QMetaType::Void was ambiguous, it was pointing to a valid type (void)
and in the same time it was signaling errors in QMetaType. There was
no clean way to check if returned type was valid void or some
unregistered type.
This feature will be used by new QMetaObject revision which will
store type ids instead of type names. So it will be easy to
distinguish between:
void mySlot();
MyUnregisteredType mySlot();
Change-Id: I73ff097f75585a95e12df74d50c6f3141153e771
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
These tests don't have their own source code but rather reuse the
counting selftest with additional command-line options.
Note that currently the -v1 switch only changes the plain text output,
and the expected xml output is identical to that of the counting test.
This may change in the future however.
This commit also restores a couple of lists to alphabetical order, where
the findtestdata selftest was not sorted into the list correctly.
Change-Id: Ie38e255f8029157b34162b3864b5fa66e137d74a
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Otherwise metacity was crashing when a QWindow was destroyed immediately
after being activated, because metacity was trying to select events
(XSelectInput) for the already destroyed m_netWmUserTimeWindow.
Task-number: QTBUG-24492
Change-Id: Iedbe7bdd6b26110ca8bec6f33525209ae551ffd5
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Remove the -armfpa option the config.tests/unix/doubleformat*
detection. The places where we used QT_ARMFPA and Q_DOUBLE_FORMAT
has been removed as well.
Rationale: ARM FPA with GCC does not work with EABI. Qt currently
does not support compiling without EABI, making ARM FPA an
impossibility. It is unknown whether other compilers provide ARM FPA
support with EABI. Support for ARM FPA can be re-added in the future
should the need arise, but since ARM VFP is available for ARMv5 and up,
we should encourage implementors to instead use soft-floats or VFP.
Change-Id: I3671aba575118ae3e3e6d769759301c8f2f496f5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Specialise QTypeInfo<QPair<T1,T2>> based on the properties of
T1 and T2:
- If either T1 or T2 is Q_COMPLEX_TYPE, so is QPair<T1,T2>.
- Otherwise, if either T1 or T2 is Q_MOVABLE_TYPE, so is QPair<T1,T2>.
- Otherwise, QPair<T1,T2> is Q_PRIMITIVE_TYPE.
Change-Id: I8aecbd37e3b7924f77f38967498deabf1a19ca24
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Causes a new test failure in QGraphicsProxyWidget::updateAndDelete,
expand the EXPECT_FAIL to cover that one as well.
Change-Id: If9da757206445d17510c4fac82a559de7b8c0563
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
The OS provides the error string in this case.
This gives more information to the developer seeing a generic
error.
Change-Id: Ia03642982f3513ee5a8a9fa98d918e948f8d97a5
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
The test fails if MAKEFLAGS is set up for jom since the test
always uses nmake. Remove MAKEFLAGS from the process environment.
Change-Id: Idaed3cc964832b83c282a59fc5257572c520b882
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
For SSL, this would require an OpenSSL library to be installed.
Change-Id: I2a320e7faf40ef925c90dbe539f912e4a8fc13fc
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Do this regardless of whether the event subclass
is public API or only used in examples. Examples
are examples, used by others as templates or even
copied verbatim, so they should also follow sound
engineering rules.
Anyway, there's only one in examples/...
Change-Id: I586ff16407a956c9e89288fdd4377eed73f45c0f
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
- It was trying to install syslocaleapp sub program as TESTDATA
instead of an application.
Change-Id: I2117d11335bc2fd37a8ccc9a03b0337382f0177f
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- Changed remove() test to check the file just removed is gone.
Change-Id: I0b6c176e624134402b5547866064f436ce063f16
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- Added install of app sub program so it works from install directory
Change-Id: Ia83643519752a3cbb59d6da2aed132d683a94bee
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- subtest not valid if run as root so added a check and skip
Change-Id: Iae993e20f272f9303a75062ef00d22b49df5e84a
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Those escape sequences have a special meaning in the XML Schema 1.1
regular expressions, but not in Perl-compatible ones.
