Instead of sending one @-separated message, send one CBOR message. The
message structure is, using the CBOR Data Definition Language:
broadcast = [
username: tstr,
port: 0..65535
]
Change-Id: Ic38ec929fc3f4bb795dafffd150ac2614d18c6bf
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This complements the previous commit, which changed the broadcast
datagram to CBOR. This commit changes the TCP protocol too. The protocol
is an infinite array of commands, each of which is a map from an integer
(the DataType enum) to either a string or null.
The entire state machine for the connection is rewritten, relying on
QCborStreamReader's ability to deal with incomplete data.
Change-Id: Ic38ec929fc3f4bb795dafffd150ac674c32fac87
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
We move QInternalMimeData to a separate file, because this class is
used, even if draganddrop is disabled. From now on, include
qinternalmimedata_p.h instead of qdnd_p.h for QInternalMimeData.
Change-Id: I594e08e2e90d574dc445119091686b4b69e4731b
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Since we bind to QHostAddress::Any, the incoming packets are actually
IPv4-mapped IPv6 addresses and the operator== strict comparison was
failing. Instead, use isEqual(), which defaults to TolerantComparison.
Change-Id: Ic38ec929fc3f4bb795dafffd150ac6b3a0a7e3b2
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Compiling the default examples should be possible without compile errors.
Task-number: QTBUG-53141
Change-Id: I73d8787241291ae6230861a89b38e91d900fede0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Compiling the default examples should be possible without compile errors.
Task-number: QTBUG-46857
Change-Id: Ie323798df09cdbebc67eb617a7e0ec4c66cb2357
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
It's the right thing to do, as we're in 2017, not 1997. Also, this takes
care to indicate that QAbstractSocket::MulticastTtlOption makes sense
mostly for IPv4, even though it's implemented for both families. In
IPv4, it's used to indicatae the scope, whereas in IPv6 it's stored in
bits 12-15 of the address.
Task-number: QTBUG-46046
Change-Id: I9741f017961b410c910dfffd14ffaabe0a2024d8
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
QFontMetrics(F)::width() has been deprecated and is replaced by
horizontalAdvance(). This updates all usage of it in tests and
documentation.
It is worth noting that many or most of the usages of
QFontMetrics::width() probably intended to use boundingRect().width(),
but since it currently works, I have not looked into that, just
replaced the function name mechanically.
Change-Id: Iec382e5bad0b50f37a6cfff841bfb46ed4d4555f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The vast majority is actually switched to QRandomGenerator::bounded(),
which gives a mostly uniform distribution over the [0, bound)
range. There are very few floating point cases left, as many of those
that did use floating point did not need to, after all. (I did leave
some that were too ugly for me to understand)
This commit also found a couple of calls to rand() instead of qrand().
This commit does not include changes to SSL code that continues to use
qrand() (job for someone else):
src/network/ssl/qsslkey_qt.cpp
src/network/ssl/qsslsocket_mac.cpp
tests/auto/network/ssl/qsslsocket/tst_qsslsocket.cpp
Change-Id: Icd0e0d4b27cb4e5eb892fffd14b5285d43f4afbf
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
It's the one that is more complex - with a text-based 'progress-bar'
and queueing (for some, probably educational, reason) of requests.
Changes:
- update the C++ syntax (mem-initializers, range for, etc.)
- new-style headers
- redirects should not result in creating an empty file. Since we
have no UI, and this example is already complex enough, settle
for just reporting the redirect and removing the empty file.
Task-number: QTBUG-60628
Change-Id: I0b69cd77414ecac7c0bc6b2f8f787befc978de28
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Mainly 'modernizing' - use <c...> c-library includes (<stdio.h> -> <cstdio>),
add appropriate using directive; minor fixes in formatting + removal of a
hated double negation (aka ifndef QT_NO_NOTHING). Also, as our rules
('how to write examples') suggest - replace too many inclusion directives
with module-level headers. Basic redirects handling - do not create empty files
for redirected requests (or even files with some useless html).
Task-number: QTBUG-60628
Change-Id: Ia4398d39126313e6213bc7244d11a55958e64dec
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Unlike client, this needs a bit more changes:
- remove redundant (and outdated) stdlib.h includes
- use QRandomGenerator (instead of qsrand/qrand pair)
- replace QStringList with QVector<QString>
- Q_NULLPTR->nullptr, ExplicitType * -> auto
- fix some weird indentation
Task-number: QTBUG-60628
Change-Id: I12eed12711b1e622407bd8ecd1afdf56a2cf2097
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
... as soon as we updated multicastsender. Changes are minimal and mostly
cosmetic - use 'explcit' and 'nullptr' where appropriate, make a socket
data-member and not a pointer, move the 'datagram's declaration outside
of a loop.
