Follow through on a comment from 2012: sort the likely subtag array
(in the CLDR update script) and use bsearch to find entries in it.
This simplifies QLocaleXmlReader.likelyMap() slightly, moving the
detection of last entry to LocaleDataWriter.likelySubtags(), but
requires collecting all likely sub-tag mapping pairs (rather than just
passing them through from read to write via generators) in order to
sort them.
Change-Id: Ieb6875ccde1ddbd475ae68c0766a666ec32b7005
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Our enumdata.py namings of countries had fallen somewhat out of sync
with CLDR's names. In the process, support including hyphenation in
the unsquashed name, along with spacing. Distinguish, in comments,
between older renamings and those first seen in Qt6.
Change-Id: I91ec444bf35222ab6a9332e389ace19cca0e4fdf
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The code pervasively presumes their values can be held in a ushort, so
make sure the compiler knows we expect that to work (and doesn't
complain about narrowing when we do convert them to ushort).
Change-Id: Idde7be6cceee8a6dae333c5b1d5a0120fec32e4a
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Read three more values from CLDR and add a byte to the bit-fields at
the end of QLocaleData, indicating the three group sizes. This adds
three new parameters to various low-level formatting functions. At the
same time, rename ThousandsGroup to GroupDigits, more faithfully
expressing what this (internal) option means.
This replaces commit 27d1391280 with a
fuller implementation that handles digit-grouping in any of the ways
that CLDR supports. The formerly "Indian" formatting now also applies
to at least some locales for Bangladesh, Bhutan and Sri Lanka.
Fixed Costa Rica currency formatting test that wrongly put a separator
after the first digit; the locale (in common with several Spanish
locales) requires at least two digits before the first separator.
[ChangeLog][QtCore][Important Behavior Changes] Some locales require
more than one digit before the first grouping separator; others use
group sizes other than three. The latter was partially supported (only
for India) at 5.15 but is now systematically supported; the former is
now also supported.
Task-number: QTBUG-24301
Fixes: QTBUG-81050
Change-Id: I4ea4e331f3254d1f34801cddf51f3c65d3815573
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Conflicts:
examples/opengl/doc/src/cube.qdoc
src/corelib/global/qlibraryinfo.cpp
src/corelib/text/qbytearray_p.h
src/corelib/text/qlocale_data_p.h
src/corelib/time/qhijricalendar_data_p.h
src/corelib/time/qjalalicalendar_data_p.h
src/corelib/time/qromancalendar_data_p.h
src/network/ssl/qsslcertificate.h
src/widgets/doc/src/graphicsview.qdoc
src/widgets/widgets/qcombobox.cpp
src/widgets/widgets/qcombobox.h
tests/auto/corelib/tools/qscopeguard/tst_qscopeguard.cpp
tests/auto/widgets/widgets/qcombobox/tst_qcombobox.cpp
tests/benchmarks/corelib/io/qdiriterator/qdiriterator.pro
tests/manual/diaglib/debugproxystyle.cpp
tests/manual/diaglib/qwidgetdump.cpp
tests/manual/diaglib/qwindowdump.cpp
tests/manual/diaglib/textdump.cpp
util/locale_database/cldr2qlocalexml.py
util/locale_database/qlocalexml.py
util/locale_database/qlocalexml2cpp.py
Resolution of util/locale_database/ are based on:
https://codereview.qt-project.org/c/qt/qtbase/+/294250
and src/corelib/{text,time}/*_data_p.h were then regenerated by
running those scripts.
Updated CMakeLists.txt in each of
tests/auto/corelib/serialization/qcborstreamreader/
tests/auto/corelib/serialization/qcborvalue/
tests/auto/gui/kernel/
and generated new ones in each of
tests/auto/gui/kernel/qaddpostroutine/
tests/auto/gui/kernel/qhighdpiscaling/
tests/libfuzzer/corelib/text/qregularexpression/optimize/
tests/libfuzzer/gui/painting/qcolorspace/fromiccprofile/
tests/libfuzzer/gui/text/qtextdocument/sethtml/
tests/libfuzzer/gui/text/qtextdocument/setmarkdown/
tests/libfuzzer/gui/text/qtextlayout/beginlayout/
by running util/cmake/pro2cmake.py on their changed .pro files.
Changed target name in
tests/auto/gui/kernel/qaction/qaction.pro
tests/auto/gui/kernel/qaction/qactiongroup.pro
tests/auto/gui/kernel/qshortcut/qshortcut.pro
to ensure unique target names for CMake
Changed tst_QComboBox::currentIndex to not test the
currentIndexChanged(QString), as that one does not exist in Qt 6
anymore.
Change-Id: I9a85705484855ae1dc874a81f49d27a50b0dcff7
It was causing all lines after the first, in each calendar's
locale_data[], to be over-indented. This only changes spacing.
Change-Id: Ibfc4986548eecbfdba2902cc18f44a2af669bc6d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
I've taken care of all the others in the course of other changes
already ...
