The rcc generated code relies on global constructors to register the resources.
The object file of the generated code is included by default in shared libraries
and executables. However when the object file ends up in a static library, the
linker will discard the object file when nothing references any of the symbols
in that object file, when linking the static library into the executable/shared library.
The solution is to link the object file straight into the final target, by means of a
cmake object library.
Change-Id: I02ad1173e4f7e8f907022c906640dc9086233676
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Due to the missing argument processing on PUBLIC arguments we could
run into situations where the defines for an executable (mostly tests)
would be incorrectly processed.
If one were to pass a define into a test that also specifies public
libraries, the defines passed in by test would fall under the
PUBLIC_LIBRARIES argument in add_qt_executable.
For instance, in a test with DEFINES Foo PUBLIC_LIBRARIES Core
would cause arg_DEFINES to be "Foo=BAR;PUBLIC_LIBRARIES;Core". This
combined with the defines specified by add_qt_test would result
in the following string "Foo=BAR;PUBLIC_LIBRARIES;Core;TEST_DIR=..."
and would cause TEST_DIR to be treated as a public library in
add add_qt_executable.
For some reason I can't figure out, these two defines end up in the
linker flag section of certain test programs. There is nothing wrong
with the rest of the propagation chain into add_qt_executable. My best
guess is that it has something to do with the generators. In any case
add an explicit -D fixes the issue.
Change-Id: I340790c1c2426fa76785d1bd1b3332a904323d56
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
It has been decided, that going forward all qml files are to be added
to a module via the resource system. This patch does the ground work
to make sure all qml modules in the qt codebase follow these new
conventions.
New properties on targets have been added so that we can't track all the
qml related information for later use.
To make sure it is still possible to install qml files we added the
qt_install_qml_files() command.
Pro2cmake has been adjusted to handle the special cases of versioned
qml modules (e.g: QtQuick.2). It will now insert a TARGET_PATH
override to avoid the default conversion from the URI parameter.
Finally, this patch temporarliy disables the quick compiler by moving
all relevant code into a dummy function. This will be removed in a
follow up patch where the quick compiler will be enable for all
qml files present in resource files.
Change-Id: I09fe4517fad26ec96122d9c7c777dbfbd214905c
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This patch adds support for the qtquick compiler feature, which
will embed the compiled qml files as resources along with the
respective qml_loader.
This patch also changes the add_qml_module call to require either
EMBED_QML_FILES and/or INSTALL_QML_FILES to be specified.
Change-Id: I32d29c9b554b8286ed3b980027a56dd4abe11c92
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Make sure that the .qml/.js/.mjs files are copied or installed into
their target destination.
Change-Id: Ib1649e5168c9fe3a570800af92d82293e5b295d6
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
When cross-compiling qtdeclarative, add_qt_tools makes sure to import
the host tool and not build it. But there are also some
extend_target and add_qt_resource calls which try to extend the host
tool.
Make sure to protect those functions not to do anything if they are
called on an imported target.
Change-Id: Ifd8bcab8e56ad389a8c145382b23bd2c1bda5e81
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
After re-arranging subdirs, the cmake target level dependencies can
handle building qmlcachegen before running the custom command for
generating cache files.
Change-Id: I8a35b2b5bfd2fdf4b49462ff9c27e5f3075254fc
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Make sure to handle glob expressions in the entire path given, not just
the end of the path. This handles tests like qsslkey and qnetworkreply.
Also copy/install the testdata in the final test directory path under
a "testdata" subdir.
Previously INSTALL_TESTDIR was used, which was never set to anything.
Change-Id: I2408e12f586cadeb524ffa249e851a4179324b23
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
This patch adds support for qmake's qmlcache feature. It's enabled
when option EMBED_QML_FILES is not present in add_qml_module.
Change-Id: I9b35f0bda7dfaf777f55c14eaf3d763f9b550fa4
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Some projects in QtQuickControls force the qml files to embedded into
the binary. This change exposes an option to mimic that bevhavior.
Change-Id: I4cbf0c21c05ca03b8dd1189eb7d81e43279c7157
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Extend add_qt_test for qmltest by setting the option QMLTEST
when we detect the config qmltestcase.
We also forwards the GUI option to the tests when detected.
This is a requirement for some QtQuickControls2 tests.
Finally when doing a prefix build, we add the install directory
to the QT_PLUGIN_PATH environment variable.
Change-Id: I3b2ecb494955976e98abbcf3d03925c314336122
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Make sure that paths passed to qt_copy_or_install are prefixed with
QT_INSTALL_DIR so that they behave correctly with prefix and non-prefix
builds.
Make sure that plugin.qmltypes and qmldir are also copied to binary dir
when doing prefix builds to match qmake's behavior.
Change-Id: I6f87ed478e797c9f66dbf85264904ad29a60ad95
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
Some author warnings don't make sense when dealing with QML
plugins, like the messages regarding CLASS_NAME or not
belonging to a certain module. Take care not to print those
warnings in those cases.
Change-Id: I017bd63cca650dc262337949242e813b7b6a56cc
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reduce the amount of code required to add a qml plugin to cmake
by making add_qml_module wrap the add_qt_plugin code where required.
add_qml_module will also create a dummy target so that qml files
will appear as source files in an IDE when no cpp files are present.
CXX_MODULE qmake parameter has been dropped in favor of an
explicit IMPORT_VERSION parameter, since it was only used to
determine the version when the IMPORT_VERSION was not specified.
Change-Id: I4a4b626566720d04c62d246ca521db8c4a95b10f
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
These changes enable the support to handle test data and install or
package them as resources when appropriate.
This change does not handle the GENERATED_TESTDATA or
TEST_HELPER_INSTALLS since there are very few occurrences of these and
we can handle those as special cases.
Finally, in add_qt_test, only append CMAKE_CURRENT_SOURCE_DIR if
the path is not absolute.
Change-Id: Ic20b9749d10e2a09916f2797606116471c64850b
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Add the necessary code to both the QtBuild and pro2cmake to be able
to handle qml plugins in qt declarative.
Add condition replacement for QTDIR_build to QT_BUILDING_QT so that
certain qml examples work correctly when being built in the build
directory.
Fix add_qt_resources not being updated during build after changes
were made. Files list used as dependencies were not populated.
