Qt 5.3 is the minimum requirement these days. Remove all fallback code
from sources and project files.
Change-Id: If6188a471197acadda4d6baee71804ba1a8026c6
Reviewed-by: Eike Ziller <eike.ziller@digia.com>
(cherry picked from qtcreator/847f10e9ccc8c3541782a790e04c85c6b4c701da)
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Less typing and less cycles than join(QString) where appropriate
Change-Id: I6ebc0e17e4d7fd9845864dd95b7de4ba4dad6906
Reviewed-by: Eike Ziller <eike.ziller@digia.com>
(cherry picked from qtcreator/6431ab2c799553623ec3fe6a79f1e85484558dd6)
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
this fixes an assertion failure with qt4 mingw specs when PATH contains
a "." element.
Task-number: QTCREATORBUG-12528
Change-Id: I2b6b7e02cf38881d40bd78bb0d705f7d58d0736c
Reviewed-by: Christian Kandeler <christian.kandeler@digia.com>
(cherry picked from qtcreator/d0428a05220ed0550dd84cdb8299a1fb37b0fe72)
Reviewed-by: Christian Kandeler <christian.kandeler@theqtcompany.com>
assigning a relative path to QMAKESPEC or QMAKESPEC_ORIGINAL (in the qt4
windows legacy code) would lead to an assert further down the line.
just ignore such attempts silently.
Task-number: QTCREATORBUG-8477
Change-Id: Ie53d0ef004c743284b85de4e89f112e0161ff4b7
Reviewed-by: Daniel Teske <daniel.teske@digia.com>
(cherry picked from qtcreator/e017a1dc8b2030e509d6198315e9f6a9869667e7)
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
just syncing up with qtcreator.
Change-Id: I2bda6961f6f1164bdc58acd78fa3d2221977f0cf
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
(cherry picked from qtcreator/765ad6c3d28813d4baa0aeafd03076ba76557d3d)
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
it could be only triggered by abusing the function (no expansion
actually done), and nobody is using this to start with, but still ...
Change-Id: I3d4a23ae4d1eea07955572d8213094e0dc218f6d
Reviewed-by: Daniel Teske <daniel.teske@digia.com>
(cherry picked from qtcreator/cdc2a0f72334268684e0407e9b04b3188e00d4bf)
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
This prevents an access to free'd memory when opening qtcreator.pro.
Looks like qml2puppet.pro gets added to that cache in QMakeVfs::writeFile
with part of the including pro-file's filename in it. That part gets
cleaned when that containing ProFile goes out of scope, leaving a key in
QMakeVfs::m_files free'd but accessible.
Change-Id: I80b43d2fbb66c214647497ea97e6e3a587e274d6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
(cherry picked from qtcreator/336c3159617cdb3edd35021b5fb312d4d43f9a84)
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
QProcessEnvironment caches keys, so we must not pass it QStrings created with
fromRawData()
Task-number: QTCREATORBUG-9142
Change-Id: I29fade02f3bc4110fafb1b04d44f2e653951a2ae
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
(cherry picked from qtcreator/99f15f1706868c4b2f84bc4164451bd69b3b8188)
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
we execute foreach loops now. this is (mostly) safe nowadays, because
a previous change added precautions against exponential value list
growth, so it's unlikely that two nested loops would keep the cpu busy
for a day as before.
we continue to exclude forever loops and loops with excessive integer
counts.
Task-number: QTBUG-8550
Change-Id: Iaa116086986cc7fd5023834753f791dd205102e5
Reviewed-by: Daniel Teske <daniel.teske@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
(cherry picked from qttools/dd4d594c787a62fa8aa12695c5d115c71b59bacd)
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
ProFileCacheManager::discardFile(s) may remove an entry from
the ProfileCache only when it is unused (which is the case iff
ent->locker is zero).
Change-Id: I9df2079087af6bd0d35dd121db6222e8a6ec9389
Task-number: QTCREATORBUG-14730
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
(cherry picked from qtcreator/dedcd25924743e494055c1e0195aeef0f3983a1d)
(cherry picked from qtcreator/b335b2a083e456e2b44b1e9454a0f4cd41e2a397)
(cherry picked from qtcreator/a027cbcd7051c634a51b6029dcb8a5b4bfe8b046)
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
... and make use of it in qt.prf.
[ChangeLog][qmake][Unix] Added support for relative paths in
QMAKE_RPATHDIR.
Note that this technically breaks backwards compatibility, as relative
paths were previously silently resolved against $$_PRO_FILE_PWD_. This
was not documented and seems rather useless, so i'm not worried.
Change-Id: I855042a8962ab34ad4617899a5b9825af0087f8a
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Jake Petroules <jake.petroules@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
msvc-desktop.conf does disable the exception warning for building all
modules, so use the same set of compiler flags for building qmake.
Change-Id: I97026f3cb78e656e8de76e1c8afe19cec6501499
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Since the Qt headers require them now, we need to ensure that happens
properly.
Change-Id: Ib306f8f647014b399b87ffff13f14196c2c75bef
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
It's easier to parse than qglobal.h. The objective is actually to have
macros with parts of the version number, so the major or minor numbers
could be used in other preprocessor macros.
Change-Id: I42e7ef1a481840699a8dffff1404eda1dd5c308d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
the library inside a bundle doesn't have an extension.
this doesn't really fix anything except suppressing the error message,
as we discard the result of the operation anyway.
Change-Id: Idfe3d1714dedb59d9d3e86a65f074e516c431389
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
at least the mingw version we use now interprets the sequence \# as a
literal hashmark, which completely defeats the previous hack.
the new hack escapes the backslash with another backslash, which appears
to work. however, make does *not* remove the additional backslash, so
the result is a bit ugly.
Change-Id: I591a2be443880b162094d04e5a5e624216b59311
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Suffix rules are the old-fashioned way of defining implicit rules for make.
We don't need them as we generate explicit rules for all sources we build.
[ChangeLog][qmake] Makefile output no longer contains implicit
suffix rules, as all sources are built using explicit rules.
Change-Id: I4ecfa5b80c8ae33aea8730836f3baf99dd4951dd
Task-number: QTBUG-30813
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Instead of lumping both Objective-C (.m) and Objective-C++ (.mm) sources
into the same pile, passing them on to the same compiler as for C++ (CXX),
with the C++ flags (CXXFLAGS), we follow Apple's lead and treat them as
variants of the C and C++ languages separately, so that Objective-C
sources are built with CC and with CFLAGS, and Objective-C++ sources
with CXX, and CXXFLAGS.
This lets us remove a lot of duplicated flags and definitions from the
QMAKE_OBJECTIVE_CFLAGS variable, which in 99% of the cases just matched
the C++ equivalent. The remaining Objective-C/C++ flags are added to
CFLAGS/CXXFLAGS, as the compiler will just ignore them when running in
C/C++ mode. This matches Xcode, which also doesn't have a separate build
setting for Objective-C/C++ flags.