Task-number: QTBUG-81344
Change-Id: I44e40a0d1c9f1e1a540a5f4cd252369fdc9b2698
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
Move the code out to a CldrReader class in cldr.py, expand CldrAccess
with facilities that needs, expand ldml.py to include support for more
features, finally making xpathlite.py redundant. This initial commit
aims, though, to be bug-for-bug compatible with xpathlite in its
reading of the CLDR data.
It turns out we've been using draftier data than we were aware of
(which might not be a bad thing). The xpathlite code appeared to check
for draft attributes, but these only appear on leaf nodes and most
data were fetched by finding a parent and then scanning its children
without the draft check; only am/pm data was actually being excluded
based on draft values. (We allowed contributed, for am/pm, in
addition to approved, which is all the xpathlite code allows
otherwise.) There are also some less equivocal bugs; I'll deal with
these in later commits.
Simplified number-system data look-ups; the old get_number_in_system()
was taking care of old LDML versions' placement of the number system
attribute; this is no longer needed. (It was also being used for a
currency value to which it was not appropriate, which is now handled
separately; this is one of the bugs mentioned above.) Ditched a
fall-back to nativeZeroDigit, which no longer exists in CLDR.
Change the command-line to take the root of the CLDR data tree, rather
than its common/main/ sub-directory. Support naming the file to which
to write output, as a second command-line argument, instead of always
writing to stdout (which remains the default) and leaving whoever runs
the script to redirect stdout.
Support (internally for now, while adding TODOs to give main() more
command-line options) separating the stderr output into its more and
less interesting parts; for now, continue producing both, but suppress
the least interesting entirely.
Task-number: QTBUG-81344
Change-Id: Ie611b47403a9452b51feaeeaaa0fbc8f7e84dc71
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
This saves repetition of temporary-file manipulation code. In the
process, ensure that we tidy away temporary files on failure.
Moved a comment in qlocale.h to *outside* the re-written portion, to
save having to rewrite it every time. Added blank lines to separate
script data from country data in the generated output. Changed 0s in
one comment to zeros, to match another comment.
Isolated use of sys to the __main__ block.
Isolated use of enumdata to the new LocaleHeaderWriter class.
Modernised all the string-formatting I touched.
Task-number: QTBUG-81344
Change-Id: I5768e45d9a8ea23facc303b3dd8af8b3ccbf7ff2
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
The time-zone script was importing two functions from the locale data
generation script. Move them to a separate module, to which I'll
shortly add some more shared utilities. Cleaned up some imports in the
process.
Combined qlocalexml2cpp's and xpathlit's error classes into a new
Error class in the new module and made it a bit more like a proper
python error class.
Task-number: QTBUG-81344
Change-Id: Idbe0139ba9aaa2f823b8f7216dee1d2539c18b75
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
This new class mirrors the existing QLocaleXmlWriter and places the
two side-by-side in qlocalexml.py, rather than having the writing and
reading in separate places.
Made judicious use of transformed versions of mappings to save
repeated iteration of a mapping's entries to do lookups on fist
entries of pair-values; several (id, name, code) data-sets are
sometimes indexed by id, sometimes by name.
Reworked the default_map, that the complicated compareLocaleKeys()
used in sorting locale keys, to map IDs instead of names; the function
also needed the locale_map so that it could convert IDs to names,
which we can skip by going directly with IDs.
Task-number: QTBUG-81344
Change-Id: Iff6a97f7f0755b56dda70d8a6796ec074c558910
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
It implements interaction with the QLocaleXML file format type, so
rename it to match.
Task-number: QTBUG-81344
Change-Id: I46302d4ac1038cdfc5929e73b554b6d793814c56
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Extract the character in its proper unicode form and encode it in a
new single_character_data table of locale data. Record each entry as
the range within that table that encodes it. Also added an assertion
in the generator script to check that the digits CLDR gives us are a
contiguous sequence in increasing order, as has been assumed by the
C++ code for some time. Lots of number-formatting code now has to take
account of how wide the digits are.
This leaves nowhere for updateSystemPrivate() to record values read
from sys_locale->query(), so we must always consult that function when
accessing these members of the systemData() object. Various internal
users of these single-character fields need the system-or-CLDR value
rather than the raw CLDR value, so move QLocalePrivate's methods to
supply them down to QLocaleData and ensure they check for system
values, where appropriate first.
This allows us to finally support the Chakma language and script, for
whose number system UTF-16 needs surrogate pairs.
Costs 10.8 kB in added data, much of it due to adding two new locales
that need surrogates to represent digits.
[ChangeLog][QtCore][QLocale] Various QLocale methods that returned
single QChar values now return QString values to accommodate those
locales which need a surrogate pair to represent the (single
character) return value.
