Look for and load "@2x" image versions. Adjust
getPixmap/ImageSize to take the image devicePxielRatio
into account.
Use doc->documentLayout()->paintDevice() to get the
target window devicePixelRatio (like the existing
DPI-based scaling). In practice this pointer may/
will be null, fall back to qApp->devicePixelRatio
as usual.
Task-number: QTBUG-36383
Change-Id: Ib5e113b67242b5a9b3410272f2183a76a60bc773
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
ctrl + K : Cut
ctrl + Y : Paste
ctrl + F : Cursor right
ctrl + B : Cursor left
ctrl + N : Cursor down
ctrl + P : Cursor up
ctrl + V : Cursor next page
ctrl + O : Insert line separator
(ctrl as in the key, not Qt::CTRL)
These are low-priority (0) key sequences. Add them to the
end of each StandardKey range and change the priority
of an existing item to 1 where it makes sense.
Task-number: QTBUG-32837
Change-Id: Id321e6c6ad4277d729b27297a1de66c4628e4201
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Extend the unified title and toolbar gradient to
tabs in document mode that are adjacent unified
tool bars.
Change the updateMacBorderMetrics() function to
register the tab bar geometry and visibility status
with the Cocoa platform plugin. The Cocoa platform
plugin will then merge this area with other registered
areas if possible.
Add QCocoaNativeInterface::testContentBorderPosition().
This function tests whether the given point is within
the unified title and toolbar area.
Use testContentBorderPosition() in QMacStyle to enable
code paths that skips drawing the QToolBar bottom
separator line and paints the active tab background
with transparent pixels to make the background gradient
visible.
Change-Id: I2b70f9bb0c2c59af053a691a7df538f958783dab
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Add setContentBorderAreaEnabled() which us used to
enable or disable an area. Used together with
registerContentBorderArea() this allows changing the
border area geometry and enabled status independently.
Add section to the QToolBar show/hide event handler
which calls setContentBorderAreaEnabled().
Make sure QToolBar and QToolBarLayout uses the same
identifier - the QToolBar object pointer.
Rename enableContentBorderArea -> setContentBorderEnabled.
The "ContentBorder" is now the entire unified toolbar
area while "ContentBorderArea"s are the sub-areas
covered by toolbars.
Change-Id: I339f381a50856e048ae40e7ffadd6a8a510c4994
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
QMacStyle::styleHint(SH_ScrollBar_Transient) wants either a style
object or the widget argument in order to return correct values.
Change-Id: I2fdef0820334fa66e076a4734eb2a30c722c841c
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
instead of assigning plugins to the first module which claims the whole
type, try to assign it to a module which the plugin claims to extend.
as we are getting stricter in that go, somebody needs to claim the
'generic', 'platformthemes', and 'platforminputcontexts' plugin types.
the natural claimant is QtGui. however, as we don't want to auto-link
any of these plugins, make them all claim that they extend a
non-existing module.
QtGui also claims 'iconengines' plugins.
the 'printsupport' plugins are also claimed by the respective module.
Change-Id: I7af7c16089f137b8d4a4ed93d1577bd85815c87b
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
this means creating forwarding pris also for plugins.
unlike for qt modules, we don't actually populate the .PATH unless it we
are making a prefix build (and thus expecting it to be outside the
regular location).
Change-Id: Id836821cddec8d5f53d0708ae001e8eaa13cc71b
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the plugins already declare which modules they belong to.
additionally, we allow plugins to declare which modules they "extend" -
e.g., while the Quick accessibility plugin belongs to Gui's 'accessiblity'
type, it makes no sense to link it unless Quick is actually linked.
finally, it is possible to manually override the plugins which are linked
for a particular type, by setting QTPLUGIN.<type> (to '-' if no plugins
of this type should be linked at all).
Task-number: QTBUG-35195
Change-Id: I8273d167a046eb3f3c1c584dc6e3798212a2fa31
Reviewed-by: Fawzi Mohamed <fawzi.mohamed@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the effect of this is negligible, as this list is only used for
dependency scanning.
Change-Id: Iae9fc73c8633cfc8217bc90014498d9635d53ad0
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The CSS for unordered lists placed a nested list
vertically too close to its parent list item.
