Since going from FullScreen to Maximized is taken care of inside the
FullScreen block then we don't want to call ShowWindow() again in the
Maximized block. Therefore the Maximized block is moved so it is only
invoked if it is not coming or going to fullscreen.
As the minimized case is not accounted for in FullScreen that is left as
is in its own if block.
Task-number: QTBUG-43849
Change-Id: I3141347e072c50b2a4475098d7b8ee0b207578a7
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Signed integer overflow is undefined behavior ([expr]/4),
but unsigned arithmetic doesn't overflow, so isn't
([basic.fundamental]/4, footnote there).
So, use unsigned arithmetic for the loop-around serial
number generation in incrementserial(). While we're at
it, also use it for the masking operation in the same
function.
Found by UBSan.
Change-Id: I500fae9d80fd3f6e39d06e79a53d271b82ea8df8
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Left-shifting of negative values is undefined ([expr.shift]/2).
Since hashValue is a uint already, rectify by casting it->key to
uint prior to shifting.
Found by UBSan.
Change-Id: I94a5311f5a4492f514f595b8fb79726df1e7d0de
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The REHASH macro is used in qFindByteArray() with a char argument.
Applying the shift operator promotes (a) to int. The check in
REHASH, however, checks for the shift being permissible for
_unsigned_ ints.
Since hashHaystack is a uint, too, rectify by casting (a) to
uint prior to shifting.
Found by UBSan:
src/corelib/tools/qbytearraymatcher.cpp:314:72: runtime error: left shift of 34 by 30 places cannot be represented in type 'int'
Change-Id: Id09c037d570ca70b49f87ad22bed31bbb7dcc7fb
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
This manifested itself in a UBSan report about loading a non-enumerated
value from an enumeration variable:
src/testlib/qbenchmark_p.h:95:7: runtime error: load of value 11091, which is not a valid value for type 'QBenchmarkMetric'
(or similar).
The chosen value is simply QTest::QBenchmarkMetric(0).
Change-Id: I8492a871a71d89fa6f7902d38f9eecee4b060646
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The QPageSize-based refactoring led to casting DevicePixel to a QPageSize::Unit
value of 6 (out of bounds). And then the switch in qt_nameForCustomSize
would leave the string empty, leading to "QString::arg: Argument missing: , 672"
warnings.
Change-Id: I85e97174cc8ead9beccaaa3ded6edfad80f8e360
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Selftests for testlib fail when executed in UTC timezone because local and
UTC are the same, but expected to be different. A custom timezone is used
instead.
Debug output of qCompare does only handle local and non-local timezones, using
new Qt5 features allows to show the correct timezone in format string.
Change-Id: I753884a12370952b7b62a90d62896db4f2d3d1b4
Reviewed-by: Jason McDonald <macadder1@gmail.com>
[ChangeLog][Widgets][QMacStyle] Fixed a possible divide by zero crash.
Task-number: QTBUG-43398
Change-Id: I8b5c6fd87d07eb42ad43e8c2405b7cad19372b86
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
Fixes an issue where under certain circumstances, QSslSocket could get
stuck in a state where it would disconnect immediately after starting
encryption. Since it doesn't make any sense for the socket to be
initialized to a state where any connection attempt will fail, the
pendingClose value should be set to false.
Thanks to Martin Sandsmark for his help debugging this issue.
Task-number: QTBUG-43793
Change-Id: I7deebacbac588c21439a8e594db4222095cf3f22
Reviewed-by: Richard J. Moore <rich@kde.org>
Fix regression introduced by e4becdc3d3
Add QPlatformDrag::ownsDragObject() function, QDragManager can use the
return value of this function to decide if it should take care of deleting
QDrag object or platform plugin will take care of deleting QDrag.
XCB platform plugins uses async dnd data delivery mechanism. It allows
user to drop something and then continue working with the assurance that
the target will get the data regardless of how slow the network connections
are, which means that a source window should preserve QDrag data until
dnd has finished.
Change-Id: I1fbad7380cddec98b756698993dd397409833150
Task-number: QTBUG-43436
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Apparently on some cards, that only provide OpenGL 1.4,
the check for OpenGL 2 specific functions is not sufficient
(presumably some old extensions provide the functions and so
the test passes, even though it really shouldn't)
To avoid crashing the apps later on, we should check the
context version and activate the fall back to ANGLE if it's
below 2.0.
Task-number: QTBUG-43870
Change-Id: Id0e3d8ad1f632334ba03bbb1a4802413f28436dc
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
This version was based on Clang mainline between releases 3.1 and 3.2,
which means it has part of 3.2 features but not all. One of the missing
features is __builtin_bswap16.
