The table and macros weren't extensible enough for non-Latin-based
languages.
Change-Id: I950f06de57aaf6bd0b24e0056e4acee2fb655f3d
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We have #if-ery on Q_OS_DARWIN controlling an expectation of gettign
"GMT+1" and "GMT+2" instead of "CET" and "CEST" in two tests; this
turns out to not be a deficiency of macOS so much as of how we
configure Coin's VMs. While we fix that, we need to ignore failures
in these tests, so that we can pull the #if-ery out and clear the
blacklist once the VMs are set up properly.
Task-number: QTBUG-70149
Change-Id: If3577200cf980b3329161ab3eea7bd2e9d0124e0
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
This reverts commit fd38c97a6c.
Apparently our actual VMs for 10.13 don't get this right, although the
ones used in testing did (prompting the fix this reverts). We
probably have mis-configured VMs, but this is the quick-fix to get
development moving again.
Task-number: QTBUG-70149
Change-Id: Ib96755d8e21d9b226e22fc985f13f34fa04117b1
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
CLDR up to somewhere between v29 (used by 5.9) and v31.0.1 (used by
5.10 and later) claimed Costa Ricans don't include fractions in their
currency; now it claims they expec two digits. Apparently one of them
does expect those digits, so this is the regression test I'll be
cherry-picking back to LTS, to accompany the CLDR updates they need.
Task-number: QTBUG-70093
Change-Id: I138772cc6013fa74de4f7c54b836cac83421eab2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Deep down in CoreFoundation, ICU is used, and this test triggers a
heap-buffer-overflow with AddressSanitizer. Disable this test for macOS
until Apple fixes it.
Task-number: QTBUG-69875
Change-Id: I43e4a69708be8cde3bde87c57db21f5b717f96b8
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
That way, we'll get told all the cases that fail, rather than only the
first. Provoked by investigation of failures that turned out to be
caused by QTBUG-69875.
Change-Id: I8fa2902cbbcb307cbe1fdec2e7d8d6b0c3eb998a
Reviewed-by: Erik Verbruggen <erik.verbruggen@qt.io>
The CLDR data contains eight locales with numeric territory codes, 001
for World, 150 for Europe and 419 for Latin America. The last was
already known in our enumdata.py, but as "Latin America and The
Caribbean", which is not supported by the CLDR, so I've amended it
while adding the other two. This gives us support for Esperanto and
Yiddish (among others).
[ChangeLog][QtCore][QLocale] Added support for World and Europe as
(numeric) "country" codes ("territory" in CLDR terms), thereby
enabling support for Yiddish and Esperanto, among other locales using
such codes.
Task-number: QTBUG-57802
Change-Id: Ibb1180fb720743a3a0589527649d10f3c9cd123d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
These tests kludge round Apple's use of GMT+1 and GMT+2 as names for
CET and CEST on Darwin; but 10.13 actually gets the names right, so
side-step out of the kludge when on this version or later.
Change-Id: Icb8a2f3ac30f0f621a19042dc03e0d281782dd41
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Erik Verbruggen <erik.verbruggen@qt.io>
Kept the intended word (rather than "number system" or "numeral
system" as might seem more natural) since CLDR's
common/supplemental/numberingSystems.xml uses numbering in its name
and in the XML tag-names in its contents. Thanks to Kari Oikarinen
for noticing, in review.
Change-Id: I85077611f9de8c4e812e1b5324fa2e99868b7b95
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This should improve reporting and ensure we know about each failing
case, not just the first, when one fails.
Change-Id: Ic00272201f69a2fd8508df23b1d746ea605aa539
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Kari Oikarinen <kari.oikarinen@qt.io>
Cleaned up some related #if-ery in the process.
Change-Id: I70f3152f2096ec34f36782fa1c3329f51c9b34f0
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Routine update in preparation for 5.12
* omitting Chakma because QLocale can't represent the zero digit,
* de_DE no longer uses vorm./nachm. but AM/PM
[ChangeLog][Third-party code] Updated CLDR to version 33.1
Task-number: QTBUG-67654
Change-Id: If20c47bb030abc3700b4f5a592152e617e2767c2
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Rewrote some of them away, in the process, using string arithmetic.
Change-Id: Ie1a29abefab001889a22a8bc66c7eee608496786
Reviewed-by: Albert Astals Cid <albert.astals.cid@kdab.com>
This is preparation (the WS-only parts) for splitting up some
over-long lines, in the course of which I also fix some indentation.
Change-Id: I800490e328b5e16d40685dff04c09cd145d5eacf
Reviewed-by: Albert Astals Cid <albert.astals.cid@kdab.com>
QSKIP() discards the whole test it appears in; so is not the right way
to announce that (and why) the test has just skipped a few sub-tests.
This was concealing a later failure on macOS, here fixed.
This matches an earlier fix for tst_QDateTime.
Change-Id: Idaf34a9d60d84202fd41d15455209457cc281f60
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
To make it run we make sure it finds the syslocaleapp, however since it
causes a crash we skip the test that uses it...
"formatTimeZone" was failing, but it is the exact same issue as in
e08ba34f26, so we solve it the exact same
way.
