Adds a configure check for System V and POSIX IPC.
System V takes precedence over POSIX IPC, and if both
are not supported, QT_NO_SHAREDMEMORY and
QT_NO_SYSTEMSEMAPHORE are defined.
This patch is a forward-port from 4.8 branch
(6ef4abaa9cd7d465cbae5cbf8cb4664bef387d10).
Change-Id: I3ec20342f0f0266843479634109b67c6989dd296
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Commit a2da88712f was incomplete. Though
it did enable building of QtDBus without the libdbus-1 headers, but it
still kept looking for it. We don't need to do it anymore if CFG_DBUS is
the default (runtime), so skip the actual check.
This commit does not change behavior. All it does is skip the D-Bus
tests if we're about to use dlopen'ed libdbus-1.
Change-Id: I3947443c9ef6cc409cb6b154564f8af6fb5de84e
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
When CFG_DBUS != "no", we enable the build of linuxaccessibility in
src/platformsupport, which requires QT += dbus to work. When no dbus
headers are found, CFG_DBUS is set to runtime, which means we'll
enable a11y but "dbus" will not end up in qconfig.pri and therefore
src/dbus is not built at all (and not before platformsupport). Therefore
the build in platformsupport breaks.
So even if CFG_DBUS is set to "runtime" we need to make sure that dbus appears
in qconfig.pri.
Task-number: QTBUG-43205
Change-Id: Ibbe5e66552226cdcc1ce16fb83556406f3bb0e09
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Supports relative pointer, axis, keyboard and touch events.
libinput support is only available in combination with libudev.
libxkbcommon is required to perform key mapping. For now the
default keymap is used always (selected when building xkbcommon).
[ChangeLog][QtGui] Added a plugin to get mouse, keyboard and touch events
via libinput.
Change-Id: I469d8992c0cd3e79225cefaeb931697baf86a92b
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
... and use it with the opengl compile tests.
Change-Id: I402574be332e41c721a758e63a233d193224f16b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The compile.test script expects -I... parameters. Passing just the
include path is therefore wrong. Pass cflags instead.
Change-Id: I0f9b155d1e710fe7d77c64a867a89290d4f31db3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Most of QtDBus already needs very little from libdus-1, so create an
extra header containing the minimum API we actually need.
One large advantage of this solution is that now QtDBus can always be
enabled, even if the system doesn't have libdbus-1 installed. This is
interesting on OS X, where libdbus-1 is often installed by Homebrew or
MacPorts, which may include extra libraries we don't want in our
packaging.
Change-Id: I1b397121ec12eeca333ef778cf8e1c7b64d6b223
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Conflicts:
dist/changes-5.4.0
7231e1fbe2 went into 5.4 instead of the
5.4.0 branch, thus the conflict.
Change-Id: I70b8597ab52506490dcaf700427183950d42cbd1
There was an override for Android which would disable the configure
error when doing an OpenSSL build without having the headers
available. This has several times lead to packaging errors where
OpenSSL gets disabled but it's not noticed before the package testing,
which delays the process.
I'm not 100% sure of the reasoning behind the override, but I think
it's a left-over from Necessitas where OpenSSL was statically linked
into Qt.
Change-Id: I2bdc33fb60c59cd493987959d4bbbbb4e9735a92
Task-number: QTBUG-42851
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Reviewed-by: BogDan Vatra <bogdan@kde.org>
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The new default compler is gcc 4.9, it is needed to compile
64 architectures.
Change-Id: I7ccbac7615b6dc20f5b0441908590de7d4a2e8cb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Paul Olav Tvete <paul.tvete@theqtcompany.com>
The change was made too late in the 5.4.0 release
cycle, and broke the Qt build and deployment in
several areas:
- macdeployqt
- OS X 10.7 builds
- shadow builds
This reverts commit c0a54efc40.
Change-Id: I1c1ad4901228f5516352ccdfa963e8ea2b5013b6
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
configure script has been silently accepting whatever flags that begin
with "-feature-" even if the feature name does not exist at all.
Since the script validates many other flags, this behavior can make
users believe flags they supply is valid when it isn't.
Besides, this option is currently not protected against typo in any way.
This commit verifies those flags against content of
"qtbase/src/corelib/global/qfeatures.txt" and fails if supplied
flag is not a valid feature name.
Change-Id: Ib19ec66dd5558fb5491e8e080ce07d4807d94c1f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Apple will from February 1, 2015, require all applications uploaded to
the App Store to be built for both 32-bit (armv7/s) and 64-bit (arm64).
https://developer.apple.com/news/?id=10202014a
We enable fat Qt binaries by passing both -arch armv7 and -arch arm64
to clang, which takes care of lipoing together the two slices for each
object file. This unfortunately means twice the build time and twice
the binary size for our libraries.
Since precompiled headers are architecture specific, and the -Xarch
option can't be used with -include-pch, we need to disable precompiled
headers globally. This can be improved in the future by switching to
pretokenized headers (http://clang.llvm.org/docs/PTHInternals.html).
Since we're enabling 64-bit ARM builds, we're also switching the
simulator builds from i386 to fat i386 and x86_64 builds, so that
we are able to test 64-bit builds using the simulator, but we're
keeping i386 as the architecture Qt is aware of when it's building
for simulator, as we need the CPU features to match the lowest
common denominator.
Change-Id: I277e60bddae549d24ca3c6301d842405180aded6
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Defaulting to absolute_library_soname on configure -rpath is no longer
necessary as now we support @rpath install name ids on OS X and iOS.
This also sets QMAKE_SONAME_PREFIX to @rpath for Qt modules when built with
rpath configuration.
This makes Qt libraries relocatable on OS X. Qt SDK is not yet relocatable
though, because plugin location (including cocoa plugin) is still resolved
using absolute path (see QTBUG-14150), also there are several absolute paths
hardcoded in qmake mkspecs pri files.
Task-number: QTBUG-31814
Change-Id: Ie9dffefcd2a946c1580293d433621c1adb7e06c4
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
We set the variables to empty when we start processing, so ${FOO-foo}
will never print "foo". We need to use ${FOO:-foo}.
Change-Id: I00c28edb10d8eaa09df689905a302b576b246806
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Fixup after d44781730c, which would override whatever the user passed
on the command line.
Change-Id: If4d260801866ff53de3e6dfd6d37016fd8453d8d
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
GCC and Clang support compiler intrinsic error detections tools:
address, memory, thread, undefined
Let users conveniently enable it in qmake, for instance with
CONFIG += sanitizer sanitize_address
Also add a -sanitize [...] option to configure to use it by default
for both the Qt libraries, and user applications.
[ChangeLog][configure] Added support for GCC/Clang -fsanitize= options
Change-Id: Ie5418abcdf41842566df510d7707e41739e66f87
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The code which extracts style assets for the Android style
is licensed under the Apache license, which is not compatible
with LGPLv2.1. It is, however, compatible with LGPLv3. This
means that the Android platform plugin cannot be LGPLv2.1
as long as this code is included.
To minimize licensing confusion, we default to only providing
LGPLv3 for Android. If you want to build a LGPLv2.1-compatible
library, you can add -no-android-style-assets to the
configuration. This will in turn enable the LGPLv2.1 in
the configure output, and it will disable the extraction
code in the platform plugin.
Running the Android style with an LGPLv2.1-compatible platform
plugin will work, but it will look horrible.
[ChangeLog][Android] Default open-source license for
Qt for Android is now LGPLv3. For compatibility with the LGPLv2.1
license, add "-no-android-style-assets" to your configuration.
Change-Id: I6c7b52140f38138520871fa7c69debbb4ee90e6c
Task-number: QTBUG-41365
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Christian Stromme <christian.stromme@digia.com>
This license file has to exist, since much of the code is licensed under
LGPLv3.
Change-Id: I2795a7cc62f6de65a35921e38d2ab5f8f0233f71
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
We don't have an explicit XPLATFORM_OSX, but XPLATFORM_MAC applies
to both OS X and iOS (as now clarified), so we move the default
out of the XPLATFORM_IOS scope and to a XPLATFORM_MAC scope.
Change-Id: I6b9ba9c881c28def08b9ab863d0165fbd9dedc6d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Gestalt is deprecated so we can't use it long term. At the same time,
the new API is cross platform, so we'll no longer have to parse strings
in -[UIDevice systemVersion] either.
Change-Id: Ic81797174c1a3d50b47b9b209205a6a506cc75ef
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
qmake variables using $$system() were incorrectly parsed by the custom
qmake parser in the configure script, when using GNU awk 3.1.8 or
earlier. They are parsed correctly with GNU awk 4 or mawk.
This was occurring with such an assignement (from an extra mkspecs file):
QMAKE_CC = $$system($$CMD QMAKE_CC 2>/dev/null)
The custom qmake parser in the configure script first attempts to
expand $$UPPERCASE variables, before running $$system(), using this:
match(value, /\$\$(\{[_A-Z0-9.]+\}|[_A-Z0-9.]+)/)
But when using non-ASCII locales with GNU awk 3.1.8 or earlier,
$$system was expanded (to an empty string) because these earlier awk
versions match lowercase letters for the [A-Z] regexp, which is
traditionally used to match uppercase letters.
This behavior has been changed in GNU awk 4.0.0, which only matches
uppercase letters for [A-Z] by default. A workaround for earlier GNU
awk versions is to run awk with the C locale.
See GNU awk NEWS "Changes from 3.1.8 to 4.0.0":
25. Gawk now treats ranges of the form [d-h] as if they were in the C
locale, no matter what kind of regexp is being used, and even if
--posix. The latest POSIX standard allows this, and the documentation
has been updated. Maybe this will stop all the questions about
[a-z] matching uppercase letters.
THIS CHANGES BEHAVIOR!!!!
See also gawk.info "A.7 Regexp Ranges and Locales: A Long Sad Story"
Change-Id: Ibb3eb28738c3e77d496c634e1f5c9f630957e730
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fixes missing space before `]` in test condition introduced in 8d57725338.
Change-Id: I741c291677f32056a0a0bec12cb4d9fd293a2021
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][Important Behavior Changes] HarfBuzz-NG is now the default
shaper on all platforms. This results in a better shaping results
for various languages, better performance, and lower memory consumption.
