The test expects all the files to reside in the file system,
both for loading the runtime resources and for comparisons.
Since we can't deploy directly to the file system on Android,
we go via qrc and extract the files on startup instead.
Change-Id: I17ff8985cb17dbfc45f0fb692ca46558bb5c5cdc
Reviewed-by: BogDan Vatra <bogdan@kde.org>
Somehow, it doesn't shrink with btrfs, even if you write 1 MB of non-
null data. This does not seem to be a bug in QStorageInfo. strace
confirms that there is a second statvfs call happening.
Change-Id: I9ed99d27d25e191916278e6b8faeae132469fc63
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Convert a Windows-specific WebDAV specification
"//host@SSL/path" into URL's with scheme set to
"webdavs" and back to local file (Windows only).
Task-number: QTBUG-42346
Change-Id: I12663243848ea7b2d3f208743e837e9de14a93eb
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If we detect a utf8 BOM mark at the beginning of the .ini
file, skip the marker and set the iniCodec to utf8.
Task-number: QTBUG-23381
Change-Id: I1b37fc4f1638a48e4f3ee71ab165e2989bc592f1
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
At 4GiB the CI test system still spends a considerable
amount of time testing this. Tune the size down to
16 MiB.
Change-Id: I417aa6829fcc734e5de4d7d34e503190f6b291e5
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
[ChangeLog][Important behavior changes][QSettings]
QSettings::value() now returns an invalid QVariant
when passing an empty key. The code path ran into
an assert, which was only noticeable in debug
builds.
Task-number: QTBUG-41812
Change-Id: I5cc32be3aa267a132e9d6639ecd6cb0bbafc15b0
Reviewed-by: Stéphane Fabry, Cutesoft <stephane.fabry@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Tracking the file, line, function means the information has to be stored
in the binaries, enlarging the size. It also might be a surprise to some
commercial customers that their internal file & function names are
'leaked'. Therefore we enable it for debug builds only.
[ChangeLog][QtCore][Logging] File, line, function information are not
recorded anymore for logging statements in release builds. Set
QT_MESSAGELOGCONTEXT explicitly to enable recording in all configurations.
Change-Id: I454bdb42bcf5b5a8de6507f29f2a61109dca9b91
Reviewed-by: Fawzi Mohamed <fawzi.mohamed@digia.com>
Reviewed-by: Alex Blasche <alexander.blasche@digia.com>
IPv6 addresses can start with ":", for which QDir::isAbsolute() would
always return true (QResourceFileEngine::isRelativePath() returns
constant false) and would trip the calculation for local files.
Similarly, IPv6 addresses can start with strings that look like Windows
drives: "a:", "b:", "c:", "d:", "e:" and "f:" (though not today, as
those address blocks are unassigned). Since a valid IPv6 address will
definitely require at least one more colon and Windows file names cannot
contain ':', there's no ambiguity: a valid IPv6 address is never a valid
file on Windows.
This resolves the ambiguity in favor of IPv6 for Unix filenames (which
can contain a colon) and in case of an URL containing scheme, relative
path and no authority ("dead:beef::" for example could have been parsed
as scheme() == "dead" and path() == "beef::").
Task-number: QTBUG-41089
Change-Id: Id9119af1acf8a75a786519af3b48b4ca3dbf3719
Reviewed-by: David Faure <david.faure@kdab.com>
There were several use cases that did not work with the old
implementation and it was not really readable.
Task-number: QTBUG-3472
Task-number: QTBUG-40067
Task-number: QTBUG-23892
Change-Id: I1e038792dc54cdc6f8d9bb59d80b11dd3c56fac6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This was done wrong when using the ini format.
Task-number: QTBUG-22461
Change-Id: Ib9390460bce6138659cceac7e3cd25339ba5e9bb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A "sharing violation" happens when trying to delete the lock file and another
thread/process is reading it at that very moment. Detect the error and try again,
up to 10000 times - to avoid an infinite loop if QFile::remove fails for another
reason such as a sudden change of permissions preventing us from deleting our
own lock file.
On Unix the deletion can't fail because of readers, but it doesn't hurt
to check the return value there too, to catch other reasons for failures
such as a sudden permission change.
Task-number: QTBUG-38853
Change-Id: Icf12a74faed4a4916e3427abc09d9c33aa141476
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
WinRT is a sanboxed environment, hence files can only be created in
some writable location.
For some tests we reset the current directory to minimize the required
changes. We cannot do this for the application lifetime as the test
also has cases where it reads files relative to the executable inside
the sandbox.
Change-Id: Ib9d37c8cffd191f0d1055f835c11d10887923378
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
If we write to a file, its size changes. We should drop previous size
caches.
Change-Id: Ib687c91e5fc88cab588c89023f23da9622160da9
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Allows to retrieve information about mounted volumes such as label,
total/available size, filesystem type and so on.