Task-number: QTBUG-60628
Change-Id: Icfa46e6d2844c40a605f2f4066847594943a8ea8
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
... as soon as we updated the 'sender' example. Changes are purely cosmetic
though - 'explicit', nullptrs and local variables instead of redundant
data-members (QPushButton).
Task-number: QTBUG-60628
Change-Id: I572219da9d2a0ced07d94efb6f52f00b5a9c546d
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Similar to broadcast sender:
- where possible use local variables instead of data-members
- where possible avoid heap-allocated objects, use sub-objects instead
- change signal-slot connection syntax (and as a "bonus" - show our QOverload)
Task-number: QTBUG-60628
Change-Id: I8cd4f888c1d0653bdc8591800e713bbd347ad2fb
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This patch contains:
- some cosmetic changes to make example look more like
modern C++;
- UI initialization code and SSL signals handling were split
into separate member-functions;
- useless checks 'if (socket)' were deleted;
- widget's minimum size is now fixed + font size
in 'CertInfo' dialog increased to make it readable.
Change-Id: I7aadb78896832a989494d280d6da0635045f948c
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
It was already revamped a fair bit 2 years ago
Replaced Q_NULLPTR with nullptr.
Added a minimum size to the progressbar dialog.
Update the label if a redirect is rejected.
Improve the overwrite dialog message.
Replaced the documentation image.
Task-number: QTBUG-60628
Change-Id: I0fb70d90e1d6ca84a8307bd6ea4ea1ce220feeaf
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Fix copyrights, update signal-slot connection syntax, use some simple
C++11 features (member-initializers, 'auto'), delete some data-members
(where a local variable is enough), where possible - use data-memebrs
as sub-objects (instead of heap allocated).
Task-number: QTBUG-60628
Change-Id: Ia440d8471eafb47481c0d010175c907037bae841
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Remaining uses of Q_NULLPTR are in:
src/corelib/global/qcompilerdetection.h
(definition and documentation of Q_NULLPTR)
tests/manual/qcursor/qcursorhighdpi/main.cpp
(a test executable compilable both under Qt4 and Qt5)
Change-Id: If6b074d91486e9b784138f4514f5c6d072acda9a
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Remaining uses of Q_DECL_OVERRIDE are in:
src/corelib/global/qcompilerdetection.h
src/corelib/global/qglobal.cpp
doc/global/qt-cpp-defines.qdocconf
(definition and documentation of Q_DECL_OVERRIDE)
tests/manual/qcursor/qcursorhighdpi/main.cpp
(a test executable compilable both under Qt4 and Qt5)
Change-Id: Ib9b05d829add69e98a86238274b6a1fcb19b49ba
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Found by GCC 7.
Change-Id: I90267617a038558e5b5213c598a949baf8d4d9be
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
don't attempt to hand-craft a library export any more. instead, use the
configure system's built-in mechanism, and refer to it via QMAKE_USE.
this also allows us to rely on transitive dependencies in the autotest.
as a side effect, this makes the openssl-linked feature imply the
openssl one.
Change-Id: I5dd209b63bc8fbbc62852f6ffc472d4452ea2e68
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Update the network-chat example to use the new QRegularExpression class
in place of the deprecated QRegExp.
Change-Id: Idcd3dc5b3e9b520b2eeef9565d50195cc8dffd06
Reviewed-by: Sze Howe Koh <szehowe.koh@gmail.com>
We can use QOverload since Qt 5.7 (it depends on Q_COMPILER_VARIADIC_TEMPLATES
which is required since Qt 5.7).
Use it in the examples to show the best practice.
qOverload currently can't be used because it requires c++14.
Change-Id: I94a3c0db9d551fe169fa3d19c07ec0b329d5946c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
This removes an unnecessary dependency on QProcess, which allows
the example to work on platforms where process support is not
available (such as iOS and tvOS).
Change-Id: I5d75fe8373b5f8c3744ab8fb3b1fd1b37eea35f5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... to the new qmake based configuration system.
This removes the old qfeatures.txt (distributed over configure.json
files) and qfeatures.h (distributed over qconfig-<module>.h files).
qfeatures.prf is gone without replacement, as attempts to use it would
lead to followup errors anyway.
Change-Id: I1598de19db937082283a905b9592d3849d2199d0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Move the different parts of configure.json/.pri into the libraries where
they belong.
Gui is not yet fully modularized, and contains many things related to
the different QPA plugins.