An escape sequence that has no special meaning should match the
escaped character itself; this patch fixes QRegExp's behaviour in
that regard (previously, it added a character class matching
nothing).
Change-Id: I983f923baa7c2ec19938b96353f3a205e6c06d58
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Windows unhelpfully writes to only one byte of the output buffer
when getsockopt is called for a boolean option. Therefore we have
to zero initialise the int rather than initialising to -1 as was
done before.
This in general only works for little endian architecture, because
the word would look like 0x01000000 on big endian. So I have added
some compile time asserts in the assumption that windows is always
little endian. This is ok for comparisons with 0/false, but not
comparisons with true or nonzero values.
In the case of IPV6_V6ONLY, it is documented as DWORD (unsigned int)
but on some windows versions it is returned as a boolean triggering
the warning. I removed the warning, as the conversion to int works on
both LE and BE since it is only compared with zero.
Task-number: QTBUG-23488
Change-Id: I3c586d1ada76465fc045a82661f289920c657a4c
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
I originally tried to put Q_DECLARE_TYPEINFOs into
Q_DECLARE_OPERATORS_FOR_FLAGS, to declare not only
the flags type, but also the underlying enum as
primitive, but too many users (arguably correctly)
used Q_DECLARE_OPERATORS_FOR_FLAGS at (non-global)
namespace scope where QTypeInfo would have been
specialised in the wrong namespace.
So specialise QTypeInfo for QFlags<T> only.
Change-Id: I4af6e29aefbd9460a3d2bc6405f03cdf6b1096bc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
It's not faster under _any_ metric than the new algorithm, and it loses a lot of
spread which is a bad thing.
Change-Id: Ic87258f1c887822ffea1cb1517355564fabc3c26
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
We must do this the same way we do all other hash algorithms for fair
comparison, as otherwise, the call to the PLT unfairly penalises
QHash<QString>'s results, as it's in a different shared object.
Change-Id: I69c891f5a97dcccdfcfbdbf32796f86242a42963
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Per the comments on Ie4100a1ca4dbe7bf1cd73de883a9854377ac2f5e, having Q_ASSERT
was not a good idea, and data functions can't really handle
QVERIFY/QCOMPARE/etc, so do this in initTestCase instead.
Change-Id: I19e61dec7fe415bb1fa0f53a2920d99b8c7c8ea7
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Similar to the UUID benchmark, but won't have any non-numerical characters.
Change-Id: I7487c97cab96fd53c180fe12061e7be3ca96e883
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
This attempts to emulate a dictionary usecase of sorts, done in code to avoid
bloating the git repository by adding an actual word list.
Change-Id: I878bc4af8877ba780ee699932f240c0d9c8ff12c
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
For some reason, hiding files via executing "attrib +h filename"
process didn't work realiably, so changed the file hiding to be done
via Windows native API.
Also changed the test to use QTemporaryDir to simplify temporary
directory handling a bit.
Task-number: QTBUG-24291
Change-Id: I4f02b16e2f9105bcf5e6c5bf136f55434a26e2f4
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Only test code change, we already have the correct behaviour
Task-number: QTBUG-20001
Change-Id: I2296f405f47f9c8d15796e69f9d1854063e38d6a
Reviewed-by: Richard J. Moore <rich@kde.org>
This made sense only for Symbian where there was a special
CFbsBitmap-based backend present and it was used from the
Symbian-specific VG and GL pixmap implementations.
The generic version is merely a useless wrapper over QImage and is not
in use anywhere in the codebase.
Change-Id: I1dabe22dfb8cbbc35dce8e22703a3aff810fb5f9
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
- Use temporary directories to avoid instabilities
due to remains of previous failed tests and locked
directories.
- Replace SRCDIR by QFINDTESTDATA(), reference only
the freedesktop.org.xml contained in the Qt source
tree by $$QT.corelib.sources.
- Improve some error messages, test suite instructions
for Windows.
Change-Id: Idee8e3767ef0a8299df3bdaaac20334164878db0
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: David Faure <faure@kde.org>
This is meant to reduce the number of allocations on growing containers.
It serves the same purpose as the existing qAllocMore which is currently
used by container classes.
