Forward-port of 9ce60ff509c4ff27fe861fc5b2080f50897a68c4 (Qt4Macros:
Allow specifying a TARGET in invokations of macros., 2013-02-26)
from cmake.git.
This causes the INCLUDE_DIRECTORIES and COMPILE_DEFINITIONS to be
used from the specified target when running moc.
Change-Id: I868a35ade3c6b059e64d226291cf2046709d86d4
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This is new in CMake 2.8.12 and replaces the old properties
matching IMPORTED_INTERFACE_LINK_LIBRARIES_<CONFIG>.
Change-Id: I5d4c454972f2535f6792e95718c73d80c56ac24c
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Some packagers don't want to install the private headers.
Check the existence of private headers only if the 'Private' component
is specified when finding the package.
Task-number: QTBUG-32466
Change-Id: I1fdbfb25e8ce485cd051564b937f766b2733741a
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Change-Id: Ida382a80dba882bbeb920756adc0c16321efe37e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
QPrinter is not implemented on android, so the test fails to
link there.
Change-Id: I10ca0179323362a9c9f74325332043c968d67d3c
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
There may be multiple libraries specified in the mkspec, such as
EGL and Mali, as used in devices/linux-sh4-stmicro-ST7108-g++, so
create an imported target for each one. Also populate the
Qt5Gui_EGL_LIBS variable with all created imported targets. Similar
variables are created for the used OPENGL implementation.
In the case of using the packaged ANGLE library, we already know the
exact locations of the binaries.
This makes it possible for third parties to use the same GL
implementation as used by the Qt build itself. As these are used only
privately by QtGui, they are also added to the DEPENDENT_LIBRARIES
of that target so that they are found for rpath-link usage.
On some platforms (eg Raspberry Pi), multiple include directories must
be set to include egl.h, as the headers it includes for vcos are a
bit scattered.
Task-number: QTBUG-29132
Change-Id: I1126da3d37cd51c88d3670347c8b6405b285efb5
Reviewed-by: Volker Krause <volker.krause@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Change-Id: I8174ca78b4e2d8b4344278acf8ca4b0db3115d1a
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Change-Id: I1d8061302fbb8494b5ae31e20a644745fe969f10
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Brad King <brad.king@kitware.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Used by features in CMake 2.8.11.
This matches the features in FindQt4 in that version of CMake,
namely that the IMPORTED targets contain the appropriate
INTERFACE_INCLUDE_DIRECTORIES and INTERFACE_COMPILE_DEFINITIONS
and that the qtmain.lib static library is automatically linked to
on Windows by executables. Additionally, the
INTERFACE_POSITION_INDEPENDENT_CODE property is set appropriately
if Qt requires users to use position independent code.
Change-Id: Ide341f43fcaf7d722a7bdf1a12b1071c7e548ccc
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Instead of first finding it and then testing that we can find it.
Change-Id: I1a1090693520b1d6adadef93839f25d277947e76
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Task-number: QTBUG-28540
Change-Id: I916d104c8aba551ee9a5b34da3fd85dcb26bbf64
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Change-Id: Ib6347360d678bbe54445ebb0680ad66d77a7f3c7
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
There is no need to list the dependencies of the Widgets module.
Change-Id: I9469d4f352685f7122a258f1a44bd017fdc5b3a7
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This allows finding a minimum particular version of Qt 5.
Change-Id: I96112f1be90f397ec60a2b233989ac0e0380bef9
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Invoking find_package with a version but without the version
file present results in an error.
Change-Id: I29d662081ad5dbd7b2259abeec06affda97cbb6a
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The DBus module is aware of its QtCore dependency, and it doesn't need
to be found explicitly. This test probably dates from when that was not
the case.
Change-Id: I3c78997660efed14d84b062d38d8c68dd4f7ae56
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Since we're only including the Extras file one time, invoking set() for
the include dirs again will overwrite the addition of include dirs in
the extras file.
We only need to populate these variables if not set anyway, so do that.
Change-Id: I04dad0674778e79c8c12c18231b8ce6c92edf881
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Change-Id: I96b6e96539a84a5919992afbaee757fa080b7ae0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
All modules currently have a test_modules CMake test. The
new module_includes test has very similar requirements, and can
obsolete the hand-maintained test_modules tests in all modules.
