The old code in QtActivityDelegate.updateHandles() and
EditPopupMenu.setPosition() could use size of EditPopupMenu.m_view to
calculate position of context menu before that size was calculated
during an asynchronous layout pass. In particular m_view reports size
0x0 when context menu is opened for the first time after start of the
application. In this case the context menu was displayed on top of the
text editor instead of being displayed above it.
This patch fixes that problem by moving all positioning code from
QtActivityDelegate.updateHandles() to EditPopupMenu.setPosition() and
adding an OnLayoutChangeListener which calls setPosition() again each
time the size of m_view changes, including when it changes for the first
time from 0x0 to a real value.
Change-Id: I670fef811a4dcba5524f7520ea41a47978dd10f1
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
The old code used size of m_cursorView to calculate position of the
cursor handle popup. But since on Android layout process is
asynchronous, both width and height of m_cursorView was 0 upon first
call to setPosition(). This resulted in selection handles being
initially displayed at a wrong position for a fraction of second and
then quickly moving to the correct position. In some cases handles
stayed at the wrong position until touched by user.
This patch replaces use of m_cursorView's size with use of m_popup's
size. Width and height of m_popup may be used immediately because they
are explicitly assigned in initOverlay(). The size of m_popup should be
always equal to the would-be size of m_cursorView because of how it is
calculated.
Change-Id: I9868c9a5ce0103d8328b2478cf82feaceba7f404
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
Implicit copy constructors or methods are considered deprecated for
classes that has one of the two or a destructor.
The warning is enabled with -Wextra in gcc 9
Change-Id: Ic9be654f2a142fb186a4d5a7d6b4f7d6f4e611d8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The file system appears to cache too aggressively, so if the reported
storage size doesn't change after flushing to disk, ignore the failure.
Change-Id: Iba7dce79591447fac296bfe92c2dc993d36d0c2a
Fixes: QTBUG-69868
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When we trace a scope, then we pass the scope args to the _entry trace
point. There is no need to do that also for the _exit trace points, it
just blows up the trace data for no obvious gain. Any decent tracing
consumer can easily find the args for the _exit call by matching it to
its _entry call.
Note that this is standard practice in trace points, and also done like
this in the Linux Kernel trace points for example.
Change-Id: I273293b0c7e799767acc1960b50ab675fc765a36
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use Q_TRACE_SCOPE and the corresponding naming scheme. Additionally,
don't change the behavior of the code when tracing is enabled, i.e.
continue to return early if possible.
Change-Id: I9ba9679869db1541a19bc832beede902224c52f2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The remaining diff to clean 1.6.37 is archived in the qtpatches.diff file.
[ChangeLog][Third-Party Code] libpng was updated to version 1.6.37
Change-Id: I589bff09beec1977be8c6ca2a60aadf05f337f38
Reviewed-by: Liang Qi <liang.qi@qt.io>
Added a sentence to explain how a .qmake.cache file influences the project root.
Task-number: QTBUG-21411
Change-Id: I97766edd96851f1c988ab07f842fb81a339e4ecd
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Change mentions of parameter value being "zero" to nullptr.
Clarify that when nullptr is passed to moveToThread() event processing
is stopped because the object is no longer associated with any thread.
Also, reitarete this fact in the paragraph about processing of new
events.
There's an exception to the rule that QObjects cannot be "pulled" by
moveToThread that is buried in the implementation and not mentioned
in the doc. This information is worth noting explicitly.
Change-Id: I816ff737c48d8057b39e36b566079710aeb8e690
Reviewed-by: André Hartmann <aha_1980@gmx.de>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The helper in QOpenGLDebugLogger did not account for the extra "KHR"
suffix in the function names and results in a crash when ANGLE is being
used. This commit fixes this issue.
Change-Id: I439d8bfc53b010be5410286b86c090aff171aaef
Fixes: QTBUG-62070
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
CreateCursor only works with standard sizes (32, ...) depending on the
display hardware. No longer apply the scale factor for the blank cursor, because
it might lead to unsupported cursor sizes resulting in random pixels.
Change-Id: I48d84bd913d2dd8f62129126c9a41e58ee2cbcae
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The sysrootification of QMAKE_INCDIR_OPENGL on macOS must happen only
once. Commit 49ef3773 addressed this but stored the sysrootified
QMAKE_INCDIR_OPENGL in qt_lib_gui_private.pri. For installer packages,
these paths are the paths of the build machine and most likely wrong
on the user's machine.