Add missing module mappings for qtdeclarative.
Change-Id: I0f71d0a3a0e7e97ba96807950d11cffaee04d9b2
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
f66c1db16c in qtbase introduced a new
macro that the moc scanner has to look for.
Set an explicit list of macros to look for in the
CMAKE_AUTOMOC_MACRO_NAMES property of every target that has AUTOMOC
enabled, otherwise CMake AUTOMOC won't run moc on files that contain
the new macro.
Change-Id: Id991a70d773cef66716621803a88e96b44a80650
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This is done by adding a DEFAULT_IF argument to add_qt_plugin, which accepts
if-evaluated expressions.
e.g.
add_qt_plugin(myplugin
DEFAULT_IF ${foo} STREQUAL ${bar}
...
)
so that this mechanism can be reused later if necessary.
Change-Id: I7eba9adaaa28e55a4f0f94cf206e868b990027e6
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Generate the ${MODULE}-android-dependencies.xml for the androiddeployqt
tool. This will ensure all the right plugins and dependencies are
packaged when generating the apk.
This change also changes the visibility for executable to default/public.
Not having this will cause the application to crash as we can't locate
main() in the executable (shared library).
Additionally pro2cmake conversion script has been updated to perform
the required conversions for the Android settings.
Finally, the 6 projects in QtBase that have Android dependencies have
been updated with the new script and the step that produces the xml
files in run at the end in QtPostProcess.cmake.
Change-Id: I9774ba1b123bc11cae972fa37054ef2c51988498
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Just like with qmake, separate the two "features".
Change-Id: Idf2a796c7c4aaa740c471688b2221d7041fed643
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
For ICU we have multiple components, and ICU becomes a public dependency
to QtCore.
When storing the INTERFACE_QT_PACKAGE_COMPONENTS property, make sure to
store the entire list of components, not just the first component -- by
turning the semi-colon separated list into a space separated list.
When processing the components at find_dependency time, we need to
reverse that and pass COMPONENTS directly to ensure a correct parameter
expansion.
Change-Id: I24a0708520e7d5fba039395a151034aee4d4c0e2
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
* Add labels so that ctest --print-labels and ctest -L <label> gives
insight over the test plan and the ability to run easily individual
tests.
* Unfortunately we can't do the TESTARGS indirection for arguments as
coin does with testlib, so instead pass the parameters to generate
the xml unconditionally.
Change-Id: I289de9c15c516e3ac3fe04771fdbd8d7a083ff1f
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When cross-compiling we take a shortcut in add_qt_tool() for moc, etc.
as the tools are already imported from the host build of Qt. However we
must still add the tools as a dependency in for example QtCore so that
when the cross-compiled QtCore is used, the host tools are implicitly
imported.
Change-Id: I83e4fd7f21e18472c0965c90c058dd2b55b6ec65
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
add_library(MODULE) creates libraries with .so extension on macOS,
but Qt plugins should have the .dylib extension.
Change-Id: I603e7abfb9d5b78c0c8ea526f9fe995bf36c3a50
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
We want our libraries to end up in the same bin directory, not inside the
Debug\ or Release\ sub-directories. Their distinct names avoid a clash.
For our tools such as moc, uic, etc. we need to place the release build into
the bin directory explicitly, as by default multi-config generators place
binaries into the Debug\ or Release\ sub-directory.
This is also needed as cmake's automoc itself expects moc to be in the
bin directory.
One effect of this is that with a multi-config build, it is always necessary
to perform a release build first, otherwise the debug build won't find moc/uic.
Change-Id: I1361823ddf5961a5f1bb517e4bca69e621cbce9e
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Remove the special case in QtGui and instead handle this in a generic
way so that QtPrintSupport is covered, too. For now we do this in the
same function where we run the regular target install() commands. It
doesn't quite fit into per-target PUBLIC_HEADER or PRIVATE_HEADER
properties as the qpa headers sit _next_ to public and private in a
separate qpa sub-directory.
Change-Id: I30aadaf9496cf0236f39a7c36a5163e4270edecc
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This changes many different CMake places to mention Qt6 instead of
Qt5.
Note that some old qt5 cmake config files in corelib are probably not
needed anymore, but I still renamed and kept them for now.
Change-Id: Ie69e81540386a5af153f76c0242e18d48211bec4
Builds fail on Windows, due to splitting on ':' on absolute file paths,
when handling syncqt injections.
Revert for now to get qt6 merge in faster.
This reverts commit 7559d508d1.
Change-Id: If139a8a1eb4ae7ccc8d7b835b12e83b03176e28b
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Reviewed-by: Qt CMake Build Bot
In case of a CMake superbuild, the actual install root in a non-prefix
build is the top-level build directory (not $TOP_BUILDDIR/qtbase anymore).
This is more in line how CMake lays out things by default.
Task-number: QTBUG-75582
Change-Id: I4e1744b5c877508fedc33e237eec28cb7436010b
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The GlobalConfigPrivate target should also be filtered out when
registering target dependencies, because there's no standalone
Qt5GlobalConfigPrivate.cmake file.
Amends fbfa067a30.
Change-Id: If89732bc2fd004b9644959f71339e22210483d7c
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
There were a few issues:
- Third party dependency info for plugins was not generated,
because the depends and public_depends variables were not fetched.
This caused issues when trying to use the qcocoa plugin in a
consuming application, because Cups::Cups was not found.
- Privately linked libraries in extend_target were not considered when
generating dependency info for modules. This caused issues in
QtThemeSupport, becauese it could not find Qt::DBus, due to that
target only being added as a private library in a conditional scope.
- Make sure to handle privately linked internal modules like
PlatformModuleInternal to map to the Qt5 package, because there is no
standalone package for it.
Also remove a TODO comment that says that qt_register_target_dependencies
should maybe be called in extend_target. That's already the case.
Change-Id: Ie99c52e800cd89e6f82008f1e38f4da5cd602929
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Provide add_qt_gui_executable() as function in our public API that takes
care of automaticWinMain linkage. We can use this in the future to
encapsulate similarplatform-specific behavior and adjustments, such as
module generation onAndroid.