The Makefile qmake generator has been rewritten to support Objective-C/C++
fully, by not assuming that we're just iterating over the C and C++
extensions when dealing with compilation rules, precompiled headers, etc.
There's some duplicated logic in this code, as inherent by qmake's already
duplicated code paths, but this can be cleaned up when C++11 support is
mandatory and we can use lambda functions.
Task-number: QTBUG-36575
Change-Id: I4f06576d5f49e939333a2e03d965da54119e5e31
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
as a side effect, this makes the extensions used for searching libraries
configurable under windows (QMAKE_LIB_EXTENSIONS).
Change-Id: I3e64304fcadbfe74d601b50a70a73180c894503e
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
first, store the library's full name in the .prl file, like we do on
unix. this is not expected to have any side effects, as QMAKE_PRL_TARGET
was entirely unused under windows so far.
then, rewrite the mingw library handling: instead of letting the linker
resolve the actual libraries, do it ourselves like we do for msvc. we
could not do that before due to the partial file names in the .prl
files: if the library didn't exist at qmake execution time, we'd have to
guess the file extension (the msvc generators never had that problem, as
they know about only one possible extension for libraries anyway).
make use of processPrlFile()'s ability to replace the reference to
the .prl file with the actual library. that way we don't need to
re-assemble the file name from pieces, which was fragile and
inefficient.
QMAKE_*_VERSION_OVERRIDE does not affect libraries coming with .prl
files any more. additionally, it is now used literally (not
numerically), and values less or equal to zero lost their special
meaning as "none" - this isn't a problem, because that's the default
anyway, and there is no need to override bogus versions from .prl files
any more.
no changelog for that, as i found no public traces of that feature
outside qtbase.
[ChangeLog][qmake][Windows] Libraries coming with .prl files can now
have non-standard file extensions and a major version of zero.
[ChangeLog][qmake][Windows][Important Behavior Changes] The .prl files
written by earlier versions of Qt cannot be used any more. This will
affect you if you depend on 3rd party libraries which come with .prl
files. Patch up QMAKE_PRL_TARGET to contain the complete file name of
the library, and replace any /LIBPATH: in QMAKE_PRL_LIBS with -L.
(the part about /LIBPATH: actually refers to the next commit.)
Change-Id: I07399341bff0609cb6db9660cbc62b141fb2ad96
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
don't look up the files and normalize the paths multiple times, as this
is inefficient and hard to understand.
on the way, processPrlFile() got unnested, and libExists() got nuked.
note that a missing QMAKE_PRL_TARGET will be now complained about, which
really should never happen.
Change-Id: Ibcd77a7f963204c013548496ecd2d635e1a4baba
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
don't prepend the normalized path to the target name, but replace only
the filename in the original string. this ensures that any variables in
the path are preserved.
Change-Id: I58c2b54b7114bfdbf659e6a6ce3e02c2611900d4
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
the dependency doesn't seem to make any sense.
while the deduplication is a bit naive and thus dangerous, it was
already enabled by default anyway by virtue of link_prl being enabled by
default, so this amounts to a non-change for by far most projects.
use no_lflags_merge to disable it.
Change-Id: Ia441931ddbc41ed617aee21e6fe8821e3448d2bc
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
seems pointless to tear apart the functions, on the way duplicating some
boilerplate.
Change-Id: Ide3697ca1c931e8de607ac48c21cecce4781fe13
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
A \target whose purpose is to link to the top of a
page (and not to a section within a page) works better
as a \keyword, because \target generates a
new html anchor which, in this case, is not tied to
any title element on the page.
A \keyword links to the page itself, as expected.
Task-number: QTBUG-48482
Change-Id: I957551edd0eb7e665358d04b37dab41e2686b851
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
this feature was added with a dubious commit message a decade ago, was
undocumented, and there are no public traces of it being used.
if i had to guess what it was meant for: to be able to consistently use
-lfoo throughout a project and centrally (e.g., in .qmake.cache) choose
to use foo<bar> (bar possibly being "d") instead. however, more explicit
methods are being used instead, including in qt itself.
Change-Id: Ic3a98dc3aec59876f26909fbf9f7aba32baa05bf
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
"why not use libtool?" -- sam
"srsly dude?!" -- ossi
[ChangeLog][qmake] Support for CONFIG+=compile_libtool was removed. Use
CONFIG+=create_libtool and/or custom compilers instead.
in addition to its utter insanity and superfluousness, this feature was
apparently quite broken anyway (QTBUG-35745).
Change-Id: I8147a2953f5f065735ae3a2206cd5d33a7c1809a
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
this code would get enabled when *not* compiling with libtool, and would
try to use the real library in .libs/ when one tried to link the .la
file (i.e., it would reproduce libtool's functionality). that directory
structure is found only in build directories, so this code was
apparently meant to support mixed projects. that doesn't sound useful.
on top of that, the other code paths that were supposed to treat .la
files like .prl files were disabled before initial release (because
Somebody (TM) noticed that their code "doesn't behave well"). this code
here did the same thing, but at the wrong abstraction level.
as a side effect, this removes an infinite recursion problem in that
code.
Task-number: QTBUG-46910
Change-Id: If5291f5ff42c1412075c195753162c54598a250e
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
there is no need to consider the "-framework foo" syntax, as we fully
control the list and insert elements exclusively as "-framework" "foo" a
few lines down.
Change-Id: I95fa8b46f53673ea3df1a67a2a44d11f7d679cc6
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
the code had a dead variable assignment and no side effects.
Change-Id: I9add8f1776f23a29c103b46dc725b9f386a4495a
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
each instance of the class is used only once.
Change-Id: I33e01537ee3a731c0f9758ec65c74938e4bec28c
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
it appears to have been some weird attempt at back-mapping file names to
-l arguments, which has been made ineffective with the partial #if 0.
i can't even describe what it did at this point.
Change-Id: Ie31cbbe7fab8b21b039bfff5877397af07731f1b
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
in retrospect, we were too conservative in 925fd32a2d making the
"feature" optional - it simply makes no sense to have qmake
automatically find the highest major (!) version of a library based on
a loosely defined platform-specific convention (not standard, unlike
ELF's .so versioning) with side effects.
Change-Id: Iba92df433b199a9fbff88358f6e0f6835f2e813d
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
the assumption is that if somebody bothers to actually specify a file
name, they'll most probably go all the way to specify the *correct* file
name. otherwise, they'll use -L/-l flags to specify the libs in a
cross-platform way and rely on qmake's magic.
this code was initially added for the purpose of invoking
findHighestVersion() under windows. this has been off by default for a
while now.
at some point, the code did also swap qt for qt-mt and vice versa if the
specified one was missing. this is obviously gone for a while as well.
the unix code was pretty much broken since day one: there was a regex
match on lib<stub>.* against <stub> itself, which obviously could not
have ever succeeded. consequently, the subsequent code ran into a path
that tried the file name with a trailing dot (instead of a new
extension), which never produced anything meaningful.
[ChangeLog][qmake][Important Behavior Changes] The library lookup has
been simplified. It may be necessary to be more explicit in some edge
cases now.