Task-number: QTBUG-18980
Change-Id: I4d9454fc37e9050873df3857e52369dfc7f191b2
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
If the user requested the system xkbcommon with -system-xkbcommon, then
don't silently fall back to the bundled version if the functionality
test fails. Instead, print the an error notice.
Also note that the -xkbcommon argument didn't do anything, since it set
the variable to "yes".
Change-Id: I2c9e820bd076995aaaad987ecce76ebddcd79b4a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
We no longer support the maemo/meego platform, so we can remove the
specific code for that platform.
Change-Id: Ia7f0730eba2d96794b97b7ca4753f63a2d7bc2a8
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
This code hasn't been tested for at least 4 years. It's not maintained
and probably doesn't work.
Change-Id: I4b9a5179e34111b400914f91caa6b741b69771bb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Building QtDBus on Linux host for QNX target had two issues:
* Configure check failed, because dbus-1 library was not linked in,
if target platform doesn't support pkg-config.
* Host tools were not built, because pkg-config was not used to locate
dbus headers on the host.
Task-number: QTBUG-37324
Change-Id: I71d8309599fd40ef2dd8c9e3b44b93a7482019f1
Reviewed-by: Rolf Eike Beer <eb@emlix.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
We don't actually detect whether the compiler can create Neon code or
provides Neon intrinsics. Most of them do, so that test would be mostly
moot. We removed the detection previously because we couldn't
automatically enable Neon due to leakage of instructions outside the
areas protected at runtime.
Instead, we rely on the mkspec properly passing the necessary flags that
enable Neon support.
This commit does not change that. All it does is verify whether the arch
detection found "neon" as part of the target CPU features. In other
words, it moves the test that was in simd.prf to configure.
It does fix the Neon detection in configure.exe, which was always
failing for trying to run a test that didn't exist
(config.tests/unix/neon).
Change-Id: Id561dfb2db7d3dca7b8c29afef63181693bdc0aa
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This patch adds the feature use_gold_linker to use the gold linker that
has been part of of GNU binutils since 2008. Gold links C++ libraries
much faster and use less memory.
The feature is autodetected when building Qt on Linux, but can be disabled
in configure. On MingW builds it is default off but can be enabled for
cross builds.
Change-Id: Icdd6ba2e706b2c791bcf44b6e718c2b7a5eb2218
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Contrary to expectations, various <foo>-config tools sometimes spit out
denormalized paths, which breaks the text-based filtering, as it relies
on exact matches with normalized paths.
Change-Id: I0613ed24953a3bde19939d28d09572c88b43a361
Task-number: QTBUG-39216
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
the windows version is already sane in this regard
Change-Id: Ib9c6fa35ede0e5e98b38b7b97086b9245c79d48f
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
[ChangeLog][configure] The -process/-fully-process/-dont-process options
have been removed due to being unnecessary and counterproductive.
-fully-process has always been broken to a degree under unix (and since
5.0 under windows) - rcc isn't built before running qmake -r, so the
dependencies are unreliable (and there are many warning messages from
qmake).
also, it is a lot slower nowadays, as qmake -r is not parallelized.
-dont-process doesn't make any sense any more - even if you don't need
the Makefile for some obscure reason, the time spent on creating it is
not relevant without the recursion.
this leaves -process as the only option.
Task-number: QTBUG-36955
Change-Id: Ifd3949d9ff773780646c6f65db1629e1c19e53d2
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
If -qreal float is passed, fullCpuArchitecture() will now include
"-qreal_float". If something else other than "float" is passed to
-qreal, we'll try to encode it (e.g., -qreal "fixed<int, 7>").
Change-Id: Ie33fd1a643f4376e6f01a7966e01c7c34e6fcffd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
GCC 4.9 now allows us to #include any and all intrinsics headers, not
just the one for which we're compiling code, a behavior that ICC and
MSVC have had for some time. With that, we're able to have the functions
for different targets in the same source file. See the GCC manual:
http://gcc.gnu.org/onlinedocs/gcc/Function-Multiversioning.html
This functionality is notified by the QT_COMPILER_SUPPORTS_HERE(XXX)
macro, which indicates that all the intrinsics from
QT_COMPILER_SUPPORTS_xxx are available and enabled. To complement, a
QT_COMPILER_SUPPORTS(XXX) macro is also added.
Unlike ICC and MSVC, GCC requires a special function attribute, which
will also cause code optimization. That's the QT_FUNCTION_TARGET macro.
Note: because of the absence of the target attribute, ICC and MSVC will
not generate instructions with the VEX prefix unless they only exist
with the VEX prefix or if -mavx / -arch:AVX are enabled.
Change-Id: I0c1880c20324bd8e0fc68a863e36d1fa7755dff0
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@digia.com>
This matches the -ffunction-sections from bootstrap.pro, which tells the
compiler to create a section for each function. The -gc-sections option
tells the linker to drop what wasn't used (normally, it only drops
entire files).
Before (on Linux, built with -O3, no LTO):
text data bss dec hex filename
1746385 7920 3750 1758055 1ad367 bin/moc
1444101 6664 1894 1452659 162a73 bin/rcc
4407725 1568 4896 4414189 435aed bin/qmake
After:
text data bss dec hex filename
1131655 6520 3494 1141669 116ba5 bin/moc
1027043 5480 1766 1034289 fc831 bin/rcc
3578489 1656 5313 3585458 36b5b2 bin/qmake
Gain: 35% on moc, 28% on rcc, 19% on qmake
Before (on OS X):
__TEXT __DATA __OBJC others dec hex
1495040 12288 0 4294993008 4296500336 100176470 bin/moc
1265664 8192 0 4294983904 4296257760 10013b0e0 bin/rcc
5279744 81920 0 4297912320 4303273984 1007ec000 bin/qmake
After:
__TEXT __DATA __OBJC others dec hex
806912 8192 0 4294988132 4295803236 1000cc164 bin/moc
720896 8192 0 4294979764 4295708852 1000b50b4 bin/rcc
4841472 77824 0 4295580688 4300499984 100546c10 bin/qmake
Gain: 46% on moc, 43% on rcc, 8% on qmake.
Change-Id: Icc7cdc9fd6f5db15537b4adabaac7e7a27e539d4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This might lead to a smaller binary if we use --gc-sections too.
Change-Id: I7e17b956a85ecefc3e187054848393d2855152b6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
* add -help text for gtkstyle
* use capital GTK in warning message for consistency
Change-Id: Iff522cc49497dda406dd111594857930d82e4231
Reviewed-by: Martin Jansa <Martin.Jansa@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
In ES builds configure will now check for OpenGL ES 3.0 and 3.1
availability. This allows qopengl.h to include the correct header
and, by defining QT_OPENGL_ES_3 and QT_OPENGL_ES_3_1, the OpenGL
wrappers can provide support for MapBuffer, VAOs, etc. on GLES 3.0+
too. Right now this is not possible since the only standard way to
use an ES function specific to a given version is to use the function
directly. The extension mechanism (eglGetProcAddress and friends), that
is often used in desktop GL, is not available for such functions.
[ChangeLog][QtGui] QtGui's OpenGL headers are now automatically including
the highest available header (gl31.h, gl3.h or gl2.h) in OpenGL ES builds.
Task-number: QTBUG-38168
Change-Id: Ib857c58fe1696a9546fdd1aa143a9237e80325a5
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Do not link against ICU on Windows, unless it is explicitly requested
('-icu' configure option). This removes the QtCore->ICU dependency
if ICU was detected in the configure environment.
So far ICU has been used in Qt Core for
- support of a larger set of codecs (805 instead of 135)
- more accurate QLocale functionality (QLocale::toUpper,
qLocale::toLower)
- string collation
However, for all functionality there are also backends using the
Windows API/Registry (QLocale, QCollator), or built-in
codecs that are part of QtCore. Since the ICU dependency is quite heavy
(3 libs with about 25 MB) it seems sensible to not require it by default.
QtWebkit is unaffected, since it has it's own ICU check.
[ChangeLog][Windows] Changed configure defaults so that Qt5Core does not
link against ICU libraries anymore. Pass '-icu' to enable it.
Task-number: QTBUG-38259
Change-Id: I3fd3e8ac0f091f532b04945718c0e4a3cc71a087
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
It has been fully obsoleted by 4255ba40ab.
This reverts commit 99eecab83d.
Change-Id: Id7b8d3bba27ff43e38e4fe32a4f2950de9ced493
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: John Layt <jlayt@kde.org>
Allows disabling pulseaudio and alsa support at configure time
making builds more deterministic.
Change-Id: I4f1719cf831458b1d5ad3ebc01f6782b897d392c
Reviewed-by: Martin Jansa <Martin.Jansa@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Kalle Viironen <kalle.viironen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This removes the old objcopy.test script and adds a cross platform
qmake project for auto detection.
Change-Id: Icc7c40d72fb0ff751d214b7351e20652f7b15945
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
For AAT shaping support, we need either the pre-QPA shaping trick
or the new HarfBuzz on Mac; prefer the latter.
Disable some test cases aimed to test the HB-old behavior; enable ones
that should guarantee shaping-unaware behavior.
[ChangeLog][OS X] Use CoreText text shaping engine for support of
complex scripts. If required, the shaping engine used in previous
versions can be preferred by configuring Qt with -no-harfbuzz.
Alternatively, the QT_HARFBUZZ environment variable could be set to "old".
Task-number: QTBUG-18980 (relates)
Task-number: QTBUG-38246
Change-Id: Iee6fe4f5bc047e77259182b8585385c5febd02b3
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
the effect of this is negligible, as this list is only used for
dependency scanning.
Change-Id: Iae9fc73c8633cfc8217bc90014498d9635d53ad0
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
QtPositioning is supported on iOS since Qt 5.3.
Task-number: QTBUG-37792
Change-Id: I74729f0c99c49858032b68dd0e7c9e628ae77b12
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
This is the latest version, released on Mar 27 2014. It includes:
https://bugs.freedesktop.org/show_bug.cgi?id=75798https://bugs.freedesktop.org/show_bug.cgi?id=75892
Required for fixing input when running Qt application on Mac OS X
with XQuartz and for fixing QTBUG-36281.
