Because it is. It's just QCoreApplication::postEvent(), which is thread-safe.
It also _has_ to be, because we recommend to use deleteLater() to delete
QObjects that live in another thread:
Quoting the ~QObject() docs:
> Warning: Deleting a QObject while pending events are waiting to be delivered
> can cause a crash. You must not delete the QObject directly if it exists in
> a different thread than the one currently executing. Use deleteLater()
> instead, which will cause the event loop to delete the object after all
> pending events have been delivered to it.
If deleteLater() is not thread-safe, it cannot be used for one of its intended
purposes.
Change-Id: I333d506b42bdfcdff00fe6cefa234c21865625a6
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
We stopped storing the patch release number of Qt in the plugin metadata
in commit 7bd79b3cff (5.13), to make it
simpler to parse the validity of plugins before decoding the CBOR
payload.
Fixes: QTBUG-76855
Change-Id: I6aed4df6a12e43c3ac8efffd15adbbf83e928866
Reviewed-by: Liang Qi <liang.qi@qt.io>
g_options.buildPath did not have native separators. This caused
INSTALL_ROOT to not have native path separators, which again made
'mingw32-make check' fail to deploy the .apk. (The actual failure was that
mkdir failed because it did not accept paths with forward-slashes, so the
install_target rule failed. For the record, the command of that rule had
the following call to mkdir:
mkdir $(INSTALL_ROOT:@msyshack@%=%)\libs\x86
Change-Id: Id792c36986b52a527546d48aa9f7d9587e7a18d9
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
RenderHint::HighQualityAntialiasing and NonCosmeticDefaultPen are
obsolete since Qt5 but not marked as such. Therefore add
Q_DECL_ENUMERATOR_DEPRECATED_X now so those two enumerations can be
removed with Qt6.
[ChangeLog][QtGui][QPainter] HighQualityAntialiasing and
NonCosmeticDefaultPen are marked as deprecated and don't have an effect
anymore
Change-Id: Ib0c966a078a1d23d492d0255288e2066c50e87b6
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Remove the mainW, edit widget member variables from the test and use
widgets instantiated on the stack in the tests.
For the data-driven tests, use a static QScopedPointer, which is
reset by a newly introduced TestEnd action.
The book-keeping logic maintaining a list of shortcuts can then be
removed.
The setupShortcut() helpers are simplified and the special case
TestWidget::SendKeyEvent is replaced by a lambda in
keypressConsumption().
Task-number: QTBUG-76493
Change-Id: I15dfa86dfa0666ed8288b7190e37cdb862c261c8
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
- Use member initialization
- Introduce nullptr
- Use auto where applicable
- Use range-based for
Task-number: QTBUG-76493
Change-Id: Ic4dbee2d76a65be1f8a4c25f4ca7e4f032443579
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Varying versions of the library may be available depending on build tool
chain or Windows version. Try to dynamically resolve the D3DCompile
function.
Fixes: QTBUG-76845
Change-Id: Ib7eb3b8c454e9c25731eb2ba9ba45e54fe3f1283
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
This is in preparation of deprecating QLinkedList.
Most is straight-forward, except where operator+ was used on linked-list
iterators. In one case, replaced this with std::next, in the other, with
prefix increments, since the advancement was always equal to the loop
control variable. Since advancing a linked-list iterator is a linear
operation, this removes a source of quadratic complexity.
Another obstacle was the overloaded op< set, which was in the Qt namespace
while the iterator is from std and the payload, as before, was global.
This breaks ADL, so move these operators to namespace std. This violates
the standard, but the functions are tagged with our distinct types, so it
shouldn't cause any trouble.
Change-Id: Ifec0a927bfdabb002838cdf86fb8d23b32a38ff7
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
This class was introduced to modify the hook handling of
QWindowsGuiEventDispatcher. As the hook handling code is removed now, we
can remove QWindowsDirect2DEventDispatcher entirely.
Change-Id: I56491a67f163784f43b1025225e536d386cead1d
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
This is the most flaky-pass test currently.
It fails the first time it is run on MacOS_10_12, but
succeeds all the following times.
This happens extremely often, so disable it until the issue
is resolved.
Task-number: QTBUG-76566
Change-Id: I94359eceb91c3b958930424e6c8b5957fb3f1252
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QWidgetPrivate::updateIsTranslucent sets the surface format of the
window with the alpha based on the translucency attribute, so we need
to call this function when the attribute value changes. The test can
confirm that the window's requested surface format has changed, we
can't rely on what is actually set, and don't have to rely on
hard-coded values like 8bit alpha.
While WA_NoSystemBackground needs to be set for WA_TranslucentBackground
to have an effect, we can't clear the attribute when clearing
translucency (as it might have been set explicitly).