This reverts commit 4949ef377349ba4dae840c2d5caa36e2d516707baa and
restores the sysrootification in sdk.prf. The original include paths
are assigned to QMAKE_EXPORT_INCDIR_OPENGL and stored as
QMAKE_INCDIR_OPENGL in qt_lib_gui_private.pri.
Fixes: QTBUG-75374
Task-number: QTBUG-73736
Change-Id: I4c0f65866d60660c632363dba3adc7ea2e344bfc
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
QFile::copy() didn't have the syncToDisk() call that QSaveFile::commit()
has. So add it.
[ChangeLog][QtCore][QFile] Made QFile::copy() issue a filesystem-
synchronization system call, which would make it less likely to result
in incomplete or corrupt files if the system reboots or uncleanly shuts
down soon after the function returns. New code is advised to use
QSaveFile instead, which also allows to display a progress report while
copying.
Fixes: QTBUG-75407
Change-Id: I95ecabe2f50e450c991afffd1598d09ec73f6482
Reviewed-by: Henrik Hartz <hhartz@gmail.com>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
If this plugin is loaded at some later point during application
run-time, the focus object might be nullptr. We can avoid that by
using qApp->focusObject(), when m_focusObject==nullptr;
Task-number: QTBUG-74465
Change-Id: I0d82410ed557ea1a8fde28a1807f790854951cda
Reviewed-by: Johan Helsing <johan.helsing@qt.io>
Don't go into an infinite loop breaking pages, when an image is about
as large as the page. Correctly take top and bottom margins into account
when calculating whether the image could fit on one page.
Amends change 416b4cf685.
Fixes: QTBUG-73730
Change-Id: Id311ddf05510be3b1d131702f4e17025a9861e58
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Fix warnings
qtbase/src/corelib/io/qprocess.cpp:776: (qdoc) warning: Class CreateProcessArguments has no \inmodule command; using project name by default: QtCore
qtbase/src/corelib/serialization/qcborstream.cpp:1441: (qdoc) warning: Class StringResult has no \inmodule command; using project name by default: QtCore
Change-Id: I1c85ca32aff1f89f70898af7b11cfead96c80349
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
...and other slight modernizations and minor fixes.
Change-Id: Ide587d9fe59ca9113ae775882c99a50debaf9000
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Using getaddrinfo, which implements RFC 6724, implies that addresses
that are not needed will be trimmed. In particular, IPv6 addresses are
often not returned.
Also move the implementation detail documentation down in the text, it's
a detail with little relevance for the usage of the class, but makes for
a good opener regarding this behavior.
Change-Id: I516a64f0b39a6a06621a63c1d5236544b7758049
Fixes: QTBUG-31865
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Otherwise, AppKit, while rendering 'detached' (not in any view hierarchy)
controls and cells will use NSAppearance.currentAppearance, which is not
guaranteed to be the same as NSApplication.effectiveAppearance.
Task-number: QTBUG-74515
Change-Id: I82dcebf2230932ecfcbf33c422a3b7bd0aed61d7
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Keep spinning the main event loop if we can't acquire the semaphore,
this way the Android UI thread can post events on it.
Fixes: QTBUG-74076
Change-Id: Ia87e0535f94c67728176918ab928ff5ce8b00f8e
Reviewed-by: VaL Doroshchuk <valentyn.doroshchuk@qt.io>
There is an effort to make KDE software accessible, which exposed the
missing roles. Check that they are complete with an assert.
Change-Id: Ibaff0a90e1cee316983569ecee7759a13212e3c3
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
When building in a unix style build system (i.e. msys), QMAKE_DIRLIST_SEP
is a colon, not a semicolon. Thus, always split the incoming string
(after the fixup regex) using semicolons on windows.
This matches the code for gcc, further up, which does:
equals(QMAKE_HOST.os, Windows): \
paths = $$split(line, ;)
else: \
paths = $$split(line, $$QMAKE_DIRLIST_SEP)
Change-Id: I6a0175f9d14ae9ca188553483b7868f0549c784a
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
stdcpp-path is needed to set the correct stdc++ library in libs.xml file.
This reverts commit 1366c4f046.
Change-Id: I79b398c5d97c1e98bf503ef7b95b2e9f0f18bc11
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
Images in an ico file contains transparency information stored as a 1
bit mask. However, when the depth is 32 bit, it means there is an
alpha channel present, and the mask should be ignored. The Qt ico
handler failed to do that. This has gone unnoticed, since the mask in
such images is typically set to all 0s, and so makes no difference to
the result. But ico files exist that contain junk mask data, so fix
the reader to ignore it properly.