Change-Id: Idc4d3c99a4008a10b91ab51c8910b36909974703
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
This adds evdev to the help, configure status output and will include
it in the qconfig.h.
Change-Id: Ibc07516ab07e7c53ec89b167d604f5cefa2d92b7
Reviewed-by: Fabian Bumberger <fbumberger@rim.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This should've been removed in commit 24f1025663
Task-number: QTBUG-37832
Change-Id: I3404f17c904dbb462773f40371d09b0e58a0930d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Pass the -confirm-license option to external license checker which is
used in Qt commercial version.
Change-Id: I62326d1e6a8307dae64535ecf2ced762130b7e8f
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Samuli Piippo <samuli.piippo@digia.com>
Enterprise only license key handling removed from configure.
This does not affect the functionality of the Open Source version nor
the enterprise version.
Change-Id: I01736eba3066c56b6e50e022fae8de6aa9bd884b
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Users might have (old) libxcb installed on OS X, for instance as
a dependency for another package installed via MacPorts. It's still
very unlikely that any Mac user would want to use the XCB platform
plugin. Thus, disable the auto-detection to avoid a dubious XCB
configuration error on Mac.
Change-Id: I11d21aad255925883d6841444baa13a29f1a26b0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Gatis Paeglis <gatis.paeglis@digia.com>
don't make it add -g flags all of its own, but instead rely on debug
info being already present.
Change-Id: Ifb6b33709689e979768963ae0b9f3dca4fc77eef
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
clearly, this was a poor man's implementation of -force-debug-info.
Change-Id: Ib5c7e390bd0e3a6912af8c4027074a114ed33f8a
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
as the option needs to be explicitly requested, just error out when
objcopy is bad.
also, disabling it after performing the test successfully isn't a very
clever thing to do. hpux is dead anyway, so just remove that logic.
Change-Id: I923a3912fc29da646c492c27aa29091ffeb2e42d
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This release comes with important bug fixes. Also we can now
remove the workaround code which was needed for libxkbcommon 0.2.0.
Task-number: QTBUG-31712
Task-number: QTBUG-33732
Task-number: QTBUG-34056
Change-Id: I57caf7f803b9a01a15541a5ad82e464de3b8abbb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Disable eglfs and similar plugins when opengl is not enabled.
(but egl is present)
GL-dependent parts of eglconvenience need to be skipped too.
Task-number: QTBUG-37457
Change-Id: I44d49495241551bc7b1f565aa0b5ace9f310628e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
Remove definition QT_EDITION which was set in configure
since it is not used anywhere anymore.
Change-Id: I5c30ab47c6244fcb07707fd05e11decf2068f6d1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Grepping in Qt source code for QT_NO_XCB didn't find any
references to this variable.
Change-Id: Iabe5679f8b066facede2ac3bfc8c14ec4c0473a2
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
First of all QT_NO_SHAPE was never set in configure script, which
means that !contains(DEFINES, QT_NO_SHAPE):LIBS += -lxcb-shape always
was true and we were linking to -lxcb-shape no matter what.
Secondly, we are providing shape.c in qtbase/src/3rdparty/xcb/libxcb, so
users always have an -qt-xcb option available to get this extension.
Change-Id: I7d14a0ac5ca6e36fb9c053225916cae41028b532
Reviewed-by: Uli Schlachter <psychon@znc.in>
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
Relevant part from libxkbcommon's configure.ac file:
xkb_base=`$PKG_CONFIG --variable=xkb_base xkeyboard-config`
if test "x$xkb_base" = x; then
xkb_base=$datadir/X11/xkb
fi
AC_ARG_WITH([xkb_config_root],
[AS_HELP_STRING([--with-xkb-config-root=<path>],
[Set default XKB config root (default: xkeyboard-config install path)])],
[XKBCONFIGROOT="$withval"],
[XKBCONFIGROOT="$xkb_base"])
AC_SUBST([XKBCONFIGROOT])
This patch implements an equivalent logic in Qt's configure script (with some
additions).
Change-Id: I25968f76021e120e2439d2756121bbe3c5e18c98
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Qt 4 used to have it called LICENSE.GPL3 since we used to have GPLv2 as
an option before Qt 4.5 (which is when we added the LGPL v2.1). Looks
like no one realized that the configure script looks for that file when
LICENSE.GPL was added to the modularized repositories...
Task-number: QTBUG-37175
Change-Id: Iffb35adf128c3e49a7a0c12dbccd5ebe9bccf3f2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
less platform-specific code. the qfeatures.h generation is already here.
Change-Id: Ied69fb431eed5816fbff63b33be431ee913c2bc8
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
G does not come after I. That's actually my fault, in the original
commit. But some options have been added since then in the wrong place
and/or using wrong settings for the report_support function.
Change-Id: Ib3f7d58a41059e5e7f97fd0e223b9629664686ad
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Added configure test, whether lgmon (liquid graphics performance monitor)
is available. The test is supposed to be positive only for internal
BlackBerry NDKs currently.
Added calls to initialize lgmon and to indicate when an app is ready for
user input.
Change-Id: I5cbc29fb38a86585dcebd14d462436deaa1998aa
Reviewed-by: Wolfgang Bremer <wbremer@blackberry.com>
Reviewed-by: Fabian Bumberger <fbumberger@rim.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
On platforms like the Raspberry Pi the EGL implementation is not
compatible with X. This means that while EGL and Open GL ES can be enabled,
and will work fine with platform plugins like eglfs, EGL (and thus GL) should
be automatically disabled in xcb, otherwise a compilation error will occur
since xcb assumes the native handle types are the corresponding Xlib types.
Task-number: QTBUG-36551
Change-Id: I2cc4c558abb4b25d422a2c01da9b75b865ace402
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
Add the required printsupport plugins to the QTPLUGIN variable
as is done for the QPA plugin.
[ChangeLog][QtPrintSupport] Made the Qt buildsystem automatically include the
necessary plugins so that static applications can print.
Task-number: QTBUG-29663
Change-Id: I0e2e3b0f25dd5714bd187711c85893926b0c4e85
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since we dropped all platform-related shapers during the
QPA refactoring, thus making HarfBuzz the only shaper on all
platforms, we can not deal with AAT-capable fonts anymore.
HarBuzz-NG now supports it's own shaper backend infrastructure,
so the decision was to enable HB's CoreText shaper backend on Mac
and simply make HB-NG the default shaper there.
Task-number: QTBUG-36056
Change-Id: If22e24fd5cc00c25952934332a2f4123f38135a4
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
It's not shipped as part of the default installation, but the binary
in /usr/X11R6/bin/makedepend exists and will trigger a dialog that
asks you to install X11. This is not needed when we can use the
compiler to resolve the dependencies for us.
Change-Id: I67e35a63d0f7101b7673127228df4dcefd3c1fdc
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Allows us to sanity check the iOS build in the CI.
Change-Id: I16f9bfafef3988dcab6efd3155503ca0d0b4d1d8
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Instead of merely intercepting logging output from stdout/stderr from the
journal side of started processes, this has the advantage of meaning that the
origin process name will be correct.
fprintf won't work, because if a process starts children (like e.g. a
homescreen does), then their stdout/stderr are merged into their parent, and
journal has no way of differentiating the origin.
We are also able to store information about the context of logging, which might
be useful in post-mortem cases.
[ChangeLog][Platform Specific Changes][Linux] Systems with systemd may now pass
-journald to configure to send logging output to journald. Logging will still be
sent to stderr for interactive applications (run from a tty) or with
QT_NO_JOURNALD_LOG set to a non-empty value.
Change-Id: Ib260cec1ea87390bf44f267d217d795583407d00
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Needed to run the XKB extension where we used to expect X11 to be
installed in /usr. In FreeBSD, for instance, X11 is installed in
/usr/local like all the other not out-of-the-box packages.
Same thing goes for the compose platform input context plugin.
Change-Id: Ib7ace3117eaacc6e150394450d1330cba654ba8a
Reviewed-by: Gatis Paeglis <gatis.paeglis@digia.com>
The normalize function don't do well it's job.
Given a path like that, the regexp "/[^/]+/.." will match 3 times
/usr/lib/gcc/x86_64-unknown-linux-gnu/4.8.2/../../../../include/c++/4.8.2
[ ][ ][ ]
The second match is wrong as it will remove /../..
Use sub instead of gsub which only remove one match at the time.
Change-Id: I0657bc603e521c9e53b9f50d2481dce184b64bad
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Fixes ARM build, as the NEON drawhelpers and image conversion functions
were ifdef'ed out.
Follow-up to 1b12c0608b.
Change-Id: I0b5e89c8f445741432db2dfe1f8d971b971c8605
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Now the only way to enable Neon support is to change the mkspec.
[ChangeLog][Important Behavior Changes] Qt no longer checks for
support for the Neon FPU on ARM platforms at runtime. Code optimized
for Neon must be enabled unconditionally at compile time by ensuring
the compiler supports Neon. You may need to edit your mkspec for that.
Task-number: QTBUG-30440
Change-Id: I4df9b2bf3cd022f8ed70f02f16878cb2cb3fe6fb
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
... except where they actually contain variable expansions.
unescaped backslashes in double quoted strings aren't nice, and
apparently actually break with old solaris shells.
Task-number: QTBUG-14167
Change-Id: I703694b6ac7ab71d9293c049d77212e20dd5bcb0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Passing -no-xcb disables xcb and related configuration tests
completely so for example QT_NO_XRENDER is not defined. This results
in linker errors in glxconvenience with -no-xcb since the XRender
calls are compiled in without linking to the library.
The XRender, XInput and such tests are not strictly xcb related and
may be used from elsewhere, for example glxconvenience which has
nothing to do with xcb. Therefore these tests are moved in configure
so that they are run even when xcb is disabled.
Task-number: QTBUG-35644
Change-Id: I77871612ea5f6711ecafd8ca53aac6c516c19e2e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
We already require iOS 5.0 for deployment.
Change-Id: Idc175892297aacc904888b7f213318e5df69f975
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Needed for using alternate stdlib implementation like libc++ with clang.