Change-Id: I5804943f1f7a16d38932b31675caabbda33eada7
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
make sure that all specs define QMAKE_{PREFIX,EXTENSION}_{SH,STATIC}LIB,
and adjust the code to make halfways consistent use of these variables,
in particular on windows; Win32MakefileGenerator::getLibTarget() is gone
as a result, as is QMAKE_CYGWIN_SHLIB. still, tons of hardcoded "lib"
references remain in the unix generator, because no-one cares.
Change-Id: I6ccf37cc562f6584221c94fa27b2834412e4e4ca
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
it would cause the unix generator to set TARGET_EXT, but that wasn't
used anywhere. so remove the dead code. if it ever gets re-introduced,
it will be as QMAKE_EXTENSION_EXE.
Change-Id: I44ce3e612651fd229177e37ab6c8879cd8c474b7
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
it was used only once, and virtual for no reason whatsoever.
Change-Id: I99411be3dac93d8a129441f656b2443d09108564
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
rvct and armcc support are remnants from symbian, while the ti linker
support was never completed in the first place.
Change-Id: I5c9d7f0ce67de24c348cbee4af618a499fe06f16
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
there is no reason to expect the various list elements to be
space-encumbered, or to tolerate it if they were.
Change-Id: I1a2e5c8d30456b640408503334c55f9262792db5
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
there should be no flags other than /LIBPATH: in LIBS (and the variables
that end up in it) - these belong into QMAKE_LFLAGS.
while not very important, this change enables the use of drive-relative
paths using unix path separators.
note that on unix, arbitrary flags must be supported in LIBS due to GNU
ld's --push-state and related position-dependent flags (-whole-archive
in particular). luckily, on unix, flags start with a dash, not a slash.
Started-by: Dyami Caliri <dyami@dragonframe.com>
Change-Id: Ie5764f14d34ad13020ca010499594eed8c69a4a1
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
On OS X with a framework-based build of Qt, the 'Libs:' line of the
.pc files generated by `qmake` references the framework. This requires
two separate arguments to the linker: The fixed string '-framework' and
the name of the framework (e.g. 'QtCore'). Only the latter might need
quoting. Prior to this fix, they were treated as a single argument (e.g.
'-framework QtCore'), thus always quoted because of the contained space,
and later lead to errors when trying to link a Qt framework discovered
via `pkg-config`.
Change-Id: I5c11ee651048832007e2ee4ebcbcf2e3212c8f48
Task-number: QTBUG-47162
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Consider a debug_and_release build of a static library.
Set DESTDIR to different values for debug/release.
Let TARGET be the same for debug/release.
Now qmake would generate code in Unix Makefiles like this:
rm mylib.a
ar mylib.a ...objects...
rm debug/mylib.a
mv mylib.a debug/mylib.a
and for release analogous. This clashes when building in parallel.
This patch resolves this conflict by reducing the commands to:
rm debug/mylib.a
ar debug/mylib.a ...objects...
We believe that every ar implementation that's in use for Qt
is able to operate on files in subdirectories.
[ChangeLog][Important Behavior Changes][qmake][Unix] QMAKE_POST_LINK
steps of static libraries are now required to operate on $(TARGET) in
$(DESTDIR) instead of $$OUT_PWD. This matches the Windows backends.
Task-number: QTBUG-48287
Change-Id: I192f488ed74c56bc32862426d9e9d4237d9b8135
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Set defaults before parsing compiler options.
UsePrecompiledHeader, CompileAsWinRT and GenerateWindowsMetadata
options were overwritten after parsing the options.
Task-number: QTBUG-46978
Change-Id: I8c4e423cd13f575fa679b114108b693937908549
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Andrew Knight <andrew.knight@intopalo.com>
$ORIGIN (or $LIB) needs to be escaped to survive the trip through
make and the shell.
this shouldn't break anything, as there was simply no way to get it
right so far.
Change-Id: I86337c5994d10dae2e80dd2f858f74874b14bca7
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
While generating Visual Studio 2015 solution files for a project using
the subdirs template qmake writes out both the header for version 2015
and version 2013. The problem is a case fall-through.
Task-number: QTBUG-48110
Change-Id: Ib6ddc1ceb306be9b3098d7b7c66a8ffabbd86481
Reviewed-by: J-P Nurmi <jpnurmi@theqtcompany.com>
Reviewed-by: Andrew Knight <andrew.knight@intopalo.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Valid characters are (A-Z,a-z,0-9,-,.).
It is unlikely that we will see anything more exotic
than '_' in bundle/library names, go ahead and replace
that character only.
Task-number: QTBUG-46824
Change-Id: Ia97b7cd6247f40a970b4919363ffb66fb347186c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
unlike everywhere else in this file, destdir is not pre-quoted here.
Task-number: QTBUG-47775
Change-Id: Ia5b0c56bbdd3eb095f81b0f615d68a338ffa52c5
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
- ApplicationTypeRevision has been updated to 10.0 in the final VS2015
release
- For Universal App project one needs to specify
WindowsTargetPlatformVersion and WindowsTargetPlatformMinVersion
- Disable adding Qt libraries to the DeploymentFiles variable for
Universal Apps. Before an error occurred during build as windeployqt
asked to package the very same files. However, windeployqt also takes
care of plugins and hence we prefer to rely on windeployqt and disable
the link step parsing.
Change-Id: I5180519cabde60dbc7786ef27a6fbe0ef2ac44f3
Reviewed-by: Andrew Knight <andrew.knight@intopalo.com>
The SDK Version has been updated, hence include and lib directories were
wrong. Luckily, Microsoft introduced an environment variable in the
final VS2015 release to identify the location. Also has the benefit to
reduce hardcoded paths.
Change-Id: I9726db031d87d119bc7326154b24554c4b685d57
Reviewed-by: Andrew Knight <andrew.knight@intopalo.com>
Reviewed-by: Mika Lindqvist <postmaster@raasu.org>
Instead of going to qmake to generate the makefile that we want, we write
the makefile directly and include it from the generated makefile. This
leaves us with a single top level makefile for handling exclusive builds
through xcodebuild, and covers all the various build configurations in
a unified manner. It also allows for improved test device handling.
Change-Id: I66851f181ac4da2c8938645e0aa95ffa0fee33c7
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Add a link to the topic that lists all Qt modules with links to
their documentation.
Change-Id: I0f488ea8c2f3479c7bace6ffbdbb7a70324c1649
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
SDKs generated from VS2013 use a different folder for
build settings than those generated from VS2012.
Check both folders, before rejecting a potential
SDK.
Change-Id: I5bee5cc3771352adaab07d39ebbc350618f6c573
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
... by marking the ctors (if any) explicit and the
function-call operator const.
Change-Id: Ia65fbad0dfdccbb31d630a5501c4d6f0f5aa3623
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
They are already held in QVector.