Change-Id: Ifd5c796735775dad94acf55210cf18c0f4d375ca
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
This only enables compilation, it doesn't fix any test.
Qt on Android supports process, but not TEST_HELPER_INSTALLS. See also
acdd57cb for winrt.
android-ndk-r10e is used to compile, see
http://doc-snapshots.qt.io/qt5-5.11/androidgs.html .
corelib/io/{qdir,qresourceengine} need to be fixed later.
Done-with: Frederik Gladhorn <frederik.gladhorn@qt.io>
Done-with: Mårten Nordheim <marten.nordheim@qt.io>
Change-Id: I34b924c8ae5d46d6835b8f0a6606450920f4423b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Also use data-driven test to reduce duplication.
Change-Id: I9516e52267cb3c7b239030fd73dbbf23ac8f52f7
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This makes an irreversible global change: tests that do it will mess
with other tests. So make sure they're all last. This required
splitting up one test; and revealed another that secretly depended on
being run with C as default locale.
Task-number: QTBUG-67276
Change-Id: Ic24ef48b2c9bd5c37c1f11260b437628019624ca
Reviewed-by: Kari Oikarinen <kari.oikarinen@qt.io>
When first starting an Android app we have invocation order issue, to
load the platform plugin we create the default QLocale (needed by the
resource locator code to see if :/qt/etc/qt.conf exists) so when the
android platform plugin loads and creates its own QSystemLocale, the
QLocale defaultLocalePrivate is already created and pointing to
globalLocaleData which means that systemData won't be called and thus
the code that triggers the call to QLocalePrivate::updateSystemPrivate
won't be called when calling QLocale().
I thought of two ways of fixing this, one was calling
QLocalePrivate::updateSystemPrivatea() from the QAndroidSystemLocale
constructor, but giving the responsibility to not break things to the
plugin seems a little fragile, so making the check on QLocale()
seems better.
Without this patch an Android app doing
QApplication app(argc, argv);
qDebug() << QLocale().name();
qDebug() << QLocale().name();
qDebug() << QLocale::system().name();
qDebug() << QLocale().name();
would print
""
""
"ca_ES"
"ca_ES"
now it correctly prints "ca_ES" the four times.
Task-number: QTBUG-41385
Change-Id: I2cf419f59aa008fa3aca11295fe7d42c40bcc32e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Previously, a 1, 2 or 3 for "dd" would be rejected because 10, 20 or
30 would fit in the field and be valid; but 4 or more was accepted,
even though it was too short for the field, because no suffix could
make it valid within the field-width.
[ChangeLog][QtCore][QDateTime] When parsing dates and times from
strings, fixed-width date-time fields, such as a "dd" for day,
QDateTime now rejects all values that should be padded, rather
than only doing so when the value is a prefix of some value that
would fill the field-width. Use a single letter for the field,
e.g. "d" for day, if you want to accept short
values. (QDateTimeEdit is not affected.)
Task-number: QTBUG-63072
Change-Id: I22d223c50057c3edab4ef7f01d9ed0f58e9139c1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Currently QLocale::c().bcp47Name() returns "C" which, according to [BCP47], is
not a valid language tag. In particular it does not conform to the ABNF grammar
in section 2.1 which specifies a minimum length of 2 characters for all language
tags.
[BCP47]: https://tools.ietf.org/html/bcp47
This patch changes the return value to "en" seeing as the documentation for
QLocale::Language states that the C language is identical in behavior to
English.
Task-number: QTBUG-61949
Change-Id: I2a381def8fb7156467e01d105da92bb1f4821204
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
[ChangeLog][QtCore][QLocale] Fixed the conversion of QTime to string
form and parsing from string form to always treat the value as the
decimal fraction of the seconds component. That is, the string format
".z" produces/parses ".2" for 200 milliseconds and ".002" for 2
milliseconds. Use of "z" or "zzz" is discouraged outside decimal
fractions to avoid surprises.
Task-number: QTBUG-53565
Change-Id: Ia19de85ad35e4eb7bb95fffd14792caf9b4a5156
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Since the result is an actual zero, this section of code looking for
underflows kicks in. But we forgot to take the capital letter into
account when parsing the number.
Task-number: QTBUG-61350
Change-Id: Ia53158e207a94bf49489fffd14c6abbd21f0bac0
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
tst_QLocale::macDefaultLocale() was determining local-time's current
offset from UTC and using it when working out what to expect the
offset at 1:2:3 today to be. When a transition happens after 1:2:3 on
its day (which is usual for DST changes in Europe), this lead to using
the new offset to test a time before the transition; the test was thus
wrong and failed.
Use the time to be tested (and current date) to compute the offset to
use, instead of using the current date-time.
Change-Id: I1c02a5579bca859e1d1aeb4f45b24871a08287af
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The formatting of times in Norwegian has changed to use colon rather
than dot between hours, minutes and seconds:
http://cldr.unicode.org/index/downloads/cldr-30#TOC-Other
tst_QLocale gets a matching revision.
Change-Id: I35a16080def5fbadd62144a0b44be8110b9be29b
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
It should be easier to translate sizes in bytes to human-readable
strings consistently rather than having to repeat this code (and the
string translations) in various places. The FileDialog in QtQuick.Controls
has a use for this, too.