Change-Id: I1782f62f5e2ea95e6cff8a1ed646362c0a31645c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This is a left-over from the cleanup of MMX/3dNow!/SSE support, which we
no longer have in Qt.
Change-Id: I48388710a499bddb518ae3c2b8a4ad989482f58c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
If SSE2 isn't supported, then SSE3 can't be either. Onwards and upwards
for SSSE3, SSE4.1, SSE4.2 and AVX. The test for AVX2 was already there.
Task-number: QTBUG-24773
Change-Id: I005258db52d8abcd407a99b8ebcc23cdea8e3d9f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This got messed up in merge 4a8273a6fc
thanks to automatic conflict resolution.
Change-Id: Idbe1545c7d3ee0580bf2c1381dd3e8b2191dc3e8
Reviewed-by: Michael Brasser <michael.brasser@live.com>
d34cae51 introduced a new configuration parameter, xcb-xlib, but did not
remember to set the internal variable after the config test was run,
resulting in a potentially incorrect reporting of the option.
Change-Id: I979589d9aad2eb5e0fac069dfcd5b329a51ae059
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
the change is wrong for multiple reasons:
- it is possible to build qt (the offscreen plugin) with xlib but
without xcb, which was impossible after the change
- the check was built in a way that if xcb is auto-detected but xlib is
missing, configure would abort (instead of disabling xcb), which is
unreasonable (cf. linked task)
- it should be possible to build the xcb plugin without xlib - it's
testing for xcb-xlib and should have the correct #ifdefs. if these are
broken, they should be fixed. if this is unrealistic, the build system
should be adjusted to this fact ... differently.
This reverts commit 683451e7c7.
Task-number: QTBUG-34382
Change-Id: I1c5811e2fb1f09b084b6aeb7350e5f376e1b9b82
Reviewed-by: Nicolás Alvarez <nicolas.alvarez@gmail.com>
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
Testing feature macros is not enough for uclibc. Fixes build of the built-in
sqlite3 with uclibc <= 0.9.33.2. Later versions will have posix_fallocate().
Change-Id: I918a52777ac63624635802221effc6b86fa2269c
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
We require glx version 1.3 which is where fbconfig is first defined.
Also make use of the configure test and report the glx status.
GLX support should always take precedence when compiling the
xcb backend
Change-Id: Ie46834210bf5cd2ac4006ff08379e0d3434ffa2b
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
This adds a new configuration parameter, xcb-xlib, which allows
overriding the configure test for that existing configuration option.
The use of xcb-xlib in the xcb platform plugin becomes the preferred path
for non-OpenGL ES 2 builds, while the EGL codepath is used otherwise.
This has the advantage that EGL can be used with Desktop OpenGL if Qt is
configured with -no-xcb-xlib.
Change-Id: I5018e31fe0399b94f020c671eff9414d00431c44
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
desktop opengl and egl are not incompatible with eachother, so there
is no need to disable egl when on desktop opengl
Task-number: QTBUG-34949
Change-Id: I757c38674a480910d1cb23853c255eb993e107ff
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
For the conflicts in msvc_nmake.cpp the ifdefs are extended since we
need to support windows phone in the target branch while it is not there
in the current stable branch (as of Qt 5.2).
Conflicts:
configure
qmake/generators/win32/msvc_nmake.cpp
src/3rdparty/angle/src/libEGL/Surface.cpp
src/angle/src/common/common.pri
src/corelib/global/qglobal.h
src/corelib/io/qstandardpaths.cpp
src/plugins/platforms/qnx/qqnxintegration.cpp
src/plugins/platforms/qnx/qqnxscreeneventhandler.h
src/plugins/platforms/xcb/qglxintegration.h
src/widgets/kernel/win.pri
tests/auto/corelib/thread/qreadwritelock/tst_qreadwritelock.cpp
tests/auto/corelib/tools/qdatetime/tst_qdatetime.cpp
tests/auto/gui/text/qtextdocument/tst_qtextdocument.cpp
tools/configure/configureapp.cpp
Change-Id: I00b579eefebaf61d26ab9b00046d2b5bd5958812
The QtGraphicalEffects module is a QtQuick2 only module so it is clear
why it was left out before iOS had support for QtQuick2, but now it
should be built by default. This commit removes QtGraphicalEffects from
the iOS module "skip list".
Change-Id: Ie0890f6784ad6e276e80bf7a11195c141ca23332
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
The QtQuickControls is supported for 5.2 though it does not provide
the system native "look and feel". This patch removes the module from
the iOS module "skip list".
Task-number: QTBUG-35033
Change-Id: Icad479f2e4651c02e569e8a86cfe5ac912d8ed10
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
QtMultimedia is supported in Qt 5.2 and should be built by default, so
it has been removed from the module "skip list"
Task-number: QTBUG-35039
Change-Id: Id43f997251bf392b7f6c0166ee06b7364ce30b8e
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
it's beyond me how it landed in the middle of the sql driver detection.
Change-Id: I7d1302e3440b8828a291e3009e9b130a2fdf165f
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Plain QNX 6.5.0 does not have a libpps, the new QNX
has a libpps and BlackBerry has it as well. So we need
a configure check to not open another mkspec for this
platform. This fixes the plain QNX 6.5.0 build.
Change-Id: Id4b3876f2385bcb5f3df426945532e7e26133f24
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
introduce XPLATFORM_MAC which is properly initialized from the spec
instead of from the host.
use that and BUILD_ON_MAC where appropriate.
minor bug: during command line arg validation we use BUILD_ON_MAC even
when XPLATFORM_MAC would be in order, because the latter is not
available at that point yet. the solution would be delaying the
validation, but that doesn't seem worth the effort now.
Task-number: QTBUG-33896
Change-Id: I63f361212961bfdd82efde2ca71a1f48904a85fb
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... which is right after performing the platform detection, as proper
license checking needs to know the target platform.
we can do that now, as we moved all more expensive or side effect laden
processing to a later point.
as a side effect, we also get rid of the weird early cmdline parsing.
Change-Id: I0fda0a15a1ea2082603f7097e89aa422853f30fa
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
is the only sane thing, and now that there are no dependencies on
anything else any more (in particular anything slow or side effect
laden), we can actually do it.
this removes some nasty OPT_HELP checks spread throughout the code, thus
further reducing data dependencies.
Change-Id: Ib0a00e1514e2aa25ec3b527ba9f5719e3214640b
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the help would echo the defaults adjusted by command line overrides and
environment variables for some options. this was entirely pointless.
it also printed the result of the os detection, which was mostly
useless.
but the primary reason for doing this is reducing data dependencies,
so the code can be moved up.
not touching the windows configure, as it's a lot harder and currently
that behavior isn't in the way of what i need to do.
Change-Id: Ide62119091c8494fb3bea2b607f140268f057919
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
it's counterproductive to do it earlier: it's passed down to configure
tests, which then log less info than they could.
but primarily, this serves the purpose of minimizing the amount of code
executed before platform detection.
Change-Id: Iff19b8555de19d048ea6d9341af965871b314c54
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
minimizing the amount of code executed before platform detection.
Change-Id: Ib2c0d97ce5040ced8c4c41d74f428fe7d0f75664
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
it's entirely pointless to flood the user with information and force him
to scroll back when he most likely just made a typo.
apart from that, this reduces the data dependencies, thus easing further
refactoring.
Change-Id: I7b24274d453de54a4f02481a66d77e27d4ab0657
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
moving dead code out of the way of further refactoring.
Change-Id: If558406cdf13d61478634dd7eff644dc67b0e53d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
have this option independent code out of the way before starting option
processing.
Change-Id: I5a08caeb25689b155c256ef82505c000112f5039
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This way, a Qt compiled with qreal=float and one linked
with qreal=double can not be linked by a single downstream. That is
diagnosed at cmake-time.
Change-Id: I9183dbcfef181fadea5321d3154948e8258e4a2a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
On modern ARM CPUs there is no speed difference between
float and double anymore, so let's rather use double for
qreal to avoid rounding and precision issues. Like this
we also get much better compatibility with our desktop
OSes.
This is not binary compatible on ARM, but the old behavior
can be restored by passing -qreal float to configure.
Change-Id: I2a4b61e19a3dfa6b0bd76734cecf2634c97207fc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
this makes it possible to properly exclude entire subprojects based on the
availability of features, rather than stuffing every single source file
with #ifdefs.
the defines are aggregated from the -qconfig <profile>,
-no-feature-<foo> and some other configure flags.
usage:
load(qfeatures)
!contains(QT_DISABLED_FEATURES, textarea): SUBDIRS += textstuff
Task-number: QTBUG-28102
Change-Id: I83400632d64312fa4b907e1318dddfe27c432387
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Reviewed-by: Tasuku Suzuki <stasuku@gmail.com>
the path filtering functions assume that DEFAULT_{INC,LIB}DIRS are
newline separated lists of unquoted strings, which 8fbf959be broke.
Task-number: QTBUG-33714
Change-Id: Ie07909963ac5155a8ac79ca9254f34069925e001
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Conceptually a Qt for iOS SDK or source build should support building
for both simulator and device, based on the same qmake binary and Qt
libraries. Qt Creator or Xcode should then be able to use the same Qt
version while still building for a single target at a time. This
applies to user libraries as well, which shouldn't require switching
to a different Qt when changing target platform from simulator to
device.
We achieve this by using Qt's exclusive_build feature, where we build
for the two targets in parallel, and then teach Xcode how to choose
the right library dynamically at build time.
Change-Id: I06d60e120d986085fb8686ced98f22f7047c4f23
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
We used to compute the default exclusive build directory, eg 'debug', at
configure time, and then set OBJECTS_DIR, MOC_DIR, etc to include this
hard-coded default exclusive build directory. We then had to run a post-
process step where we replaced the 'debug' part with the current actual
exclusive build pass, eg 'release', resulting in long-standing bugs such
as QTBUG-491 where we end up replacing parts of the build output dirs
that were not part of the original exclusive build directory.
We now set the OBJECTS_DIR, MOC_DIR, etc defaults in configure like
before, but they do not include any exclusive-build information. The
exclusive build directory is handled as a separate step in default_post
where we adjust all entries in QMAKE_DIR_REPLACE to be exclusive
directories.