Change-Id: Ib1266956c860ecd4671501ab12ab932a8ce9b7d6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Conflicts:
src/plugins/platforms/cocoa/qcocoafiledialoghelper.h
Manually fixed src/testlib/qtestcase.cpp to return the right type.
Change-Id: Id1634dbe3d73fefe9431b9f5378846cb187624e4
Visual Studio 2015 integrates the Windows Runtime development
tools, including the msvc2013 compilers.
This patch fixes the error that mspdb120.dll is missing.
It is typically included through PATH variable of the shell,
which points to the "wrong" location in this case.
Change-Id: I46289721912d6b517c6083612582f67536d28b11
Reviewed-by: Andrew Knight <andrew.knight@intopalo.com>
When PRECOMPILED_HEADER is set to foo/bar/stable.h and
PRECOMPILED_SOURCE is empty, then a C++ file foo/bar/stable.cpp
is generated that contains the include "stable.h".
We must pass the exact string "stable.h" to the /Yc compile
switch instead of "foo/bar/stable.h".
Commit dc612acdc6 introduced this
regression to allow to have PRECOMPILED_SOURCE in a different
directory than PRECOMPILED_HEADER.
Change-Id: I1a7e096c0455b946a5660d23c70c72abd4c7ac1b
Task-number: QTBUG-46679
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
With Xcode7, Apple added support for compiling apps to bit code
instead of binary (*). But this is only supported when the deployment
target is at least 6.0. And in Qt-5.5, the deployment target is
still set to 5.1.1. The result is that every Qt application will fail
building once people move to Xcode7.
Instead of bumping the deployment target (which we plan to do
for Qt-5.6), we choose to switch off bit code for now.
*: https://developer.apple.com/library/prerelease/ios/documentation/IDEs/Conceptual/AppDistributionGuide/AppThinning/AppThinning.html
Change-Id: I23001563439a7726506b7cd2dc77a82533b8a27b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Deprecate the qmake variable DEPLOYMENT that was used for installing
files on remote devices for Windows RT and Windows CE Visual Studio
projects. Use INSTALLS for both nmake and Visual Studio projects.
[ChangeLog][core][qmake] Deprecated the qmake variable DEPLOYMENT in
favor of INSTALLS.
Task-number: QTBUG-21854
Change-Id: Ia9d2c69feb7d87b0b9dc69ff7c0a68be35a57acd
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
qmake win32 generators by default used values of DEFINES for RC
preprocessor defines, too. For simple defines this works. For
string literals this failed for the .vcxproj files:
DEFINES += "FOO=\"BAR BAR\"" works for CL but fails for RC.
DEFINES += "FOO=\\\"BAR BAR\\\"" works for RC but fails for CL.
This patch introduces the qmake variable RC_DEFINES. The variable
contains the preprocessor defines, that are used for RC. If the
varible is not set, the DEFINES values are used for RC.
Task-number: QTBUG-44184
Change-Id: I4202271759d29de8c1829347ae3ef117eda54b38
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
they are self-contained, as they are the result of another project's
full resolution. consequently, recursing them just burns cycles, and
additionally introduces the risk of an endless loop if the file is
botched.
Task-number: QTBUG-12711
Change-Id: I401ee691c170092cc61fe05538cec4272ed8f922
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
we use qmake properties in the installed .prl files, so the paths
need to be converted to native separators before emission.
Task-number: QTBUG-46217
Change-Id: If3fb0a84488795478fc2a701271c931c62eba6aa
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
... by implementing a fake ln in qmake.
symlinks are supported only since vista (we officially still support
xp), and even there are permission-restricted (MS being (rightfully)
afraid of symlink attacks). so we fake the links by copying the files
instead.
the previous hack was a bit naive, simply using cp/copy instead of ln.
this didn't work with relative paths, as real symlinks are resolved
against their parent directory, not the working directory of the "ln"
command. the new fake does this correctly.
Change-Id: Ia2f5d68a39d6ffcc8a4383f9d0fc63a9da0a05c3
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
This allows creation of applications for
- x86
- x64
- arm
While the arm build theoretically also allows to launch on
a mobile, it currently asserts on runtime. Either we will
create a new mkspec for Windows 10 Mobile in the future,
or do runtime checks for the environment. That also depends
on whether there will be a separate SDK by Microsoft.
Change-Id: I510bfc88410a5b5a1eb7c37f7f43888d1e5dda0d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Reviewed-by: Andrew Knight <andrew.knight@intopalo.com>
Like application bundles on OSX, the plugin bundle has its Info.plist
in the Contents directory.
Change-Id: I216fa79857924beb0e9c5fcc4a8d06b197a3f383
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
since commit 22edeb3f4 (private; anno 2002), the generator would extract
-prebind and translate it into a PREBINDING property in the pbx file.
the writeout to the pbx file got lost in the rewrite for Xcode 3.2
(commit 66f6e5b1; anno 2012).
this isn't particularly bad, as prebinding is obsolete since OS X 10.3.4.
we now go the last mile and remove the handling of the flag. that means
that remaining projects which still use it (meaninglessly) will get a
warning from Xcode, which is kinda what we want.
QMAKE_LFLAGS should have never been part of the library iteration loop.
it was added there in the prebind handling commit, so we can get rid of
it again now.
Change-Id: Id7dee2b1e248bb2bd7aa7a3e66f82057921afffd
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
we need to do full shell quoting, not the limited whitespace quoting.
Task-number: QTBUG-46224
Change-Id: I41bc9aee556ca680dce0875b58159a31db962452
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
it obviously makes no sense to set up the loop if the container is empty.
as we now have that conditional anyway ...
Change-Id: I6d95c0102734852443c188012bfcb076d879581e
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
QMAKE_FRAMEWORK_VERSION has a fallback to VER_MAJ (which derives from
VERSION), so it's pretty much always set, thus defeating the previous
check.
amends 6cb495de.
Task-number: QTBUG-46215
Change-Id: I2c5560c469617ebeab978e4de78df00baf38d49d
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
this makes it possible to use these functions without an evaluator.
Change-Id: I23e4ec141b427f4c3c8b647305532be179058c07
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
the messages contain a trailing CRLF, which is not helpful.
Change-Id: I4a27115a191dc416a62e28a41f2a9c5893bdc64b
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
the i/o functions are not very consistent about having the dot already
in the message. the windows api does, and qt passes this on.
Change-Id: I2d1a213965e15478985d6eff205689ea44aa2a03
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
a single quote must not disrupt a double quoted string and vice-versa.
Change-Id: Ibb277bc1c930a7dbe9199ca572507ababbcfae4c
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
also adds documentation, which is kind of a sanity test. ehm.
Change-Id: I6b520e8b505a2bfbb1e376fa72be0f140227a3a4
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reduce the size of .text section in QtCore by 4.5KB and in QtNetwork
by 26.5KB.
Change-Id: If7998776166b9681c1e4b24c51d40444aa996d7a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Currently, the Xcode generator uses "sourceTree = <absolute>" for
all PBXFileReferences. But the paths we use for referencing
libraries are relative. This patch will change this, so that we
always use absolute paths to be consequent.