This commit fixes the issue.
Task-number: QTBUG-38217
Change-Id: Ia5003f2aab197f455ed5bbea2e1ee2e6475aaffe
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
The tests expect a home folder which usually is not present on QNX
Change-Id: I44f548a95f14414c0db6f752fd115696069a7b90
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
Despite supporting DH and ECDH key exchange as a client, Qt did not provide
any default parameters which prevented them being used as a server. A
future change should allow the user to control the parameters used, but
these defaults should be okay for most users.
[ChangeLog][Important Behavior Changes] Support for DH and ECDH key exchange
cipher suites when acting as an SSL server has been made possible. This
change means the you can now implement servers that offer forward-secrecy
using Qt.
Task-number: QTBUG-20666
Change-Id: I469163900e4313da9d2d0c3e1e5e47ef46320b17
Reviewed-by: Daniel Molkentin <daniel@molkentin.de>
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Nested initialization is broken before SP2, so just disable the whole
feature as tst_qvector crashes(release)/fails(debug)
Done-with: Jedrzej Nowacki
Task-number: QTBUG-38186
Change-Id: I9c5c9e55c75854fc1f05a59fab2ac7dce9b37fbb
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Change QToolBarAreaLayout::item() to return a pointer
and check return values in plug().
Task-number: QTBUG-37183
Change-Id: I7029eb9739cbe603460e87d3e5493f116bdb3a89
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
FAIL! : tst_QNetworkReply::ioPostToHttpUploadProgress() 'args.at(0).toLongLong() != sourceFile.size()' returned FALSE. ()
Task-number: QTBUG-37449
Task-number: QTBUG-24226
Change-Id: Idcc0ceac0332705b1e3a073d40fa8098bea2c9f3
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Some margines and sizeHints are DPI dependent on QNX and BlackBerry.
This patch skips two test that expect the section size to be of a
certain pixel size.
Change-Id: I7869f77fc2b623e091f53e420d1a4fdb3ec30724
Reviewed-by: Bernd Weimer <bweimer@blackberry.com>
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
"Shared objects still referenced" dlerror should actually be treated as
"for your information" only, not as an actual error.
Change-Id: Ie02bd1db0dd2dc93bb759f8b6c7e825070e17bb9
Reviewed-by: Fabian Bumberger <fbumberger@rim.com>
151cf2047a broke cross-compilation
for Android on Windows, since evdev-support was detected, but
there was no corresponding test to disable the mtdev-code in the
evdev files.
Task-number: QTBUG-38155
Change-Id: Ifb08fa1160a348ef64b970a89922e66dc6ddd263
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
offsetHi needs to be casted first before shifting.
Change-Id: I29c773dd13d5b16042629604015bbf5645fab861
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
Enabled for QToolBar to allow it to overlap OpenGL widgets when
expanding.
Task-number: QTBUG-33082
Change-Id: I76dc8da52bc04eedc6d6779c48753da100ed1c9f
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
This is not Qt style, not needed, and clutters the code, so remove
QPageSize:: qualifications where they're not needed.
Change-Id: Ia93ac9523ef43a40cf4dab3bcb383a54af666c96
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
The created page format must always be released,
even if one of the subsequent PM* functions fails.
Change-Id: If42aaeccd6bdb51ba53444f491ca2878783d0678
Reviewed-by: John Layt <jlayt@kde.org>
Fix reference counting error in QCocoaPrintDevice::
createPageSize(). "key" is accessed with a "Get"
function and should not be released. Switch from
using QCFString to a plain CFStringsRef with manual
ref counting.
Task-number: QTBUG-38023
Change-Id: I04d661bffeb5b3122b0c3c8eaaffdd1af51842fd
Reviewed-by: John Layt <jlayt@kde.org>
Added new options:
- silent to suppress the noice from ext tools, making it easier to
parse failed test cases.
- ci, to check test insignificance. Requires QMake::Project cpan
module if used.
Also added printing out results after each test as well as full
summary after test run is complete.
Task-number: QTQAINFRA-641
Change-Id: Ie5f02710a939f7526e0dd39979a0cd97ed19f55b
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
The big change is that we now keep the id objects representing accessibles
around so that they are persistent for ATs.
