instead of letting the specs validate themselves on each call, let them
only define a callback for use by the verifyspec configure test. this
is somewhat faster, and allows them to be loaded before qdevice.pri is
populated.
Change-Id: I2b60d006b33bbf42c28949f10ad429520ed32f46
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The spec, added in 5.7.0, simply defined WIN_INTERFACE_CUSTOM, leading
to the generic, non-X11 typedefs for the EGL native types. This is
fine for the typical embedded use, but is not what is wanted when
targeting xcb, and leads to disabling EGL-on-X support.
Therefore, move the define into a comon header and let the individual
libs decide by defining or not defining QT_EGL_NO_X11. This sets both
MESA_EGL_NO_X11_HEADERS and WIN_INTERFACE_CUSTOM in qt_egl_p.h.
This way Qt builds supporting all three of eglfs (DRM+EGLDevice),
wayland, and xcb (EGL) can be generated out of the box.
[ChangeLog][Platform Specific Changes][Linux] xcb with EGL and OpenGL
ES, as well as eglfs with the eglfs_x11 backend, are now supported on
DRIVE CX boards when using the linux-drive-cx-g++ device spec.
Done-with: Louai Al-Khanji <louai.al-khanji@qt.io>
Task-number: QTBUG-55140
Change-Id: I6f186d16612e170995e3bca1214bcabad59af08e
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
To make sure it does not end up picking the desktop OpenGL implementation
from Mesa that may be present in the sysroot.
Change-Id: I815eb7d2664f9e62d620acf8260cae40f83dfaf8
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
The config test for eglfs-brcm would fail otherwise on modern Yocto-based
sysroots, as these have no /opt/vc, but have a proper egl.pc that has the
include path and libs.
Task-number: QTBUG-50838
Change-Id: Ibe8dcfbfe9aabe00fd8c040e6e41a4479ccb39bb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
And blacklisted a few tests in tst_QUdpSocket.
Conflicts:
src/android/jar/src/org/qtproject/qt5/android/QtNative.java
src/corelib/global/qglobal.cpp
src/corelib/global/qsystemdetection.h
src/corelib/io/qfileselector.cpp
src/plugins/platforms/eglfs/deviceintegration/eglfs_kms_egldevice/qeglfskmsegldeviceintegration.cpp
tests/auto/network/socket/qudpsocket/BLACKLIST
Task-number: QTBUG-54205
Change-Id: I11dd1c90186eb1b847d45be87a26041f61d89ef6
So that it actually compiles with gcc-linaro-arm-linux-gnueabihf-raspbian.
Remove also flags a device spec should not set (like -std and -O).
Change-Id: Ib7a3bc298e60715410d5c00fbc22199ab4711fa7
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
The rpi3 spec added previously is only half of the story now that we
have the option to use another GL driver.
Change-Id: I1b1edde77bcc6d2f382f1021de9c594c27c34d6f
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
This allows external integrations to be developed against it.
Also uniforms all class names as QEglFSFoo.
Change-Id: I72ff37c0fcdf1ccd37110b4c36874d6c99b2e743
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
This option hasn't done anything for quite some time, let's
get rid of it.
Change-Id: Ic6f2830aaf69ba2d054ce21f0d144a61ddf5d06b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Other popular specs have this as well.
Change-Id: I44245f37857d476b9ee53ecad021261b94214b2f
Reviewed-by: Johan Helsing <johan.helsing@qt.io>
Reviewed-by: Louai Al-Khanji <louai.al-khanji@qt.io>
Right now there are no iMX7 SOCs available with OpenGL capable GPUs
so the mkspec is very basic.
Change-Id: Ia5c83eea72c4d436c774b2955ccd71f2256bfd6b
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
Under Windows, the default paths are not correctly set, hence it's
necessary to explicitly set this.
Change-Id: I9779485115a93bdaf6eb6be87293ca921746bae7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Volker Krause <volker.krause@kdab.com>
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
Describe the platforms better because right now the only difference
is the "pro" tag which is easy to miss.
Change-Id: Ia3e31ed97799bf7f8b76ee3d0bb95c7ded7692db
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Despite the very similar name and hardware, the software stack is
completely different compared to the Jetson TK1 Pro we already have
a mkspec for.
Change-Id: I45353ece195035e961ff47df55d6361569aabb04
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
Which is basically same as the Jetson K1 Pro, with SDK and compiler
options adjusted.
Change-Id: Ic0aa8144aad12e832ae440212f6a06f52668415d
Reviewed-by: Louai Al-Khanji <louai.al-khanji@theqtcompany.com>
Commit 6e6f27b6 made it possible to set the PKG_CONFIG variable using
CROSS_COMPILE as a prefix. The problem with that solution is that it makes
pkgConfigExecutable() skip the environment setup for pkg-config as well,
as it expects the pre-set command to be self-contained - which it isn't.
To avoid this problem we need to store the pkg-config define in the
device spec in a separate variable.
Change-Id: Id8ae7fb03d9253be55840e23fe73b30815ee86c3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
From Qt 5.7 -> LGPL v2.1 isn't an option anymore, see
http://blog.qt.io/blog/2016/01/13/new-agreement-with-the-kde-free-qt-foundation/
Updated license headers to use new LGPL header instead of LGPL21 one
(in those files which will be under LGPL v3)
Change-Id: I046ec3e47b1876cd7b4b0353a576b352e3a946d9
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
A minimal device spec that can be used to build for arm devices.
