The vast majority is actually switched to QRandomGenerator::bounded(),
which gives a mostly uniform distribution over the [0, bound)
range. There are very few floating point cases left, as many of those
that did use floating point did not need to, after all. (I did leave
some that were too ugly for me to understand)
This commit also found a couple of calls to rand() instead of qrand().
This commit does not include changes to SSL code that continues to use
qrand() (job for someone else):
src/network/ssl/qsslkey_qt.cpp
src/network/ssl/qsslsocket_mac.cpp
tests/auto/network/ssl/qsslsocket/tst_qsslsocket.cpp
Change-Id: Icd0e0d4b27cb4e5eb892fffd14b5285d43f4afbf
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Auto-reset events are automatically reset to non-signaled when we get
notified about the signaled state. This implies that we cannot check the
event state again in activateEventNotifiers. Instead, store the signaled
state in a QAtomicInt and test and decrement that.
This amends commit 85403d0a.
Task-number: QTBUG-63555
Change-Id: I0adee3d2929783f98d91060f9106c8b5266d72fa
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Convert QSysInfo/QOperatingSystemVersion to __builtin_available where
required or possible, or to QOperatingSystemVersion where
__builtin_available cannot be used and is not needed (such as negated
conditions, which are not supported by that construct).
Change-Id: I83c0e7e777605b99ff4d24598bfcccf22126fdda
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Remaining uses of Q_NULLPTR are in:
src/corelib/global/qcompilerdetection.h
(definition and documentation of Q_NULLPTR)
tests/manual/qcursor/qcursorhighdpi/main.cpp
(a test executable compilable both under Qt4 and Qt5)
Change-Id: If6b074d91486e9b784138f4514f5c6d072acda9a
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Remaining uses of Q_DECL_OVERRIDE are in:
src/corelib/global/qcompilerdetection.h
src/corelib/global/qglobal.cpp
doc/global/qt-cpp-defines.qdocconf
(definition and documentation of Q_DECL_OVERRIDE)
tests/manual/qcursor/qcursorhighdpi/main.cpp
(a test executable compilable both under Qt4 and Qt5)
Change-Id: Ib9b05d829add69e98a86238274b6a1fcb19b49ba
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
This test sets up two timers:
- a 100ms recurring timer
- a series of 10 200ms single-shot timers.
After quitLock lets exec() return it then uses a signal
spy to check if the 100ms timer fired at least 17/20
of the times it should.
However there is no guarantee that the 100ms timer
will fire more often than the 200ms timer. If the
native timer callbacks happen at 500ms intervals then
Qt will fire both timers (once) at that interval.
In practice this seems to happen on macOS CI under
system load and/or with the test app napping.
The primary goal for the test is to verify that exec()
returns when it should; we can remove the timer signal
spy.
Remove testQuitLock from BLACKLIST.
Timely timer:
524429311.389913 runLoopTimerCallback
524429311.389979 200ms fire
524429311.389997 100ms fire
524429311.490056 runLoopTimerCallback
524429311.490130 100ms fire
524429311.589752 runLoopTimerCallback
524429311.589929 200ms fire
524429311.589976 100ms fire
Delayed timer:
524429428.690887 runLoopTimerCallback
524429428.691002 100ms fire
524429428.691143 200ms fire
524429433.692103 runLoopTimerCallback
524429433.692205 100ms fire
524429433.692331 200ms fire
Change-Id: Iff4faaa1de3741cf4e217949d5ed17d4e70c6af2
Task-number: QTBUG-61499
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
A nullptr QVariant should become a null QString or QByteArray,
since null strings have previous in our APIs represented the null value
in the absence of a dedicated null metatype.
Change-Id: I3b8f6386ece314d7c196959fbcf042c4fe0508a0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Changes the QVariant::isNull() implementation for
pointer types so they return true if null.
[ChangeLog][QVariant] QVariants containing pointers will now return
true on isNull() if the contained pointer is null.
Change-Id: I8aa0dab482403837073fb2f376a46126cc3bc6b2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Update documentation to be clearer on the special null variant state
with no value as opposed to a variant with a null value, and only block
conversions of the former.
Change-Id: I24fd50285414e049de87de54a63700a89bd5adf1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QWinEventNotifiers were limited to 62 instances, because of
WaitForMultipleObject's limitation to MAXIMUM_WAIT_OBJECTS - 1 handles.
Use the RegisterWaitForSingleObject API which does not have this
restriction and executes waits in threads managed by the system. A
central manual reset event per event dispatcher is signaled in the
RegisterWaitForSingleObject callback and waited for in the event loop.
Task-number: QTBUG-8819
Change-Id: I3061811c18e669becf9de603bbdd7ba96e4d2fcd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
This test verifies processEvents(WaitForMoreEvents)
behavior by first processing all pending events (in
a loop) and then verifying that a following processEvents
call actually waits.
But there is no guarantee that the OS won’t introduce
more events after the first loop has completed. This
does indeed seem to happen on recent versions of macOS.
Change the test to not require that the processEvents
call blocked and de-blacklist.
Task-number: QTBUG-61131
Change-Id: Ic8fa74a6085165442791264f6f137a2fa6083138
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
QVariant claims to be able to QVariantHash and QVariantMap, but the
actual conversion implementation is missing.
Task-number: QTBUG-61471
Change-Id: I0cba74642aa77dc423effed289bc7619922a89eb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fixed crash on QCoreApplication::translate() call from qqmlThread while
QCoreApplication::{install,remove}Translator() is called from the GUI
thread.
[ChangeLog][QtCore][QCoreApplication] Calling
QCoreApplication::translate() is now thread-safe.