Change-Id: Ic5d393bfd36e48a193fcffff13b95664c7f664de
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Output the current active/modal/popup windows when receiving
FocusAboutToChange or FocusIn events.
Task-number: QTBUG-42731
Change-Id: Ia88e9a9b41f7c80fb7a2a048b06da56d989ff18a
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Since openssl 1.0.1k with enabled option no-ssl3-method we need to
check for OPENSSL_NO_SSL3_METHOD to use following functions:
- SSLv3_method
- SSLv3_server_method
- SSLv3_client_method
Change-Id: Iee83a6f4bacbf5660baa6bdb89eb02ceb9f11614
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Style sheets that refer to the progress bar (like
"QProgressDialog[maximum='0']{}") may dereference a
null-pointer during the styleHint() call in QProgressDialogPrivate::init()
since the progress bar has not been created yet.
Move the creation of the progress bar closer to the
top of init(), before the styleHint() call.
Change-Id: I31c3c1c346430fc9fe86b0977403dea0c0dc5e90
Task-number: QTBUG-43830
Reviewed-by: Andras Becsi <andras.becsi@theqtcompany.com>
[ChangeLog][QtPrintSupport] Fixed QPrinter::{width,height} return values
when the resolution is changed in the print dialog.
Task-number: QTBUG-43124
Change-Id: Ib805907affed4b1ffb48e6b1ff89f7a79ab3e329
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Until now, QSqlQuery::execBatch did not call resetBindCount, which lead
the next call to QSqlQuery::addBindValue to start at non zero index.
This is problematic in case of a prepared query which is called several
times.
Task-number: QTBUG-43874
Change-Id: I1a0f46e39b74d9538009967fd98a269e05aac6f2
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
When using the cross-compiler toolchain for 32 bit on a 64 bit machine,
qmake generated a 64 bit VS project.
This was because qmake didn't know about the amd64_x86 cross-compiler,
and qmake did not use the first MSVC bin directory it found in PATH.
Task-number: QTBUG-43457
Change-Id: I50c6f7bb9afe44a58321c670d680dbcc7cd07223
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The current work-flow for adding app icons to an
iOS app during deployment is not good. You basically
need to specify that you want to use asset catalogs
from within Xcode and add your icons there. The
problem is that qmake will regenerate the Xcode project
the next time it runs, and your changes will then be lost.
This patch will check if the project has a valid asset
catalog assigned to QMAKE_BUNDLE_DATA, and configure
the Xcode project to use it for app icons.
Change-Id: I06621ca46aad91de96cb23ba8ca3b1a3f1226670
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Font hinting depends on the specific pixel size, and ends up very
wrong when the painter is scaled.
Change-Id: I2007ec7e7ad8d52358d76e88e030ea4df7e91455
Task-number: QTBUG-43809
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Rectangles need to be mapped differently depending on what they are
used for. Expose events need to cover the entire geometry, so they must
be rounded up, potentially increasing the size. If we use the same
conversion for window geometries, it is possible to end up with a
feedback loop if the window reacts to the new size.
Task-number: QTBUG-43743
Change-Id: I7881cc77bf2148fed2ae743c4226617a61197434
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
This test requires test data to be available and the
testRetainSizeWhenHidden test assumes that a widget will be
sized based on its sizeHint(), which does not work on
platforms where show() implies showMaximized().
Change-Id: I9bf372d8c0ea94845ae08481ec555fe25dcfebc0
Reviewed-by: BogDan Vatra <bogdan@kde.org>
This test needs to have a test environment available on the regular
file system, so we create this when initializing the test. In
addition we QEXPECT_FAIL one of the tests which seems to expose
a legitimate bug. A bug report has been created for this.
Change-Id: I7c90aea78a067815cb647a51db5d91a652a9fc1c
Reviewed-by: BogDan Vatra <bogdan@kde.org>
On Android, the HOME and TMPDIR environment variables both point
to the application sandbox, whereas the QSideBar test assumed
they were different. We work around this simply by creating
a new directory and using this as the test dir in place of the
home directory.
Change-Id: I67e01926b901ddf237b05aff116d30b6c7885535
Reviewed-by: BogDan Vatra <bogdan@kde.org>
This requires building a command line tool and running it using
QProcess, which is not a supported deployment option on Android.
Change-Id: I795374bf809a8e4d8634a55f5ebf1699ee9745d1
Reviewed-by: Christian Stromme <christian.stromme@theqtcompany.com>
The auto-hinter in the FreeType version bundled in Qt gives
slightly different advances on some glyphs. As noted in
the removed code, this was already observed on Windows and QNX,
and recently also on Android.