While only a container knows when it is growing, it doesn't need to care
how that information is used. qAllocMore is currently treated as a
black-box and its result is (basically) forwarded blindly to an allocate
function. In that respect, container code using qAllocMore acts as an
intermediary.
By merging that functionality in the allocate function itself we offer
the same benefits without the intermediaries, allowing for simpler code
and centralized decisions on memory allocation.
Once all users of qAllocMore get ported to QArrayData and
QArrayData::allocate, qAllocMore can be moved or more closely integrated
into qarraydata.cpp and qtools_p.h can be dropped.
Change-Id: I4c09bf7df274b45c399082fc7113a18e4641c5f0
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Adapts QDBusMetaObject to be in sync with the moc/meta-object
changes for property and method descriptors (storing the name and
argument count of methods, and more elaborate type information).
Now that the method name is stored in the standard method
descriptor, QtDBus doesn't need to store it separately anymore,
and the QMetaObjectPrivate::rawStringData() function can be
removed.
Change-Id: I04efdbe05b52bbd85405e1713509e55308ac42da
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This function matches QMetaMethod::parameterTypes().
The implementation of QMetaMethod::parameterTypes() was moved to a
helper function in QMetaObjectPrivate, so that it can be shared with
QMetaMethodBuilder.
Change-Id: I4361713996dc4ea31a79c2fc74c813ee5e9c3069
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
This commit introduces two significant changes to the meta-object
data format:
1) Meta-type information (QMetaType type/name) information is
stored directly in the meta-data for both properties and methods;
2) The original signature (string) of a method is no longer stored
in the meta-data, since it can be reconstructed from the method
name and parameter type info.
The motivation for this change is to enable direct access to method
names and type information (avoiding string-based lookup for types
if possible), since that's typically the information language
bindings (e.g. QML) need. (moc already had all the desired
information about methods, but it threw it away!)
This change keeps support for the older (6 and below) meta-object
revisions, but the support will be removed after a short grace
period.
The following public QMetaMethod functions have been added:
name() : QByteArray
returnType() : int
parameterCount() : int
parameterType(int index) : int
The following internal QMetaMethod function has been added:
getParameterTypes(int *types) : void
This commit extends the meta-method data to include explicit
type/name data for methods. The new data follows the existing
(5-word) method descriptors in the meta-data. The method descriptor
format was modified to enable this. First, the descriptor now
contains the meta-data index where the method's type/name information
can be found. Second, the descriptor contains the number of
parameters. Third, the descriptor has a reference to the name of the
method, not the full signature.
Each entry of a method's type/name array contains either the type id
(if it could be determined at meta-object definition time), or a
reference to the name of the type (so that the type id can be
resolved at runtime).
Lastly, instead of storing the method parameter names as a
comma-separated list that needs to be parsed at runtime (which was
how it was done prior to this commit), the names are now stored as
separate entries in the meta-object string table, and their indexes
are stored immediately after the method type info array. Hence,
parameter names can be queried through the public API without
parsing/allocating/copying, too.
Task-number: QTBUG-24154
Change-Id: Idb7ab81f12d4bfd658b74e18a0fce594f580cba3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
In Qt5 the meta-data format will be changed to not store the
method signature string explicitly; the signature will be
reconstructed on demand from the method name and parameter type
information.
The QMetaMethod::signature() method returns a const char pointer.
Changing the return type to QByteArray can lead to silent bugs due to
the implicit conversion to char *. Even though it's a source-
incompatible change, it's therefore better to introduce a new
function, methodSignature(), and remove the old signature().
Task-number: QTBUG-24154
Change-Id: Ib3579dedd27a3c7c8914d5f1b231947be2cf4027
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Up to and including meta-object revision 6, string data have been
stored as 0-terminated C-style strings, that were made directly
accessible as const char pointers through the public API
(QMetaMethod and friends).
This commit changes moc to generate an array of QByteArrayData
instead, and adapts the QObject kernel accordingly.