Task-number: QTBUG-57095
Change-Id: Ie5340a42040a829f311c01332e05d4bbaf60462c
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
tst_qvariant.cpp(80): warning C4309: 'initializing': truncation of constant value
tst_qvariant.cpp(4635): warning C4309: 'initializing': truncation of constant value
tst_qbytearray.cpp(1438): warning C4267: 'argument': conversion from 'size_t' to 'uint', possible loss of data
tst_qbytearray.cpp(1440): warning C4267: 'argument': conversion from 'size_t' to 'uint', possible loss of data
http2srv.cpp(64): warning C4018: '<=': signed/unsigned mismatch
tst_qinputdialog.cpp(352): warning C4804: '<=': unsafe use of type 'bool' in operation
Change-Id: Id012d88b7b20c5c9f128f2ef53753cc1d479f358
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It breaks sth in QLocalSocket which is used in QtRemoteObject.
This reverts commit 5c6210e345.
Task-number: QTBUG-61668
Change-Id: Ib11890923773496e5d998b7709ef93b0a839a759
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
QWinEventNotifiers were limited to 62 instances, because of
WaitForMultipleObject's limitation to MAXIMUM_WAIT_OBJECTS - 1 handles.
Use the RegisterWaitForSingleObject API which does not have this
restriction and executes waits in threads managed by the system. A
central manual reset event per event dispatcher is signaled in the
RegisterWaitForSingleObject callback and waited for in the event loop.
[ChangeLog][QtCore][QWinEventNotifier] QWinEventNotifier is not
restricted to 62 instances anymore.
Task-number: QTBUG-8819
Change-Id: I2c749951453a4b699cc50dada0d6017440b67a4a
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Use M_PI (and friends), where possible, in favor of hand-coded
approximations of various (in)accuracies. Where that's not available
(e.g. fragment shaders), use the same value that qmath.h uses for
M_PI, for consistency. Replaced math.h with qmath.h in places that
defined a fall-back in case math.h omits it (it's not in the C++
standard, although M_PI is in POSIX); or removed this entirely where
it wasn't used.
Reworked some code to reduce the amount of arithmetic needed, in the
process; e.g. pulling common factors out of loops. Revised an
example's doc to not waste time talking about using a six-sig-fig
value for pi (which we no longer do) - it really wasn't relevant, or
anything to be proud of; nor did the doc mention its later use.
Task-number: QTBUG-58083
Change-Id: I5a31e3a2b6a823b97a43209bed61a37b9aa6c05f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Randomly timeouts in the CI.
Task-number: QTBUG-59679
Change-Id: I28410b747b2033fc0ef6286a11c88cd0c07eb247
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
The binary hangs rather than segfaults on that platform.
Task-number: QTBUG-59936
Change-Id: Id7d38edb7c746e3c0cd4b4941e0e19b3d42a628a
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
They have been blacklisted on windows previously and now fail on
macOS 10.12 as well.
Task-number: QTBUG-60993
Change-Id: Ib7a3acfc7f2285c0a587d4abd88a4a218391d623
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Limitation is that the signal needs to be parameter-less
[ChangeLog][moc] moc now supports NOTIFY signals of parent classes in Q_PROPERTY
Change-Id: Iad64c96c3ec65d4be8ad9ff1a9f889938ab9bf45
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Brett Stottlemyer <bstottle@ford.com>
The test has been observed to be flaky on Windows. Introduce
QTRY_VERIFY_WITH_TIMEOUT for diagnostics.
Change-Id: I72abdd2e5544f8f35199876486ab15151f60e5f2
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
On winrt, the default application version is determined by its
manifest file. The template's default version is 1.0.0.0.
Additionally addRemoveLibPaths should not fail if libraryPaths
only contains currentDir.
Change-Id: Ifdd517f1bfe2fdf641f3d728ebe1fa144df1a8ca
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Found by GCC 7.
Change-Id: I90267617a038558e5b5213c598a949baf8d4d9be
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The conditions checked are compile-time conditions anyhow.
Simplify or strenghten a few conditions while at it.
Change-Id: If07f2aedca4c3632d852a8fdb2b3f7eb55a96c93
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: James McDonnell <jmcdonnell@blackberry.com>
There were still two cases where spurious notifications would be
possible:
- user calls hasPendingDatagrams()/pendingDatagramSize() on UDP
socket somewhere outside the slot connected to readyRead()
signal (::WSARecvFrom posts FD_READ notification, even if
a notification for incoming datagram already exists in the
message queue);
- a socket was registered to receive several types of event and
WM_QT_ACTIVATENOTIFIERS message is located between the
different events for this socket in the queue.
Provided patch ensures that the message queue is synchronized with
the Qt event processing mechanism and adds a way to detect spurious
notifications inside the window procedure.
Task-number: QTBUG-58214
Change-Id: I49609dace601f300de09875ff1653617efabd72f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
This allows the use of move-only function objects
Task-number: QTBUG-60339
Change-Id: If3595fca338cf7f3039eb566cc02e4e73cd04c86
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This was simply not working for two reasons:
- The index passed to QMetaObject::metacall was not right (there was an offset
because of the return type)
- If the registration succeeded, the arguments were not even initialized.
The tests in tst_moc always called QMetaMethod::parameterType before calling invoke,
which was properly registering the type. So this was not seen in the tests before.
[ChangeLog][QtCore][QMetaMethod] Fixed crash in invoke() with QueuedConnection and
types whose metatype gets automatically registered.
Task-number: QTBUG-60185
Change-Id: I4247628484214fba0a8acc1813ed8f112f59c888
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
8a375341cf added swap() to QJson* classes
and marked them shared-not-movable-until-qt6.
That unveiled a broken test in QVariant which was relying on QJsonDocument
being not relocatable. So fix the test by using a proper datatype for the task.
Change-Id: Ic35f09f936b00dfaeb368ccb42aecf35cc506029
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