In order for the examples to see the function in Qt5CoreMacros, three more
additional fixes were required:
* Do the build_repo_end() call _before_ attempting to build the
examples, as we need the build_repo_end() to include QtPostProcess
and complete the creation of all the target config files.
Otherwise the find_package() calls in the examples see something
incomplete.
* Add more QT_NO_CREATE_TARGET guards
* Always call find_dependency on the dependencies, regardless of the
target creation mode. This way a find_package(Qt5 COMPONENTS
Widgets) will still load Qt5CoreMacros.
Change-Id: I03ce856e2f4312a050fe8043b8331cbe8a6c93e6
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Commit abe12f600b moved the
_LARGEFILE64_SOURCE define to a central place and commit
449eee2d10 made it conditional to UNIX
(not WIN32). Somehow these two were left over though.
Change-Id: I23b08e84db804e9d5a4dde706af501c0918b460e
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Generate the android deployment settings json for android apk
targets. QtPlatformAndroid is now also deployed as a public
build dependency of QtCore. Some minor refactoring has been
performed to the naming of variables and functions to
better match the public facing apis.
Extra settings for the file can be configured using the
following target properties:
set_target_properties(Core
PROPERTIES QT_ANDROID_DEPLOYMENT_DEPENDENCIES "foo;bar"
QT_ANDROID_EXTRA_LIBS "foo;bar"
QT_ANDROID_EXTRA_PLUGINS "foo;bar"
QT_ANDROID_PACKAGE_SOURCE_DIR "/foo/bar/"
)
The file is generated using the function
qt_android_generate_depoyment_settings().
We need to install the android template files and jar
files during the android build as the androiddeployqt tool
wont work if parts of it are split between the host
install and the android install.
Added QT_BUILD_QT variable to check whether we are building
Qt from source.
Finally, we also force the stdlib to shared via cmake
configuration with -DANDROID_STL="c++_shared"
Change-Id: I063c47e11749d56ba4c6f02101dbcc09e1b9fe87
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This is needed for QmlDevTools in qtdeclarative.
Change-Id: I41adec15f292c91192e171b45d1e5d48764c37c4
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Move flags/options that we use for modules from add_module to the new
platform module target.
Change-Id: I89e414690336dcd37253432fe5116226d1c8dd82
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
extend_target.
In extend_target(Foo) we go over all the ModulePrivate dependencies
to assign them to FooPrivate. To do that we use the QT_KNOWN_MODULES
variable.
The problem is that the variable gets reset when we build a new
repository, so when we build qtdeclarative, QT_KNOWN_MODULES has no
entries for Core, Gui, etc, but only Qml, Quick, etc.
And yet QmlPrivate has to depend on CorePrivate.
Change the module Config.cmake files to append their target name
to a global variable called QT_ALL_MODULES_FOUND_VIA_FIND_PACKAGE.
The global variable gets populated every time find_package(QtFoo)
is called.
Use the union of QT_KNOWN_MODULES and
QT_ALL_MODULES_FOUND_VIA_FIND_PACKAGE when considering FooPrivate
libraries.
Change-Id: Ibd9449744478cea58eb5d9737cc8887b4df92420
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Don't try to report an installable public module .pri file for internal
modules.
Change-Id: Ide6a50420e0b5448b141c842df4c891baca4a9d9
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
Link to them from add_qt_module/plugin/tool
This way we set the warnings_are_errors flags just once
and also non-qtbase modules get them
Change-Id: I2b65a81694aaebdd7c886249f217c11f79492bad
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
... in superbuilds. PROJECT_SOURCE_DIR points to the wrong directory in
that case.
Change-Id: Ic0cba254734c4693b418dd8a0d8e77063914a9de
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Generate a pri file for public and private interfaces, but map CONFIG +=
internal_module to a cmake option and skip the former if set.
Task-number: QTBUG-75666
Change-Id: I3f4baf1277094f4c22149a9e8769734baf9a235f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
for modules, plugins and tools only (i.e. no tests nor examples)
this mimics the qmake behavior
default value is developer_build
Comes with some fixes in qmake since it seems in the qmake built it was
not having Werror, now does because we built it with add_qt_tool
Change-Id: I6f3237f25a6fedefa958644929e90f13837a12df
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This mirrors what happens for qmake. qt_plugin.prf does not
define these, but qt_module.prf does.
Change-Id: I742d3c766f6f4bd129fa6ccf85b5a67c6758e819
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This was added to the qmake build system in 220028d37c
Change-Id: Ieee8b4d47b8f9716c14c85cf3038f1074ee8c46a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Create CMake config files which can be used from the very same CMake
project. These CMake config files simply do not create any targets,
controlled via the QT_NO_CREATE_TARGETS.
This patch also allows to build qtbase.git:examples as a standalone
project, against an already-built Qt.
Ran this:
ag -s "QT " examples -l -0 | xargs -0 -n 1 .../util/cmake/pro2cmake.py --is-example
Task-number: QTBUG-74713
Change-Id: I44cce5a4048618b30f890c5b789592c227a8b47d
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Otherwise when compiling qxcb-glx-integration we would get a warning like
<command-line>: warning: ISO C++11 requires whitespace after the macro name
because -DQT_BUILD_QXCB-GLX-INTEGRATION_LIB is not a valid define name
Change-Id: Ie8cef93a47b14d75eaad77893f7182e1514dd616
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Only re-enable exceptions for the modules that do
CONFIG+=exceptions
in qmake
Change-Id: I9f19078adbdc1b8fa3d4102fb51a099e7e35522e
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
In particular, Qt targets extended with other qt targets
(eg. Qt::VulkanSupport or Qt::LinuxAccessibilitySupport)
after the first add_qt_module were not taken into account when generating
Depends files.
Note that this patch updates the minimum required version
to CMake 3.15
Change-Id: I747deedd4d59e385876bc1a834ef9bdb6078911b
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
so they are actually set for all the targets
and that the code is a bit simpler
Change-Id: I2cd253d0a3cec3f482b868f81e852edfa158d3f1
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
when largefile feature is enabled, in qmake world
this came from largefile.prf
Change-Id: I064da31328ad46157354c7012c7b8397c558cd1d
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
CMake will complain if you try to use a plugin in target_link_libraries,
and it won't produce import libraries on windows, or use .so.number
on Linux.
