.. instead of manually casted 0s.
QCOMPARE(., nullptr) was added for Qt 5.8. Make use of the new API.
In tst_qwidget.cpp, as a drive-by, change
qApp->focusWidget() -> QApplication::focusWidget()
Change-Id: I1331b8916b026d48e01534d1ed0b3d72f3f3d50c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Store QGraphicsItems that are either not added to a scene or
removed from it again and that are also not children of other
items - iow: those that were leaked, even on successful runs
of the tests, in either a QScopedPointer, or, where that'd
cause too much churn due to adding of .data() calls, back the
pointer by a stack-allocated object.
This fixes the remaining leaks reported by GCC 6.2.1's ASan on
successful runs of tests/auto/widgets/graphicsview/qgraphicsitem.
Change-Id: I61c3a1cd39b9e96e83c5d7b8cf392e0b26ecbaf0
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Sérgio Martins <sergio.martins@kdab.com>
Found by UBSan:
tst_qgraphicsitem.cpp:5066:29: runtime error: downcast of address 0x2afcb006c7f0 which does not point to an object of type 'GeometryChanger'
0x2afcb006c7f0: note: object is of type 'QGraphicsRectItem'
00 00 00 00 d8 64 ca 98 fc 2a 00 00 40 a9 0b b0 fc 2a 00 00 75 65 29 00 00 00 00 00 35 00 00 00
^~~~~~~~~~~~~~~~~~~~~~~
vptr for 'QGraphicsRectItem'
#0 0x4c5f1c in tst_QGraphicsItem::prepareGeometryChange() tst_qgraphicsitem.cpp:5066
Fix by actually instantiating a GeometryChanger, which incidentally is
the pattern used by paint() a few lines below, too.
While at it, allocate the item on the stack (as is done in paint())
and create a local QRectF variable to avoid repeating the same magic
numbers over and over again.
Change-Id: If5a3d56511000a17703d78d7dd1f0ea072b8bc11
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Now that the minimum deployment target (and thus SDK) is 10.9 for OS X
and 7.0 for iOS, all code paths affecting platform versions lower than
the aforementioned are removed.
Change-Id: Id985c7259c4ac069319d88f2c29c9559ae9e8641
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
The header defined a macro QTEST_NO_CURSOR depending
QT_NO_CURSOR or obsolete platforms Windows CE and Meego.
Replace usages by QT_NO_CURSOR in the tests.
Change-Id: I3edac88e684d1f932dd3b721bb1c1b3fe9144237
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Remove Windows CE-specific files, #ifdef sections for Q_OS_WINCE and wince
.pro file clauses in library, examples and tests.
Task-number: QTBUG-51673
Change-Id: I102745aaca9d9737f2108fe7618111743d5ae980
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
From Qt 5.7 -> tools & applications are lisenced under GPL v3 with some
exceptions, see
http://blog.qt.io/blog/2016/01/13/new-agreement-with-the-kde-free-qt-foundation/
Updated license headers to use new GPL-EXCEPT header instead of LGPL21 one
(in those files which will be under GPL 3 with exceptions)
Change-Id: I42a473ddc97101492a60b9287d90979d9eb35ae1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Use QByteArray/QString addition instead in loops and for
test row names.
Change-Id: Ia067cd966bf13506e6ca19925eae3158da027b83
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Fix usage of API that is marked deprecated.
Change-Id: Ib9a45e93084fb5b0d0d3aefd64b755dff7c696d6
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
- Replace Q[TRY]_VERIFY(pointer == 0) by Q[TRY]_VERIFY(!pointer).
- Replace Q[TRY]_VERIFY(smartPointer == 0) by
Q[TRY]_VERIFY(smartPointer.isNull()).
- Replace Q[TRY]_VERIFY(a == b) by Q[TRY]_COMPARE(a, b) and
add casts where necessary. The values will then be logged
should a test fail.