For backwards compatibility the new exclusive build behavior is only
enabled for variables named by QMAKE_DIR_REPLACE_SANE, which for Qt
itself applies globally to everything but DESTDIR, and for libs and
tools also applies to DESTDIR. The reason for leaving out DESTDIR in
the general case is because many tests and examples assume the old
behavior for DESTDIR. A side effect of including all the other
variables for Qt libs and tools is that the PCH output dir will be
uniformly set, which has been an issue on Windows in the past.
The addExclusiveBuilds function now takes two or more arguments,
each argument being the key for an exclusive build, which can be
customized eg. using $$key.{name,target,dir_affix}. Passing more
than two arguments results in three/four/etc-way exclusive builds,
eg debug/release/profile. Exclusive builds can also be combined, eg
static/shared + debug/release by making two calls to the function.
We also handle individual targets of combined exclusive builds,
eg static/shared + debug/release, meaning it is possible to run
'make debug' to build both static-debug and shared-debug.
Task-number: QTBUG-491
Change-Id: I02841dbbd065ac07d413dfb45cfcfe4c013674ac
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Avoid need to modify qnx.pro in src/plugins/platforms/qnx to
build with imf support. By default detects if necessary headers
and libraries are available. Can also be explicitly requested or
disabled with -imf and -no-imf options.
Change-Id: I3f9780fc189a33e4c93fb4f950111121f8e947c3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Status for LIBUDEV printed again in the configure output under 'udev ....'
Change-Id: I3e0beca4c6de315dc2dfbdc24d83f4d9cd2b8856
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Nothing in qtbase uses gstreamer, so this is just a red herring.
Change-Id: I93fb20a70928d84fed8f33ca4c5df38779928f1a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
apparently some awks need the regexp delimiters to be escaped even
within a character list.
Change-Id: I74a77022e134cafa269960c5c88a9a88589f1b95
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
but this time without reshuffling it. it's actually easy with awk.
this makes the resulting qconfig.pri cleaner (and thus easier to debug).
and configure needs a few millisecs less to finish. ^^
QMAKE_DEFAULT_INCDIRS doesn't appear to contain dupes to start with.
Change-Id: I9eed2cf853cd15d0d24a885b1c3d69f22ffafb36
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
the consumers of these variables use the strings for naive text-based
"subtraction", which of course doesn't work particularly well when the
paths contain "../", "./", and trailing slashes.
Task-number: QTBUG-33714
Change-Id: I893c90e6f5c7cf18c9e6cb1e5be825a16509a2a4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Don't discard stdout, it might contain important information. For
example, if qmake crashes, the segfault or similar notification comes
to stdout.
Change-Id: I53def75f37f134544922cf01b4f2ba7c903351cb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The regular expression does not parse correctly when a device option value
contains the character '=' (e.g. QMAKE_CFLAGS="-D_FILE_OFFSET_BITS=64").
In order to break string at the first equal sign and to simplify code,
use "cut" command as in other places in configure script.
Task-number: QTBUG-33584
Change-Id: I05b474d2ba6bff84c1e40d00475963bab36d94b6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This module doesn't make much sense for iOS.
Change-Id: Iadcf3006e1e2bdd97c460e836e91717856cb118c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Iikka Eklund <iikka.eklund@digia.com>
These modules don't build for iOS or don't have a backend yet
Also organizing the list a bit while we are it.
Change-Id: Ic72e897325c9478f66af8e8f879fe6342eb327dc
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Added QXcbSessionManager to the Xcb plugin.
QXcbSessionManager inherits from QPlatformSessionManager, it's a port of
QSessionManager as it is in Qt 4.8.
Minor changes also in QPlatformSessionManager and QGuiApplication to
hook it up.
Task-number: QTBUG-28228
Task-number: QTBUG-30011
Task-number: QTBUG-33033
Change-Id: I50b33d05a1e32c5278dea339f693713acc870a70
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: David Faure <david.faure@kdab.com>
The 4.7 version of the toolchain in the NDK has been
obsoleted by the introduction of version 4.8. The default
can still be overridden if necessary.
Change-Id: I042ded92e50dc5ebc4d54ffccc2e6856fc3edba0
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The XCB port is still incomplete and needs Xlib in several places.
The configure script should reflect that and make sure Xlib is present.
Change-Id: I6d81ea6cacef56084cf7ccfbcf908d597aae918f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The XCB platform plugin is the only one that requires Xrender.
Change-Id: Iac2efa31b4b51e38305ee5f635fe38b75c7752de
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
this adds the possibility to put the actual qt installation outside the
sysroot it is configured for. this makes it possible to install an
x-built qt without "polluting" the sysroot, which makes it possible to
have read-only sysroots, and multiple qt builds for one sysroot.
-prefix is the location within the sysroot as seen by the target itself,
and gets "burned" into QLibraryInfo in QtCore.
-extprefix is the location in the host file system and gets "burned"
into QLibraryInfo in qmake. if it is not specified, it defaults to the
sysrootified prefix, which is the previous behavior.
Task-number: QTBUG-26680
Change-Id: Ia43833c4e27733159afeb8c8b9b2d981378d0cd1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
well, not really - qt_parts.prf will still create one, but it will be
empty.
apart from being cleaner, this now finally makes it possible to load an
unconfigured qt source tree into qtcreator without random parts of the
tree being missing from the project explorer.
Change-Id: Ida7ee77ecb450af05bfa66106caf2067b02f1a7f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
To instrument a Qt application or library with the gcov coverage
tool, do `CONFIG+=gcov' in the application .pro file.
To instrument Qt itself with gcov, use the `-gcov' configure
option.
Change-Id: If24e91d95318609b0df1a76ed6d679bd92bcaab2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
the -l* fallback is for adding libraries. it obviously makes no sense in
its negated form.
Task-number: QTBUG-32550
Change-Id: I9f3af9a2fc059ba39987d4b197ed4778cc7f35b6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
On systems where xkbcommon >= 0.2.0 the output should be
xkbcommon .............. yes (system library)
instead of
xkbcommon .............. yes
Change-Id: I5807946e61814d414a68a15ad96c91f25c9482ee
Reviewed-by: Gatis Paeglis <gatis.paeglis@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Instead the module decides now itself whether it supports iOS or not, because
soon it will enable itself :)
Change-Id: I4802441f0a01ed62966a7a0e66f5a8ccfe843cb8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
the built host tool may need to know what the target architecture is,
e.g. mkv8snapshot does.
Change-Id: Ie5b1f6a07fa082d212e7c5b54289de49fd74dbcf
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
because of popular confusion.
the packaging scripts now need to use -no-compile-examples explicitly.
Task-number: QTBUG-32449
Change-Id: Iecab1f345afe21e540204fe69a2292ef932cbb61
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
QtPlatformSupport fails to build if EGL support is enabled but OpenGL
isn't. It tries to compile eglconvenience, but qplatformopenglcontext.h
is empty (#ifndef QT_NO_OPENGL).
It makes no sense to have EGL with no OpenGL ES, so make sure we don't
try it.
The current test to disable EGL if OpenGL desktop is active is upside
down. With -opengl desktop -no-egl, it would complain that EGL support
was requested.
Task-number: QTBUG-28763
Change-Id: I80c780ec78181f3fa85f43e41be21d1217d76610
Reviewed-by: Lisandro Damián Nicanor Pérez Meyer <perezmeyer@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The $AWK variable already contains the best awk version
available. Possible values for this variable are: gawk, nawk or
awk.
Using just awk fails on Solaris with:
user@localhost:~/qtbase$ ./configure -platform solaris-g++
awk: syntax error near line 4
awk: bailing out near line 4
This is the Qt Open Source Edition.
Change-Id: I02a17915e8b27a5ce7e831a1225872cf460b3a6b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The 'local' keyword doesn't exist in Solaris' bourne shell as a
reserved word.
Change-Id: I3270c74f79842ee10481a40a9f82d9fb74aff2e5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
shifts the makefile generation one directory level up.
this allows the top-level configure to leave the makefile creation
entirely to the qtbase configure.
this is not very clean modularization-wise, but consistent with -skip.
Change-Id: I7ee2d2f29f2e6619d61fe9b55faa0bacdf3c44c1
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the option the user most likely meant is called -nomake.
Task-number: QTBUG-21778
Change-Id: I6d8c4d5a984c929804f49ffc2ac75f6945f76e81
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
not quoting the variable references allows the shell to word-split the
contents and thus convert the embedded linebreaks into spaces.
Change-Id: Id834f02d7a501fb6fe48b45f409f599a8b70b7ed
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Ray Donnelly <mingw.android@gmail.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the installation has been moved to the qtbase top-level project a long
time ago.
Change-Id: I25f1658d1a6544da4bdaa5be6b19f9076c19b7f9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
instead, use the files directly from the source dir.
Change-Id: I03b728c66de6e03cade6dc153dcc78cea8e3f606
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
instead, teach qmake to use the mkspecs dir from the source dir as well.
Change-Id: I9edac11f8997fcb0594d0a67419d4733dd4ed86b
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Make it be one big AWK script instead of a ton of smaller
processes. Also handle the defaults inside the AWK script for
simplicity.
Since the output is a qmake variable, we do not need to surround with
quotes strings that don't contain spaces.
Also, use a tee trick to print the verbose output: we get the actual
output from awk.
Change-Id: I4a48a917c988a6b03d2c3b6990765301287713ef
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
the logic in the configures was even trying to express that, only that
nowadays we always ship syncqt, so the tests were kinda pointless.
this frees us from the perl dependency for non-developer builds of
packaged modules (except for webkit, which needs almost every scripting
language on earth anyway).
obviously, this requires that the packaging scripts run syncqt in the
source dir before tarring up the sources. note that for repositories
other than qtbase, the -version argument needs to be passed to syncqt.
Task-number: QTBUG-29465
Change-Id: Ic929ab17a5de4b30fbf48b3aa9bfa3b4d2ef37d6
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
this avoids that syncqt needs to forward to a yet unexisting file (which
will have a yet unknown location, when syncqt is run at packaging time
already).
the %inject_headers syncqt config variable remains, so it can be told
not to purge "foreign" files.
