In openSUSE 15.0 /etc/os-release the ID of the OS was
changed from "opensuse" to "opensuse-leap". So every blacklisting
we did for opensuse, didn't cover opensuse-leap. This one adds
opensuse-leap as a blacklisted platform whenever opensuse
was blacklisted.
Task-number: QTBUG-70463
Task-number: QTBUG-51399
Change-Id: I5879eb34926757163973d8b9442eae58f47d2f11
Reviewed-by: Liang Qi <liang.qi@qt.io>
For ControlType != QSizePolicy::DefaultType, qCountTrailingZeroBits()
is used which, MSVC 15.8.1 does not consider constexpr due to built-ins.
Exclude the check by #ifdef.
Task-number: QTBUG-69983
Change-Id: Ifc3dc3d94a804246bee1705fc8f3ac9b04ee4d32
Reviewed-by: Alexander Shevchenko <sav_ix@ukr.net>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When adjusting the tab order for compound widgets, it can happen that
the order is already correct. The check for this case forgot one case
which lead to a garbled focus chain.
Task-number: QTBUG-68393
Task-number: QTBUG-69619
Task-number: QTBUG-10907
Change-Id: Ic3242746bdcf3a4db6ea8daa1498381500ca116d
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Fails on previous 42.3 and also 15.0. Just covering "opensuse" saves
us from new commits every time we upgrade our openSUSE. We have a bug
open of it after all.
Task-number: QTBUG-51399
Change-Id: I5c0869daea41b1886faba3d0caaa0804a3705d54
Reviewed-by: Liang Qi <liang.qi@qt.io>
Frameless obscured windows do not receive WM_PAINT/expose events on
Windows. Qt::WA_Mapped needs to be set on them to ensure updating works.
Task-number: QTBUG-39220
Task-number: QTBUG-52039
Task-number: QTBUG-58575
Task-number: QTBUG-63927
Change-Id: Ic6c11f2be96378b6a6b61296f1f3e13cd49b50a6
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
This test was un-blacklisted in 4050ee6ac7
but apparently it is still not stable.
Task-number: QTBUG-69666
Change-Id: Iaf933ee27d54ebbfa52d0a8d7b1def0ca91808e7
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Additionally to setting the cursor position we have to make sure that
enter and leave events are triggered. As WinRT at the moment only supports
maximized/fullscreen native top level widgets, an enter or leave event has
to be triggered, every time the cursor enters or leaves the core window.
Same as is done on Windows desktop an enter event is immediately followed
by a move event even for emulated mouse events.
Change-Id: I4b9a7b07f8e24b7887619f96979a064d933788aa
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
This autotest fails on the new Ubuntu 18.04 platform.
Task-number: QTBUG-68864
Change-Id: I799defcec3a41d86a604bfcd4c2e1081ae4e0e53
Reviewed-by: Simo Fält <simo.falt@qt.io>
Wrong test was blacklisted for this commit.
This reverts commit 85607bd70d.
Change-Id: Ica5272799afec88c05e2cd137835bcdcb587836e
Reviewed-by: Simo Fält <simo.falt@qt.io>
The test and its helper were removed some time ago.
Change-Id: Id82a2a1bf829f272e9c1447e697935934c923092
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Not putting executables into debug/release subdirectories leads to the
WinRT AppxManifest being overwritten by the wrong configuration. When Qt
is configured with -release for example, it was possible that the debug
manifest (Manifest files are always created next to the target) is
written last and thus contains debug VCLibs as a dependency.
Additionally the test was changed in that way, that the resulting file
system structure (having helper and test application in a "top level"
debug and release folder) is the same structure as in tst_qobject.
Change-Id: I017b501506c54c4b89773d2b949c097598bc7049
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The original code was added by b316c3ac5e
(in 2012). This patch changes two things:
1) We now rely on WM to position a window based on the set gravity. It
should not be necessary to calculate coordinates manually as was done
in windowToWmGeometry(). We don't even know the decoration size before
the window is mapped.
2) We now update gravity whenever needed instead of hardcoding based
on what Qt APIs (setGeometry vs setFramePosition) where used to set
the initial window position.