Possible use cases are:
- allows to do checks about filesystem before performing actual
operation (such as available/maximum volume size)
- allows to retrive information about volume that can be shown in file
dialogs
- allows to retrieve volume for specific path and check if two or more
paths belong to the same volume or not
[ChangeLog][QtCore] Added QStorageInfo class to retrive information
about mounted volumes and drives
Change-Id: Ibf9c2e6b53ef39c5605894a4422acdbbca4030c4
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
WinRT stores settings inside the app bundle, not in the registry.
Some tests are not fully functional due to errors in the file
implementation (See QTBUG-40588).
QSettings::SystemScope translates to a roaming container on WinRT,
meaning that settings stored inside there should be uploaded and
shared among devices. However, this is untested so far.
The tests have been updated for those platforms which do not store
the order of keys. This has been done on some locations only so
far, but needed to be done on more places for WinRT.
Task-number: QTBUG-33498
Change-Id: Ifd0194387b09c220d31812b4b6fd0ce9a7d84d24
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
Use the built-in hex, showbase manipulator to format the number in
hex. Also, apply nospace() only once.
Change-Id: Id4b3d5f082ad13f52c8711408d7ec609bec3a621
Reviewed-by: Alex Blasche <alexander.blasche@digia.com>
This is much more useful than the URL "file:", it allows to use
"empty path" and "empty URL" for the same meaning (e.g. not set).
QFileDialog actually uses "file:" though, as the URL for the
"My Computer" item in the sidebar. This patch preserves that.
[ChangeLog][QtCore][QUrl] QUrl::fromLocalFile now returns an empty URL
if the input string is empty.
Change-Id: Ib5ce1a3cdf5f229368e5bcd83c62c1d1ac9f8a17
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The old unix locking code is no longer working on unix since it locks on
a file descriptor, but QSaveFile creates a new file, and as a result we
get the lock on the wrong file. Also there is no need to keep the lock
held only for reading as QSaveFile is atomic. It just needs to be held
when doing a read before writing.
As a result, since we don't hold the same lock, there could be a race
with an application running an older version of Qt if they are writing
on the same configuration file.
[ChangeLog][QtCore][QSettings] Fixed data loss while writing the config
to the disk fails.
[ChangeLog][Important behavior changes] The locking mechanism inside
QSettings has changed and is no longer compatible with the one of
previous versions of Qt. There might be corruption if two applications
running different versions of Qt are writing to the same config file
at the same time. You must also now have write permissions in the
directory containing the settings file in order to write settings
Task-number: QTBUG-21739
Change-Id: I0844a5e96c8bc1e1222a3dac6cc48170ca77fe1b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The default in QTextStream is to use the C locale, so default
QTextStream are not affected. When you set a QLocale on it, the default
was to use group separators (which is the QLocale default too). This
commit makes QTextStream respect a QLocale in which the
OmitGroupSeparators option had been set.
Task-number: QTBUG-39956
Change-Id: I00fbe12fca7f0287c7217deb487ded6582a03b52
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Allow to alter the default configuration for categories by passing a
message type: All message types with lower severity are disabled in this
category.
This is useful for libraries, which shouldn't mess with the category
registry itself: Setting rules, a category filter ... might cause
conflicts and ordering problems, so this API should be reserved to the
specific application.
For the Qt categories, we have code in the default category filter that
disables the 'debug' category. However, this is hardcoded, and there's no
way so far for other libraries to get the same behavior. With this patch
one can get the same behavior:
Q_LOGGING_CATEGORY(DRIVER_USB_EVENTS, "driver.usb.events", QtWarningMsg);
[ChangeLog][QtCore][Logging] Added QtMsgType argument to QLoggingCategory
constructor and Q_LOGGING_CATEGORY macro that controls the default
category configuration.
Change-Id: Ib2902f755f9f7285d79888ec30e8f3cef95ae628
Reviewed-by: Alex Blasche <alexander.blasche@digia.com>
~QDebug() removes any trailing space if autoInsertSpaces() is true.
However, if one uses QDebugStateSaver the global autoInsertSpaces might
be false, but a space was added by a custom operator<<.
Explicitly check for this in QDebugStateSaverPrivate::restoreState. Remove
any trailing space if the local state asks for adding trailing spaces, but
the original one doesn't. Add a trailing space if the local state doesn't
ask for one, but the global state does.
Change-Id: I243b5c76d5ed2c1ec4820da35ab6e254da1551d9
Reviewed-by: David Faure <david.faure@kdab.com>
Passing this flag to QFileDevice::map() will allow writes to the mapped memory
without modifying the file that was mapped. These writes will be lost when the
memory is unmapped.
Change-Id: I7d46b044fc370585de8c06fdb4059f1f1be12d7d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This was prompted by https://git.reviewboard.kde.org/r/119221
Change-Id: Ia148f07f6d711df533693918bbedfa5e7dc02cd5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Similar to QTextStream::reset(), this resets the stream format to the
defaults. Its primary use is inside custom operator<< implementations,
where you'd want to have a fixed format regardless of the current
stream state.