This will fix a crash in Xcode that happens when opening
projects generated by Qt.
Change-Id: I3a372b93598a777c96ba353205cf19710a5923f5
Task-number: QTBUG-45966
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
ProjectBuilderMakefileGenerator::openOutput should only change back
Option::output_dir when creating a pbx file inside an Xcode project.
Since the pbx file will be placed inside a different directory than
output_dir when creating an Xcode project, MakefileGenerator::openOutput()
will redirect output_dir to be inside the Xcode project as well. Since
we don't want this redirection, we change output_dir back to what it
was once the call returns. But we should only do this when creating
the whole Xcode project, since only then we create a pbx file that
is different from output_dir in the first place.
A bug with this is seen when making qt_makeqmake.mak (which is a
helper makefile inside the Xcode project). That file will only
regenerate the pbx file (and not the whole Xcode project), which
means that we don't enter the fileName.isEmpty() section, which
means that output_dir should stay as it is.
Task-number: QTBUG-45826
Change-Id: I03d5c3dec395ff4768f9272fd1981c6fd35efb1e
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
don't try to install the primary target, as it obviously doesn't exist.
however, we must not disarm bundle installation.
Change-Id: I3074150f749220d77c1210a4978e71aff9c9a3a9
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
QMAKE_BUNDLE_DATA itself does as well, and it can refer to versioned
resources.
Change-Id: I3d9bf23c2ff81dbb1cd929f3f0e0ce1e67f3258a
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Remove a superfluous implementation of
VcprojGenerator::replaceExtraCompilerVariables.
The implementation in the base class is exactly the same.
Use that instead.
Change-Id: Ie7d995be1b0d55fbefd15ae6b7a992237d97839c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
this makes the distclean targets work throughout qt.
the dreaded confclean target is aliased to distclean.
Task-number: QTBUG-8202
Task-number: QTBUG-20566
Change-Id: I7ac8e3b5b0110825dc93e4fa885281db91c6cf83
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
this affects only files explicitly listed via the .clean member without
placeholders, so more or less a corner case.
Change-Id: I7bd55948130aaee116d1a4bebbad0c445b76197b
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
it helps enormously to put spaces between target names ...
Task-number: QTBUG-45533
Change-Id: Ic41f8287c6c37761b1be3ad7c383b5c7fb714b12
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
people may use extra compilers which refer to CXXFLAGS & co., so set
them up "as normal".
Change-Id: I858ca63370a7aed66e04f5417da078b896feefc4
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Evaluate the .output variable of the extra compiler to determine
the file extension of its output.
The VS project generator needs it to determine the filter that
will contain the output file.
Change-Id: Iab1e154a712342401e17421c08975fad13967a5b
Task-number: QTBUG-45717
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
instead of allowing arbitrary input and output base paths, restrict them
to the project input and output dirs (in any permutation), which are the
only cases ever used anyway.
this permits much clearer call sites, and allows later optimizations.
Change-Id: I48d149a4417af5c858e66ec57c476a5bc6b17f17
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
explicitly use the correct directories instead of temporarily changing
into the output dir. this makes the code less obfuscated.
Change-Id: Ia935987f486151ae556910703cc20945c7610ffc
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
turns out that a relative path makes some versions of Xcode crash.
so use an absolute path again.
fileFixify() has been fixed for shadow builds to make this possible.
This reverts commit 6ccf0a326e.
Task-number: QTBUG-45424
Change-Id: Ica87c6c29f990f56e42c399b6d9b1c7eacdd13a7
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
... instead of sheepishly assuming qmake_pwd().
it also canonicalizes consistently with the relative output path now.
Change-Id: I86231f7259179020643405f3c0e696a74031aa4e
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
it would trigger only if the input file name was already absolute,
matched the native path separator, and some (likely) other conditions.
as this behavior was almost unpredictable, it would be not very useful.
so save ourselves the headache and just remove it.
Change-Id: Ic457f487f6d0ce9f7a5f192859c9efa9c2de2b63
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Make sure we don't pass by value, but by const reference.
Change-Id: Ia432e881d2b8116f22a30dfa31186479784ee4a1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
CESDKHandler now retrieves available WEC2013 SDKs from the registry and
assembles a working build environment.
Change-Id: Ifa70f53aca9d1bf2fadf178a331f46c1efca90ff
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
The qmake documentation was missing details about when rc files
are autogenerated under Windows.
A new section about windows rc files is added in
"Platform Notes".
Some hints are added in section VERSION.
Link to new "Platform Notes" section is added.
The VERSION example is extended, too.
Link to new "Platform Notes" section is added to RC_ICONS as
this is a rc file generator trigger, too.
The section "Building an Application" gets a link to the
"Platform Notes" and the system variable list was shortened
by all entries relevant to windows only rc files.
Many links to VERSION were not resolved by qdoc. Adds
explicit linkage.
Change-Id: Iacbc34d53a6bafa6e7658aaee8c751f32e978177
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Visual Studio copies all files to be deployed into the MSIL directory
and then invokes MDILXapCompile on it, which checks for managed code and
translates it into native code. The problem is that all entries of the
package will be copied into the MSIL directly, losing the subdirectory
structure (for instance for plugins). Hence we recreate the directory
structure manually by invoking windeployqt a second time.
Task-number: QTBUG-41753
Change-Id: I3d99cbc531bbe883f87b45de37ba71d93472c042
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
The msvc_nmake and msvc_vcproj generators deduced the exe/dll header
version number from the VERSION variable in a "bizarre" way:
VERSION=1.2.3.4567 was converted to /VERSION:1.234567.
But a minor number beyond 65535 is not accepted by the linker.
This fix deduces the major and minor from the major and minor of
VERSION: VERSION=1.2.3.4567 leads to /VERSION:1.2.
In addition, a new variable is introduced: VERSION_PE_HEADER.
With this variable, legacy pro files that rely on the bizarre
behavior can re-create it:
VERSION=1.2.3.45 and VERSION_PE_HEADER=1.2345 lead to the old
result: /VERSION:1.2345 by just taking the VERSION_PE_HEADER to
overrule the new behavior.
Task-number: QTBUG-44823
Change-Id: Ie093ade83290c098fe2b2a429ce5d6ed6dc750ea
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
QT_INSTALL_LIBS is not the right place to check for Qt dlls, as they
cannot be found there in a non-developer build. In order to be able
to find the dlls and make adding dll locations easier for the user,
QMAKE_DLLS_PATHS was added. On Windows, the variable points to Qt's
bin directory by default.
Task-number: QTBUG-44960
Change-Id: Ie4e5beeaadee798a055599387e842d7c0502c27a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Will be active when running test apps through Xcode's 'test' action,
and reports QtTestLib test objects and functions to Xcode as XCTest
cases.
This allows running tests on both iOS Simulator and iOS devices from
the command line, through xcodebuild, without relying on any 3rd party
tools. It also integrates Qt test failures and passes into the Xcode
IDE, which may be useful for closer investigation of test failures.
