We do add, remove or update third party code in minor releases,
sometimes even in patch level releases. However, the documentation is
supposed to be valid for all existing Qt 5 versions, but doing this for
attributions would require infrastructure we don't have.
Therefore rather make it explicit which Qt version the attributions
apply to. Also mention since when Qt is available under LGPLv3
(starting with Qt 5.4).
Task-number: QTBUG-65665
Change-Id: I328b5bf0c143f78ea61aad51f0644c3cbb6dee49
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
If the style changes after the browser already jumped to an anchor,
the resulting browser position will be messed up.
So, after we changed the style we need to make sure that we jump
to the anchor again.
Since browsers do not jump to anchors that they already jumped to,
that means first jumping to the top, then to the actual anchor.
Task-number: QTCREATORBUG-18448
Change-Id: I86c736adab6940903276f8a896b4054ddae11ebe
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
We're only supporting builds with MinGW-w64 these days.
Change-Id: I1198551ba85132c3f0f81e32f11aa149126ca61f
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
When the switching to the non-simple offline style is done after
document load, the navigation to anchors completely breaks. So, do
the switch without the additional delay.
Task-number: QTCREATORBUG-18448
Change-Id: I5abbc3bbe1c743d2a5e493bb9e0916c5d092942a
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
QX11Info class from the Qt X11 Extras module is documented in
qx11info_x11.cpp, and it needs to be parsed.
Change-Id: I32e8415d93e67dbf16267d4af63979c1db0870b0
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
- Qt Bluetooth: Bluetooth Low Energy Heart Rate Game
- Qt Charts: Chart Themes Example
- Qt Data Visualization: Bars Example
- Qt Data Visualization: Surface Example
Task-number: QTBUG-53728
Change-Id: I960532deedc7e24dc5cd3e452ab1908b367e6d8e
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Reviewed-by: Venugopal Shivashankar <Venugopal.Shivashankar@qt.io>
Only example app that demonstrates the use of Qt for a wearable device.
Change-Id: I7656f809b0219e9a2c8cd61985445ecff8b2c174
Reviewed-by: J-P Nurmi <jpnurmi@qt.io>
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
This enables a number of functions declared in the qalgorithms.h to be
successfully documented.
Change-Id: I20c5827bb8f9e2ada98fd368b7827c5b156a518e
Reviewed-by: Martin Smith <martin.smith@qt.io>
This was dropped by commit 740ff1b8 in preparation for clang-based
C++ parser in qdoc. However, the old (current) parser still needs it,
as some of the functions to document are wrapped with those macros.
It does not interfere with the clang parser anyway; unlike the old
parser, clang will not resolve the wildcards in macros.
Change-Id: I3135a263e8eb200a11b1e918c776e3a2c3ec5fb6
Reviewed-by: Martin Smith <martin.smith@qt.io>
Some of the public APIs are still documented in private (_p.cpp)
source files. Let qdoc parse them.
Change-Id: I29ad87c21d663504f2b947d8b9ed76609c7946f3
Reviewed-by: Martin Smith <martin.smith@qt.io>
Since commit bf2160e72c, we can rely on
charNN_t support in all compilers except MSVC 2013, and since that
commit, we use (in 5.10, not 5.9, yet)
!defined(Q_OS_WIN) || defined(Q_COMPILER_UNICODE_STRINGS)
when we only need charNN_t, the type, as opposed to its library
support (u16string, char_traits<char16_t>, ...).
This patch splits the Q_C_UNICODE_STRINGS macro into two, adding
Q_STDLIB_UNICODE_STRINGS for when we need std::uNNstring, leaving
Q_C_UNICODE_STRINGS for when we need just charNN_t support.
In QDebug, when constructing a QChar out of a char16_t, cast to ushort
first, since QChar(char16_t) was only officially introduced in Qt 5.10.
[ChangeLog][Potentially Source-Incompatible Changes] The internal
Q_COMPILER_UNICODE_STRINGS macro is now defined if the compiler
supports charNN_t, even if the standard library does not. To check for
availability of std::uNNstring, use the new Q_STDLIB_UNICODE_STRINGS
macro.
Change-Id: I8f210fd7f1799fe21faf54506475a759b1f76a59
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
qtquickcontrols2-customize.qdoc:28: warning: Can't link to 'Creating C++ Classes'
Change-Id: I7e8e84d7a0d03a84f32d860bc646640e5cf6258f
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
QSysInfo has a customized deprecation directive that QDoc needs to
ignore to generate documentation for the deprecated functionality.
Change-Id: I1c378f14a2f842f1e9a55614d43fe509bb77fd89
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
This macro adds a \youtube <ID> command that embeds a YouTube link
into the documentation.