Change-Id: I421d76c61f164579bb90cf4195cc5376e2dcf0f3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Allow the user to disable the quoting of QString, QByteArray,
QStringLiteral by passing a "noquote()" stream modifier.
This requires another flag to be added to QDebug::Stream. To
keep BC we're using the QMessageLogContext::version field
to differentiate between QDebug streams created by earlier
versions.
Task-number: QTBUG-37146
Change-Id: I9b215eabfcfd754af16ea87f3ef928d698e37d77
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Check result in initTestData().
Previously, QFINDTESTDATA() was repeatedly invoked in init(). The
data-driven cd() test then failed when invoked stand-alone since
cd_data(), which relies on the data path, is executed before init().
Task-number: QTBUG-40067
Change-Id: I91039247e8dcaedd92fa990f1b5f82bc54b17c60
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Like for integers, this is activated only on QLocales other than C.
[ChangeLog][QtCore][QTextStream] QTextStream now uses group separators
when writing floating-point numbers when the locale is not the C locale.
The old behavior can be restored by setting QLocale::OmitGroupSeparator
on the locale.
Change-Id: Ie451b91017746c3a9b11b6211b2ddd09cd295cd2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Factor out code to clear all mappings into
QFSFileEnginePrivate::unmapAll() and call that
from QTemporaryFile.
Task-number: QTBUG-39976
Change-Id: Ic1ceeba0ba4451866f1081fee430e5c458c0819d
Reviewed-by: Jonathan Liu <net147@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The combination of these unstable tests makes it very
hard to get changes through the CI system due to the
unrelated test failures.
Skip the following test functions:
tst_QIODevice::unget QTBUG-39983 (Mac)
tst_QThreadPool:expiryTimeoutRace QTBUG-3786 (Windows)
tst_QLocalSocket::processConnection QTBUG-39986 (Mac)
tst_QTcpServer::adressReusable QTBUG-39985 (Linux)
Change-Id: I96559bea0d437fd25966b6ccac1ece1490e06241
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
The setting of (static) messageHandler to qDefaultMessageHandler if null
was happening in multiple threads simultaneously, so it needs synchronization.
Used an atomic pointer in case qInstallMessageHandler is called from a thread,
but more importantly, initialized the static vars right away.
Improve auto test to ensure that qInstallMessageHandler(0) still sets the
default message handler.
Change-Id: I70335af38c1d28a1cdba1df8a79c6006f227422e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Conflicts:
mkspecs/qnx-x86-qcc/qplatformdefs.h
src/corelib/global/qglobal.h
src/network/socket/qnativesocketengine_winrt.cpp
src/plugins/platforms/android/androidjniaccessibility.cpp
src/plugins/platforms/windows/qwindowswindow.cpp
Manually adjusted:
mkspecs/qnx-armle-v7-qcc/qplatformdefs.h
to include 9ce697f2d5
Thanks goes to Sergio for the qnx mkspecs adjustments.
Change-Id: I53b1fd6bc5bc884e5ee2c2b84975f58171a1cb8e
setEnabled() would race with isEnabled()/isDebugEnabled()/etc.
Change-Id: I2004cba81d5417a634b97f5c2f98d3a4ab71770d
Reviewed-by: David Faure <david.faure@kdab.com>
On Unix systems where the GUI event dispatcher uses a notification
system for socket notifiers that is out of band compared to select(),
it's possible for the QSocketNotifier to activate after the pipe has
been read from. When that happened, the ioctl(2) call with FIONREAD
might return 0 bytes available, which we interpreted to mean EOF.
Instead of doing that, always try to read at least one byte and examine
the returned byte count from read(2). If it returns 0, that's a real
EOF; if it returns -1 EWOULDBLOCK, we simply ignore the situation.
That's the case on OS X: the Cocoa event dispatcher uses CFSocket to get
notifications and those use kevent (and, apparently, an auxiliary
thread) instead of an in-thread select() or poll(). That means the event
loop would activate the QSocketNotifier even though there is nothing to
be read.
Task-number: QTBUG-39488
Change-Id: I1a58b5b1db7a47034fb36a78a005ebff96290efb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Some codecs can't handle the range outside ascii properly and would then
fail to read the data back in correctly.
Task-number: QTBUG-15543
Change-Id: I4c02921e787a939eeec0c7a11603b5896d756aef
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If QNX does not have inotify there is no native engine.
Change-Id: I042efd0b59f916f9e0b55bbe5c7f3fe7bb6914c8
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
Reviewed-by: Fabian Bumberger <fbumberger@rim.com>
[ChangeLog][QtCore][QSaveFile] Now follows symbolic links while writing to
a link instead of replacing the link with the contents.
Change-Id: I5afd519cb9f96ae68fa4c23c33a18de75671a301
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: David Faure <david.faure@kdab.com>