Generating an array of QByteArrayData (byte array literals)
means that the strings can now be returned from public (or private)
API as QByteArrays, rather than const char *, with zero allocation or
copying. Also, the string length is now computed at compile time
(it's part of the QByteArrayData).
This commit only changes the internal representation, and does
not affect existing public API. The actual (C) string data that the
byte array literals reference still consists of zero-terminated
strings. The benefit of having the QByteArrayData array will only
become apparent in the upcoming meta-object data format change, which
changes the format of property and method descriptors.
Support for the old meta-object string data format was kept; the
codepaths for old revisions (6 and below) will be removed in a
separate commit, once all the other meta-object changes are done and
affected code has been adapted accordingly.
Task-number: QTBUG-24154
Change-Id: I4ec3b363bbc31b8192e5d8915ef091c442c2efad
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
The private git history shows that the test program associated with this
data file was missing from the original commit and was never
subsequently added.
Change-Id: I3401724ac04168158a48eb06436db83d3557711f
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- Skip the failing windowsDefaultLocale() test.
- Improve the handling of the subprocess, locate
the binary in initTestCase instead of repeatedly searching it.
- Make all applications console/non-app bundles.
Task-number: QTBUG-24543
Change-Id: I79dfaa3320cd5698f02e74a3fe53477d4a79d4fb
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
The libraries were built into wrong directory in Windows. Fixed it so
that the libraries are built into debug and release directories like
the test executable.
Also fixed QMAKE_CLEAN statement, which was using incorrect separator.
Task-number: QTBUG-24151
Change-Id: Iade656af5f83ef2b79c2b9c4177df4a16b2f6821
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
moc is currently generating code to convert from a pointer to member
function of a slot or signal to its index.
The idea was that it could be usefull for slots to have the new syntax
do the same as the old one (connecting signal index to slot index). But
in practice, the new syntax do not use the IndexOfMethod for slots.
Also, it does not work for all the slots (no Q_PRIVATE_SLOT,
no static slots)
So since it is not used, and that it would take room in the binaries to
generate all the code to get the index of slots, we remove it.
If ever we need it, we can still add it later.
Change-Id: Ia417e3e524d7915ca86433ea86c66ac2b299c81a
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Previously the silent logging mode suppressed passes, skips and internal
testlib info messages, but did not suppress debugging output, making it
hard to see the fails in a noisy test. This commit changes silent mode
so that it suppresses all output except test failures and fatal errors,
making silent mode truly useful for seeing just the important test
output.
This commit also adds a selftest to verify the behaviour of silent mode.
Change-Id: I75420aead03682306210746a87e2a3b608b58fc6
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This adds Sha224, Sha256, Sha384, and Sha512 enum values to
QCryptographicHash::Algorithm. The implementation comes from RFC 6234,
http://tools.ietf.org/html/rfc6234, which is added to
src/3rdparty/rfc6234. Only the headers and SHA-2 code is included in
src/3rdparty/rfc6234 (the SHA1, HMAC, and HKDF code is not included).
Change-Id: I85139fd118291f15efc22899a5ddd1cc83810cfb
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
it did the same cleanup() did, and they are always called consecutively
anyway (except at start and end where it does not matter).
Change-Id: I4c82024d19d6c670f1f4037d43147a15680614ae
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
we want to call it even if the test fails
Change-Id: Ie8f3f9d2df5d52990d6b9f9a632e49826278175a
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this allows us to temporarily set some extra args without (incorrectly)
instantiating a second TestCompiler (and on the way relying on $PATH for
finding qmake).
Change-Id: Icce5bf7314148ddbe705606f77a26e3362b31f67
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Clear away Q_WS_WIN/Q_WS_X11 from QMenu. Using the hint returned by the
QPlatformTheme.
Task-number: QTBUG-24325
Change-Id: Iaa4da26c74273d7cfc1fbec6519c52d09e10f7bb
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
tst_qclipboard.cpp still has Q_WS_WIN which must be clear away. After
clean up, auto test will fail under windows: When setMimeData() is
called, dataChanged() signal will be emited twice.
The solution for QTBUG-24184 has partially solved the problem, but it
still there. Make sure emitChanged() only called by QPlatformClipboard
will give our more control for this.
