If more than one VM tries to run the test at the same time, it times out. These
sharing violations were attempted to be worked around in 1c3dc8cfb, but the
workaround just leads to timeout, not success.
Task-number: QTQAINFRA-1727
Task-number: QTBUG-66216
Change-Id: If8bfd60dbb6575843680971d45b1c82e5beff534
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
The idea behind this code was to check, whether no
button was pressed. !isPressed only checks, whether
XButton2 was pressed though.
Change-Id: I358816fa62d230abf82116f0da7bc3a5e43fbaf6
Reviewed-by: Andre de la Rocha <andre.rocha@qt.io>
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
With the previous implementation mouseLeave events were
broken as we did not remember, which window was initially
affected by events and naturally there was no window under
the mouse for these events.
Now we save the currently affected window and use this
information for leave events.
Change-Id: I4036ce5e6621b507232d258dbb54c7f40a345899
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
If the mouse button is released outside of a window,
we did not trigger a mouse release event.
Task-number: QTBUG-66088
Change-Id: I3ef6234cc922c8c59ac3aa6350783fae4ba36bda
Reviewed-by: Andre de la Rocha <andre.rocha@qt.io>
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
With the previous implementation the detection of the
affected window (windowAt which uses QWindow::geometry)
only worked for the upper left quarter of the window,
when used on a High DPI screen. As QWindow does not use
native positions, the mouse cursor's position has to be
mapped before checking the window under the mouse.
Change-Id: I1a30b9669ec3e4c573cf83aed57c20d65675ff16
Reviewed-by: Andre de la Rocha <andre.rocha@qt.io>
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
If the QLoggingRegistry gets called as part of the static initialization
phase, it would call into Android's QStandarPaths implementation, which
assumed that the HOME env. variable was already set. Since the variable
isn't set before main is called, QDir::homePath() returns the root path,
which would be cached and always returned.
With this fix we now call Android's getFilesDir() directly, which will
always return the right path. Since the font locations are also relying
on an environment variable being set, we no longer cache that either.
Task-number: QTBUG-65820
Change-Id: If45f3d5f0e87b808a62118ae95c31b492885646a
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
(cherry picked from commit eadf9e542f)
The backend will do the aborting. The handler doesn't need to do it.
Task-number: QTBUG-66295
Change-Id: I3debfc11127e4516b505fffd151166d4a8e9ec53
Reviewed-by: Martin Smith <martin.smith@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Change-Id: I5ae02d88aa3dcd97d1f2ebf6255a68643e5d6daa
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
[ChangeLog][Android] The application and dependent Qt libraries are
now loaded on the same thread as main() is run on, ensuring that global
static initializers, constructor functions, and main() are all run on the
same thread. The same applies during application shutdown, for destructors
of global objects, and destructor functions.
Change-Id: Id4bfece1ed2a0532ed2e8fb7d8ffd6e55d5a10dc
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
[ChangeLog][QtCore][QSaveFile] Fixed an issue that would cause
QSaveFile::commit() to fail if Unix signals were delivered at the same
time.
Task-number: QTBUG-66268
Change-Id: I3debfc11127e4516b505fffd151148e70662cd5e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: David Faure <david.faure@kdab.com>
This means willLogToConsole does not need to consider the boostrapped
case anymore.
Change-Id: I088245362cd46c582a2a08225d22e4d2e4645c06
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Makes for a less awkward logic without any if (0) etc.
Change-Id: I3db0984c5a0bbf1615c2feb2ebef59b4ec16e9ae
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Likely fail is 3d29a0dd74. Is preventing
merge from dev, so blacklisted for now.
Task-number: QTBUG-66324
Change-Id: Ieb522897e93d4a1b4c0e423fadd4138dfb089093
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Conflicts:
src/corelib/tools/qvarlengtharray.qdoc
src/corelib/tools/qvector.qdoc
Resolved documentation changes in favor of 017569f702,
which keeps the move overloads along with its const-ref sibling.
Change-Id: I0835b0b3211a418e5e50defc4cf315f0964fab79
QtTestLib has its own message handler installed via qInstallMessageHandler,
so there is no need to set QT_LOGGING_TO_CONSOLE to force stderr output,
as that's what QPlainTestLogger::outputMessage uses anyways.
