open() to "|-" and "-|" are unsupported on Windows (see `perldoc
perlport'), so don't do that.
Let the tests write a 'config.log' file which contains the output
of the test commands.
Brings back the part fixing the pipe logic from commit
f865dc1ae4 which was reverted.
Change-Id: I5060a0885702d925001b98f2d4e84743d6ff226e
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
open to "|-" and "-|" are unsupported on Windows (see `perldoc
perlport'), so don't do that.
Rather than parsing the output of make to decide if a config test is
skipped, use a looser definition: it is skipped if qmake and make both
succeed, but no binary is created.
Change-Id: Idab7266888e9c934aa7b5c1c6ac5930439681107
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
QtDeclarative was recently split into two modules, with the
QtQuick(2)-specific API moved to QtQuick. While strictly speaking
the old API wasn't "Qt 4", it's more convenient to modify this
script than to create a separate one.
For example, "QtDeclarative/qquickitem.h" will now be changed to
"QtQuick/qquickitem.h".
Change-Id: I50b32d60cfd21e3c49ee4222fbd6116f80eac25b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
QT_MODULE_BASE is exclusively used to refer to the top-level source
directory of a module. However, in non-developer-build mode (used
only when the build path is not equal to the install path), syncqt
would incorrectly set the value of QT_MODULE_BASE to the build
directory. This caused all $$QT.<module>.sources variables to point
to the wrong place.
Make it always point to the source directory.
Change-Id: I401cf000f9e3a4ab97d68db40330bb98aec25a9a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
When renaming classes, or when moving classes from one module to
another, it's useful to have a simple way of supporting the old
API/location for some time. To this end, syncqt shall now recognize
a "deprecatedheaders" section in sync.profile. It looks like this:
%deprecatedheaders = (
"QtDeclarative" => {
"qquickcanvas.h" => "QtQuick2/qquickcanvas.h",
"qquickitem.h" => "QtQuick2/qquickitem.h",
"QQuickCanvas" => "QtQuick2/QQuickCanvas",
"QQuickItem" => "QtQuick2/QQuickItem",
}
);
In the above example, syncqt would generate a header called
qquickcanvas.h for the QtDeclarative module; when included, this
header will issue a warning and include <QtQuick2/qquickcanvas.h>.
And so on, for the other entries.
Deprecated headers are installed along with the module's normal
headers.
Change-Id: Ie2518b42275c2b2ff44216f07d376ccf5be6dc45
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
The forwarding headers in 'include/Qt' were deprectated in Qt 4. This is
Qt 5, so time to remove them.
Change-Id: I4bf3797475b91f58af1761ed4165b552613299b3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
- Add --strip-module option to strip the module name for portable
code
- Use GetOpt::Long
- Streamline, remove need for rewinding the file
- Streamline output, just report affected classes and introduce
--verbose for normal operation.
Change-Id: I8643a5f53d4ed8ce2ae44721164cbdba1aad8b46
Reviewed-by: Harald Fernengel <harald.fernengel@nokia.com>
We look for a regular binary, but Mac OS X produces application bundles
by default. Instead of looking for an app bundle as well, we unify things
a bit by disabling app bundles instead.
Change-Id: I5eb173d98e893e616f23b91f13282cf95ef4f56a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Use a perl script with a slightly better scalability. No more
quadratic behavior, takes about 10 seconds (instead of 5 hours)
on my machine to fix all QtCreator headers
Change-Id: Ic7d00c28aec390a1da27a969ece5d8102674e919
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use non-greedy capturing where it makes sense, also
keep the user's whitespace indentation in his include statements
Change-Id: Iff2b5dabf443529292e943ae69427bd15e702bf9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Each directory is separated by a ';'. The syntax was chosen over the
regular perl [] syntax as ';' was used already in other places.
Change-Id: I7a07a1facb7c08d7a9de6ec45ad57f6057cb0150
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
After the regexs in qtmodule-tests were fixed in the same commit it is
no longer necessary to explicitly add the include statement. Any
existing content unrelated to config tests is preserved.
Change-Id: I90bab6b838191f050204992aa45262212b937059
Reviewed-on: http://codereview.qt.nokia.com/4296
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Michael Goddard <michael.goddard@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Qt modules with config tests generate a module level .qmake.cache with
the results of the config tests. The existance of this file prevents
qmake from walking up the directory tree and finding the Qt global
cache file. This results in the system build not working as expected.
For example running 'make' in the module would only build the contents
of src and skip tests and examples.
Fixed by adding a include statement to the end of the config test
generated .qmake.cache.
Change-Id: I68a5f2a96f4ee02076b6457ae085f45d894cd4ed
Reviewed-on: http://codereview.qt.nokia.com/3830
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Michael Goddard <michael.goddard@nokia.com>
This adds Aaron's copy of V8 to src/3rdparty/v8 (as a
git submodule), and builds it as a "normal" Qt library
(without any dependencies on Qt itself).
The library can be added to a project with
QT += v8-private
V8 API headers are available as private includes, e.g.