Change-Id: I6f0cf8267b3c0e6e5c888703596afe59b3a39141
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The plugin dll files were missing from install_dir/plugins/
Change-Id: I68655faf949e4b8fcab153c6c9b8ee14d3ad8ecc
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
We can't use the gold linker with the android NDK, which is the default
option. Using the gold linker results in linker crashes. QMake builds
also disables the gold linker.
Change-Id: I73de93150b160b4411715007bc7e40238b96d400
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Dlls were missing from the install_dir/bin directory.
Change-Id: I0b5ef685b779c91969bbfa877f226be2060f6e56
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In order for test lib to locate the file requested via QFINDTESTDATA, it
needs the build directory of the test (for example
$builddir/tests/auto/foo/bar) and __FILE__ expanding to a path to the
source relative to this build directory.
With ninja, __FILE__ is a path that is always relative to the top-level
build directory, not the per-test case one. Therefore the path
resolution in testlib fails.
To accommodate this, add_qt_test() now always sets QT_TESTCASE_BUILDDIR
as well as the newly introduced QT_TESTCASE_SOURCEDIR, which, as an
absolute path, removes the need to use __FILE__.
Change-Id: I16c2b0001e38162e6da9fdb1a61f4f8ce634fe46
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Hunter has recently added aliased target names that conform with upstream
CMake find module target names.
Extended the WrapFreetype to work with Hunter's freetype (lowercase) package
name.
Change-Id: I0e25f342c6930658f07f05d2e6a58cf94d2d168d
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This commit introduces infrastructure work to allow static builds of Qt
to handle importing of plug-ins.
Change-Id: Ife0ca3ca7276ea8ec96fe0eb6adf934fad7620ec
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
It's needed when building QtQml on Windows, otherwise
compilation fails.
Add it as a private define for every module being built,
as it is done in qt_module.prf.
Change-Id: I1e322d1da15adea8b3f037a722b3260a552dfb62
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The warning used to be a fatal error, until we found out that certain
packages might provide optional targets, or provide one target
out of a possible set.
Until we figure out a better way to deal with that, remove the
barrage of warnings while configuring.
Change-Id: Iacf93a997a8f87f81167ac7c4cc991212e7fca5d
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Jean-Michaël Celerier <jean-michael.celerier@kdab.com>
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
We use
qt_find_package(SQLite3 PROVIDED_TARGETS SQLite::SQLite3)
which intends to find cmake's FindSQLite3.cmake and expects the
existence of the corresponding target. However qt_find_package first
tries to call find_package in config mode, which does not interact well
with vcpkg's sqlite, where sqlite3-config.cmake is provided to support
multi-config targets. So that call will appear to succeed, yet the
expected targets are not there of course.
Therefore this patch adds a sanity check for the target existence and
allows for a fallback to the module mode for find_package, in order to
find CMake's FindSQLite3.cmake.
Change-Id: I660f26c38369c3504df1c590e9d3a51ff1f65c6c
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Also fix the QT_BUILD_SHARED_LIBS usage. While building qtbase, it
is assigned later than the call for
qt_generate_global_config_pri_file(), so it used always choose static.
Make sure to check for BUILD_SHARED_LIBS as well.
Change-Id: I66f03e5adacc89646147fc96154bee8002b2b9cc
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
We used to copy a qconfig.cpp.in file verbatim.
Add some plumbing to actually compute the strings and their lengths
as it is done in qtbase/configure.pri.
Also make sure to replace the hardcoded linux mkspec with one that is
automatically determined.
Of course both the detection of the mkspec, and the hardcoded strings
for include, lib, etc. should be fixed in the future.
This is a stepping stone to allow building a Qt application using
the qmake built by CMake.
Change-Id: I2e6754f44b20b09b09d14fd85785d56288e6517b
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
* Generate module .pri files
* Generate qconfig.pri
* Propagate MODULE_CONFIG from the .pro files
This enables the basic use-case of simple application builds that for
example use the moc. Omitted from the patch is support for private
module configurations, prl files (should we do this?) and possibly more
hidden gems that need to be implemented to for example support building
Qt modules with qmake.
Task-number: QTBUG-75666
Change-Id: Icbf0d9ccea4cd683e4c38340b9a2320bf7951d0d
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Since LINUX is not set when targeting Android, we must extend these
conditions manually.
Change-Id: Ie78167d452e0806bfa64773c1e311a99f4a28f8c
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The location of the forwarding headers when not yet installed, depends
on whether we do a prefix or non prefix build.
In a prefix build the /include folder should be in the current repo
build dir.
In a non prefix build, it should be under qtbase/include.
But the actual generated files to which the forwarding headers point,
are always in the current repo build directory.
Also syncqt needs to know both the current repo build directory
specified by -builddir, and the output directory specified by
-outdir.
In a prefix build, both are the same.
In a non-prefix build, builddir should be the current repo build dir,
and outddir should be qtbase's build dir.
Also for non-qtbase repo build directories (like declarative),
examples need to have the current_repo_build_dir/include directory
as an include path, so that framework style includes like
#include <QtQml/QQmlEngine>
work correctly.
Take care of all that, and add a bunch of comments explaining the whole
injected / generated headers interaction.
Change-Id: I612ad7549ce499c4979ee994e998b558716d45ca
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
QtQml uses QLALR to generate a grammar, but the qmake qlalr feature
seems to be a general one, so the corresponding CMake implementations
are kept in qtbase for now.
Change-Id: Ibe916878b18155ddc5bb08793dd2075ebfa8f282
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Qt CMake Build Bot
Before this patch we enabled AUTOMOC, AUTORCC, AUTOUIC for all targets
that did not opt out.
Aside from being wasteful from a performance point of view,
this also caused issues when trying to build qtimageformats which
does not depend on Widgets which is the package that exposes uic.
To avoid this, enable only AUTOMOC for all targets by default, and
UIC and RCC can be opted in via the ENABLE_AUTOGEN_TOOLS option.
To facilitate this some refactoring had to be done, like moving some
common setup for all autogen tools into a separate call, and making
sure that extend_target understands the autogen options, because some
ui files are only added conditionally.
Also the conversion script has been adapted to output the
ENABLE_AUTOGEN_TOOLS option whenever a .pro file contains at least
one FORMS += foo assignment.