Fixes: QTBUG-69324
Fixes: QTBUG-81053
Change-Id: I481722d6f5ee266164f09031679a851dfa6e7839
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This enables us to make the sizes quint8 and benefit from the
resulting packing, making the locale data smaller. The sizes for long
month-name lists (which concatenate twelve names with semicolon as
separator) can overflow an 8-bit member, so use quint16 where needed.
Re-ordered the data in QLocaleData and QCalendarLocale. Now all
long-short(-narrow) families arise in that order; and any standalone
is grouped with the one of the same length. (This cost 20 bytes in the
date-format table, which optimises out more duplication if short is
before long, but the saving in the (smaller) time-format table more
than make up for it; and 20 bytes isn't worth the confusion that being
inconsistent in ordering might cause.)
At the same time, drop trailing semicolons from list entries (which
join various names with semicolon) as they're not needed: we know
where the end of the list is, because we know the size of the string
that results from concatenation. The code that parses such lists can
even correctly handle empty entries at the end.
Saves 26 kB of data in the compiled binaries.
Task-number: QTBUG-81053
Change-Id: If6ccc96a6910828817aa605d10fd814f567ae1e8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Some entries in tables were sub-strings (e.g. prefixes) of others.
Since we store start-index and length (with no need for terminators),
any entry that appears as a sub-string of an earlier entry can be
recorded without making a separate copy of its content, just by
recording where it appeared as a sub-string of an earlier entry.
(Sadly this doesn't apply to month- or day-names and their
short-forms: for those, we store ';'-joined lists. Thus, although
each short-form is a prefix of its long-form, the short-form is stored
in a list with other short-forms; and this is not a prefix of the list
of matching long-forms.)
The savings are modest (780 bytes at present), but cost us nothing
except when running the python script that generates the data files
(it takes a little longer now), which usually only happens at a CLDR
update.
Change-Id: I05bdaa9283365707bac0190ae983b31f074dd6ed
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Split a long line.
Use pythonic chained comparison to save some repetition.
Comment on a field not currently in actual use.
Say "zeros" rather than "0s" in one comment to match another.
Added a .h suffix to the main locale data tempfile to match the naming
of the tempfiles used for calendar data.
Simplify generation of the blank line between Language and Script; and
include a matching blank between Script and Country.
This adds one blank line to qlocale.h
Removed a stray space that misaligned locale data lines.
This produces a space-only change in the generated *_data_p.h files.
Change-Id: I974a9e8923c3dfd2178855d2cf1d6a5074e130b3
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The Unicode data tables moved with QString and friends.
So did the locale data generated from CLDR.
This amends commit a9aa206b7b.
Change-Id: If12f0420b559dcb78993adc00e9f39751bca684a
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This has its own locale data, extracted from CLDR. This data may
potentially be shared with other variants on the Islamic calendar, so
is handled by a separate base-class, QHijriCalendar, on which such
variants may base their implementations.
[ChangeLog][QtCore][QCalendar] Added support for the Islamic Civil
calendar, controlled by feature islamiccivilcalendar, with locale data
that can be shared with other implementations, controlled by feature
hijricalendar.
Fixes: QTBUG-56675
Change-Id: Idf32d3da7034baa8ec5e66ef847e59a8a2f31cbd
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This has its own locale data, extracted from CLDR.
[ChangeLog][QtCore][QCalendar] Added support for the Jalali (Persian
or Solar Hijri) calendar, controlled by feature jalalicalendar.
Fixes: QTBUG-58404
Change-Id: Id5c56a10db05a4fd612aafc01615273db81ec743
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Add QCalendarBackend as a base class for calendar implementations and
QCalendar as a facade via which to access it.
QDate's implicit implementation of the Gregorian calendar becomes
QGregorianCalendar and QDate methods now support choice of calendar.
Convert QLocale's CLDR data for month names to a locale-data component
of each supported calendar and relevant QLocale methods now support
choice of calendar. Adapt Python scripts for locale data generation to
extract month name data from CLDR (keeping on version v35.1) into the
new calendar-locale files. The locale data for the Gregorian calendar
is held in a Roman calendar base, for sharing with other calendars.
Add tests for basic uses of the new API.
[ChangeLog][QtCore][QCalendar] Added QCalendar to support diverse
calendars, supported by implementing QCalendarBackend.
[ChangeLog][QtCore][QDate] Allow choice of calendar in various
operations, with Gregorian remaining the default.
Done-with: Lars Knoll <lars.knoll@qt.io>
Done-with: Edward Welbourne <edward.welbourne@qt.io>
Fixes: QTBUG-17110
Fixes: QTBUG-950
Change-Id: I9d6278f394269a183aee8156e990cec4d5198ab8
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The template for the "This is a generated file" notice made a clumsy
intrusion in the code in which it appeared, so split it out as a
constant of the module and access it by name where it's used.
Change-Id: Ic4dfb8e873078c54410b191654d6c21d082c9016
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
It was misnamed local_database, quite missing the point of its name.
Change-Id: I73a4fdf24f53daac12304de1f443636d89afacb2
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