Change-Id: I127ff6e0b7d5702fb0acaee9a5b7940b482d3608
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the code makes no sense, and was added with the QNX port without comment.
there is already a detection a few lines up.
Change-Id: I18ec18604c37c7c42f2649a658dd22324d481dd3
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Reviewed-by: Harald Fernengel <harald.fernengel@nokia.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
this overrides the magic that makes examples only install their sources
in production builds.
packagers may want to force the build of the examples, so they can
package them up for demo purposes.
this is actually why we formerly had the split between demos and
examples ...
Task-number: QTBUG-30788
Change-Id: I5633f69404c5aa6846f5496e8f161a273a7a7da3
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Lisandro Damián Nicanor Pérez Meyer <perezmeyer@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This is the easy fix: looking at what is supported by the NDK. If people
have weird setups, then they have to specify -android-ndk-host. We do
actually detect the host architecture later, but using that would be
a much bigger (and riskier) change.
Task-number: QTBUG-31275
Change-Id: I18db878031baa2e1ee2fa4beff364d58d8bd3c7a
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
It's not needed, and when $outpath/lib doesn't already exist
(when shadow-building for example), $outpath/lib ends up being
a copy of libgnustl_shared.so, when it really must be a folder.
Change-Id: Iaf3af6f4183090137043549cb8d9899c2bc92f24
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
xcrun occasionally prompts for a license or outputs errors which
results in:
configure: line 2488: [: : integer expression expected
Check the output and bail out on error.
Change-Id: Ic1ae62b5f19cf87365c38901e98d6b385cdb39a4
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
instead, rename it to syncqt.pl and rely on qtPrepareTool()'s new
ability to correctly invoke it as a perl script even under windows.
the wrappers themselves have been trivial at this point, so there is no
added value in keeping them, either.
Change-Id: I77cf65edbcfaa48ed1900defe940d4eb4b82d5b9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
... and introduce -hostlibdir configure option for symmetry.
the libraries built for the host have no business in the target prefix.
in principle this code would even support dynamically linked host
libraries, but that's currently unused.
Task-number: QTBUG-30591
Change-Id: I8e600fa4911a020fb0e87fbf7ef2f35647c7c4d5
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Ivan Romanov <drizt@land.ru>
MSYS bash (and other msys-compiled executables) perform path
transformation much like Cygwin. This causes syncqt path
substitution to not work correctly, so use 'pwd -W' to get
the Windows version (though with forward slashes) of both
relpath and outpath.
Change-Id: I808e3ef9206ed5f5bd8b6879d12afe664e589e0c
Reviewed-by: Alvaro Burnett <alvaroburnett@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
... instead of scoping the defines in qconfig.h, which relied on the
Q_PROCESSOR_xxx defines and meant that we had to include qconfig.h
after qprocessordetection.h, which added a whole bunch of other
dependency issues.
We now let configure write QT_COMPILER_SUPPORTS_xxx to qconfig.h as
before, without any scoping, and then undefine the ones that don't
apply for the given processor. This means we need to include
qprocessordetection.h before qcompilerdetection.h in qglobal.h,
but the former does not depend on the latter, so this should be
fine.
Change-Id: If00c00d405463e9626fa0f7f5e6b17f68778904f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
It makes more sense to keep this workaround header together with the other
libxkbcommon files for a better access point since it's used by several *.pro
files.
Change-Id: I63d4eb58f6e7f3852834e41c4b6e058a2c962233
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
1) -qt-xcb
a) Use xkb from the 3rd party libs. As it is done for the other xcb
dependencies when qt configure with -qt-xcb.
2) -system-xcb (default)
a) If xkb found then use xkb from the system. (Currenly xkb is not
enabled by default when configuring libxcb library).
b) If xkb can't be found on the system then keyboard state will be
updated from X11 core events.
Change-Id: I7c3dbce6daa2cec52067cd5af80f19040233a0db
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
This library is required by the XCB platform plugin. As we depend on
very recent version of this library and it might not be available
in base repositories of distributions, users can use -qt-xkbcommom
switch to build Qt with the bundled version.
Change-Id: I0ed2a5cc2f1df98b0e7cc926cabfa69818674e08
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
The configure script does not actually produce a "confclean" make target.
Task-number: QTBUG-27735
Change-Id: Ia0f9e33e50c35cc6bb2941853e518a40fc9edaee
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The warning is more likely to be seen if it's closer to the end of the
output.
Also report whether we found xkbcommon in the main output. Note that
xkbcommon is used by Wayland too, so it's not dependent on QPA or on
the XCB backend.
Change-Id: I143327eea4e17fa06bc7c24c677ae0bd00e65711
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Keep options sorted and use indentation to group together related
options (QPA backends, image formats and SQL drivers).
Change-Id: I97d330a13a4daa4567ff741dc26e11f458ae7f53
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Neither /dev/null nor NUL work with Qt on Windows. For now, use
an empty file for the cases where qmake is used with /dev/null.
I filed a bug for this:
https://bugreports.qt-project.org/browse/QTBUG-30562
Change-Id: If5351214ae5a0ebe50ae46b155c327ca0dc59f98
Reviewed-by: Alvaro Burnett <alvaroburnett@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
A gap after option name is needed to select it with double-click.
Also I added padding periods for -testcocoon because it has no them before.
Task-number: QTBUG-30589
Change-Id: Ib5b970f9b17cad43609fbc53dd05a995aaf29b45
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
For now there's only one architecture per host/target, but
this will change once we start detecting the CPU features
for both device and simulator on iOS.
For convenience we set QT_CPU_FEATURES to the resolved
value of the current architecture, so that simd.prf still
can use QT_CPU_FEATURES directly.
Change-Id: I28e8b339a5c30a630e276165254dba09a3da6940
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
So that the user doesn't have to pass -no-pkg-config and -nomake, when
we already know that those flags are needed and that the build will break
without them.
Change-Id: Ic07e02bc1800f177cf09f704104c1a76bfc50aa2
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
QT_CPU_FEATURES is internal and only used by simd.prf, which is
also internal. This matches the available CPU features which are
detected using config tests and written to CONFIG in qmodule.pri.
Change-Id: I8eb35448e2954a54c228d3617f29afc0283a7db5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
We don't need it. Let linux-g++ be the default on all Linux builds,
period.
Task-number: QTBUG-30590
Change-Id: I26c73bf4f054684763b64ef5651b3488363ea7a1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The default lib and include dirs are resolved using the target
compiler and with a sysroot, so they are not relevant for host
builds.
Change-Id: Iceb2eb865d0732b9a6f5896ad126200ae8e8a04e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
We now have host_build to distinguish the two, and we load
qconfig.pri from both the host and the target mkspec, with
host_build set correctly.
Change-Id: I8b8b80d5487d10bb1d4585d27d10300f609a7775
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
We depend on Xcode for building Qt itself and user application on Mac OS.
The user may have an Xcode install that is not set up properly, in which
case we would fail compilation in mysterious ways. Instead we try to
detect misconfigured or missing Xcode installs as early as possible.
We try to detect if an Xcode install has not been chosen yet, and
if the user has not accepted the Xcode license agreement. We need to
do these checks both in configure, as early as possible, and in mkspecs
on Mac OS, as we need to error out if the user tries to build an app
with the Qt SDK, but with a broken Xcode install.
Change-Id: I4e3a11077a61dc5d4ee2c686d01044a9bb2c1c79
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
We always use the xcodebuild/xcrun/xcode-select binaries in /usr/bin,
as these will dispatch to the right binary based on what Xcode version
has been chosen using xcode-select -switch. This fixes an issue where
a tool was in the path from another Xcode installation. We can rely on
the tools as they are present on a clean Mac OS install.
Change-Id: I1d3cc1e92604f9be6d6f14639cb6322234edd696
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This means we have to bump the deployment target to Lion (10.7), as the
LLVM 'libc++' C++ standard library does not support Snow Leopard (10.6).
For iOS the deployment target has to be bumped from 4.3 to 5.0, but we
don't enable C++11 by default yet as it's not tested enough on iOS.
Users who wish to deploy to 10.6 need to build their own Qt,
passing -no-c++11 to configure.
Change-Id: I7b5d20ab002db889d1091a4b7ff600f62caa7f06
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
We used to disable NEON completely, as the iOS toolchain does not
handle the GAS syntax of the pixman draw-helpers. But we can limit
the disabling to just the draw-helpers, which means we get NEON
optimization of eg. QImage and QString.
Change-Id: If350b06ce521cca8b24468be5a168ff21e9e7124
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
We're trying to parse GCC output, so let's make sure that they are in
English. I've seen some reports that "search starts here" was
translated to some locales.
Change-Id: If09b1f45607f65d054496db65418e413b8aa8d48
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
the de-duplication has the side effect of sorting, which is a very bad
idea: x-compilers tend to append the host library paths at the end, and
we really want them to stay at the end.
and the lists should have no duplicates to start with. should we find a
compiler which breaks this assumption, we can use qmake's $$unique()
strategically.
Change-Id: I01560e3c33736c2dfffdb05d5c960c492439c946
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
evdev support in eglfs is now guarded by QT_NO_EVDEV, so this
check is no longer required. This allows eglfs + tslib to be
a supported combination.
This reverts commit a95e396a83.
Change-Id: Icf7c15121b7eca1131d412b05b956cd5d7f189ae
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
the dlls being in lib/ is kind of an accident (a side effect of how
qmake builds them). in fact, the libdir should be entirely irrelevant
for windows deployments (and indeed, the SDK is delivered with dlls only
in bin/).
Change-Id: If47e72b24774721a61ba63847f6132f88ff110be
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Jocelyn Turcotte <jocelyn.turcotte@digia.com>
Otherwise, we end up with an empty QT_LFLAGS_SQLITE and the plugin
won't link.
Change-Id: I026f60bf9cd075218dbe2888fbb7fc82782b27ca
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
I don't need that warning on my Mac.