I'm sure it could also happen on platforms using the system library
if the system library was the same version as the one bundled in Qt.
Instead of expect-failing the test, we simply accept both the
observed results as valid.
Note that we need to accept 9 as a result for the default hinting
preference on all platforms, not just Windows, since the default
hinting preference in FreeType can be a system setting.
Change-Id: I3cc0f33f0f66dd64419770b37c10dee457706b5e
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
The files for the test have to be included in a qrc to be available on
Android.
Most of the image files are already in a qrc, but a couple were missing.
We add this in a separate qrc to avoid interfering with the tests on
other platforms.
Change-Id: Ibb24f5015a1aba4d5622e14f7aae80bc18611ec4
Reviewed-by: BogDan Vatra <bogdan@kde.org>
The value of pdwEffect passed to IOleDropTarget::Drop() is always
the one with which the drag was initiated.
Task-number: QTBUG-43466
Change-Id: I045fef634b55d4f113b393aa0ad4aa15d37db372
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
The algorithm searches for all executables in search path starting with
"tst_". Tests are not named like the folder they are contained in
anymore.
Change-Id: I360f293e43e30292fe0ae6230fd3ec7abf3d632d
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
When compiling tst_qpathclipper with MinGW:
In file included from QtGui/private/qpathclipper_p.h:1:0,
from tst_qpathclipper.cpp:33:
src/gui/painting/qpathclipper_p.h:469:29: warning: 'static QPathEdge::Traversal QWingedEdge::flip(QPathEdge::Traversal)' redeclared without dllimport attribute after being referenced with dll linkage
inline QPathEdge::Traversal QWingedEdge::flip(QPathEdge::Traversal traversal)
^
qpathclipper_p.h:474:29: warning: 'static QPathEdge::Direction QWingedEdge::flip(QPathEdge::Direction)' redeclared without dllimport attribute after being referenced with dll linkage
inline QPathEdge::Direction QWingedEdge::flip(QPathEdge::Direction direction)
Change-Id: I38feb07d693768285c1d405b3fc92a58c3309547
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Check and warn in that case.
Change-Id: Ic513334b5aa48e1c7e44685c30da3e9be52c3c52
Task-number: QTBUG-43833
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
Introduce flags for the renderer type and move code to
qwindowsopengltester. Introduce
QWindowsOpenGLTester::supportedGlesRenderers() where type-dependent
checking can be added.
Change-Id: I4bbffaf861cb0fdbea0919e081e3626fb5a872de
Task-number: QTBUG-43263
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
Compile qwindowsopengltester on all platforms and add struct
GpuDescription with detection method based on IDirect3D9 (dynamically
loaded).
Expose as a QVariantMap-property to QWindowsNativeInterface to be
able to access it from qtdiag.
Task-number: QTBUG-43263
Change-Id: I3c6cd0bbbe36465e0e05f7064ecfc943d6ea4101
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
Bump copyright year in tool output and user visible strings to 2015.
Change-Id: I9b29907fe3f555e78005cb296a49d92f601fb7ec
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Martin Smith <martin.smith@digia.com>
isnan is C99 and POSIX.1, which the older MSVC do not support. Use the
Qt equivalent.
Change-Id: Ic5d393bfd36e48a193fcffff13b8679cb83d12db
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
QDateTimePrivate::setDateTime has a comment saying this is intentional,
so document it.
Task-number: QTBUG-43704
Change-Id: Ic5d393bfd36e48a193fcffff13b965409eaf7be9
Reviewed-by: Martin Smith <martin.smith@digia.com>
When programatically setting a text selection on iOS, we
call [UITextInputDelegate selectionWillChange] to report
the change. If auto correction is enabled, UIKit will then
reset the current tracking, and for some reason tell us to
clear the selection. This is contradictory to us
saying the the selection is about to change, and will
cause an unwanted recursion back to Qt.
Since there seems to be no way to stop UIKit from doing
this, this patch will instead add a guard that refuses
to change the selection recursively while processing
a selection change from Qt.
Task-number: QTBUG-43716
Change-Id: Id487a57cdda55d7e2d09c3efc14c7f03f566f15a
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Wheel events should not cause a popup widget parented on a scrollable
widget to be closed or moved to correctly reflect the system behavior
on OS X and Windows.
Task-number: QTBUG-42731
Task-number: QTBUG-40656
Change-Id: I4ef75aa8331390309c251316ac76db2cf9ec51f7
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