This improves performance of Mac accessibility significantly.
This is required for notifications which are now sent so that many things work much better,
for example the VoiceOver focus follows the keyboard focus.
The parent element in QCocoaAccessibleElement was removed, we can
dynamically access it more reliably.
Change-Id: I686d212f40d28b392dcc22f16f3c3430f08bdc98
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
The example is incorrect: no context parameter is needed.
There was also no mentioning of the fact the the context must be
current at the time of calling initializeOpenGLFunctions(). This
is corrected too.
Change-Id: If8695140096e4b4f84927579c099b0af80750703
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
This way we can customize QPlatformWindow by using
dynamic "_q_platform_" properties in corresponding
QWindow.
Change-Id: I987b7a17d252541fe766af6aa37a6cffb67f1807
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Add messages to comparisons and expect failure of blockSize()
on Windows.
Task-number: QTBUG-37822
Change-Id: Ie71d35a3d1ba0e52c93d5ba3fd7e92465b170d49
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Commit 0d4918950e added a new place
(QXcbWindow::setTransparentForMouseEvents()) where requests from the
XFixes extension are generated. However, this wasn't checking if the
extension is actually supported before using it.
Fix this by turning QXcbWindow::setTransparentForMouseEvents() into a
no-op if the XFixes extension isn't available.
This means that the window in question won't be transparent for mouse
events, but we cannot do much about that if the X server doesn't support
the required extension.
Task-number: QTBUG-38109
Change-Id: I2931481eb71bab990f2dcf0ec600b9e62d3d799c
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
-modules that use the qt-module-defaults.qdocconf have access to the
.qdocinc file.
-content about running examples can be used by example documentation.
Task-number: QTBUG-33597
Change-Id: I88d93a9982c05a24b4f7ac1b2cfb3293e56031b2
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@digia.com>
Recognize that the d-pointer can never be nullptr and drop the
nullptr checks.
The d-pointer can never be nullptr as there's no move ctor and all other
ctors create a QPageSizePrivate.
Change-Id: I6c4e165949ed55510aefbc2d933f20fc8e624333
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The old code always compared the Private classes, unless one of them
was nullptr (which it never was, as there is no move ctor and all
other ctors create a QPageLayoutPrivate.
The new code compares the dpointers, and only if they differ, the
Private classes. It also drops the nullptr checks, as they cannot
trigger.
Change-Id: I523c3503e2edb520f98f9b4e2e3bdaf28a9a355d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Better style, since it treats the left-hand and right-hand size symmetrically,
e.g. for implicit conversions.
Change-Id: Ib5d39b1ebffffcb664ee2f72c756702469e32d3b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Many setters check for an actual change before making changes to
data members, but because of QSharedDataPointer, the detach had
already happened by the time the comparison returned false.
Change-Id: I320806e74de4a64fa3a340831621c1f5120ebb0f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: John Layt <jlayt@kde.org>
This is not Qt style, not needed, and clutters the code, so remove
QPageLayout:: qualifications where they're not needed.
Change-Id: I62f90c29bcb9f3c137d319051ac79e081fe5fb69
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: John Layt <jlayt@kde.org>
Better style, since it treats the left-hand and right-hand size symmetrically,
e.g. for implicit conversions.
Change-Id: If1ffa9dc2a018e402c884f60bfbc82e799daeb92
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A QSize or QSizeF is not an accurate representation of a QPageSize, so
the corresponding constructor should be explicit.
Change-Id: I6b1808e5f93e3caef948c0e5300bd3c20e3c4210
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: John Layt <jlayt@kde.org>
This could happen in the following situation:
* a custom animation driver with fixed delta
* a triple-buffering scheme (rendering ahead a frame)
* a second animation timer starting while a first was active
This would cause QUnifiedTimer::startTimers() to trigger
QUnifiedTimer::updateAnimationTimers(-1), and use the current time from
the QElapsedTimer rather than the animation driver. This time could be
less than the last reported time from the animation driver.
Change-Id: Ibf1796fcb99f288d4946b30e5e7225695aa61781
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