Note that we don't really use AUTORCC while building Qt, so nothing
opts into that at the moment.
Task-number: QTBUG-75875
Change-Id: I889c4980e9fb1b74ba361abed4044737f8842ea4
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
At the moment, Coin builds tests as a separate qmake invocation
against an installed Qt. We need to support the same with CMake.
Change the tests subdirectory to be a standalone CMake project when
CMake does not detect an existing QtTest target while processing the
subdirectory. If the target exists, it means we are building the whole
repo, if the target does not exist, we need to call find_package
to find the installed Qt.
Refactor and move around a few things to make standalone tests build
successfully:
- add a new macro to set up paths to find QtSetup
- add a new macro to find all macOS frameworks
- add a new macro to set up building tests
- add a new macro that actually builds the tests
- export the INSTALL_CMAKE_NAMESPACE value into the BuildInternals
Config file
- export the CMAKE_BUILD_TYPE value, because a test project doesn't
have a .git subdir and thus defaults to be built in Release
mode, even though qtbase might have been built in Debug, so to
avoid the mixing, the propagate the build type
- stop overriding INSTALL_CMAKE_NAMESPACE and
QT_CMAKE_EXPORT_NAMESPACE inside QtSetup if they are set, because
the tests project doesn't specify a major version, and if we
override the values, the moc / uic targets don't get the correct
major version prefix and configuration fails
Change-Id: Ibdb03687302567fe325a15f6d1cb922c76240675
Fixes: QTBUG-75090
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Add a prefix for generated .qrc files so for in-source builds we don't
end up overwriting htem.
Change-Id: I8eef582479eb45d67585f6aab87b288393bbadb5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
QT_CMAKE_EXPORT_NAMESPACE is used by the Qt packages to make features
available to the consuming CMake project. The value was moved to the
BuildInternals Config file, but that's wrong because consuming
applications not including the BuildInternals component would fail
to use any other Qt package.
Move QT_CMAKE_EXPORT_NAMESPACE to be propagated with QtCore package
again.
Amends 9542e78525.
Change-Id: I9841ac8c2828b00c0111d59e8976c889554e0ce1
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
To implement this, create a new Qt5BuildInternals package.
All child Qt modules like qtsvg should use
find_package(Qt5BuildInternals) or
find_package(Qt5 COMPONENTS BuildInternals) in the their
top level CMakeLists.txt.
This will make the qt_build_repo() macros available.
For qtbase we slightly cheat, and specify a CMAKE_PREFIX_PATH
pointing to the source folder that contains the BuildInternals
package.
For the other modules we actually use a configured and installed
package Config file.
This change moves variables that used to be written into the
QtCore Config file into the BuildInternals package. This way
things that are relevant only for building additional Qt modules
does not pollute the QtCore package.
Task-number: QTBUG-75580
Change-Id: I5479adff2f7903c9c2862d28c05c7f485ce3e4eb
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Currently to build qtsvg we have some copy-pasted code to set up
the paths for QtSetup and QtPostProcess to be found.
To make it cleaner, introduce two new macros called
qt_build_repo_begin and qt_build_repo_end(). The first one
should be called in a child repo like qtsvg, right after
a find_package(Qt5) call, and the second one at the end of the
repo top-level CMakeLists.txt file.
In order for the macros to work, extract some of the variables
which were set in Qt5Config into Qt5CoreConfig instead. This
makes sure that it works also for find_package(Qt5Core) calls.
Task-number: QTBUG-75580
Change-Id: I85267c6bd86f9291ec2e170fddab1006ab684b5c
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
A non-prefix build is a build where you don't have to run
make install.
To do a non-prefix build, pass -DFEATURE_developer_build=ON when
invoking CMake on qtbase. Note that this of course also enables
developer build features (private tests, etc).
When doing a non-prefix build, the CMAKE_INSTALL_PREFIX cache variable
will point to the qtbase build directory.
Tests can be run without installing Qt (QPA plugins are picked up from
the build dir).
This patch stops installation of any files by forcing the
make "install" target be a no-op.
When invoking cmake on the qtsvg module (or any other module),
the CMAKE_INSTALL_PREFIX variable should be set to the qtbase build
directory.
The developer-build feature is propagated via the QtCore Config file,
so that when building other modules, you don't have to specify it
on the command line again.
As a result of the change, all libraries, plugins, tools, include dirs,
CMake Config files, CMake Targets files, Macro files, etc,
will be placed in the qtbase build directory, mimicking the file layout
of an installed Qt file layout.
Only examples and tests are kept in the separate module build
directories, which is equivalent to how qmake does it.
The following global variables contain paths for the
appropriate prefix or non prefix builds:
QT_BUILD_DIR, QT_INSTALL_DIR, QT_CONFIG_BUILD_DIR,
QT_CONFIG_INSTALL_DIR. These should be used by developers
when deciding where files should be placed.
All usages of install() are replaced by qt_install(), which has some
additional logic on how to handle associationg of CMake targets to
export names.
When installing files, some consideration should be taken if
qt_copy_or_install() needs to be used instead of qt_install(),
which takes care of copying files from the source dir to the build dir
when doing non-prefix builds.
Tested with qtbase and qtsvg, developer builds, non-developer builds
and static developer builds on Windows, Linux and macOS.
Task-number: QTBUG-75581
Change-Id: I0ed27fb6467662dd24fb23aee6b95dd2c9c4061f
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Separate the logic to find all used libraries from the code that writes out
the link_library information into the CMakeLists(.gen)?.txt files.
This patch will remove some "PUBLIC_LIBRARIES Qt::Core" from generated files.
This is due to us handling some Qt libraries in special ways in some of our
add_qt_* helpers. These special libraries were added to the LIBRARIES section,
but actually they should be added to the PUBLIC_LIBRARIES section instead. Do
so now, so that the newly generated files do not break things again.
Change-Id: I588781087a8aecc4d879e949735671d8085f0698
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Tested with MinGW 7.3.0 64 from Qt 5.12 installation.
The CMake 3rd party libraries I used from hunter project (with some
package, and target names changes)
Change-Id: Ie89555a6cd8bdb7182f9b2dd2c3c39784c523ead
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Previously we just recorded that Gui has to link against
Vulkan::Vulkan_nolink, but if an application consumed Gui, it wouldn't
find that target.