Change-Id: I238d6930b7e0488397467a4e035b5f530566a1ff
Fixes: QTBUG-60822
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When calling waitFor{ReadyRead,Disconnected} it will wait for data but
if the data is already received and the read notification has been
queued (and there's no more data coming in) it will return false.
By checking if a read notification has been queued and then handling
this we can easily take care of this scenario.
Fixes some flaky tests which missed the read data in waitForDisconnect
and similar.
Fixes: QTBUG-38385
Change-Id: Ic05d59883c1175783e56ff1822b6636c35aec874
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
If we end up in the connected state then we should pass on any
remaining data immediately instead of waiting until the next time we get
a read notification.
The other `case`s in the switch might be able to do something similar,
but I don't want to introduce that logic now in case it breaks something
else, the Connected branch is small and simple to deal with.
Should severely reduce flakiness with socks proxy in CI under pressure.
Task-number: QTBUG-76367
Change-Id: I0965d4c62a29a25ce6b8dd60862a464279aef0b4
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Ryan Chu <ryan.chu@qt.io>
The main goal of this patch was to port away from Java-style
iterators, to make QtBase QT_NO_JAVA_STYLE_ITERATORS-clean. And this
the patch achieves.
But I couldn't resist a few drive-by fixes, too, to wit:
- Use qDeleteAll() instead of while(!isEmpty()) delete takeFirst()
- Use QMap::last() instead of iterating to the end, remembering the
last-seen value
- Use QMap::contains() instead of QMap::keys().contains()
- Use qExchange() instead of copy+clear
- Make some functions const (requires the mutex member to be marked as
mutable, which is common for mutex members)
I am almost certain that getSsidFromNetworkName() cannot work correctly.
But this patch does not attempt to change the algorithm.
Change-Id: Ifa04d7837bdc0837036c3a7a73f8c51f4e681f42
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Since commit 6a7cea64 qt_GetMessageHook is effectively a no-op, and
we can remove the complete hook handling code.
Change-Id: I90383c0c09c2b0f1d715872de5f9519a879d9bae
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
- Use nullptr
- Fix static method invocations
- Use QString() instead of QString("")
- Use override
- Use member initialization
- Remove unimplemented code related to status bars
- Use Qt 5 connection syntax
- Fix apparent oversights in ambiguousItems() and
unicodeCompare(),where the 2nd shortcut was assigned to the wrong button
- Use Q_ENUM for the enumerations which will output the value in
QCOMPARE and automatically declare them to be a metatype
- Use enums in helper function signature for clarity
Task-number: QTBUG-76493
Change-Id: I0ed6ee7ee8dc2dbb48160a8383e6ed29164c3449
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
- Replaced the usages of:
* QDateTime::toTime_t() -> QDateTime::toSecsSinceEpoch().
* QDateTime::fromTime_t() -> QDateTime::fromSecsSinceEpoch().
* QDate::shortDayName() -> QLocale::system().dayName().
* QTime by QElapsedTimer, where the deprecated methods of QTime
were used.
- Modified the tests for the deprecated methods to be enabled only
when the corresponding methods are enabled: when the deprecated
APIs are disabled, the tests will be also disabled, and the
compilation won't be broken.
Task-number: QTBUG-76491
Change-Id: I4d565db2329e580c567aae511696eb1efe120843
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Otherwise "QVarLengthArray<Foo> x = {};" gives a warning. Also, some
compilers get confused about "QVarLengthArray()" this way.
Task-number: QTBUG-76199
Change-Id: I4296586c0181d3e6e82ca8b7b79aeb9a21645d1f
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Like in Qt code itself we should use forward slashes consistently.
This enables the vulkan test to run on Linux for MinGW
cross-compilation.
Task-number: QTBUG-76660
Change-Id: Ifc6dec11bac3c3769d5d06e49da529f66f7b5843
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
This opportunity was missed when adding the QStringView overload of
QStringList::filter() in 2a99f60cfb.
Change-Id: I8d679b92de6cc76c4d59fd54f01a25579ab3488f
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
As planned when adding YearRange: now that it's merged up to dev, move
it to QDateTime, since we can add to the API at 5.14.0.
This follows up on commit 82ad4be4a2.
Change-Id: I81b6c2331121a71e2592514781c02c5756e70c52
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We've not run util/locale_database/cldr2qtimezone.py for a while, so
CLDR has had time to add several more zones. Catch up, inserting the
new entries in order.
Change-Id: I8625548b0f7775958230eccbd89b897d7afed9e9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It wasn't mentioned in cldr2qlocalexml.py's instructions, so I didn't
know to run it. The data it used in an illustration was out of date.
Two tests could be combined with no loss.
Change-Id: I26e619e6210ea5b1258326fc4bc2b6aee9d6a999
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
When scanning the CLDR data, the script raised an exception if it
didn't recognize a zone ID. Instead, collect up such unrecognized IDs
in a list and report them all at the end, so that whoever runs this
can do them all in one go, rather than doing one, running the script,
doing the next, running the script, ad nauseam.