Change-Id: I4c9949d8cc59ad534fc7617034f6beb40d6a987e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
If CROSS_COMPILE is set on a Debian multiarch platform, then PKG_CONFIG
should be set the same way as the other cross compilation tools.
Change-Id: Id359a6bbdcbf8a136a0268a82301fc086a2adcfe
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Raspbian/Debian require a toolchain with the multiarch patches so we
need to add deb-multi-arch to the DISTRO_OPTS variable for pkgconfig to
work correctly. The Raspberry Pi 1 mkspec has this already and can be
used to build Qt for both versions of the Pi, but the Raspberry Pi 2
mkspec is missing this, and would not be usable in its current state for
building for Raspbian/Debian which is the most popular distro for the
Raspberry Pi.
Change-Id: I6a7a08059f9f91da524b5f51e0697115ef684f30
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
For now we pick one crtc and find the corresponding layer. If this is
not desired, set QT_QPA_EGLFS_LAYER_INDEX to override the layer to be
used. Enable qt.qpa.eglfs.kms to get logs about the available layers.
Change-Id: I762783f960739e32966c8cde17d8f55fbe40091f
Done-with: Louai Al-Khanji <louai.al-khanji@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Louai Al-Khanji <louai.al-khanji@theqtcompany.com>
This will allow us to drop gtk2 support from qtbase in future,
while still providing the gtk2 style for those who want to use it.
Also with moving to qtstyleplugins, the code can be simplified
because we can directly link to libraries we need, instead of using
QLibrary.
[ChangeLog][QtWidgets] Remove QGtkStyle, it is now provided in
qtstyleplugins repository.
Change-Id: I6221b1a513d7fda32e080f3ca159b0b2f8a8f246
Reviewed-by: Timo Jyrinki <timo.jyrinki@canonical.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Jens Bache-Wiig <jensbw@gmail.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Reviewed-by: J-P Nurmi <jpnurmi@theqtcompany.com>
Reviewed-by: Lisandro Damián Nicanor Pérez Meyer <perezmeyer@gmail.com>
Add configure time option to enable boot2qt platform using DISTRO_OPTS.
On embedded, the QtWebEngine is supported only on boot2qt platforms.
To have QtWebEngine CI tested on embedded, we need a way to to enable
boot2qt platform for existing mkspecs.
Change-Id: I218da5b8071041ca1c95eb218b2d552fcc9980d2
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Andras Becsi <andras.becsi@theqtcompany.com>
Use hard float. This has already been the case for the commercial Beaglebone
reference images, it's time to fix the old specs too.
Change-Id: Ic9007285f64a3055fb637e7eacead17cbad1cad4
Reviewed-by: Andrew Knight <andrew.knight@intopalo.com>
Reviewed-by: Louai Al-Khanji <louai.al-khanji@theqtcompany.com>
Including /usr/include and lib can cause cryptic failures if there is
already a Qt installed to /usr.
Having standard locations listed should not be necessary at all.
Change-Id: I08a15a064cc1aec126733f7e1962a2fa2ec38fcb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Andy Nichols <andy.nichols@theqtcompany.com>
eglfs does not depend on the device makespecs anymore when it comes to these device
integration backends (hooks). Instead, backends are autodetected by configure.
The name of the preferred plugin is still set in the device makespecs. This
is optional. When not set and there is more than one plugin present in the system,
the environment variable QT_QPA_EGLFS_INTEGRATION will have to be set at runtime.
In the absence of that, the order is undefined.
Change-Id: Ie1ced2c9aa1beff2adb13b4fdea7c499cb5a6aab
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Andy Nichols <andy.nichols@theqtcompany.com>
Change-Id: Ifc99af49398e5d6e057035d2de55fe218c8418d6
Reviewed-by: Andy Nichols <andy.nichols@theqtcompany.com>
Reviewed-by: Robin Burchell <robin.burchell@viroteck.net>
Cross compilers from latest yocto (dizzy) are no longer built with
default value for mfloat-abi, which means it needs to be given for
both compiler and linker to produce correct binaries. Otherwise
linker will selected dynamic linker as /lib/ld-linux.so.3, instead
of /lib/ld-linux-armhf.so.3 when compiling for hard-float.
Change-Id: I2fe116b1a90a0fbd078a4e8757abd4bc64a7b56e
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
Reasons:
- the PlayBook NDK is old and its compiler does not keep up with newest
C++11 improvements inside Qt code.
- the PlayBook NDK diverges considerably from the standard BB10 NDK,
making it non-trivial to keep a common codebase.
- It's a defunct platform.
- Maintenance time is limited.
[ChangeLog][Platform Specific Changes] Removed BlackBerry PlayBook support.
Change-Id: Ia338aff55f4e4b747ebdecb0e1463a369a656c03
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Bernd Weimer <bernd.weimer@pelagicore.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
The comments at the top are simply out of date. With modern toolchains
-no-gcc-sysroot causes only trouble.
Similarly, enable hardfloat by default.
Change-Id: I80a1319ae26a6e0a8af71e07fbc43478a2b905ef
Reviewed-by: Andy Nichols <andy.nichols@theqtcompany.com>