We need to record that if a module links against Vulkan_nolink, and
then generate a find_dependency(Vulkan) call in the module config
file.
We also have to assign the _nolink interface library to an export
(the Qt5 one), so that it gets installed as a target.
Change-Id: Icbc29ff4161ab18fdd162196ae128e29c1ee8c80
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Generate CMake config files which export Qt targets with a Qt:: prefix
(i.e. without a major version suffix in the namespace)
Change-Id: Ia07f98be6d0e24c196e3880b7469f1f0c6232c06
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Also needs the include/ from the top-level binary dir added to the
include path.
Change-Id: I7e0d82a2ee24d9bf9ffe9da5fd02b3b223fd48e7
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This is needed because dependencies added after add_qt_module with extend_target
are currently not taken into account.
Task-number: QTBUG-75538
Change-Id: I2c72207fb88b2480e41a2c8550978fb194275617
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
* When using a sysroot, just setting CMAKE_PREFIX_PATH to the
QT_HOST_PATH is not sufficient in finding for example Qt5CoreTools
because the QT_HOST_PATH would be prefixed by the sysroot. So this
patch switches the mode to also enable looking outside of the sysroot.
(done by Alexandru)
* Once the Qt5CoreToolsConfigVersion.cmake was found, the built-in check
for 32 vs. 64 bit compatibility by looking at the provided
CMAKE_SIZEOF_VOID_P (4 when target is armv7 for example) and comparing
it against the void* size used when building the tools would fail.
Explicitly unsetting CMAKE_SIZEOF_VOID_P disables this check, and
that's fine as we're not interested in any exported library targets --
where this could cause problems -- but merely programs to run.
Change-Id: If2931dad023e39a3dbdaa17ac095131ad2c0ca60
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This is because some FindPackage may produce some targets only on some
platforms - e.g. qt_find_package(OpenGL) needs to define
the provided target OpenGL::GLX which will only exist on linux but
is required by various CMakeLists.txt files.
Change-Id: I74515470f5d56c246f489df74901ad4223a92a70
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This change introduces a new function called qt_find_package()
which can take an extra option called PROVIDED_TARGETS, which
associates targets with the package that defines those targets.
This is done by setting the INTERFACE_QT_PACKAGE_NAME and
INTERFACE_QT_PACKAGE_VERSION properties on the imported targets.
This information allows us to generate appropriate find_dependency()
calls in a module's Config file for third party libraries.
For example when an application links against QtCore, it should also
link against zlib and atomic libraries. In order to do that, the
library locations first have to be found by CMake. This is achieved by
embedding find_dependency(ZLIB) and find_dependency(Atomic) in
Qt5CoreDependencies.cmake which is included by Qt5CoreConfig.cmake.
The latter is picked up when an application project contains
find_package(Qt5Core), and thus all linking dependencies are resolved.
The information 'which package provides which targets' is contained
in the python json2cmake conversion script. The generated output of
the script contains qt_find_package() calls that represent that
information.
The Qt5CoreDependencies.cmake file and which which dependencies it
contains is generated at the QtPostProcess stop.
Note that for non-static Qt builds, we only need to propagate public
3rd party libraries. For static builds, we need all third party
libraries.
In order for the INTERFACE_QT_PACKAGE_NAME property to be read in any
scope, the targets on which the property is set, have to be GLOBAL.
Also for applications and other modules to find all required third
party libraries, we have to install all our custom Find modules, and
make sure they define INTERFACE IMPORTED libraries, and not just
IMPORTED libraries.
Change-Id: I694d6e32d05b96d5e241df0156fc79d0029426aa
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
CMake will now generate config and target files for each module that
provides tools. As a result, namespaced global targets such as
Qt5::moc or Qt5::rcc can be made available.
Third party projects that require just these tools, and not the Qt
modules themselves, should specify CMAKE_PREFIX_PATH pointing to the
installed Qt location, and call find_package(Qt5CoreTools),
find_package(Qt5GuiTools), etc.
It is also possible to call
find_package(Qt5Tools REQUIRED Core Widgets) where the last option
is a list of modules whose tools should be imported.
Note that all the tools are in the Qt5::
namespace and not in the Qt5CoreTools:: or Qt5WidgetsTools::
namespace.
This commit also changes the behavior regarding when to build tools
while building Qt itself.
When cross compiling Qt (checked via CMAKE_CROSSCOMPILING) or when
-DQT_FORCE_FIND_TOOLS=TRUE is passed, tools added by add_qt_tool will
always be searched for and not built.
In this case the user has to specify the CMake variable QT_HOST_PATH
pointing to an installed host Qt location.
When not cross compiling, tools added by add_qt_tool are built from
source.
When building leaf modules (like qtsvg) that require some tool that was
built in qtbase (like moc), the module project should contain a
find_package(Qt5ToolsCore) call and specify an appropriate
CMAKE_PREFIX_PATH so that the tool package is found.
Note that because HOST_QT_TOOLS_DIRECTORY was replaced by QT_HOST_PATH,
the ensure syncqt code was changed to make it work properly with
both qtbase and qtsvg.
Here's a list of tools and their module associations:
qmake, moc, rcc, tracegen, qfloat16-tables, qlalr -> CoreTools
qvkgen -> GuiTools
uic -> WidgetTools
dbus related tools -> DBusTools
Task-number: QTBUG-74134
Change-Id: Ie67d1e2f8de46102b48eca008f0b50caf4fbe3ed
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Otherwise add_qt_executable will still link against Core,
and thus building qmake in a static build will fail.
Amends a1752276e0
Change-Id: Iebbdf9d0a2808a9eaeffdf8fbdb44ff5e2920f3b
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Qmake should not rebuild all the code in QtCore, but currently it does.
When linking against QtCore, all the symbols get duplicated. A clever
linker will "deduplicate" the symbols again, so this actually works
with shared Qt builds, but it fails for static builds.
Do not rely on the linker being clever and just do not link Qt at all
for qmake.
Change-Id: I0f79ed9176a19ee884dd425e5f23c26cf69dc422
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Use absolute paths for source files, and relative paths plus a correct
working directory for output files.