[ChangeLog][QtCore][QLocale] Added QLocale::formattedDataSize() for
formatting quantities of bytes as kB, MB, GB etc.
Done-with: Edward Welbourne <edward.welbourne@qt.io>
Change-Id: I27bca146c3eba90fa7a5d52ef6626ce85723e3f0
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
While at it, change the interface of qt_repeatCount() to just take
a single QStringView, since QStringView::mid() is so cheap. Add some
\internal docs.
[ChangeLog][QtCore][QLocale] Added toString(QDate/QTime/QDateTime)
overloads taking the format string as a QStringView.
Change-Id: Ic078796677a6db06227c8a3e276dbdb1039ceead
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The returned data is in US-ASCII (or else Latin-1), and resides in
consecutive memory. We can therefore return it in a QLatin1String,
which, however, will in general not be NUL-terminated.
Many users use the return value as part of a QStringBuilder
expression, and those which are not are not pessimized further by
this change.
The caller in qtimezoneprivate_icu looks as if it could simply zero
-terminate the return value and use it as-is, as opposed to
converting to UTF-8, but I left the code equivalent to the original
just the same.
Change-Id: I0e628af8c1320fcff8d0aacf160e859681d2b85a
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QLocale::matchingLocales() simply created each locale using the basic
data, without (unless the matching conditions stipulated Language C)
applying number-options hacks that it applies everywhere else, when
creating the C locale. Thus the C locale in its returned list (if it
wasn't the only entry) ended up with the default number options,
without omiting separators in numbers. Thus QLocale::c() didn't
actually appear as an entry in the list. Discovered while
investigating QTBUG-58947.
Added a dumb autotest that checks various ways of getting the C locale
do actually give us equal locale objects. Fixed matchingLocales() to
apply the same hack as is used elsewhere for the C locale.
Change-Id: I263f31da623052b63171f5b5a83c65802383df21
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Replace all QT_NO_PROCESS with QT_CONFIG(process), define it in
qconfig-bootstrapped.h, add QT_REQUIRE_CONFIG(process) to the qprocess
headers, exclude the sources from compilation when switched off, guard
header inclusions in places where compilation without QProcess seems
supported, drop some unused includes, and fix some tests that were
apparently designed to work with QT_NO_PROCESS but failed to.
Change-Id: Ieceea2504dea6fdf43b81c7c6b65c547b01b9714
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
currencySymbol == "$" does not mean negative currency values will be formatted
as "($value)". With all locales I have on my mac machines (10.11/10.12) the
result is different from what this test expects. Also, the results are very
different for different locales. Apparently, we never saw this problem before
since in our CI "macs" we never have US Dollar/en_US selected in System Preferences.
Task-number: QTBUG-58784
Change-Id: Ic2c3a3172bf1e715e99092ddee8f461b216d995a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
For language "Traditional Chinese" on iOS with region "US",
the logic was formerly to attempt a match on country/language/script (fail),
followed by country/language (which would result in script defaulting to
"Simplified"). Now, the logic is to try language/script first if script is
specified. Failing that, language/country will be attempted.
Task-number: QTBUG-39639
Change-Id: I75a774b1e66686e95167ff221458a97a7ea2660d
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Jason Erb <jason.erb@sparist.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Consistent with other Unix platforms, and internally consistent between tests,
as a lot of tests were already applying CONFIG -= app_bundle manually.
Change-Id: Icd2b7e1c08015b26137af60ff82fddbc753f0ff4
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
EcmaScript mandates that number-to-string functions pad the resulting
strings with zeroes, up to the requested precision. QLocale actually
supports this, under the disguise of the "Alternate" flag, used by
QString::asprintf().
We split this flag into the three options it actually represents and
make IncludeTrailingZeroesAfterDot available as a NumberOption. This
allows us to generate numbers in an EcmaScript compliant way.
In addition, a symmetrical option to reject trailing zeroes when
parsing strings to numbers is added.
[ChangeLog][QtCore][QLocale] Additional flags in QLocale::NumberOption
allow generating strings from doubles in accordance to EcmaScript's
Number.toPrecision(n).
Change-Id: If1090d5a0364a29811011a472afc8b75d0af0a8f
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use the new qtConfig macro in all pro/pri files.
This required adding some feature entries, and adding
{private,public}Feature to every referenced already existing entry.
Change-Id: I164214dad1154df6ad84e86d99ed14994ef97cf4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Move those to the equivalent {to,set,from}SecsSinceEpoch(), except for
the cases that did QDateTime::currentDateTime{,Utc}().toTime_t. Those
are best implemented with QDateTime::currentSecsSinceEpoch().
Change-Id: Ib57b52598e2f452985e9fffd145a366c92cfda20
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
* A bunch of fixes and additions to the locale data
* Add new scripts from Unicode 8.0 and 9.0
* Map some potentially useful languages and territories
[ChangeLog][QtCore] QLocale data updated to CLDR v29
Change-Id: I759ccb27fe19be2722be913c5c2e6aa5f36e5c14
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