The feature is limited to Xcode 6.x.
Change-Id: I33d39edbabdbaebef48d2d0eb7e08a1ffb72c397
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Files in DISTFILES are placed into a "Distribution Files"
folder under the project node.
Task-number: QTBUG-43162
Change-Id: Ib75aacf1010d9ea63af89d4a9cc92275d714b3cb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
0c7241cc contains the wrong identifier for device capabilities. This has
been updated in a previous commit, but documentation was not properly
updated.
Task-number: QTBUG-45098
Change-Id: I300a2ea19ebdf8a1aaed492a1bdf24b9af2bd60a
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@theqtcompany.com>
Reviewed-by: Andrew Knight <qt@panimo.net>
17d690952b missed a few instances that should have showEnvVarsInLog = 0.
Change-Id: I8f1106426447670b0057aeb421efc09bf117e969
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
In de5553aa, qmake was fixed to resolve QMAKE_INFO_PLIST based on the
current pwd to fix QTBUG-21267. This fix was lost as part of 8c138054
in 5.4.
This fixes the error:
"WARNING: Could not resolve Info.plist ..."
when using qmake for shadow builds on OS X.
[ChangeLog][qmake][OS X/iOS] Fixed QMAKE_INFO_PLIST path resolution
for shadow builds
Change-Id: Icb42b2b3a44856f9b9a86a008081a3353951640d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
MSVC creates .lib file when ever dll with exports is built. Remove
this file too in distclean target.
Task-number: QTBUG-44685
Change-Id: I84ecb57626926b5bce06a200ff2b705fd2117686
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Xcode has a setting for script phases to filter out the environment
variables, so we don't need to use grep.
Change-Id: Ica1c64321385ab3e3b47cf6f8f4d4191bd963540
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@theqtcompany.com>
it makes no sense to let every spec do that separately, as it's fixed
by the generator+shell.
putting it into a file which is loaded regardless of the spec also
allows us to remove the hardcoded fallbacks from qmake.
if somebody overrode the values in their spec for some weird reasons,
they'll need to override spec_post.prf.
shell-{unix,win32}.conf are now dummies and print warnings.
Task-number: QTBUG-37269
Change-Id: I66c24fb4072ce4d63fdbfc57618daa2a48fa1d80
Reviewed-by: Jochen Seemann <seemann.jochen@gmail.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
A scheme is required to be able to run tests through Xcode, even from the
command line, but Xcode doesn't auto-generate the schemes until launched
as an application. Xcode also auto-generates schemes for all our targets,
but we only need one for the primary application target.
Change-Id: Ia42f3825aba3ffde3be93be55e165d6284434853
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
ecf6e34efefcedbff0a457ed4b5e0f4e5d096b37 introduced new values to
specify icons in the manifest.
Change-Id: I8f0cc9790ffd2f50ed2008bc8bab053b3db4965e
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@theqtcompany.com>
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
it doesn't make a whole lot of sense, but it's possible to create
braced blocks which have no semantic meaning.
Change-Id: Id55dfdee1aa3fade507cbd1eb34bdffcd7eb6bff
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
we now warn about the pointless ones, and error out in cases that
already were semantically bogus.
Change-Id: Ifd80014af0fc53e3cc42561c4270d1dca234568f
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
a colon after else/for is non-AND-ing, i.e., it's no logical operator,
but "punctuation". therefore, putting an operator into the token stream
is bogus. it didn't hurt execution, so it went unnoticed, but it still
wasted some bytes and cpu cycles.
Change-Id: If5578074257feed299bda1630bf0dfe72eb395ae
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
they come always in pairs (with one exception).
Change-Id: Ia2f69a8776bd7146ff2fb18d13cc6bb5b2c71139
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
they have been semi-warnings for a long enough time now.
Change-Id: I3fffd63f7b44b30d2dc18cdcd74221c10e98399d
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
without that, both the lines
cond1 { cond2: VAR = val }
and
cond1 { cond2: else: cond3 }
would yield two bogus errors: first an excess brace, and then a missing
one.
Change-Id: I8609106c1ad387577deec2077e2ce13507ac4d3f
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
we are transforming "magic" function calls into other structures. past
that point it's wrong to keep the function argument list terminator in
the token stream. this went unnoticed, because in this context it was
equivalent with the expected value list terminator (which was simply
never reached).
Change-Id: I3dc6719273ce9d663db867f355eba682ba6ccf2c
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
we strip the path a few lines above already.
Change-Id: If7524b8e744d2f1ab2f5a6920097d25671449829
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
it's easy when it is a simple list of files (or just absent). however,
it can also contain expandos, and in this case it's definitely not a
good idea to treat it partly (but not really) as a single shell command.
Change-Id: I7ef32a56f276b06579fc7094357c5f7612eaf205
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
first replaceExtraCompilerVariables(..., NoShell), then fix the final result.
Change-Id: If8cebeaa59f48d91b33b5a74e6a48a0d2d049643
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
it makes no sense to call it on paths that are fixified right before or
after, as fileFixify() calls it itself.
and verifyExtraCompiler() calls normalizePath() on its file argument.
Change-Id: I8fb21e129fd29428d1855de73483087842bc1bdd
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
in most cases, it actually means normalizePath() (because the file name is
used with qt i/o functions afterwards).
this affects QMakeLocalFile::local() as well, so many not immediately
obvious places are affected as well.
there was also one case of fixPathToTargetOS() falling into this category.
this is mostly a no-op, as the qt functions are agnostic to the path
separator.
in some other cases (in particular in the vcproj generator), it actually
means fixPathToTargetOS().
this is mostly a no-op as well, as the two functions are equal except on
msys anyway.
in the <meta file>FileName() functions, the use of a fixPath*() function
is bogus in the first place - fileFixify() already does
fixPathToTargetOS(), and this is correct when the file name is used
verbatim in a make command (which it is). otherwise it's irrelevant.
Change-Id: I26712da8f888c704f8b7f42dbe24c941b6ad031d
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
there is no reason why there should be unexpected leading or trailing
whitespace in an extra compiler's .depends list.
Change-Id: I46be75063180131e135fc6eea0238a482073618a
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
instead of quoting more or less random variable contents early,
consistently quote everything only right before it is needed. this way
we can be sure that everything is correctly quoted, but not over-quoted.
this removed the need for the insanity that unescapeFilePath() and
similar ad-hoc contraptions were.
this had the somewhat counter-intuitive effect that it was possible to
remove escapeFilePath() calls from PBX::writeSettings() calls - these
were actually only unescaping.
[ChangeLog][qmake][Important Behavior Changes] A lot of quoting issues
have been fixed. As a side effect, qmake has become more sensitive to
over-quoted file names in project files.
(*) ok, maybe not. close enough.
Task-number: fatal: out of memory
Change-Id: I8c51cfffb59ccd156b46bd5c56754c480667443a
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
fixing and escaping is now a tri-state option:
- none (this removes the need to unescape the result right afterwards in
some cases)
- local shell (for system())
- target shell (for Makefile)
Change-Id: I5b78d9b70630fe4484dc964eff5f62793da35764
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Use of FileFixifyAbsolute with non-default in_dir and out_dir
is not defined (and produces bogus results).