The video container scales to a specified percentage of the available
horizontal area. It assumes a source aspect ratio of 16:9, but looks
acceptable with other ratios.
For backends that do not support <iframe> (e.g. QTextBrowser), shows
a clickable video thumbnail that open the YouTube link in an external
browser window. Unfortunately, QTextBrowser cannot load images from
a remote URL, so we need to store a thumbnail image in the .qch file.
Change-Id: I3a3a0c5a20dd90e5cec6357ba70a23ee47dbe825
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Reviewed-by: Venugopal Shivashankar <Venugopal.Shivashankar@qt.io>
QDoc reports warnings for every QML code snippet that's not a
complete QML type declaration - ignore these warnings because
in majority of the cases, they're not indicative of any actual
problems in the code.
Change-Id: I53d13e2ae683ca8c5473f68eda17c61199de1ff8
Reviewed-by: Venugopal Shivashankar <Venugopal.Shivashankar@qt.io>
Also add a basic test for constexpr expressions involving QSizePolicy.
GCC < 4.8.0 has problems with initializing variant members in constexpr ctors:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=54922
Instead of revoking its Q_COMPILER_CONSTEXPR, which is a source-incompatible
change, simply note the fact so we can selectively provide constexpr for
QSizePolicy.
Change-Id: Iba8e5a7cdf847d73e8e2b6bb6211fb3c9846aa0a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
clangqdoc can't parse platform dependent source files
because they try to include platform dependent system
include files. e.g., When clangqdoc is run on macOS,
the Windows system include files are not available.
This change adds all the platform dependent .cpp files
to the excludefiles config variable. This means that
qdoc comments are no longer allowed in the excluded
files. There shouldn't be any documentation in these
files anyway. Platform dependent documentation should
be in .qdoc files or in generic .cpp files that do not
try to include platform dependent include files.
Note that .m and .mm files are excluded programatically
in qdoc.
Change-Id: I8f93fe9f5604e558b3df8c8cc8ee723010bf885d
Reviewed-by: Martin Smith <martin.smith@qt.io>
In clangqdoc, we no longer define platform-specific
macros, because they make clang try to include too
much include stuff. Instead, when we have something
like #if defined(Q_OS_XXX) surrounding something we
want clangqdoc to see, we add the Q_CLANG_QDOC macro
like this: #if defined(Q_OS_XXX) || defined(Q_CLANG_QDOC).
This should not be done everywhere Q_OS_XXX is used, but
only where there is some platform-specific things we want
to document.
Change-Id: I97bb57e9b0c044899fa45b0beb02702906d5c89a
Reviewed-by: Martin Smith <martin.smith@qt.io>
The qdoc 'defines' config variable lists values
that contain '*' to represent wildcards, but clang
doesn't accept them. This change adds a new config
variable called 'clangdefines' which explicitly
lists all the defines that match the wildcards.
It also lists several Qt defines for C++11 stuff,
because when clangqdoc comes into use, all the
supported compilers for Qt will support C++11
constructs.
There might be a few defines listed in clangdefines
that are unnecessary and maybe a few that we really
should not include, but we can adjust the list as
needed.
The clangqdoc code that reads this new config variable
will be added in a separate change. This change will
not affect the non-clang qdoc, because qdoc will just
ignore the clangdefines variable.
This change also adds Q_CLANG_QDOC to 'defines' and
to 'clangdefine'. Q_CLANG_QDOC is meant to be used
in the sources the way Q_QDOC is used. It indicates
that a particular use of Q_QDOC has been reviewed and
is still required for clangqdoc.
Change-Id: I3b00b18ec726196eda5cfa8411cd3e87433fec59
Reviewed-by: Martin Smith <martin.smith@qt.io>
Some public functions in QString and QDebug are declared inside
Q_COMPILER_UNICODE_STRINGS. This commit defines it for QDoc, and
adds documentation for QDebug functions that are now visible to
QDoc.
Change-Id: Ia7f2501c1dc7b8244dcc3ce4adcd2019fdbffcb6
Reviewed-by: Martin Smith <martin.smith@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This macro, introduced in Qt 5.8, needs to be ignored by QDoc
in order to generate documentation correctly for a number of
deprecated functions.
Change-Id: I50bcd42167e3fafb7dda88484fde86e1aebb5980
Reviewed-by: Martin Smith <martin.smith@qt.io>
We need to add Q_[ENUM|FLAG]_NS to global qt-cpp-defines doc conf otherwise
qdoc ignores them and it will not produce any documentation or links to
these enums/flags
Task-number: QTBUG-57616
Change-Id: I744317346feb41db02787677f8698c4de15db226
Reviewed-by: Martin Smith <martin.smith@qt.io>
Removed a few from the list after testing them on a
Linux desktop and an Android device.