And in the case of using other testlib outputs such as XML, we're not going
to hit any of the code paths that would check QT_LOGGING_TO_CONSOLE.
The only relevant exception is Windows, which checks stderrHasConsoleAttached(),
which is affected by QT_LOGGING_TO_CONSOLE, but Qt Creator actually has an
explicit inversion of this existing code, to prevent it from setting
QT_LOGGING_TO_CONSOLE, so that output ends up in OutputDebugStringA
and can be read and distinguished from the debugger's output.
See QTCREATORBUG-16161.
Change-Id: Ia8a9b00b221ec5691b52485586f172c9261bf299
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The former is the preferred way in Qt to exclude code that shouldn't
be built for bootstrap tools. For qlogging.cpp this includes the
bootstrap library, and qmake, both of which have QT_BOOTSTRAPPED
defined.
Change-Id: I94b669aae308786eded92b30b5e3f63add069756
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This test was blacklisted in 5.10 on opensuse, but it fails a lot on
ubuntu as well. While we are discussing a real fix for this, temporarily get this out of
the way.
Task-number: QTBUG-63152
Change-Id: I4f1d3b261013052636ee13eda30f94b647a43a38
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The peer Tests for QDBusAbstractAdaptor are so flaky that it's
very difficult to get any commits through to qtbase.
Task-number: QTBUG-66216
Change-Id: I8da80f71aa832e683f72129cb2d4785425d39c00
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Sami Nurmenniemi <sami.nurmenniemi@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
When calling setSceneRect() on a QTouchPoint it will cause the
ellipseDiameters to be changed, whereas this should not be affected by
the scene rectangle as it should be in logical pixels.
Also add a manual test for visually checking the ellipse diameters on
various devices.
Change-Id: I1ee9207cb1a63cfef33fe904594c73aba221af5c
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Change-Id: I784965dda64551e6093af817881aa6472d2cc226
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Timeouts with subsequent failures to delete the temporary
directories have been observed in COIN.
Previously, QProcess:terminate() was used to end the processes,
which does not have any effect on console processes on Windows.
Add a helper function which resorts to kill() on failure
to terminate().
Change-Id: I05539d1703280d34b392f2e8ff8565b9a04d703c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In order to save having to always run a query to get the tablename for
a known oid then we cache the result on the driver side. The oid stays
the same while the table exists, so only on dropping it would it change.
Recreating the table causes it to get a new oid, so there is no risk of
the old one being associated with the wrong table when this happens, if
the driver is still open at that point.
The benchmark added shows the improvement from the previous code, before
the results for PostgreSQL was:
RESULT : tst_QSqlRecord::benchmarkRecord():"0_QPSQL@localhost":
259 msecs per iteration (total: 259, iterations: 1)
whereas now it is:
RESULT : tst_QSqlRecord::benchmarkRecord():"0_QPSQL@localhost":
0.000014 msecs per iteration (total: 59, iterations: 4194304)
Task-number: QTBUG-65226
Change-Id: Ic290cff719102743da84e2044cd23e540f20c96c
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Robert Szefner <robertsz27@interia.pl>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
3d02e75c07 was too quick, and didn't account for the fact that the
old code had early returns for each alternate logging sink, so when
removing the qt_logging_to_console() check, we would end up writing
debug output twice.
This is due to e.g. Qt Creator running the application without a
console, so qt_logging_to_console() returns false, so we end up
in e.g. the win_message_handler(), calling OutputDebugString,
but then we unconditionally print to stderr, which Creator
also reads, so we end up with duplicated log messages.
Change-Id: I91573828576608643477ae27d36d7e819f92985d
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If we are logging to the console, we should _not_ log to slog2, like
the other log backends.
Change-Id: I6d16704c0f0923f54b3dc030d374af9805c2af06
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This fixes various problems that occur because the current egl context
assumes OpenGL ES 2.0 and does not support newer versions of ES.
Task-number: QTBUG-64306
Change-Id: I81466ba5cf028b47ca5a2ebcdc702167aff655a2
Reviewed-by: James McDonnell <jmcdonnell@blackberry.com>
Blending can fail if one of the input buffers is destroyed in the middle of the
streaming operation. In that case, turn streaming off so blending can be
attempted again after disabling the input.