Change-Id: I18c06135ba88a037103fdda0982976f4a87c553e
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Reviewed-by: Gatis Paeglis <gatis.paeglis@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Since c45595d648, we use the toolchain
based on the XCode SDK, not the one in $PATH. Turns out that the Clang
that comes bundled with XCode 4.6 reports its version as
Apple LLVM version 4.2 (clang-425.0.27) (based on LLVM 3.2svn)
Instead of "Apple clang". So we need to match for (clang|LLVM).
Extended regular expressions (with -E) were necessary because the sed
that comes with Mac OS X is apparently broken and will not work with
\(clang\|LLVM\). GNU sed accepts -E as an alias for -r, meaning
extended regexps.
Change-Id: I5a15de30721216b086c3d39a080cc6496c503985
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
There is no logic in configure to detect compiler capabilities
in the host- and cross-compilers separately, so if the
cross-compiler has more capabilities than the host compiler, the
compilation will break. This was the case for c++11 on Mac, which
is supported by the Android cross-compiler but not by default on
the host. There is a fix planned to enable c++11 on Mac, so
this is a temporary patch to work around the problem by disabling
c++11 explicitly until it has been fixed.
Change-Id: I2048dc7f63991c97b11b3980ac91292d2c9b7ce4
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
this is cleaner than having it parse qmake project files.
the only remaining built-in version extraction is the fallback to
qglobal.h needed for bootstrapping.
as a "side effect", this fixes the build of modules with mismatched
versions centralized in .qmake.conf, as this was simply not handled so
far.
the -mkspecsdir syncqt option goes away, as there is no use case for it
any more.
Task-number: QTBUG-29838
Change-Id: I6912a38f0e93a26bc267a9e3d738506fd3ad431b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jocelyn Turcotte <jocelyn.turcotte@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
It is needed for implementing the shortcut functionality in the xcb platform
plugin and for the compose key input context plugin.
As announced on the wayland-devel mailing list - the libxkbcommon 0.2.0 is
the first grown-up release of the library (Tue Oct 23, 2012). [1]
[1] http://lists.freedesktop.org/archives/wayland-devel/2012-October/005976.html
Change-Id: Id5d45e1a5afe49cf9ec5312318bd173f5a067f62
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
it's weird that the output from the two variants is differing, and that
after building qmake it appears to hang.
Change-Id: I2ac3ace11e958effe787b13e1300eb1d2839ae98
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
7de9d3709 broke them, because suddenly every -l* switch was parsed as a
library. fix this by re-arranging how the options are parsed.
this obsoletes d7ab351cdd as well, by being more generic.
fwiw, this syntax is stupid to start with, because all unknown -l*
options are implicitly libraries and create confusing configure
failures. emulating the compiler/linker command lines isn't such a great
idea ...
Task-number: QTBUG-29174
Change-Id: I11bac7a6f458664dff8cbe57ed9cd33a08d5e9ec
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
note that the value is written verbatim to the qmake file, so additional
quoting may be required on the command line.
Task-number: QTBUG-30102
Change-Id: I02ca9a44fae82b6932982e6385508b8a304cc1e7
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Since we use the Clang from Xcode's toolchain now, the OS version is
not relevant.
In practice this means we will use clang for Xcode 4.2 and up, which
means it's possible to use clang also on Mac OS 10.6 (Snow Leopard),
where Xcode 4.3 is not available.
Change-Id: I9817e237cdd82d10b93aaaa3c90e35767cdca751
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For Mac OS X we currently specify build tools without an absolute path,
which means we end up using the ones in /usr/bin. This is wrong, we
should be using the tools from the toolchain of the chosen SDK.
For iOS we do specify an absolute path, by resolving the toolchain
path in the iOS makespecs.
To solve the situation on Mac OS X, we move the logic of resolving the
toolchain path to sdk.prf, and share it between OSX and iOS.
For configure we need to duplicate some of the logic from sdk.prf, as
configure pulls out QMAKE_CC and QMAKE_CXX for running some initial
tests and building qmake. The new macSDKify function also solves
the issue of missing sysroot and deployment version in the flags.
Change-Id: Ib1d239c9904cf3ccee5214b313cf6205869a1462
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Is needed now that we write QMAKE_MAC_SDK with a !host_build scope
in qdevice.pri.
Change-Id: I298cc660b496460190337c175aef684a5522d5cb
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
qdevice.pri is not target/host specific yet, so we were loading
it and overriding QMAKE_MAC_SDK to iphonesimulator eg., even
for host tools such as moc.
Change-Id: I10277e60e1da84dda239e32a6f19b40dc48f084a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Version 3.1, shipped with Xcode 4.3, has the same issues compiling Qt's
AVX code.
Change-Id: Icb778fbd9d61f01aa84365661af050c9442d4d7f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Based on the Necessitas project by Bogdan Vatra.
Contributors to the Qt5 project:
BogDan Vatra <bogdan@kde.org>
Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
hjk <hjk121@nokiamail.com>
Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Paul Olav Tvete <paul.tvete@digia.com>
Robin Burchell <robin+qt@viroteck.net>
Samuel Rødal <samuel.rodal@digia.com>
Yoann Lopes <yoann.lopes@digia.com>
The full history of the Qt5 port can be found in refs/old-heads/android,
SHA-1 249ca9ca2c7d876b91b31df9434dde47f9065d0d
Change-Id: Iff1a7b2dbb707c986f2639e65e39ed8f22430120
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
If the command is quoted, it can contain anything but quotes (we do not
support escaped quotes, so single quotes have to be used). If the
command is unquoted we look for the first closing parenthesis. We used
to do this using .*?, but the greedy modifier '?' didn't seem to work,
so we now use an inverse character set.
Change-Id: I40660ce7aef6a6b6d480292d28da1b079bb161da
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Instead of setting it explicitly to 10.6. Before 736e4258a this was
not a problem, as we were hard-coding the version flags as part of
the C/CXX_FLAGS for each makespec, so getQMakeConf would pick
them up automatically. When 736e4258a introduced sdk.prf as the
place to resolve these flags in a single place, it broke the
qmake build for macx-clang-libc++, as we were then falling
back to the 10.6 target hard-coded in configure.
We fix this by duplicating some of the logic from sdk.prf, by
pulling out the QMAKE_MACOSX_DEPLOYMENT_TARGET variable
and adding to the C/CXX_FLAGS.
Change-Id: I04afc7525031727c2504588c70dd3f7892cc8e42
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is enabled only for -developer-builds and only for certain
compiler-version combinations that are in a whitelist.
It also requires each library, plugin or tool to declare whether it is
supposedly clean of warnings. When most targets are clean, we can
consider inverting.
Change-Id: I17b5c4e45aee5078f9788e846a45d619c144095a
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Should be applied to Qt modules. Not interesting for third party
users.
Change-Id: I8fce821af397e3ace011a426c762319f6d30004f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
The dbus_watch_get_fd function was deprecated in D-Bus 1.2 (technically,
in 1.1.1, but that was a development release) because it had a bad name.
Sockets on Windows have file descriptors, but they are not shared from
the same pool as the CRT library's file descriptors.
This commit raises the minimum required version of D-Bus to 1.2. This is
the first requirement raise since this code was introduced in 2006. For
some reason, the D-Bus 1.2.0 release seems to be missing, but 1.2.1 was
released on 04-Apr-2008. That's ancient enough for all distributions
Qt 5 is supposed to run on.
Change-Id: Ia6bbc137fffbb27c77290ed3e32d3380f0ae3c54
Reviewed-by: Lorn Potter <lorn.potter@jollamobile.com>
The LLVM version in Xcode 4.5 and below does not handle the GNU
assembler syntax in the pixman assembly file.
A possible alternative workaround is to include a preprocessed assembly
file using https://github.com/hollylee/gas-preprocessor.
Change-Id: Id95add669c60d3a7da823e5975afdd1f88f71977
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Clarify in the configure --help documentation that the text between
parentheses in the -make option indicates the default parts, not all
the parts that can be chosen from.
Task-number: QTBUG-28826
Change-Id: Iac9cf294b8054823ecfaf262aeafab7779ce4c8b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Must use ; as the path delimiter instead of :
Change-Id: I549e1652ef5bbae09c8fddec3e83ac9f52cec3a4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
this makes it possible to exclude modules from the build without moving
their sources out of the way. substitutes the much-requested -no-webkit.
not adding a symmetrical option, as it is relatively pointless:
to build only specific "leaf" modules, you only need to run
"make module-qt<module> ..." once you configured. and removing
particular "intermediate" modules is achieved with this very option.
Task-number: QTBUG-26697
Change-Id: I25cebdbd029885a2c653c4cde696f9bb78691768
Reviewed-by: Tuukka Turunen <tuukka.turunen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Replace the old sed / template @FOO@ method with echo.
Enable MSYS bash to build qmake.exe
Use qmake/Makefile.unix for all win32-g++ builds.
Change-Id: I6e27d69b28d27131838bbbb3a4ee5a08b470f31b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Instead of setting -isysroot in both arch.test, compile.test, the various
mkspecs, and sdk.prf, we now propgate the chosen SDK as the qmake
variable QMAKE_MAC_SDK, which is then handled exclusivly in sdk.prf.
The QMAKE_MAC_SDK variable, and -sdk argument to configure, is expected
to be of the short-form name, eg macosx or iphoneos, not a full path, as
that's what Xcode also expects. We take care of translating that into
a full path for -isysroot/-syslibroot in sdk.prf, using xcodebuild as
a helper.
Change-Id: I281655b2fa5180c6e78ffdce36824e4a91447570
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
So that mkspecs and features may rely on the host_build test.
Change-Id: I18fee4820d9e2904285afcc7ddb8f1cc3d025fef
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... instead of as a fallback in default_post.
it was this way in qt4, and it requires less code to be written in the
end. we are already doing it for debug/release as well.
Change-Id: I6e02849d61d14a18375cf64a5990768931ebac48
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The chosen makespec may spit out errors for various reasons, which will
influence steps such as detecting pkg-config or the architecture test.
It's preferable to catch any issues with the makespec as early as
possible and exit configure before the errors propagate to tests.
Change-Id: Iecbf3217c36dea9f5e0677c58171b72cb6ce1e0b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Passing -sdk to configure should affect the target build, not host tools.
We skip passing MAC_SDK_FLAG for the host arch test as well, since as for
qmake the SDK should only apply to the target.