Change-Id: Ie29640451dddeb58342038a8cd5fac152cce39e5
Reviewed-by: Mitch Curtis <mitch.curtis@theqtcompany.com>
The test tst_QGraphicsIten::sorting is blacklisted but always passing.
Change-Id: I69bbd4b4bbe227267e16ab5558ddabe7d2c0b1b3
Task-number: QTBUG-41342
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
On OS X 10.10. This test is currently failing in CI.
Change-Id: I1b3a33b404c915e83c5e4fa0a7af69d1b941d93c
Task-number: QTBUG-41342
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
Qt copyrights are now in The Qt Company, so we could update the source
code headers accordingly. In the same go we should also fix the links to
point to qt.io.
Outdated header.LGPL removed (use header.LGPL21 instead)
Old header.LGPL3 renamed to header.LGPL3-COMM to match actual licensing
combination. New header.LGPL-COMM taken in the use file which were
using old header.LGPL3 (src/plugins/platforms/android/extract.cpp)
Added new header.LGPL3 containing Commercial + LGPLv3 + GPLv2 license
combination
Change-Id: I6f49b819a8a20cc4f88b794a8f6726d975e8ffbe
Reviewed-by: Matti Paaso <matti.paaso@theqtcompany.com>
If the user has some objects selected and holds down the "extend selection"
key (Control on Windows, Command on Mac OS X), clicking and dragging a
rubber band selection deselects the current selection. This is
counter-intuitive and confusing for users.
This commit fixes the behavior so users can extend selections using the
rubber band when the proper key is held down.
Task-number: QTBUG-6523
Change-Id: Ieda4aaa50adb351c0405f5cb8aae23332eec58a9
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
tst_qcolumnview fails on OS X # QTBUG-41341
tst_qaccessibility fails on OS X # QTBUG-41340
tst_qnetworkreply fails on OS X # QTBUG-41320
tst_qfontcombobox fails on OS X # QTBUG-41318
tst_macplist fails on OS X # QTBUG-41314
tst_qgraphicsitem fails on OS X # QTBUG-41342
tst_qmdiarea fails on OS X # QTBUG-41343
tst_qtableview fails on OS X # QTBUG-41344
Change-Id: I2626aa61417336805872a807c4a6065b7e0ddb02
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Use QTRY_COMPARE instead of hard-coded timeouts, ensure window is
shown.
Change-Id: I4f23144ee14150c4fba9c6fbd8c4ee2da472cc75
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
The new flag ItemContainsChildrenInShape is similar to the existing
flag ItemClipsChildrenToShape. Setting the new flag makes QGraphicsScene
assume that children are drawn within the shape of the current item
but this is not enforced by clipping. When an application manually
ensures this clipping boundary, setting the new flag removes the
overhead of enforcing the clip with ItemClipsChildrenToShape, while
still allowing other routines to behave more optimially by assuming
children are within the shape of the current item.
[ChangeLog][QtWidgets][QGraphicsItem] Added the
ItemContainsChildrenInShape flag that enables using optimizations
of ItemClipsChildrenToShape without the overhead of enforcing the clip.
Change-Id: I5496fe1ca331b77fd51e0df8a3ace2b8e939eaf2
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
The cursor() test was missing a QTest::moveMouse() before sending of the
mouse event (as all the following subtests do). When run on a desktop with
the panel on the left side of the screen, the mouse pointer would land over
the left item instead of in between them, as assumed by the subtest, and
the following QCOMPARE failed.
Change-Id: Ib74fdf0cfbfbc8ecb79a906610a2da5cb50c89d0
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
For the conflicts in msvc_nmake.cpp the ifdefs are extended since we
need to support windows phone in the target branch while it is not there
in the current stable branch (as of Qt 5.2).
