly, we need a way to notify qmake about the
appearance of the cache file.
Change-Id: I450646b936e3bb2ef2ed3aba05df58e521ccdc61
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
This adds support for XCode 4 into qmake and also indirectly fixes a
couple of problems that are relevant for XCode 3.2 too
Task-number: QTBUG-17247
Change-Id: I722470ad1854bd740cbbd28ff4956057a0e1906b
Reviewed-by: David Forstenlechner <dforsten@gmail.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
(cherry picked from commit b5871311457ca97816c0abbb8b935570bbfb657c)
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
there is no reason for doing that. there is even reason for *not* doing
it (the enums running out of sync).
Change-Id: Ieb7d015ca497a6675cc85da4c2e0af0c1533dd7a
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
This implements replacements for win32 makefile generators similar
to the replacement functionality in unix makefile generators.
To enable Makefile code generation for replacements in win32 makefile
generators, you must set QMAKE_STREAM_EDITOR to e.g. sed.
When building for win32, sed is normally only available in the
mingw/msys build environment and when cross compiling on unix.
In these cases QMAKE_STREAM_EDITOR is set to sed in qmake.conf.
For other win32 build environments QMAKE_STREAM_EDITOR is not set
in qmake.conf and the replacements Makefile code is not generated.
Change-Id: Ie5de5d517eafaeaa2544f1e972aec3fe11d0a6f1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
qmake would look for mkspecs/ in the directory containing the current
project file. this makes completely no sense with recursive projects:
a) nobody would make per-project specs and b) specs meant to be global
would not be found.
consequently, we look for a project root when starting qmake and use
only that directory.
if .qmake.cache is found/set, we assume that to be the project root.
otherwise, we search for mkspecs/ the same way we search for the cache -
just to up until we find one or hit the root. if we are shadow-building,
search the build dir as well.
Change-Id: Ie66b189a40c21203d956e681cbef44a89f98cd17
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
this is way more predictable than resolving it later.
Change-Id: I0ce27977b795bde9235e1d51d6f2d0d917f2398c
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this is a one-time operation which depends only on the invocation, so
this new home is much more appropriate.
Change-Id: I11ef30a8227afed06e58e64e65809dba25e81567
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
it's generally redundant with DataPath which we already look into.
this is consistent with where mkspecs are looked for.
i don't think anyone will notice this "loss" ...
Change-Id: Iab7c35cc22ba53e1005f26b5d85d41cf4dafad07
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
no point in saving the context when we are not actually modifying the
current context.
Change-Id: Id6f51a163e86bdf402aa0713737b655db68e7ee8
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
we already initialize it before parsing a project. if a project is daft
enough to clear TARGET, it does not deserve differently than breaking.
Change-Id: I6c727bc27d72a00e84b676ae3c169024bdb2d929
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
The QByteArray::operator const {char,void}*() implicit
conversions are a source of subtle bugs, so they right-
fully can be disabled with QT_NO_CAST_FROM_BYTEARRAY.
const char *d = qstring.toLatin1(); // implicit conversion
while ( d ) // oops: d points to freed memory
// ...
But almost no-one ever enabled this macros in the wild
and many were bitten by these implicit conversions, so
this patch deprecates them.
I would have liked to remove them completely, but there
are just too many occurrences even in Qt itself to hope
to find all conditionally-compiled code that uses these.
Also fixes all code that needs to compile under
QT_NO_DEPRECATED (in qmake/, src/tools/).
I984706452db7d0841620a0f64e179906123f3849 separately
deals with the bulk of changes in src/ and examples/.
Depends on I5ea1ad3c96d9e64167be53c0c418c7b7dba51f68.
Change-Id: I8d47e6c293c80f61c6288c9f8d42fda41afe2267
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The libName that is used in pkgConfig files should include the
TARGET_VERSION_EXT.
This is needed because in Win32MakefileGenerator::fixTargetExt(),
the TARGET_VERSION_EXT is added to the library name.
In Win32MakefileGenerator::processVars(), if TARGET_VERSION_EXT is empty,
it is set to VER_MAJ.
On platforms != Windows, TARGET_VERSION_EXT does not seem to be used.
We probably got away with this so far because pkgconfig files generation
for win32 was just added in 4.8 and nobody uses them yet, and because on
platforms != windows the TARGET_VERSION_EXT is not used.