Change-Id: Ia659f1d1c7e1c1b4ccb87cc23828a0588a5bf958
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Use tuples for the fixed data. The numbering of rows in the data
tables isn't part of any public API, so we can change it freely; it is
thus unnecessary, as we can just enumerate a tuple of the data values
to generate sequential indices on the fly. (Updates to the data shall
no longer need to renumber in order to insert entries.)
Restore ordering of the data tables, and remove wanton spacing from
inside parens, in the process.
Change-Id: I59956cfb6191fe729300b57070671b7e66bd0379
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Casting an object to a subclass that is not the dynamic type of the
object constitutes undefined behavior.
Fix by befriending QObject.
Change-Id: Ib70dbef9095df31a6d89449d82a02cef9fccd348
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Since commit 20e9422e we don't ignore exit codes when installing files
anymore. This patch does the same for meta file installation. We
really should be notified properly if something goes wrong here.
Task-number: QTBUG-18870
Change-Id: Ib6a20293380f400379b10ec767bf38dc74d5beeb
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
With all of their special behavior deprecated, QCharRef and QByteRef
can simply be removed. Add a comment.
Change-Id: I8bad95424207ae281b5edf348b9ad81c6807dc12
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The resetShaderResources() done when starting a render or compute pass
purges all vertex, index, SRV, and UAV bindings. This will be optimized
at a later point, but until then the command buffer's state should be
updated accordingly, otherwise certain use cases end up with incorrect
rendering results due to not binding vertex/index/shader resources
as appropriate.
This fixes the shadowmap example on d3d.
Change-Id: I4d07929b8664b64bc608c6c8df474b0ee7c2ddbb
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Have feature flags as appropriate. OpenGL is causing a mess here
but let's support what we can since some of this will become relevant
in more sophisticated mesh drawing cases with 3D in particular.
Change-Id: Idfa7b4642ec87147978e03d78d6233efbd151491
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Draws 1024 cubes at random x,y positions with varying color with
a single instanced draw call.
Change-Id: I8737503acf23866ad4734b1d88753415a3b93445
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Enforce the maximum texture size limit both for textures and renderbuffers,
showing warnings and adjusting the size automatically.
On the low end ES 2.0 devices we can easily hit a maximum size of 2048x2048.
For example a Raspberry Pi running in full HD with the Controls 2 Material
style breaks right away as it tries to create slightly wider than 2048 texture
for its ShaderEffect.
Instead of breaking with an obscure framebuffer incomplete warning at best,
show something more informative and adjust the sizes so that something shows
up on the screen still.
(naturally applications not taking the maximum sizes returned from QRhi
into account are technically incorrect and may well end up with incorrect
rendering, but we should still try handling this as gracefully as possible)
Change-Id: Ib75eb893ab4774e1a3c49ed2d14c6bf9be8c807a
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
So that we can now operate on plain ES 2.0 implementations like the
Broadcom stack on the Raspberry Pi (which does not even have packed
depth stencil).
Also add the WebGL-specific combined attach logic to enable WebAssembly.
This has not been tested in practice.
Change-Id: I21219319062f295c1e88e3057c0c2ede724ac664
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
...but this will vary between backends, or in some cases
even between implementations of the same API.
Point size is settable only via the vertex shader (gl_PointSize).
It is silently ignored with D3D and HLSL.
Line widths other than 1 are supported only on OpenGL and Vulkan.
(but this is in fact deprecated with GL and optional with Vulkan)
Add QRhi::Feature values for both.
The line width is now settable on QRhiGraphicsPipeline. It is not a
dynamic state since the static, per-pipeline width is good enough for
most cases. (and the feature is not supported on half of the backends
anyways so it will get limited use in practice).
Change-Id: I6d3a32269527c452b794b2cb8b0f03101eab40b2
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
By default RTEMS does not support linux extensions for errno.
Enable it for build.
Change-Id: I43b346794b99ac0ed339bfbe6e39684071615503
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Ryan Chu <ryan.chu@qt.io>
The default stack size is too small on RTEMS.
Qt uses threads internally and there is no way to change their stack
size.
Change-Id: I94a42c7a70c745f0b50d7051d9320edfabd1e09e
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
[ChangeLog][QtCore][QStringList] Added QStringView overloads of join(),
filter(), and replaceInStrings().
Change-Id: I9636e21e2e43ed46cce0aa7fa23ab0710aa641ba
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
This change is used to generalize a template docker-compose file for all
modules. Ideally, the leaf module only need to keep a docker compose
file for all platforms (docker-compose.yml).
NOTE:
The version of docker-compose file downgrades from 3.4 to 2.1 because
the 'extends' keyword is not supported in Compose version 3.x.
Change-Id: I2e36fd9236eda86cb5fcf940d787ccefe9200696
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