Conflicts:
configure
qmake/generators/win32/msvc_nmake.cpp
src/3rdparty/angle/src/libEGL/Surface.cpp
src/angle/src/common/common.pri
src/corelib/global/qglobal.h
src/corelib/io/qstandardpaths.cpp
src/plugins/platforms/qnx/qqnxintegration.cpp
src/plugins/platforms/qnx/qqnxscreeneventhandler.h
src/plugins/platforms/xcb/qglxintegration.h
src/widgets/kernel/win.pri
tests/auto/corelib/thread/qreadwritelock/tst_qreadwritelock.cpp
tests/auto/corelib/tools/qdatetime/tst_qdatetime.cpp
tests/auto/gui/text/qtextdocument/tst_qtextdocument.cpp
tools/configure/configureapp.cpp
Change-Id: I00b579eefebaf61d26ab9b00046d2b5bd5958812
The test is randomly failing on CI when ran on 10.7.
Task-number: QTBUG-31454
Change-Id: I79fce9a37616c6abaee960e338f8eea8fe6f31cf
Reviewed-by: Jani Heikkinen <jani.heikkinen@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
- Remove irrelevant test subdirs via .pro files
- Follow WinCE codepaths where applicable
- Replace unsupported Win32 APIs with WinRT equivalents
This does not aim to fix any failures in the tests themselves; it only
makes them compile.
Change-Id: Ia82bc0cc402891f8f6238d4c261ee9152b51be80
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Previously, the topmost untransformable's scene transform, which
includes the item's position and local transformation, was used to
determine the item's anchoring position. This position was then
passed on to be multiplied by the item's transform again. This
works fine for toplevel untransformable items that don't have any
transform set at all, but those who do would have their transforms
applied twice - one to determine the anchoring position, and again
to transform the item itself. Since only translation transformations
can affect the first operation (the anchoring pos), this bug only
applies to items that set ItemIgnoresTransformations and use a
local transform that includes translation.
Task-number: QTBUG-21618
Change-Id: I772d52d59dfd9f242d0140632a87e9c68dfe0ea1
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
A glitch in QGraphicsItem's logic made it update the focusScopeItem
pointer, but fail to notify the change to QDeclarativeItem through the
d_ptr->focusScopeItemChange() virtual function, hindering
QDeclarativeItem from emitting focusChanged() correctly for focus
scopes that do not have focus.
Two lines were moved, and a comment updated to reflect the reason
why the "return" is needed at this point. It's clear that the
calls to focusScopeItemChange() are unrelated to the return.
Task-number: QTBUG-29260
Change-Id: I12ba9161b16d34c3689401a92c86d2047989f7bd
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Reviewed-by: Alan Alpert <aalpert@rim.com>
Fully decorated windows cannot be smaller than 160x30 (Large fonts).
Enlarge Windows or remove Window frame to get rid of decorations.
Task-number: QTBUG-28611
Change-Id: Idb6ee94fb8d0760d5f97042b3084557f11e9fdf9
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
These types are either built-in or 'automatically declared' and so
don't need to be explicitly declared as metatypes.
Change-Id: Ibe8e2ec867afb4051a3c7eef806d9cd86945928b
Reviewed-by: David Faure <david.faure@kdab.com>
QGraphicsItem::setActive() is by design not guarded against calls that
do not change the current activation state of the item (e.g., calling
setActive(true) on an active item or calling setActive(false) on an
inactive item). This is to ensure that it's possible to set explicit
activation state on items, either before they are added to a scene, or
while the scene itself is inactive.
Before this fix, calling setActive(false) on a panel item that is not
currently active would by accident clear activation from any other
panel that might have focus. After this fix, activation is only cleared
if the item setActive() was called on itself is the active panel, or
is the panel that will regain activation once the scene is reactivated.
Task-number: QTBUG-28544
Change-Id: Ic4752f1e4400f9a0660bc968834747610212bb52
Reviewed-by: Bjørn Erik Nilsen <post@bjoernen.com>
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
Reviewed-by: Yoann Lopes <yoann.lopes@digia.com>