This is required to work around a limitation of the dbusxml2cpp tool
where it splits a command line option on a colon ":". Windows paths
contain colons, and that breaks the internal logic of the tool when
passing absolute paths.
Change-Id: Ic653f1317ae4f68bb2f488c117fe48c34310c76e
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Applications that have the WIN32_EXECUTABLE property set,
must have a WinMain function. In qmake's case, this function
is provided by the qtmain static library.
Until that is implemented in CMake land, disable the property on
Windows for all qt executables. This fixes the linker issues while
building examples.
Task-number: QTBUG-75195
Change-Id: I323d4dd899f716cd6b9b7f4b5ecb76b22f462fc4
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Use an imported target to create _nolink targets. This gets rid of
the need to have an helper target that gets aliases to get work
around the problem of the original target might having a "::" in
its name.
Change-Id: I4618980cf2c673ebf5caca593bccf122b3c81480
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Add a helper function to QtBuild that generates Foo_nolink versions
of Foo library targets.
Map 'Foo/nolink' libs found in qmake to Foo_nolink.
Automatically run helper function to create _nolink targets as
part of extend_target.
Change-Id: I4c23ea68b3037d23c9a31d4ac272a6bd0565f7c0
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Tests and their helpers should only be used in the build directory.
Change-Id: I5aa9fcf734b6b3667f91df7c84d083f944c452c9
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Makes qtextcodec test succeed
Like qmake does
qt_test_helper.prf says
"
If an auto test needs a helper application, this helper should
be put into the same directory as the test itself.
"
Change-Id: I02cb36d2237cdb72912c943250b843c33ffcd64a
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This includes:
- tests
- tools that are only used duing the Qt build (tracegen and
qfloat16-tables)
Change-Id: I3a5f678682b5b9318012568a9e4dcdda0967f89b
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
The install path takes into account the path structure of the source
directory, so that not all tests are bunched up into /tests, but
rather /tests/auto/foo/bar.
Change-Id: I5e32d2e41ae8f095f4eac6654973508efd598df0
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Only require TYPE if no OUTPUT_DIRECTORY, ARCHIVE_INSTALL_DIRECTORY
and INSTALL_DIRECTORY is provided.
Change-Id: I6db1cfaa576bfa3ee3dc8ecf81db20e3afcd61e2
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
While building on macOS, AUTOMOC sometimes hanged indefinitely.
The problem was that AUTOMOC was executed for the qmacstyle
plugin before moc was actually built.
Because of an upstream bug in CMake, AUTOMOC was caught in a deadlock
without reporting that spawning the moc process failed. Specifically
if a libuv spawn() call failed, the condition variable for a waiting
thread was not notified, and the thread kept waiting forever for the
process launch to finish.
Fix the dependency by setting the AUTOGEN_TARGET_DEPENDS property
on all targets that have AUTOGEN tools enabled. This makes sure that
moc and friends are built before they are used.
Also add some special cases to disable autogen tools on certain targets
to break cycles between targets.
Fixes: QTBUG-74636
Change-Id: I6e689e63cba1962525f169f332a58498d173c0a6
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Mikhail Svetkin <mikhail.svetkin@qt.io>
Make add_qt_executable link to Qt::Core by default. Add a BOOTSTRAP
flag to disable this behavior again.
Pass BOOTSTRAP on from add_qt_tool to add_qt_executable.
Change-Id: I26e7f1e03254122f626b3765cccc0dc4414a4fc0
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Allow to override the install directory for Qt executables.
Change-Id: I9561976eefe9c7b573bb97ddaaa39e30d3b6d9fb
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Use the same names for DBus adaptor/interface files that are also
used by qmake. E.g. io.qt.something.xml will be turned into
something_interface.(cpp|h) or something_adaptor.(cpp|h).
Change-Id: I799b8aee7addd1fe590e8f3ec078e5325b68d5b1
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Treat a relative path in OUTPUT_DIRECTORY as relative to the top level
build directory, not to the current build directory.
Change-Id: I4d409d1362a8f73d13b93cf5ab98e82e60dd62cb
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
- executed pro2cmake script on windows qpa plugin
- added windowsuiautomation platformsupport project
- fixed plugin dlls and lib files to be written to the same path
- fixed an issue comErrorString which used implicit casting
from QString to char*, but plugins are currently built
with QT_NO_CAST_TO_ASCII
Task-number: QTBUG-74140
Change-Id: I5db3b6c5264bbd5dfba2998b049fda36eb312c70
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
- Fix qmake build
- Fix QtNetwork moc-ing, by including the moc files
inside the cpp files
- Fix sql odbc plugin by including QT_PLUGIN define
- Fix Boostrap to link against the Platform target, to get the
correct Unicode and WIN64 defines.
- Fix vulkan headers to be found
- Fix freetype bzip and png unresolved symbols / linker issues
when building minimal platform plugin (also need to make
sure to use the vcpkg toolchain instead of CMAKE_PREFIX_PATH
because then find_package is overridden, which does magic
to properly propagate static library dependencies).
- Fix qfilesystementry test not to be built without private
tests feature (it led to undefined symbols issues).
- Make sure to remove QT_NO_CAST_TO_ASCII define when building
QtCore, so that the qstringbuilder3 test builds
successfully.
Task-number: QTBUG-74140
Change-Id: I353d08392b604d55f8e62cdd8696d1e19a3c084a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
* Handle BASE to give the directory files will be relative to.
* Support lang="foo" for qresource sections.
Change-Id: I36087220d03789a97105dc6dd1aca7a25a063d9f
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
moc does not generate moc_defs.h and that's why moc does not understand
that he runs on macOS.
It happens because cmake can not find Qt version.
Change-Id: I34c51ebb69dc1ff782a0f129e114cda819122805
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Add a function to set gc-sections flags on the linker.
Change-Id: I9ac02364836d2aa8de239adb8d3a5d29659a4007
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Don't try to build uic but instead import it. This is done centrally now
in add_qt_tool.
Change-Id: I241fbb924de68549e9c0320e157351bd7b1bf5c3
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
Public interface libraries of the private target need to be first looked
up via `find_dependency(...)` in the CMake config files as well.
This patch is just changing the foreach() loop and defer the package
config file generation.