Using FileFixifyRelative when handling QMAKE_BUNDLE_DATA as a relative
path is fine.
Change-Id: I49902dc9f5b8029d092a4419c0cff5483e419c30
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Change-Id: I503e4e4c50a147cc1d81019228593f502132f28a
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Commit 8ee2e497 introduced a regression for CONFIG-=flat vcxproj files.
Files with custom build steps (e.g. foo.h with Q_OBJECT) were written
into top-level filters ("Header Files" instead of
"Header Files\my\sub\dir").
The assumption that the parameter filtername always equals
VCFilter::name was wrong.
Change-Id: Id5178550310d06b73e42f18597a27012ddd89bb7
Task-number: QTBUG-44413
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
We already have saved this information in the loop above.
Change-Id: Ic0e0a66b01e9ee001932d7d798d848abc746ef95
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Commit 4f21eb03 broke the generation of non-flat vcxprojs.
XTreeNode passes filter names to outputFileConfigs that have
the source subdirectory suffixed (e.g. "Generated Files\subdir").
Function filterByName must be called with the substring before the
backslash.
Change-Id: Ic259e6316ab0727828773b13e0d8ad0cc7f0808f
Task-number: QTBUG-41746
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
This reverts commit e5a8134765.
A much simpler fix for QTBUG-41746 is about to follow.
Change-Id: I1eea1785e00b4d7d470108d8dc3272a2af438ef4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The VS integration does not exist anymore and has been replaced by
the Qt VS Add-in years ago.
Change-Id: I0202b0b2909318ed8869a738ec87b507c4c746af
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@theqtcompany.com>
Qt copyrights are now in The Qt Company, so we could update the source
code headers accordingly. In the same go we should also fix the links to
point to qt.io.
Outdated header.LGPL removed (use header.LGPL21 instead)
Old header.LGPL3 renamed to header.LGPL3-COMM to match actual licensing
combination. New header.LGPL-COMM taken in the use file which were
using old header.LGPL3 (src/plugins/platforms/android/extract.cpp)
Added new header.LGPL3 containing Commercial + LGPLv3 + GPLv2 license
combination
Change-Id: I6f49b819a8a20cc4f88b794a8f6726d975e8ffbe
Reviewed-by: Matti Paaso <matti.paaso@theqtcompany.com>
qmake seems to be adding current date/time to the .la files for no
reason, so let's stop do that.
This way, two invocations of qmake actually gives bit for bit similar
output of .la files.
Change-Id: I93c7c4075cc1e05214849eec8629f41ce01e5914
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
these reflect the on-target paths (unlike /raw, which are host paths, just
without the -sysroot). this is necessary for anything deployment-related,
starting with RPATH.
Change-Id: I13d598995d0e4d6cb0dc1fc7938b8631cf3e3a95
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
it makes no sense to test for OBJECTS_DIR emptiness when we are going to
use DESTDIR instead.
Change-Id: I0f7115fc8a9fe2a996417d5f50bd0165773129fa
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
that makes no sense at all. and OBJECTS_DIR is not resolved, either.
Change-Id: Ie76b9de6bb11ae42945255f2e168943066d2f60d
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
... as newer versions of nmake (and jom, for compatibility) have botched
circumflex processing (they simply don't do it when shortcutting the shell
evaluation).
as a side effect, the output is also more readable if the string contains
quotes.
Change-Id: I0506b59ceecb70da258c482f9973156b2803066d
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
double quotes cause mingw32-make to switch from direct execution to going
through the shell, so avoid them.
Change-Id: I05b71a050e425a1b327f747fab01755ff528ba0b
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
MakefileGenerator::init() fixifies the variable, so there is no point in
the windows generator adjusting path separators as well.
Change-Id: I9331631125ee16ce4d64e38153f3c67f2f78b16b
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
this is admittedly a rather improbable use case, so unlikely to have any
real world effect.
Change-Id: If98f0de90043525f0555f8ddf98f8b4352e5a0a7
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
it always returned true nowadays.
an obvious followup effect is that the return value of parsedProBlock()
doesn't need to be null-checked any more as well.
Change-Id: I782785cab9b721a78a342a010921a73e642ebe7f
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
... because it also fixes the path, and we'll need the "plain" name later.
Change-Id: I86da8f53e44a68005c413c4b78b1b1682746e22e
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
we (supposedly) fully support QMAKE_EXTRA_COMPILERS, so there is no need
for any special casing here.
Change-Id: I4e9d389320a3e5ad0acbf73823ff1e6f7b9c370f
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
it's debugging code which is used only once (if even uncommented).
Change-Id: Ie57347017dd24f4acecff2a7132f82898dea3122
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
more efficient use of string functions.
Change-Id: I3d95d6379eaab025b18449b706f93631a2132aad
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
the path is processed, and afterwards fixForOutput()ed again. the first
call makes no sense (even if it registered some variables that are gone
in the second call, that would be pointless exactly because they are gone).
Change-Id: I251f1e4858bec36f3a7a9427c2ba78031b35a2d3
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
commands come already fully expanded and quoted from the project.
Change-Id: I239d5c305f5f65d32c832bc09bfd1c322051e149
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
no other generator does it. if it actually buys anything, it should be
re-instantiated differently.
Change-Id: I8431702ac7d558d65fd28a7f9e36bb49db2eb253
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
the logic was such that if the bundle name already had the specified
extension which was not the default extension, the default extension
would be appended, too. i don't think that was the intention ...
now we simply put the default into QMAKE_BUNDLE_EXTENSION if its empty -
the variable is not used anywhere else where it would be expected to
preserve its emptiness, so this is safe.
Change-Id: Ied34d10f9fe60756bddc0037dcb2f1d3bbfd3e12
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
there is no reference to it anywhere.
Change-Id: I72403be6c8294d9b2e64075ebd428eba24d97097
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
this isn't some fuzzy logic, the call sequence is well determined.
Change-Id: I1696b49ed687da83d2969efcfe23ac6565630020
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
it never left the rudimentary stage. should it ever be re-added, it
needs to be done basically from scratch anyway.
Change-Id: I76858c8a2c90235f228f7a6e5a178a10a2669d37
Reviewed-by: Rolland Dudemaine <rolland@ghs.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Use x86 for a 32 bit build of qmake and x86_64 for 64 bit.
This is needed for shells that do not set VCINSTALLDIR.
Change-Id: I0843c1a590161669530b99f45ab59d523e6596c3
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
When there are source files with the same file name in different
directories of the project, then nmake's inference rules might pick up
the wrong source file. Note that this even happens when only one of those
files is in SOURCES. The existence of conflicting file names is enough
to cause hard-to-find build failures.
The usual work-around for this situation is CONFIG+=no_batch.
This is now done automatically when a conflict situation is detected and
a warning message is printed.