Change-Id: I56f239e389f0ef926030e4c2376cadd92c4f673c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
base_vars["QMAKESPEC_ORIGINAL"] is not guaranteed to be set the first
time resolveSpec is called, since an include() can wipe it out. Change
it so that resolveSpec is called repeatedly until some
QMAKESPEC_ORIGINAL is set.
The code which attempted to remove all of the path up to the last / was
incorrect and must have been dead code (or its wrongness didn't matter)
until now.
Change-Id: I2b31ae10fc284ac7293c3cd95e5a2fd503ca7ab0
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
It was the result of miscoordination between Andreas Holzammer and me,
duplicating the functional change of commit
ea2c9f764f.
This reverts commit 8b7a9b4898.
Change-Id: I9a47746c1c12ca00b2dc5c5d50e99f9bf990e3f7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This abstraction imposed serious performance penalties and is being
dropped from the public API.
In particular, by allowing file names to be arbitrarily hijacked by
different file engines, and requiring engines to be instantiated in
order to decide, it imposed unnecessary overhead on all file operations.
Another flaw in the design with direct impact on performance is how
engines have no way to provide (or retain) additional information
obtained when querying the filesystem. In many places this has meant
repeated operations on the file system, where useful information is
immediately discarded to be queried again subsequently.
For Qt 4.8 a major refactoring of the code base took place to allow
bypassing the file-engine abstraction in select places, with
considerable performance gains observed. In Qt 5 it is expected we'll be
able to take this further, reaping even more benefits, but the
abstraction has to go.
[Dropping this now does not preclude that virtual file systems make an
appearance in Qt at a later point in Qt 5's lifecycle. Hopefully with a
new and improved abstraction.]
Forward declarations for QFileExtension(Result) were dropped, as the
classes were never used or defined.
Tests using "internalized" classes will only fully run on developer
builds. QFSFileEngine was removed altogether from exception safety test,
as it isn't its intent to test internal API.
Change-Id: Ie910e6c2628be202ea9e05366b091d6d529b246b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
resolve only once, in particular on unix.
Change-Id: I090698fc6029322a3a16d179d461af3e8336f6ad
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
there is no obvious reason why this should happen. if base_vars is used
again, the user configs will be parsed again, too.
Change-Id: Ib56e01a468cdb5e81d610bcaf0163bf730cbae05
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
-O2 triggers an optimizer bug where compiling unixmake*.cpp would take
several minutes each. -O1 is not measurably slower, so use that instead.
Change-Id: Ibf8abbecdd69e35cef800841f781543121168f76
Reviewed-by: Kai Koehne <kai.koehne@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this brings some clarity which combinations are actually possible, which
allows for some optimization later on.
Change-Id: I930027e426c5f9abea8d21eb1ebaa39bd29787b8
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Check the QT_OUTPUT_PATTERN environment variable in the default
message handler to customize the output of messages. Following
place holders are right now supported:
%{message}, %{type}, %{file}, %{line}, %{function}
The original cleanupFuncinfo was written by Thiago Macieira.
Change-Id: I6ad25baaa0e6a1c9f886105d2a93ef3310e512a9
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: David Faure <faure@kde.org>
This change is needed because msvc2010 tools have a '\' character at
the end of environment variable VCINSTALLDIR. This variable on msvc2008
does not have this '\' character at its end. Without this change
QMAKE_TARGET.arch on msvc2010 x64 evaluates to x86 instead of x86_64.
Task-number: QTBUG-22686
Change-Id: Ifba833e9361c97568b8b3de9976023e8537b208a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Disable optimization for getProjectUUID() as it triggers
ASSERT: "&other != this" at qstring.h:720 with -O2.
Change-Id: I51b31d4318ba9be187c186623099171d8f48235b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
qmake-generated Makefiles since 4.6 (according to bug report) contain
recursive qmake invocations with absolute paths to .pro files, where the
absolute paths are not escaped.
Task-number: QTBUG-11776
Change-Id: I49772c7d9147efea3bb7b9623c61d92aa0bb6857
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
As in the past, to avoid rewriting various autotests that contain
line-number information, an extra blank line has been inserted at the
end of the license text to ensure that this commit does not change the
total number of lines in the license header.
Change-Id: I311e001373776812699d6efc045b5f742890c689
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
When installing extra binaries the paths where not being escaped,
causing stripping and deleting to fail when dealing with filenames
that contained one or more spaces.
Change-Id: Iba4517b1110f6af30f7e2662cb86024a8b7b81f7
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Lincoln Ramsay <lincoln.ramsay@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
