The workaround of adding a drive letter to
QT_CONFIGURE_PREFIX_PATH_STR should be done when running on any
Windows host, not only when targeting Windows.
Amends 59c3be7117
Pick-to: 6.1 6.2
Task-number: QTBUG-87580
Change-Id: Ic6ca50aa58a4a54fb483e90fe61a907fe86cb002
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
In a Qt build that was configured with INSTALL_MKSPECSDIR set to
something different than INSTALL_DATADIR, the qmake property
QT_HOST_DATA was wrong. Consequently, mkspecs could not be loaded,
rendering qmake dysfunctional.
The reason was that we considered every QT_HOST_xxx property to have the
same value as QT_INSTALL_xxx in a non-cross build.
This is not true for QT_HOST_DATA, because users might want to set
INSTALL_DATADIR to "foo" but INSTALL_MKSPECSDIR to "bar/mkspecs".
Move the unused determination of the host data dir to the QtLibraryInfo
lib and handle QT_HOST_DATA specially.
Fixes: QTBUG-94591
Pick-to: 6.2
Change-Id: I2c44cda8405ff1d14391254fcd1d9b1361cb5855
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In the CI on a windows we configure Qt with the following prefix
-DCMAKE_INSTALL_PREFIX:PATH=\Users\qt\work\install
Note the lack of the drive letter.
This is intentional, so that we can abuse CMake's DESTDIR installation
mechanism to install into a custom path.
This causes trouble for static Qt builds in the CI.
Specifically when there is no qt.conf file next to qmake, qmake -query
will report a
QT_INSTALL_PREFIX:/Users/qt/work/install
and ultimately qmake will fail to locate the module .pri files in such
a path, showing errors like:
Project ERROR: Unknown module(s) in QT: core gui?
If a qt.conf is placed next to qmake (even an empty one), a differenct
code path is used in qmake to resolve the prefix, which returns a path
with a drive letter.
In a shared build, because the 'relocatable' feature is enabled by
default, a different code path is used and thus the prefix is
also successfully resolved.
So the problem is specific to static Windows Qt builds that have no
qt.conf file next to qmake.
This is the exact scenario that we encounter when running static
Qt tests (tst_qmake in particular).
To circumvent the issue, prepend a drive letter to the prefix
hardcoded into qconfig.cpp. Do that with
get_filename_component(REALPATH) which apparently resolves
to a fully qualified path.
Pick-to: 6.1
Task-number: QTBUG-87580
Change-Id: I17c885f29bfdee45bec1d6aac7c3b26723e761a3
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Now that we're not actually using qmakeconfig.cpp anymore, we can remove
it together with all qmake-related information that was written into
qconfig.cpp.
This also moves the qtConfEntries array back to qlibraryinfo.cpp.
Change-Id: I5e57d8c55613332cc3e57b11df4398d46aed259b
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Those have fixed values.
Change-Id: I7f1ba8036f43413d3c805f4b419ae79e037343fb
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Since the QT_CONFIGURE_HOSTBINDIR_TO_HOSTPREFIX_PATH and
QT_CONFIGURE_HOSTBINDIR_TO_EXTPREFIX_PATH definitions keep the same
value in modern CMake build, no need to have special handling in cases
where these values are used in qmake. Also it will be useful to
specify the relative path to the prefix directory from the directories
different of 'bin' when use QMakeLibraryInfo.
Task-number: QTBUG-75870
Change-Id: I5a777001eb334dcf05e22853a514d4257352d59b
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Move the qmake-specific logic of the QLibraryInfo class to
qmake internals. 'qconfig.cpp.in' now stores information about
the library info entries to keep them consistent between qmake
and the Core library. qmake requires specific features enabled
in the Core library, so building qmake will be skipped if the
features are not enabled.
All flags directly related to the qmake have been removed from
Core lib.
Remove all bootstrap related sections from qmake CMakeLists.txt
Task-number: QTBUG-89369
Change-Id: I26de157d3bfd4a5526699296e9d46e1c180b89ae
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
This will be used to access host tools that are installed in
${prefix}/libexec instead of ${prefix}/bin.
Pick-to: 6.1
Change-Id: I36c4b5736330f8229d267a117c65d55cd5e12758
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
This was needed, when the mkspecs directory was not present in the
non-prefix build directory. That's not the case anymore.
Pick-to: 6.0
Fixes: QTBUG-89182
Change-Id: I2b04c2d857b0af324e1d7c41ed1934a62275d6f1
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We do not have host-specific INSTALL_*DIR variables in the CMake build.
It is equivalent to a qmake build with host prefix = prefix.
Change-Id: I65731e6038508b6c28e3f2819b624ba19abfc82a
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The value of this variable - whithout the mkspecs part - is what's
called the host data dir in Qt5.
Fixes: QTBUG-87681
Change-Id: I3dfeed17e8a614476aef4d9c651a141ce62e6551
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The way we detected whether SysrootifyPrefix needs to be set was
incorrect.
We checked if extprefix == prefix => SysrootifyPrefix should be
true. But that was previously always the case for a non-prefix build,
which means it was not possible to build apps (due to qmake expecting
to find include dirs in the sysroot, despite the non-prefix Qt not
being installed anywhere into the sysroot).
Instead we should do what qmake does. Only set SysrootifyPrefix to
true if extprefix was not provided and a sysroot is available.
To make it work for iOS and Android, the sysroot detection code had to
be moved earlier than the SysrootifyPrefix detection.
Task-number: QTBUG-86053
Change-Id: Idcc1260a675fb2ef9ae27fc9dc42a68b30f763b8
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
The -host prefix was added to the 'preliminary' directory rather than
the actual wrapper shell script. This caused it to be overwritten
every time by the cross-compiled qmake binary.
Change-Id: I103811c6aa9181fa701e3e7ecaf828ecdd1e3c90
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Introduce new CMake variables and map
-D to QT_EXTRA_DEFINES,
-I to QT_EXTRA_INCLUDEPATHS,
-L to QT_EXTRA_LIBDIRS,
and -F to QT_EXTRA_FRAMEWORKPATHS.
Those variables only affect the Qt build, not user projects.
Fixes: QTBUG-85878
Change-Id: I229df2eed1505a2619068d0d32975962b052569a
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
QtBuild.cmake is huge. Split it.
Move module, plugin, tools, executables and test related functions out
of QtBuild.cmake into separate files.
Do the same for many other things too.
An additional requirement is that all the new Helpers files only
define functions and macros.
No global variable definitions are allowed, nor execution of commands
with side effects.
Some notes:
qt_install_qml_files is removed because it's dead code.
Some functions still need to be figured out, because they are
interspersed and depend on various global state assignments.
Task-number: QTBUG-86035
Change-Id: I21d79ff02eef923c202eb1000422888727cb0e2c
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