Task-number: QTBUG-13496
Change-Id: Icd81027407d3d489dbc50231e5ed8bcb91f8d2bc
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
When using the cross-compiler toolchain for 32 bit on a 64 bit machine,
qmake generated a 64 bit VS project.
This was because qmake didn't know about the amd64_x86 cross-compiler,
and qmake did not use the first MSVC bin directory it found in PATH.
Task-number: QTBUG-43457
Change-Id: I50c6f7bb9afe44a58321c670d680dbcc7cd07223
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
In ancient times, the existence of QMAKE_RUN_CXX_IMP determined the
use of implicit rules. The code path for implicit rules was turned
off in 2006 (0287fe3c), which probably was a refactoring artifact.
Later, implicit rules were enabled again using a different approach.
These days, the non-existence of QMAKE_RUN_CXX determines the use of
implicit rules.
We remove the dead code path now and rely on the latter condition.
One part of the dead code is a feature that turns off inference rules if
the OBJECTS_DIR is set or source file names do not match expectations.
If somebody ever missed this, it has been reimplemented otherwise.
Or not.
Change-Id: If3ce9904d9c1df6e4048c58c2452854cce7fa206
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Instead of trying to load in ltcg.prf and cache the value.
Change-Id: If485ff68fc6ff9d9cf7009cd72d5e702d0199c7f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This just reindents and makes it easier to read what's going on.
Change-Id: Id0afcdfb8f468b4553bba8c5a572a1d0115b0886
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
instead of having each generator do its own magic (little surprisingly,
with different outcomes), add "stuff" to the search path in one place
used by all generators. this has several consequences:
- (unless disabled via CONFIG+=no_include_pwd) $$PWD is now consistently
prepended by all generators. most notably, this was entirely missing
from the MSVC generators (both nmake and VS) - despite them needing it
most. this also affects Xcode projects.
- $$OUT_PWD (if different from $$PWD) is now added right after $$PWD,
not at the end. this precedence clarification only makes sense, given
that qmake tries to make shadow builds as transparent as possible.
- the qmakespec's dir is now consistently appended. the UNIX and PBX
generators prepended it, while the rest already appended. few files
actually include qplatformdefs.h, so having it late in the search path
seems reasonable.
- the effect of CONFIG+=depend_includepath is now fully consistent with
the actual include path.
Change-Id: I5f7570183351ade29342ea74fef706a0738842bf
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
neither qmake_getpwd()'s return value nor a fileFixify()'d version of it
can be empty.
Change-Id: Ic3b7d20becc57209b9dbe71ad9dc8e7547d435b1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is not used or referenced anywhere
Change-Id: I02e1aa76631627f64e5d1f9b36a13cdb5677e93f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
These mkspecs are not supported and no longer compile. Related support in
qmake has also been removed.
Change-Id: I7706dcfa5471e55e2ae3d580d65e9371e2c652d5
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Tested with the Preview release of November 2014.
Differences to the 2013 detection and support:
- Option -Zc:strictStrings is present in both debug and release mode
and is passed to qmake's own build
- New warnings 4456, 4457 and 4458 (shadowing) are disabled
- Compiler supports -arch:AVX2
Change-Id: I9572ff4d4aded4004c1fa5d6f13ffee5462043d6
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
On Windows, the application manifest file can be linked with the
executable, to specify for example the requested privileges of the
application. On MSVC nmake, the manifest is already handled in
NmakeMakefileGenerator::writeBuildRulesPart, but it is not compatible
with MinGW. On MinGW, this manifest file has to be referenced in the
Rc File. This patch simply handles the existing variable
"QMAKE_MANIFEST" which defines the appropriate line RT_MANIFEST in
the RC file.
Task-number: QTBUG-42454
Change-Id: I921606e002ffe3801c537f30ac2365891f97d5c9
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Running 'make distclean' should remove all files generated by qmake,
including .qmake.stash/super. These files are considered owned by
a particular project (and hence a candidate for distclean), if it
lives in the same directory as the output dir of the project.
Task-number: QTBUG-42678
Change-Id: I224e9bac039eeacb6561e18acc7f8e867da5dab8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
We don't need to modify ResourceOutputFileName. The default is fine,
and $(InputName) evaluates to nothing in VS >= 2010.
Change-Id: Ib203d36261e1b5449c5a139b1950bd0d66197297
Task-number: QTBUG-43026
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
This fixes a regression introduced by
04d3a89e20 as it left out the custom build
step for the source code file generated for PCH.
Task-number: QTBUG-42596
Change-Id: I53d5a36b842dcffbde2657910e6a96dca0e99c7b
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
With multi-architecture builds and ONLY_ACTIVE_ARCH set to NO, Xcode will
build the final target for multiple architectures at the same time, but
CURRENT_ARCH will only match one of them, so we failed to set up the
right dependencies for our pre-link step, causing the step to happen
after linking in some cases.
We now build an exhaustive dependency list based on QMAKE_XCODE_ARCHS,
so that ONLY_ACTIVE_ARCH=NO can be used for release builds targeted at
the App Store.
Change-Id: I6702f020a6970807adc624779f6dde09be62beb9
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Refactor the current app CFBundleIdentifier support:
handle frameworks as well. Add @BUNDLEIDENTIFIER@
placeholder to the OS X info.plist.lib templates.
This means the Qt frameworks will now get a valid
CFBundleIdentifier entry the same way as app bundles:
by extracting the identifier prefix from Xcode settings
and appending framework name.
Task-number: QTBUG-32896
Change-Id: Ica8f28332a88e37a823c46fca7a2c373157af020
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Since commmit 0127962e47 the
PBXResourcesBuildPhase is used only for ICONS, because the old
behavior of using it when target path is not given differed from
the documentation and behavior of the makefile generator by using
Contents/Resources as target directory when targeting osx.
The PBXResouceBuildPhase optimizes png, compiles xib or asset catalogs
and copies the rest.
The advantage is that it makes it easy to add resources to the bundle,
the only problem is that the target directory is always the resource
directory.
The copy operation currently used does not compile resources, which
makes adding .xib (for the Launch File required to support iphone 6)
and asset catalogs difficult.
So we restore the old 5.3 behavior for ios, and use the build
resources phase when possible on osx (target Contents/Resources).
On osx this still implies a difference between the makefile
generator and the xcode generator: only the latter compiles resources.
Change-Id: Id1853693e88fc46562b044efdea2bf5f9da2c98c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
The settings of the librarian were never written.
Creation of static libraries only worked by accident.
Adapted the code from the vcproj code path.
Task-number: QTBUG-30712
Change-Id: I69917f44305eb458647392d222db477fe5a5b7c8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Second attempt. MSVCPROJ_TARGET contains the resolved target name,
including version number and target extension.
We're splitting this value into PrimaryOutput and
PrimaryOutputExtension.
PrimaryOutputExtension is only written if it contains a non-default
value.
Task-number: QTBUG-26782
Change-Id: I4b828dc5dd47322f653585aee1a5767f0cf8bd48
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