Task-number: QTBUG-24484
Change-Id: I23566c6d3b32828b6865234c311af3635fe9e299
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
- Create subdirectories containing profiles to avoid
problems with -fast.
- Use QFINDTESTDATA to locate binary.
- Make it a console application, no Mac-bundle.
- Add error messages to the test, give it a longer time-out
and ensure sub-process is killed if it hangs.
Change-Id: Ibc177b786c4bc8fdbc068a8c45f4801a41c9f660
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Fixes a crash when invoking various QRegExp methods on an object
*before* doing any match. For instance fixes:
QRegExp re;
re.matchedLength(); // crash
Task-number: QTBUG-23352
Change-Id: I9c239ff790a139c7820ef1aeced89d31320ae6b0
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reusing a template is much better then creating a new one, even if it
should inline the same code.
For some reason replacing T* by void* force gcc to remove a few bytes
per template instantiation too, it is not really significant, but it
alows us to simplify the code.
Benchmarks don't show any regressions.
Change-Id: I4fdf1e4dc311b23021eb5758605602937d05b183
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QVariant::Type is marked as obsolete. It is not possible to get rid of
it completely, in a source compatible way, but at least we can remove it
safely from a method arguments list.
Change-Id: I26b58099bfa6d32f3a583a8ae0047f0bb36bcd0d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Allow moc to produce the desired identifiers when used with C++
symbol names that have been redefined, for example by -Dfoo=bar.
Two changes are required: firstly, when encoding a type name, the
components of the name must be checked for substitutions that have been
defined for that token (note that this is not done here by correct
pre-processing, but only by processing the resultant table of
definitions). Secondly, the arguments to the SIGNAL, SLOT and METHOD
macros must be allowed to be substituted during macro expansion rather
than stringized directly.
This is a temporary change to prevent breaking existing projects
that depend on the declarative module. After clients have had an
opportunity to update their code to the use the new interfaces,
it can be removed.
Task-number: QTBUG-23737
Change-Id: I39e6844cebf6ca7984af6028160b8a3797ac44a5
Reviewed-by: Martin Jones <martin.jones@nokia.com>
These function are marked as obsolete since Qt 4.3
The motivation here was too fix QPixmap::serialNumber which is marked as
QT_DEPRECATED_SINCE but was not inlined.
But then I took the oportunity to do the same with all the other
functions.
Change-Id: Ic50a7857461fc402b2f2b4528c83e53e8e28ea30
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
- Fix key handling in QWidgetLineControl according to
the keyboard scheme returned by the QPlatformTheme,
remove #ifdefs.
- Do the same in the test.
Task-number: QTBUG-21402
Change-Id: I36d836584e7122309061af72819a4147cadd0a74
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
It might be silly to have sections with size 0 without using hideSection.
Nevertheless we should still use the principle of least surprise.
It does not make sense that hiding a row 'far' away should affect
the semantics of setOffsetToSectionPosition on lower indexes.
Change-Id: Iaf847eba2ea4d28fc7bcfe3a27d62f432f6f61e0
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Support pixel-based deltas as well as sending
dx and dy values in the same event. Keep source and
behavior compatibility with Qt 4.
New API:
QPoint pixelDelta() const
QPoint angleDelta() const
Deprecate delta() and orientation().
Both pixel-based deltas and combined updates are
necessary for smooth trackpad-based scrolling on
OS X.
Qt 4 compatible behavior is achieved by sending an
extra wheel event in cases where the initial event
has a combined dx and dy update. This extra event
sends dx in delta() and orientation(), with pixelDelta()
and angleDelta() set to null.
Modify the Cocoa implementation to provide pixel
deltas. It is expected that not all platforms can
provide these. Angle deltas will always be available.
Change-Id: I20c10f0df338ddcd6a3f7a4d40949ed5ae3b4795
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
The meta-object format is going to change for Qt5. Use QMOB to
insulate the badxml test from such changes.
(It just so happens that the QFAIL("a failure") statement is still on
line 109 after the refactoring, so the expected_badxml.* files'
location tags did not have to be changed.)