Change-Id: I3902355715234b9300a65d3095b9c925d9492311
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
The exact same hunk is present 100 lines below.
Change-Id: Ia3d61037b29186368e30f95f4162282d38bca972
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This allows for example the iOS mkspecs to use xcode-select to get the
path to Xcode's /Developer directory, which is then in turn used to
set up QMAKE_CXX (which is needed by configure).
Coprocess is GNU awk specific, so we're just using getline.
http://www.gnu.org/software/gawk/manual/html_node/Getline_002fPipe.html#Getline_002fPipe
Change-Id: I7e88112bea68f039361d6e96ee581eedf129ab02
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Change the default libexec directory to 'lib' on Windows for default
configurations. This makes sure that e.g. qtwebprocess can actually
find & load the right Qt libs.
A separate libexec directory was introduced to avoid conflicts between
a system-wide Qt in PATH and a custom Qt installation. However, since
there are no system wide Qt installations on Windows this isn't an
issue, but getting the executables to find its Qt libraries is.
Alternatively we could have also placed it in the 'bin' directory.
However, putting it in the 'lib' folder carries the notion that,
unlike the binaries in the bin, the libexec executables might have
to be deployed with a target application.
The exception is when a separate archdata prefix is specified, and
$$archdata/lib won't contain Qt libraries. In this case we use libexec
like on the other platforms too.
ChangeLog: [Qt for Windows] Fixed launching of QtWebProcess.exe by
changing default libexec directory to 'lib'.
Task-number: QTBUG-29661
Change-Id: Icbb15fb98474d6fef8ac9310f2e2b482d3282f79
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Jocelyn Turcotte <jocelyn.turcotte@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
On Windows, it's completely different and we don't currently support that
compiler anyway.
Change-Id: Ie3365ea103c93c63e79ebb1d4908c361173ac449
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The current code matches *g++*, which matches "clang++" and detects
Clang as GCC. That's highly incorrect.
Change-Id: Ifd85bbd35aa130be3094fc75d471614d06ca23bd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Keeping accessibility and only disabling the bridge will
enable more builds to work.
Warning about disabling accessibility disabled is needed
because in QStyle it is used to discover semantics about widgets
(if a toolbutton is in a toolbar).
Change-Id: Iae4e6ab63479743bdd70cba4b1954ec7cf3f88e9
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
eventfd(7) uses less resources than a pipe, as it only needs to store a
single 64-bit integer, as opposed to a full buffer.
It was introduced first on Linux version 2.6.22 and glibc 2.7. However,
both the configure-time test and the runtime usage require the use of
EFD_CLOEXEC for thread-safety, so this code will be enabled only for
Linux 2.6.27 and up as well as glibc 2.9 and up.
Change-Id: Ic7e10b28d7b1d4ca24be614ed84055c4429a68e4
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
On Mac, GCC and Clang print "(framework directory)" at the end of the
directory listing for includes if that's a framework dir. The directory
with "(framework directory)" at the end does not exist, so it doesn't
affect anything by being there.
But we don't have to keep the list longer just for that.
Change-Id: I3d031d3d15c75801ec0d6112b2c913bd63e5def3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Make the settings path to be relative to $prefix, instead of absolute.
And update the configure -help output to match the actual code.
Change-Id: I71e4ad6e3db046fec95ef057ae7f7bc566bc5794
Reviewed-by: Sune Vuorela <sune@vuorela.dk>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
it's completely broken, and i have no time to fix it properly now.
configure runs no qmake -r by default any more, so it's fast enough.
Change-Id: Ib2b4c68f1fc2fe95accecbe93dd5a87c9b015692
Reviewed-by: David Faure (KDE) <faure@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
The configure.exe already supported the -directwrite flag for some time.
This commit adds this flag to the configure script as well so
environments which use MinGW as cross-compiler can now also
optionally enable DirectWrite support.
The original configure.exe pieces were added in commit
c0fed43b04dec8bd549043d3ea5e28908128082c of the Qt4 repository.
The directwrite argument which this commit adds to the configure
script and the behaviour of it should be exactly the same as the
current configure.exe.
To get Qt built with DirectWrite support using the MinGW-w64 toolchain
at least mingw-w64 trunk revision 5451 (Nov 10 2012) is needed
Change-Id: I519718068cf5732c7ebcbf0a0fafb6b747db0bcf
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This means the xcb plugin library will be named libqxcb.so instead of
libxcb.so, which doesn't clash with the system's libxcb.so. We need to
consistently apply this on all platforms for static linking to work.
Change-Id: I1640a7cae7b9846bbe62b19ab1c2c5bad7d02b4c
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Configure will now generate QT_DEFAULT_QPA_PLUGIN qmake variable
to specify the default QPA plugin.
"CONFIG += qpa_default_plugin" statement in application .pro file
will add the default QPA plugin into QTPLUGINS.
"CONFIG += qpa_minimal_plugin" statement in application .pro file
will add the minimal QPA plugin into QTPLUGINS.
Task-number: QTBUG-28131
Change-Id: I12a241005f30b37467d783b50f0369b47e605e68
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
the compile-all-mocs-as-one-file feature is gone for years
Change-Id: I6c35bce59c36b6920af2498661172b5938eeba52
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
they cannot be legally used outside qtbase - it's the antithesis of
modularization.
Change-Id: I847844ea0ddce599f130f396d68cb61fa8f34135
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
-largefile is regarded as a library named argefile and added to
Makefile as a link flag. It will cause a link error.
Change-Id: I8ac30896d4e473f7e98c937c8906b1b9c620cf1e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
User applications are those that users run directly, whether it be for
development or not. The executable binaries that the user does not
usually run but is still required for proper functioning are called
"program executables" in Autoconf and they are placed in libexec.
This commit adds support for "program executables" in Qt by adding the
-libexecdir option to the configures, the qmake variable
QT_INSTALL_LIBEXECS (note the plural, to match all other properties),
and QLibraryInfo::LibraryExecutables.
At the time of this commit, the only expected "program executable" is
the QtWebProcess, the WebKit2 helper process from QtWebKit.
Change-Id: I66c3a3e0cf7f9d93b5f88f55f18e957faff608fc
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
The include paths that the mkspecs set into the OpenGL/AGL frameworks
must take the SDK into account.
(The headers in 10.8 have slightly changed wrt 10.7, leading to compile
errors because framework style includes (<OpenGL/foo.h>) within the system
headers are resolved to the SDK framework headers.)
Change-Id: I6113cdb95b462d587f593682e03e81e920f3f672
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Added prepare_docs to qt_build_config.prf (it was added
directly in configure in the source branch)
Conflicts:
configure
tools/configure/configureapp.cpp
Change-Id: I1337c69fc62b1c934e3e39b4409e4857440c9db8
This commits adds a -qmldir configuration option for the configures to
allow the user to change the default location (it defaults to
$archdatadir/qml).
It adds a QLibraryInfo::Qml2ImportsPath value for
QLibraryInfo::location, a qmake property of QT_INSTALL_QML and a qt.conf
configure location entry "Qml2Imports".
At the same time, it makes the qmake .prf files dealing with QML plugins
be the QML 2 version. Those files are new in Qt 5, so we have the option
to choose which version we want to use.
Discussed-on: http://lists.qt-project.org/pipermail/development/2012-October/007136.html
Change-Id: I8c1c53e8685a5934ed0a9a42ba5663297b81a677
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Architecture-depedent Qt data defaults now to something under
-archdatadir. Architecture-dependent data is everything that contains
machine code (e.g., plugins) as well as anything that hardcodes
build-specific data, like qconfig.pri and qmodule.pri. That is:
QML imports: $archdatadir/imports (includes plugins)
Qt plugins: $archdatadir/plugins (machine code)
Mkspecs: $archdatadir/mkspecs (build-specific)
Architecture-independent Qt data defaults now to something under
-datadir. This option existed in Qt 4, but did not differentiate between
arch-dependent and independent. Following Autoconf's lead, --datadir is
the *independent* data root.
translations: $datadir/translations (.qm files are arch-independent)
docs: $datadir/doc
By default, both new options are equal to the Qt install prefix.
(Strictly speaking, for complete Autoconf compatibility, we'd need a
--datarootdir=$prefix/share, --datadir=$datarootdir/qt5 and
--docdir=$datarootdir/doc/qt5, but that's just nitpicking and
unnecessary)
Change-Id: I39c886a6a2d2d2c0b11923c50974179e21f2af76
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
the only thing -no-prefix-install did was changing the install path
defaults on mac. and the result didn't work particularly well.
Change-Id: Iadd0f4b494b6920b595e184f858ef810f5222b0c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This has (and still does) caused lots of grief since
it means accessibility was often unintendedly not built.
Instead copy the lib-at-spi-2 header file needed for the
type enum and build it by default again.
Change-Id: I1ba26f20edff1aeb444c96a37928f36230ac7576
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Some of the xcb- libraries we depend upon are not (yet) common across
distributions. This is problematic for binaries that should be working
on different distributions. The patch mitigates this by:
Adding the files from
libxcb-proto (version 0.1.6), compiled with libxcb-1.5
xcb-util (version 0.3.9)
xcb-util-image (version 0.3.9)
xcb-util-keysyms (version 0.3.9)
xcb-util-renderutil (version 0.3.8)
xcb-util-wm (version 0.3.9)
from xcb.freedesktop.org/dist to src/3rdparty/xcb.
Adding a configure option '-qt-xcb' to use the sources instead of
linking to the respective runtime libraries.
Task-number: QTBUG-27803
Change-Id: I6ea87daa382871b2b9072a601511523fa0b9f44b
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
By not making this a compile time decision we ensure forward
compatibility for older xcb versions if the xcb plugin is built against
a newer xcb.
Change-Id: I744777d53bf7b8deb6eff372494f4403d19d364c
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
we now have qt_build_config.prf which can contain static code.
Change-Id: I3f0ae142fdc5ffb4e1d25e628e809ba15b5f0ac4
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the function is automatically performed by debug_and_release.prf,
regardless what we do with this flag.
Change-Id: Iddec69b35e0e905fdf4133ee240af37d3a8ada0b
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>