Change-Id: Iecaf7f778379b526f12ac6a42e76d714d9349b2c
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Lifetime of the variable is bound to the function body. Use a CACHE
variable to escape it (and to speed up future calls to the function).
Change-Id: I2d164a1c94e64cc652e65c1eea0522f3d911ad82
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
... when QtBuild.cmake is being included from another Qt module
Change-Id: Ia55e03422cc84a56dd9eac640621e5b2ee9681bd
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This makes it possible to use the binaries out of the box. This is
particularly relevant for program binaries that link against QtCore
dynamically, when trying to use these binaries during cross-compilation.
Change-Id: I7dee93194be3fff5c6e3bbb9e202e4cf5e19b6d0
Reviewed-by: Volker Krause <volker.krause@kdab.com>
The syncqt generated headers are optional, i.e. their source may not
exist -- so for now make their installation optional (as it seems to
have been the case with qmake).
Change-Id: Ieaeb3d13a1d8ff1f158b5b1c918750fec48d3bef
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
Enables the use of e.g. QT_NO_DEBUG in compiler flags, -fPIC, passing on of
QT_NAMESPACE, etc. pp.
Dropping a lot of custom code which handled adding imported targets for
the command-line tools (this is all being handled by CMake already).
It needs to be investigated if we need to resurrect
Qt5GuiConfigExtras.cmake.in in one way or the other.
Change-Id: I4fa141b68fddaad4f33e628c59d5d0b3a7b3a096
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
For now create targets a la "Qt5::Core" to stay compatible with the
current Qt5 naming scheme. The name is controllable via a CMake option.
Change-Id: If43c058221949b1900c2093f39ccc9d0f38028f1
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Introduce a new cached variable INSTALL_CMAKE_NAMESPACE for defining the
prefix used for CMake config files (c.f. "${PREFIX}Core/${PREFIX}CoreConfig.cmake")
Also make sure to `find_dependency(...)` the required packages inside
the individual CMake config files. I.e. in Qt5WidgetsConfig.cmake,
search for Qt5Core, etc. pp..
Change-Id: Idc027925fe9d5323091c4853803ad5ce44b1afc6
Reviewed-by: Jean-Michaël Celerier <jean-michael.celerier@kdab.com>
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Allows to install headers such as QtCore/qtconfig.h,
QtGui/qvulkanfunctions.h, etc.
Change-Id: I93f384cdc8bbee07fab316d7e232aae1d209f33e
Reviewed-by: Jean-Michaël Celerier <jean-michael.celerier@kdab.com>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This makes testing for Qt with namespace builds easier in extend_target.
Change-Id: I58ab985a2ed39859fb65d35f8f69065fed2a5c9b
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Enable a flag so that cmake documents which extend_target calls it
acts upon and which ones are skipped.
Change-Id: I1e2d4da47b93d6b5d7b7ec25b7bc6341f38b3dca
Reviewed-by: Albert Astals Cid <albert.astals.cid@kdab.com>
Convert QMAKE_USE, QMAKE_CXX_FLAGS and QMAKE_LFLAGS into CMake.
Change-Id: I53a5b91664b6ab71892d4381c00f8d744d7d7abd
Reviewed-by: Albert Astals Cid <albert.astals.cid@kdab.com>
Since the code wants pinger_interface.h as include
name and the qt_create_qdbusxml2cpp_command function was
using the filename as source for the next filename i introduced
a new option DBUS_ADAPTOR_BASENAME/DBUS_INTERFACE_BASENAME to set the
name of the resulting file
Change-Id: I582d578b68275e4530e91a88631ae43fd1ae06fd
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
This is less self-contained than what we have, but significantly speeds
up cmake configure/generate runs.
This patch also warns when a feature is already defined.
Change-Id: I8cab63e208ba98756b47d362a39b462f5ec55e20
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This simplifies the handling of features a bit as it removes the special
code to store two sets of features in Qt::Core.
Change-Id: I536d41cfc76a02af054e3cfbad6bda50b1e9e49a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
* Only import features once
* Move Core specific code into its CMakeLists.txt file
* More consistently use target names like "Core" to
refer to "Qt modules". We tend to require either "Core"
or "QtCore" in places, which I find confusing.
Change-Id: Id54161bc5468412750cb9eb7eeb15de3812e8a09
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
... and fix the fallout of this change. It results in more targets being
passed overall (instead of a strange mix of targets and module names),
so this is a good thing(TM).
Change-Id: I1c4326b80e2c6675356587879ec8471ef7249a50
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
For Qt6 we want to have Qt6::foo and Qt::foo. Enable that consistently.
Change-Id: I3cf05c4171b13029bf508d307945e8be4687e86b
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
Do not try to push features up into the parent scope if none were added.
This avoids a lot of iterations over all defined variables.
Change-Id: Idb9a4c86643c0ca773584a05b3a0590cfab7514d
Reviewed-by: Mikhail Svetkin <mikhail.svetkin@qt.io>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Add a simple test for moc-file handling and fix the implementation
to make the test pass.
Change-Id: I34e8d65a5e01a6f557d3a3d8cb262fd147ad78e4
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Add a test for QRC file handling in cmake and fix the qrc file handling
to handle qrc files in subfolders properly.
Change-Id: Iff4224e59e7ee1badacce5fc00dbf68aef69bffe
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Add a test for uic handling and make it pass.
Change-Id: I7e11f9f1fba0e40c748e3590a0d0cbb72c9ebc28
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Simplify qt_make_output_file and add a simple test for it.
Change-Id: I87694291cd877545ade5d9c42d1424d7b3b7b567
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
extend_target does not import public and private features.
For example:
Qt::CorePrivate matches as ('CorePrivate'), but it should be ('Core', 'Private')
Change-Id: I99144d42b7e0a8f7c4501d3e0eaf04b270c6b4d6
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Make sure the features of Qt libraries are available when linking to that
library via the add_qt_* functions.
This was broken for any library that did not end with "Privat" or
"Private".
Change-Id: Iff0ad441b601e0d131b0e30f2069110806410297
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Simplify the scope handling of features by providing a function that
just pushes all QT_FEATURES into the parent scope. Use it.
Change-Id: Ic6552fe495394d73fcec6becf6852745ec2d6d59
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