Change-Id: Id5c82b22a2ed0858ab20902395830efa0e64177d
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Flushing the QPA event queue is problematic since we can then end up
delivering several events to Qt (or the app) at the same time on the
call stack. This again can easily leave objects in an inconsistent
state if they receive callbacks from subsequent events while being
occupied processing the first.
This is also what happens in the listed report. A QMenu shows
a sub menu when the mouse enters a menu item. The show leads to
QPA flushing events, which in some cases also includes flushing
another pending move event. The move event is delivered to the
same QMenu, which will clear a private variable (currentAction).
When the show returns, the state of QMenu has unexpectedly
changed, which causes a crash to happen since currentAction is
null.
This patch will fix the root cause of the problem by
stopping QCocoaWindow from flushing user input events when
the call location does a flush to deliver geometry events.
Task-number: QTBUG-66093
Change-Id: Id277550b0a080ad98c81e8c30dc7098dc73723d5
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
[ChangeLog][Third-Party Code] Sqlite was updated to version 3.22.0
Change-Id: I341c1cabfdd43fac45406c00c33c193ef4bcf402
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
On Android, we load the application library, and its dependencies (Qt),
on Android's main thread (thread 0), and then spin up a secondary
thread (thread 1), that we call main() on.
If any QObject is constructed during loading of the application library
or any of Qt's libraries, via static initializers or constructor
functions, we will set QCoreApplicationPrivate::theMainThread to
thread 0, which will confuse Qt later on when it's being run on
thread 1, and will result in a warning during QCoreApplication
construction:
QApplication was not created in the main() thread
This situation can easily lead to a crash as well.
Unfortunately logging via qDebug/qCDebug and friends will trigger
this too, as they internally use QObject.
Fixing the root cause of this is under investigation, but for now
we will partially revert fa2a653b3b for Android. The effect
is that any qCDebug with a "qt.*" category before qApp construction
will turn into a no-op, like it was before fa2a653b3b.
This patch does not cover the case of a regular qDebug, or a qCDebug
with a non-Qt category. Those will still produce the same symptom,
as before fa2a653b3b.
Task-number: QTBUG-65863
Change-Id: I95675731d233244530d0a2a1c82a9578d5599775
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
(cherry picked from commit 538b1b5076)
QFontEngine::cloneWithSize() is used by QRawFont internally when switching
a raw-font from one size to another using setPixelSize. For CoreText, we
use a subclass of QCoreTextFontEngine to keep track of the QByteArray data
of a raw-font, but failed to overload cloneWithSize, so we would lose the
data whenever setPixelSize was called, resulting in missing text rendering
in QtWebKit. We now retain the data as we should.
Task-number: QTBUG-65923
Change-Id: I7d4186a3c32a61d48d1e9388e43f2792e8e46081
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
The target position is passed in physical native pixels, so call
QPlatformWindow::mapToGlobal() instead of QWindow::mapToGlobal().
The latter operates on logical pixels.
Task-number: QTBUG-55251
Change-Id: I789128a0a345d4113fced82ed1b215fe14044634
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
With object_parallel_to_source the workaround of making copies of the
files and using these is no longer needed.
Debug2.h and .cpp were added to the repository by mistake and should not
have been there in the first place.
Task-number: QTBUG-66059
Change-Id: Ib9dbd15be1dee1cb5190762fe06bad56dd40dd47
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Some compilers will assume src and buffer are different and only
vectorize the unaliased case and take a slow path when they are equal.
In our case they are as often equal, so we need to manually unalias the
variables to make sure both cases are fully optimized.
Change-Id: I6ec86171dd179844facdf45376253c55980d9e36
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The target position is passed in physical native pixels, so call
QPlatformScreen::availableGeometry() and QPlatformWindow::mapToGlobal()
instead of QScreen::availableSize() and QWindow::mapToGlobal(). The
latter two operate on logical pixels.
Task-number: QTBUG-55251
Change-Id: I281f47baee727bc0f4738fd6d6cdf12c9f462b0f
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