Fixes: QTBUG-75214
Change-Id: I1b4456d71689ec783076a582f2fb215e7dc56e62
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The full stroker does not produce good results for aliased lines
thinner than 1 pixel. Avoid it by making sure that such thin lines
are painted by the cosmetic stroker, even when they have
non-uniform transformation.
Fixes: QTBUG-73866
Change-Id: I7b5f0fa555903246e0c3fd92cd435cc8c0b15a24
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The dash stroker did not check for inf/nan coordinates.
Fixes: QTBUG-47887
Change-Id: I1e696cd15cc37d8fcb6a464cac3da33c3a8b95c2
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
We don't support CMake version 2 anymore. Instead of just updating
to a newer (but fixed) version let's link to the latest
documentation. This might create a bigger risk that links get
stale, but hopefully let people find always the latest information.
Task-number: QTBUG-72159
Change-Id: I082de80cf9ee107b5d017ab8ad6369f2448b0e1b
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
QDateTime's short names setUtcOffset() and utcOffset() have been
deprecated since 5.2, in favor of setOffsetFromUtc() and
offsetFromUtc().
QDate's shortDayName() and shortMOnthName() have been deprecated since
5.10, in favor of QLocale's dayName() and monthName(). Also, the
tests that were using them are testing methods only present when the
datestring feature is enabled; so condition them on that feature.
Change-Id: Ibfd4b132523ca8fbc1cb163353a44e0500877fd5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The grep given in the help from the program to process the
effective-TLD list only worked for voodoo reasons.
Replaced it with an actually-correct use of grep.
The commands given used the name effective_tld_names.dat in the URL
fetched; however, the relevant file has (for some time now) said
explicitly "Please pull this list from, and only from
https://publicsuffix.org/list/public_suffix_list.dat"
Changed the name used to match that URL.
Revised the output file's suggested name and the instructions for what
to do with its contents, making clear they *replace* what was there
before ...
Fixed some typos and related ugliness.
Change-Id: Iacd186c0003227d657099716262eb3a89c9e5f1b
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This is a regression introduced by 63967313f5 which blocked signals
on the view, but not on the model.
Change-Id: Ib2f93fe6ef842264aaba200c98ee4a19065ca220
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Konstantin Shegunov <kshegunov@gmail.com>
Reviewed-by: Laurent Montel <laurent.montel@kdab.com>
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Valid indexes cannot have children, in a table model, so there's no
point in asking the model about it (by calling rowCount and
columnCount).
Change-Id: Ic2d7b52538a7b67acb2c35b26e69bba5956ef5af
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
The provided API uses Xlib types, so it should publicly link with Xlib.
Fixes: QTBUG-75045
Change-Id: Ifea1e8df27cdcc57fb04cd68a7aa1e9fa339c53d
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
If columns are removed and we get notified via layoutChanged, the code
tries to restore old section sizes, and went out of bounds, leading to
an assert in QVector. Simply add an if() to skip restoring out-of-bounds columns.
This comes from https://bugs.kde.org/show_bug.cgi?id=395181,
which translates into the unittest that is part of this commit.
Change-Id: Ide42176a758f87b21957c40508127d67f1d5a2d9
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
This fixes the "could not parse compiler option" warning when
generating VS project files.
Fixes: QTBUG-75275
Change-Id: Idd98ae5fdb8ebf5a4e311cbb6cd3ed1daba74ca4
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
For gcc's -I and -L arguments a = prefix is replaced by the sysroot.
Since we're resolving include paths and library paths, we have to
support this feature.
For example, the linux-rasp-pi3-g++ makes use of this and is broken
without this patch.
Change-Id: Ie39e63322bd35e2a93aa8e55d52260164b8c6a6b
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Injected headers were made relative to MODULE_BASE_OUTDIR by syncqt
and made absolute by resolving against REAL_MODULE_BASE_OUTDIR.
This breaks for modules that reside outside the original Qt source
tree (if the directory depth doesn't coincidentally match).
Now, we resolve injected headers against build_basedir, which is
REAL_MODULE_BASE_OUTDIR. To emphasize the equivalence of
REAL_MODULE_BASE_OUTDIR and syncqt's build_basedir, use the former for
syncqt's -output argument.
This commit amends 2aa779e8.
Fixes: QTBUG-70587
Change-Id: I2935d87d7ee681fa4aa795a270b94ab7a43abe59
Reviewed-by: Dominik Holland <dominik.holland@pelagicore.com>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