Change-Id: I04421d13c4df71c8004fa71cafc4823a59079a41
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
(cherry picked from commit 12520e8300)
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
The code coverage tool adds #line when instrumenting the code using the gcc
syntax.
Since tst_headersclean now uses the -pedantic-errors flag (qtbase commit
7e970eb58c), it causes a fatal error when the code is
instrumented with the coverage tool.
Change-Id: Icb1888d1c1f0a982c0c56aa168e70a76a246a18c
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
remove "header" and assignmets which are defaults or bogus,
reorder some assignments.
Change-Id: I67403872168c890ca3b696753ceb01c605d19be7
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This commit reverts partly 7401832a7d
There is something wrong with DummyWindow/XCB/Metacity, Metacity
crashes quite often when QWindow is activated.
Change-Id: I611af2678814f41c941cb697054135f561a77878
Reviewed-by: Joona Petrell <joona.t.petrell@nokia.com>
Change-Id: Iff8b9bdd4b069721103e1cd5854e56b6116d7549
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Many languages use a fullstop to indicate an abbreviation, making the
fullstop part of the word. For languages like thai, it is required to
pass the fullstop along for correct word breaking.
Change-Id: I5ad0ddbc66ea96e08913446dad8fd3c5d5dd0905
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
Thai is not supposed to have ZWJ and ZWNJ characters or any other of the
Inherited Unicode Scripts
(http://www.verisigninc.com/assets/idn-inherited-unicode-script.pdf)
- they don't have a mapping to the thai encoding tis620 which libthai
requires. However it is an unfortunate fact that there are many websites
etc that liberally place these ZWJ and ZWNJ characters throughout thai text
to force word boundaries, so we must also deal with them.
We deal with all Inherited characters by mapping them to the invalid code ~0
in tis620 encoding, following what libthai does internally in its own tis620
encoding functions, and then replacing this character with the original
unicode and setting dontPrint to true to hide the ZWJ and ZWNJ
characters.
Includes a unit test to check the behaviour.
Change-Id: I1ee8388b650cb5fc61bcb265efb9843c73f327ac
Reviewed-by: Adrian Yanes <ext-adrian.yanes@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
Since we would add 1 to the height of script lines in the layout before
and there was no compensation for this in the box font engine, which is
used by this test, the selection rect in the test images was one pixel too
high. Now that the +1 has been removed from the height, the images have to
be updated.
Change-Id: Ic9ea0ace6b61be496846c7f757ae309756cd9f5f
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
If QMainWindow::restoreState() then QWidget::setStylesheet() were called
before the QMainWindow is shown, the size of QDockWidget can not be
restored.
QWidget::setStylesheet() will generate QEvent::StyleChange event, which will
cause the function QDockAreaLayout::fitLayout() to be called before the layout
of MainWindow is activated. Although the state info has been stored in
a QMainWindowLayoutState variable by QMainWindow::restoreState(), but
QMainWindowLayout::setGeometry() still isn't called at present. So
QDockAreaLayout::fitLayout() will force the size of dockwidgets
and centralwidget to be calculated using the wrong geometry, which will
break the state restored by QMainWindow::restoreState().
This is a side effect of 692e9103ebb85b90e79377206d5d03b704d43d42.
Task-number: QTBUG-15080
Change-Id: I8cda6a529d178f7467a59b780db80df0a44d4769
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Use QRectF consistently to avoid the rounding done in the conversion
to QRect.
Task-number: QTBUG-24463
Change-Id: If9ea858ebabf8c449ea058b9d379d4a57cb6c82d
Reviewed-by: Joona Petrell <joona.t.petrell@nokia.com>
- Replace Q_WS_WIN with Q_OS_WIN
- Remove useless #ifdef Q_OS_WINCE which located in another #ifdef
Q_OS_WINCE
Change-Id: I6279b6d74902ab3ca6bdb7292c2936a76e3e6952
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
When configuring with -fast on Windows, a directory which contains two
.pro files, one SUBDIRS and one not, will have the SUBDIRS Makefile
silently clobbered by the non-SUBDIRS Makefile. In practice, this may
cause various subdirectories to be silently excluded from the build.