The patch from b316c3a says:
"Determine gravity from initial position. Do not change later as
it will cause the window to move uncontrollably"
Since it did not elaborate on the situation, we can only assume
that it was caused by another bug in Qt at the time or perhaps
a broken WM. From [1]:
"Applications are free to change their win_gravity setting at any
time. If an Application changes its win_gravity then the Window Manager
should adjust the reference point, so that the client window will
not move as the result."
Tested on Ubuntu/Unity, KDE/KWin, Gnome-shell/Mutter, Lubuntu/OpenBox.
Works as expected everywhere expect Unity. Unity seems to ignore
XCB_GRAVITY_STATIC and treats it as XCB_GRAVITY_NORTH_WEST, which means
that setGeometry/setFramePosition produce the same placement on this WM
(the behavior was the same also before this patch).
P.S. Also renamed xRect -> rect, which was a leftover from
ae5f2a6672
With this change we can un-blacklist QWidget save/restore geometry
auto tests.
[1] https://specifications.freedesktop.org/wm-spec/latest/ar01s09.html
Task-number: QTBUG-66708
Change-Id: I381eef5d34dddb04de16a897ce5540b9c430b216
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
According to local testing and Grafana statistics for the period of the
last 1 year, this test has not been failing on XCB.
Change-Id: Ia7fda4c42d4aeaecd4485d18383cf46bf6af63d1
Reviewed-by: Kari Oikarinen <kari.oikarinen@qt.io>
QWidget::restoreGeometry() is calling QWidget::move() with restoredFrameGeometry,
which internally calls setGeometry() and sets positionPolicy = QWindowPrivate::WindowFrameExclusive,
which is invalid: restoredFrameGeometry is WindowFrameInclusive geometry.
QPA plugins rely on correctly set policies when interpreting x,y. QWidget::move()
was not designed for this AFAICT, so making it to accept frame geometry is
no-op. It is widely used legacy code, changing it could cause regressions.
Save/restore API was introduced in Qt 4.2, at that time we did not have APIs
like QWindow::setFramePosition(), so its unclear why geometry() was not stored
instead. The documentation also is somewhat unclear:
"[..] save the geometry when the window closes [..]"
Frame or client geometry? It does not specify. And from the code we see
that frame geometry was passed as client geometry, not making the original
intention clearer. Besides that, restoreGeometry() is full of other undocumented
assumptions where to place windows and when to fail (fortunately its easy
to write your own save/restore logic). Added a Qt 6 note in the source code.
What this patch changes:
Now we store geometry() in saveGeometry() and use that value in restoreGeometry()
by setGeometry(). This does not cause any behavior difference in window
positioning (tst_QWidget::saveRestoreGeometry still works). Geometry restored
from data saved with earlier versions of saveGeometry() might be positioned at:
x + leftMargin, y + topMargin.
This patch makes tst_QWidget::saveRestoreGeometry to always fail instead
of being flaky. Blacklisting for XCB instead of selected distros.
Also enabled excluded code paths for XCB on tst_QDockWidget::restoreDockWidget().
It does not seem to be flaky, maybe it was in 2015, but lot of things have changed
since then.
Task-number: QTBUG-66708
Change-Id: Ic86a6fd091e2c71b7550b2f476386da704253cd4
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
... as specified in the documentation. This was a regression from Qt4
and can cause mouse cursor flickering durig dragging on e.g. custom
widget where some areas of the widget do not accept drag-and-drop.
Task-number: QTBUG-67155
Change-Id: Iaa6f9407181931ed8e3d6a8fec13fd59d3c8625d
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
This was a regression from Qt4 and also is the documented behavior.
In addition this patch fixes various issues with cursor shape updating
that were discovered along the way and that are necessary for testing
the new changes.
The code in QGuiApplicationPrivate::processDrag() also needed a fixup,
particularly the resetting of QGuiApplicationPrivate::currentDragWindow.