Change-Id: If1b9e7739d8c374acc8cbd2c72d7176fdff2e9f3
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
The contact patch of a finger on a touchscreen tends to be roughly
elliptical. If we model it as a QRectF, it's not clear whether the
ellipse should be considered to be inscribed in the rectangle and then
rotated, or whether the rectangle represents the outer bounds of the
rotated ellipse. In practice, since most touchscreens can't measure
rotation, it is effectively the latter. But modeling it that way means
information is lost if the touchscreen can measure rotation: you can
determine the bounds of a rotated ellipse, but you cannot derive the
rotated ellipse from its bounds. So it's better to model the axes
of the ellipse explicitly. This has the added benefit of saving a
little storage space: we replace 3 QRectF instances, whose width
and height will normally be the same, with 3 positions (bringing the
total to 12 QPointF's) and one set of axes. Further, most applications
only care about the center of each contact patch, so it's better to
store that explicitly instead of calculating QRectF::center() repeatedly.
In the past there may have been an assumption that the width of the rect is
the same as the horizontalDiameter of the ellipse, so the rect could be
considered to be rotated, and the ellipse to be inscribed. But in
d0b1c646b4 and
40e4949674 the point was made that the rect
is actually the bounding box of the rotated ellipse.
[ChangeLog][QtGui][QTouchEvent] TouchPoint::rect(), sceneRect() and
screenRect() are deprecated; a touchpoint is now modeled as an ellipse,
so please use pos(), scenePos(), screenPos(), horizontalDiameter()
and verticalDiameter() instead.
Change-Id: Ic06f6165e2d90fc9d4cc19cf4938d4faf5766bb4
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
Number of API changes in Qt 5.8 use these macros and QDoc needs to
ignore them the correctly match the documentation to the function
signatures.
Task-number: QTBUG-57424
Change-Id: I0c3a0eb4deb2d9b348f24800591bc6f6b47cf458
Reviewed-by: Martin Smith <martin.smith@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Each supported version control system is described in
more detail in a dedicated topic since version 4.2.
Change-Id: I666f8c18d31954935c836509e572a3bfd2c2a32e
Reviewed-by: Venugopal Shivashankar <Venugopal.Shivashankar@qt.io>
9f45d2ab added a documentation macro for bordered images
- Add the corresponding CSS rules to apply a drop shadow
for such images.
Change-Id: I18c4fbd7498db7b9391f33e568219e67b329e618
Reviewed-by: Venugopal Shivashankar <Venugopal.Shivashankar@qt.io>
Even though the \legalese command is no longer used in Qt 5
documentation as it doesn't support collating legalese texts
across modules, it may still be useful for stand-alone doc
projects.
Add CSS rules so the \legalese text is styled similarly to
code blocks, to make it stand out from the rest of the content.
Change-Id: I533d8e2375ea2f8054c0671ff34dfa6f0dfe01d1
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Reviewed-by: Venugopal Shivashankar <Venugopal.Shivashankar@qt.io>
Commit c5db8fc74 changed all instances of Q_WS_FOO to have the prefix
Q_DEAD_CODE_FROM_QT4 instead, to make it clearer when reading the code
that the code in question was a left-over from Qt4, when we used
Q_WS_ defines instead of Q_OS_ defines.
This worked well for cases of #ifdef Q_DEAD_CODE_FROM_QT4, but less so
for cases of #ifndef Q_DEAD_CODE_FROM_QT4, where the code was actually
unconditionally included.
To make this even clearer, the defines have been replaced by checks for
1 or 0, with a comment describing how the code used to look in Qt4. The
use of constants in the check also makes it easier for editors to parse
the condition and show visually that the code is defined out.
Change-Id: I152070d87334df7259b417cd5e17d7b7950379b7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
that required factoring out the docs installation to a separate project,
as COPIES doesn't work in subdirs projects. it's cleaner this way
anyway.
Change-Id: I594f3ecdae67417511034ab993904c962b86b282
Reviewed-by: Topi Reiniö <topi.reinio@theqtcompany.com>
This macro is used similarly to the \image command; it wraps the image
in a div with class attribute 'border' that allows additional styling
in CSS.
Change-Id: I94271074378d79f0e52f1f5a4715a1f84e0254dc
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Q_NAMESPACE is useful to add Q_ENUM_NS/Q_ENUMS, Q_FLAG_NS/Q_FLAGS and
Q_CLASSINFO to a namespace.
[ChangeLog] Added Q_NAMESPACE which can be used to add Q_ENUM_NS/
Q_ENUMS, Q_FLAG_NS/Q_FLAGS and Q_CLASSINFO to a namespace
Task-number: QTBUG-54981
Change-Id: Ic61b972794063e77134681fb347d6c4acddcdb44
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