After all test_modules have been removed in other repos, the
module_includes test can be renamed to that name.
The types chosen need to have a constructor which can be invoked
with no arguments. QtConcurrent has no public classes which fit
that description so it is still tested separately
Change-Id: Id7929cd32b3112c293cbf5e6964cc894a697f9b1
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The variations of includes which should work are tested. For example,
in the case of testing the QtCore module and QObject include, the
following includes are generated and compiled:
#include <QObject>
#include <QtCore/QObject>
#include <QtCore>
#include <QtCore/QtCore>
As the private include directories are not available to the compiler,
this also tests that private headers are not included from public ones.
Change-Id: Id03d0fe290c9691e0f7515015892991d1701ab72
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The default symlink is not available on Windows, so the qplatformdefs.h
header is not available there. Instead we can bypass the symlink and
use the actual mkspec name directly.
Change-Id: I1d7e05f35c1ff56befab5bed307cb1755ade8377
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
We need to handle CMAKE_INCLUDE_CURRENT_DIR for include directories.
Otherwise generated files located in the current binary directory are
not found as expected.
e.g. *.json file as meta data for Qt5's plugins generated at build time.
Change-Id: I14ae1e7013f9d8b485aa990d50db4a03ca4f4b81
Reviewed-by: Yuchen Deng <loaden@gmail.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Change copyrights and license headers from Nokia to Digia
Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
The fix for this failing test is not yet agreed to. Disable it to
allow progress with the CI system while the fix is decided.
Task-number: QTBUG-26869
Change-Id: Ia8089b8e66d750353e7c1c69597916af0d042856
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
These projects are expected to fail, but we need to make sure they fail
for the right reason.
Change-Id: I8a7caaa663060712c5c7113ef3b054feba2e2287
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
In the CI system, an environment variable is used to convey
the CMAKE_PREFIX_PATH, but that can not be relied upon.
Change-Id: Ie4fbacaac6ae18f95a3b4d1e796a4b4c91a418c4
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The newer CMake version has the POSITION_INDEPENDENT_CODE property which is
what we need here. The CMake 2.8.8 implementation uses awkward and incomplete
string manipulation which I don't want to maintain for any amount of time
when Qt 5.0 is released.
Change-Id: If7ace9c6925ccdbf800f1863fa2368e55fa44d7f
Reviewed-by: Brad King <brad.king@kitware.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The behavior of QTEST_MAIN depends on whether QT_GUI_LIB or QT_WIDGETS_LIB
is defined. It could create a QGuiApplication or QApplication which
could cause linking issues if the corresponding library is not linked to.
The failure cases are also tested.
Change-Id: I61ed0bc760564ef42ce1dbd86c83c06348c860ff
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
It should be possible to include both:
* <QtGui/private/qfoo.h>
* <private/qfoo.h>
Change-Id: I83ed5bba633b4a6b9bd38e315c987d78beecfb1b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Tests which are expected to not build need to get a way to find the
Qt 5 config packages. Because they use try_compile, there is no way
to pass the contents to it.
Work around that by generating a file containing the prefix which
the tests will include.
Change-Id: If43080c241539e4af5fe1c183e7da72066278b73
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
They are still internal, but all Qt5 modules will be able to use
them then.
Change-Id: I42ab656115b0976ca959293dfd664ec071f35dbf
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This makes it easy to add cmake module tests for all modules.
Change-Id: I303bf7674ca6ae7a8544488f96e8e02afbaa6ff0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Forward-port of commit 9ce67d30011db4528d3d0bbee36412e13cfb80cc in
cmake.git.
Change-Id: I2d6c14f68f1630fc0835b3103e5058f52c2d0d13
Reviewed-by: David Faure <faure@kde.org>
Initially we didn't do this because someone could accidentally create
another target of a conflicting name, and used a variable to store whether we
have created the target already or not.
That wasn't adequeate to deal with finding the package in a scope
like a function, so we used a directory property. However, the directory
property is not valid in the same scopes as the defined target. For
example, finding a Qt module in both a directory and a subdirectory causes
a conflict.
As it is already unlikely that a target would be accidentally created with
a name like Qt5::Core, we should simply use the IF(TARGET) form.
Change-Id: If64f25d45f51edcd1edb0d4bfb5ed3bb2479bd27
Reviewed-by: David Faure <faure@kde.org>