Without this fix we would get DragMove (the one that immediately follows
the DragEnter) only for the first DragEnter event. For example when dnd
starts on mouse press then for mouse click we would get:
<click> DragEnter->DragMove->DragLeave <click> DragEnter->DragLeave
but the expected is:
<click> DragEnter->DragMove->DragLeave <click> DragEnter->DragMove->DragLeave
Task-number: QTBUG-34331
Change-Id: I3cc96c87d1fd5d1342c7f6c9438802ab30076e9e
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
This only enables compilation, it doesn't fix any test.
Qt on Android supports process, but not TEST_HELPER_INSTALLS. See also
acdd57cb for winrt.
android-ndk-r10e is used to compile, see
http://doc-snapshots.qt.io/qt5-5.11/androidgs.html .
corelib/io/{qdir,qresourceengine} need to be fixed later.
Done-with: Frederik Gladhorn <frederik.gladhorn@qt.io>
Done-with: Mårten Nordheim <marten.nordheim@qt.io>
Change-Id: I34b924c8ae5d46d6835b8f0a6606450920f4423b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
This autotest fails on Ubuntu 18.04 builds.
Task-number: QTBUG-68864
Change-Id: Ib4baa458b80eea5861e89145b85d865e9a78989c
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
This autotest fails on Ubuntu 18.04 builds.
Task-number: QTBUG-68862
Change-Id: Ib02c28ede135c9ba4303dbf0224b32b080762a31
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
It's not possible to ask for window activation on Wayland, and some Wayland
compositors—such as Weston—don't give window focus to newly created window
either.
Task-number: QTBUG-62188
Change-Id: Ibebb2a14e03127fec703d79498627fccf65b2f88
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
We move QInternalMimeData to a separate file, because this class is
used, even if draganddrop is disabled. From now on, include
qinternalmimedata_p.h instead of qdnd_p.h for QInternalMimeData.
Change-Id: I594e08e2e90d574dc445119091686b4b69e4731b
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
QDesktopWidget::screenGeometry() and similar was deprecated in 5.11
and replaced by QScreen::geometry()
Change-Id: Ic630d022bc6461af78f49684c8ac9d1836d738bc
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Windows 10 windows contain an invisible area within the NC window frame
on which the mouse cursor is enabled to perform resizing. This change
captures the geometry of the invisible margins and considers it when
moving a window, so that, for instance, a move(0,0) does not generate
gap between the window and the beginning of screen.
[ChangeLog][Windows] The dimensions of invisible margins inside the
frames of Windows 10 windows will now be disregarded in the positioning
of Qt windows to avoid a misplaced look (offset by a few pixels from
the expected position).
Task-number: QTBUG-55762
Change-Id: I1f537756eb1a093f78b919de9d44992528199700
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This way the platform window is destroyed in a timely manner, preventing
redundant close events from the window system.
Task-number: QTBUG-43344
Change-Id: Ifdfca59ceacef54405f1c227c493dc514a1b27ea
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
When a key press is received which is not spontaneous then it needs to
be manually sent as a shortcut override event to ensure that any
matching shortcut is triggered first. This enables emulation/playback
of recorded events to still have the same effect.
[ChangeLog][QtWidgets] Sending a key press event with sendEvent() now
sends a ShortCutOverride event first to the widget to trigger any
shortcuts set first.
Task-number: QTBUG-48325
Change-Id: Iafcc2cdb1773bffe89edaeb0abc44cd5a51088e6
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
[ChangeLog][QtWidgets] QApplication no longer sends a mouse move event
to the entered widget if it sends synthetic enter and leave events.
Task-number: QTBUG-67736
Change-Id: I75daaffd53f1ddc2bc4d7df67382cbc22d3eb6fc
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
This test function was removed from the blacklist as
a part of the cleanup in 2056bc6b, but is still flaky
on CI.
Change-Id: I348ed167dff6fd618ede28456ada6da86ee341cd
Reviewed-by: Paolo Angelelli <paolo.angelelli@qt.io>
Whitelist tests that pass locally and that have been
blacklisted since the BLACKLIST was introduced in
2015 (in commit a8dda3b8).
Change-Id: I777b490313ebaa6c8c8daee168487d350179a5e6
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