Rearrange .pro files for this test to avoid triggering this bug.
See also e9015b3bc8.
Task-number: QTBUG-21168
Change-Id: I18fac1ac636fdc6b2aaee1b4cdfee9c4bc2a77ff
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The new layout matches that of QByteArrayData and QStringData, except
for offset which is measured from the beginning of QVectorData, whereas
in those classes it (still?) references the end of the header data.
The new layout uses an extra member for storing an offset into the data,
which will allow introducing QVector::fromRawData, similar to the same
functionality already existing in QString and QByteArray.
By not using an actual array to index array members, we also steer clear
of GCC bug #43247:
http://gcc.gnu.org/bugzilla/show_bug.cgi?id=43247
Change-Id: I408915aacadf616b4633bbbf5cae1fc19e415087
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This setting is extremely harmful, as code cannot know whether or not to expect
it. It also made the behaviour of QString::fromAscii and ::toAscii unintuitive,
and caused a lot of people to make mistakes with it.
Change-Id: I2f429fa7ef93bd75bb93a7f64c56db15b7283388
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
- Fix warning: "Character represented by universal-character-name
'\uFFFF' cannot be represented in the current code page (1252).
- Fix character conversion
- Change source file to plain ASCII, add defines for special
characters.
Change-Id: I8557e6ba7488f746247f0d78181f14bfb7d5aaae
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
It used to be an index into the first element in 'd' that came after
'offset'. It is now the byte offset from the beginning of the
QStringData structure.
By no longer using an actual array to access characters, we also steer
clear of GCC bug #43247:
http://gcc.gnu.org/bugzilla/show_bug.cgi?id=43247
This aligns this data structure with QArrayData. The intention is to
have QVector, QString and QByteArray share the same memory layout and
possibly code.
Change-Id: I4850813e1bd47c3cb670c50c9a8ccc1bff2e8597
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When configuring with -fast on Windows, a directory which contains two
.pro files, one SUBDIRS and one not, will have the SUBDIRS Makefile
silently clobbered by the non-SUBDIRS Makefile. In practice, this may
cause various subdirectories to be silently excluded from the build.
Rearrange .pro files for this test to avoid triggering this bug.
Task-number: QTBUG-21168
Change-Id: Ic51941db497d7b8fb004f3c50f5ea24d90ff3114
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
I can't figure this one out, but it seems to be a clang compiler bug
that is triggered in association with -DQT_NO_DEBUG. Changing the
test from QVERIFY to QCOMPARE keeps the intent and the check, but makes
the failure go away.
It can't hurt...
Change-Id: Ib34e5e850e5b731d729e417430dec55e372805ac
Reviewed-by: Chris Adams <christopher.adams@nokia.com>
This abstraction imposed serious performance penalties and is being
dropped from the public API.
In particular, by allowing file names to be arbitrarily hijacked by
different file engines, and requiring engines to be instantiated in
order to decide, it imposed unnecessary overhead on all file operations.
Another flaw in the design with direct impact on performance is how
engines have no way to provide (or retain) additional information
obtained when querying the filesystem. In many places this has meant
repeated operations on the file system, where useful information is
immediately discarded to be queried again subsequently.
For Qt 4.8 a major refactoring of the code base took place to allow
bypassing the file-engine abstraction in select places, with
considerable performance gains observed. In Qt 5 it is expected we'll be
able to take this further, reaping even more benefits, but the
abstraction has to go.
[Dropping this now does not preclude that virtual file systems make an
appearance in Qt at a later point in Qt 5's lifecycle. Hopefully with a
new and improved abstraction.]
Forward declarations for QFileExtension(Result) were dropped, as the
classes were never used or defined.
Tests using "internalized" classes will only fully run on developer
builds. QFSFileEngine was removed altogether from exception safety test,
as it isn't its intent to test internal API.
Change-Id: Ie910e6c2628be202ea9e05366b091d6d529b246b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