#include <private/v8.h>
The API is private because we're exposing a third-party
API directly, and we don't want to (and cannot) make
source or binary compatibility guarantees for it.
Since we want the V8 public API headers to be private
headers in Qt, syncqt and sync.profile were extended to
understand a new configuration option, the
@allmoduleheadersprivate array, that tells syncqt whether
all the library headers should be treated as private even
though they don't follow the _p.h Qt convention.
The V8 project files, patches and autotests are copied
from the QtDeclarative repository. The next step after
this commit is to remove QtDeclarative's copy of V8 and
link with QtV8 instead.
Task-number: QTBUG-20963
Change-Id: Ib8820362cdbc8fa662a5e97db841656cf38d1b62
Reviewed-on: http://codereview.qt.nokia.com/3092
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Could use || but it's only used for an if test anyway.
Change-Id: I97fe251ab4f27fb75981af12316aaf5da053d47a
Reviewed-on: http://codereview.qt.nokia.com/3431
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Create a libQtPrintSupport library that contains our current
printing infrastructure. Long term this will get replaced
with a libQtPrint, as the current architecture is not
really maintainable.
Change-Id: I7362fff6786b58c5b4e9213c23eda36d15048aa2
Reviewed-on: http://codereview.qt.nokia.com/3209
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
If sync.profile points to a location that does not exist in the
%modules section, the version header cannot be written.
Report the error clearly so this problem can be identified.
Change-Id: Ib681087f46362487ffb621221d33cf9b7e54df2f
Reviewed-on: http://codereview.qt.nokia.com/2761
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Michael Goddard <michael.goddard@nokia.com>
We need this to avoid syncing certain files in QtDeclarative on
Windows.
Change-Id: Ia9fc95262ac18bafc39efc038ea70a1b5d67cddd
Reviewed-on: http://codereview.qt.nokia.com/2641
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
And try to fail a bit more gracefully if it isn't.
Change-Id: I62e01c0536aa0a032940d6a9a5ccf5edcfeef221
Reviewed-on: http://codereview.qt.nokia.com/2109
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Michael Goddard <michael.goddard@nokia.com>
Try a lot harder to remove the old $TARGET output, since make
clean isn't sufficient. Also fix a bug in program invocation
that was hidden because of the stale files.
Change-Id: I0a365409d81efb74c5836eaf9f129fd9b2cca77e
Reviewed-on: http://codereview.qt.nokia.com/2052
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
An extra script is added (qtmodule-configtests) which is currently
invoked from syncqt (with some derived parameters passed to it).
The module can optionally have an entry in the module's sync.profile
file in the form of a perl map of "test name" => parameters. Tests
can print an advisory message if they fail (e.g. "Install this
SDK/dev package"), or abort the syncqt process (e.g. mandatory
prereq missing). Also, if the test has a "requires(foo)" line
that results in it being skipped, this is also supported.
Change-Id: Ic3c820a488a0992c944994d4d7dc283da36742d6
Reviewed-on: http://codereview.qt.nokia.com/928
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Sarah Jane Smith <sarah.j.smith@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
Makes it easier to track which library output is coming from,
when building Qt with -j > 1.
Change-Id: I9acda04e84014dc441e409a0b24b2f78762dcc1c
Reviewed-on: http://codereview.qt.nokia.com/1765
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
By default, syncqt will now compress the console output of what it's
doing. Increasing the verbosity level will make syncqt output the same
as before
Change-Id: I542072504f022f87997b4036eda5747a5da88839
Reviewed-on: http://codereview.qt.nokia.com/1764
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Also add a fixme, since the version headers are currently
being created in the source directory.
Change-Id: If6e9eeba854a1f35561b69518eb8739dc28a58be
Reviewed-on: http://codereview.qt.nokia.com/1763
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
We need the content of the generated module master headers to be
reliable, so rebuilding in the same environment doesn't produce
different results. This minimizes the diff from package building
systems.
Change-Id: Ic914f56e13b11f313f01f6b8666c2d28aa50a985
Reviewed-on: http://codereview.qt.nokia.com/1900
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Arvid Picciani <arvid.picciani@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
We use syncqt to generate .qmake.cache also for submodules, which
contains the location of forwarding module profiles for that module.
This enables us to build without having to put module profiles into
mkspecs/modules until install time.
Also added support for -developer-build to syncqt.
What it does is to point build directories for binaries and
libraries to a common location in QtBase. This is more
convenient when doing development, since you don't need to set your
path to every module's bin/ directory, but it cannot be used with
release builds, since they need to build independently of QtBase,
in their own directory.
Change-Id: I959c62c11c644f2147a98da894a72452d9c44327
Task: QTBUG-19585
Task: QTBUG-19583
Reviewed-on: http://codereview.qt.nokia.com/232
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
We need to move the detection up above the general -no-* match,
otherwise it never hits.
Change-Id: I04ab5a1ed2c4a01219e7b9e10948b3fc4989f4b8
Task: QTBUG-19585
Reviewed-on: http://codereview.qt.nokia.com/228
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