Done-with: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Change-Id: I6659bb29354ed1f36b95b8c69e7fce58f642053f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Use the new qtConfig macro in all pro/pri files.
This required adding some feature entries, and adding
{private,public}Feature to every referenced already existing entry.
Change-Id: I164214dad1154df6ad84e86d99ed14994ef97cf4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
- Introduce a common header file for client and server;
- Update license headers;
- Fix minor issues.
Change-Id: I3fc42fd5ba32141c702fc6679a27bf0b6a16fd26
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Conflicts:
qmake/library/qmakebuiltins.cpp
qmake/library/qmakeevaluator.cpp
qmake/library/qmakeevaluator.h
qmake/project.h
QMakeEvaluator:
* evaluateConditional(): one side changed return type, the other
changed a parameter type.
* split_value_list(): one side changed a parameter adjacent to where ...
* expandVariableReferences(): ... the other killed one overload and
changed the survivor
src/corelib/io/qlockfile_unix.cpp
One side changed a #if condition, the other moved NETBSD's part of
what it controlled.
src/corelib/tools/qdatetime.cpp
One side fixed a reachable Q_UNREACHABLE in toMSecsSinceEpoch(), the
other moved it from the private class to the public one, in the midst
of the "short date-time" optimization, which confused diff entirely.
One side changed a QStringLiteral to QLatin1String, the other rewrote
adjoining code.
src/network/kernel/qauthenticator.cpp
Both rewrote a line, equivalently; kept the dev version.
src/platformsupport/fontdatabases/mac/qfontengine_coretext.mm
src/platformsupport/fontdatabases/mac/qfontengine_coretext_p.h
One side changed #if-ery that the other removed.
tools/configure/configureapp.cpp
One side added a check to -target parsing; the other killed -target.
tests/auto/testlib/selftests/expected_cmptest.lightxml
tests/auto/testlib/selftests/expected_cmptest.teamcity
tests/auto/testlib/selftests/expected_cmptest.txt
tests/auto/testlib/selftests/expected_cmptest.xml
tests/auto/testlib/selftests/expected_cmptest.xunitxml
Regenerated using generate_expected_output.py
I note that quite a few other expected_* come out changed, now.
There was no git-conflict in
src/widgets/kernel/qformlayout.cpp
but it didn't compile; one side removed some unused methods; the other
found uses for one of them. Put FixedColumnMatrix<>::removeRow(int)
back for its new user.
Change-Id: I8cc2a71add48c0a848e13cfc47b5a7754e8ca584
Move those to the equivalent {to,set,from}SecsSinceEpoch(), except for
the cases that did QDateTime::currentDateTime{,Utc}().toTime_t. Those
are best implemented with QDateTime::currentSecsSinceEpoch().
Change-Id: Ib57b52598e2f452985e9fffd145a366c92cfda20
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
(QT_VERSION % 0xffff00) is useless for now, as QT_VERSION < 0x1000000
(for now). The author of this code probably meant to use bitwise-AND.
But even that is unnecessary as the right shift discards the lower 8
bits anyway.
Change-Id: Ie585843cfb684bc3b6e3fffd145d533b05288dfc
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Examples should demonstrate best practice, and we can use the keyword
directly nowadays.
Change-Id: I1f122e5caceca17290757ffbaf3d660e7daa9ae4
Reviewed-by: Topi Reiniö <topi.reinio@theqtcompany.com>
DownloadLocation is not writable on some platforms (iOS) in Qt 5.6,
and qt-project.org HTTPS does not work anymore.
Change-Id: I78bfbee1472cd39cd05ec7f846d1195d4fbb1b2c
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Remove #ifdef sections for Q_OS_WINCE and wince .pro file clauses in library,
examples and tests.
Task-number: QTBUG-51673
Change-Id: I3706336395620522ceda414d7437295d9ec64f16
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Update files using old header.LGPL3 to header.LGPL
Update files using old FDL template to use new one
Update files using old BSD template to use new one
Change-Id: I36a78272516f9953d02956522f285b40adfc8915
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
QUrl::setScheme() parses and canonicalises the scheme, so that
scheme() always returns a lower-case string anyway; no need to
.toLower() it.
Change-Id: Ied00814b63f159386a42552dcf06346ee56f9f97
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
This adds a way to resume reading from a stream after a ReadPastEnd error.
This is done by introducing a stream read transaction mechanism that keeps
read data in an internal buffer and rolls it back on failure.
[ChangeLog][QtCore] Added QDataStream startTransaction(),
commitTransaction(), rollbackTransaction(), abortTransaction()
functions to support read transactions.
Task-number: QTBUG-44418
Change-Id: Ibf946e1939a5573c4182fea7e26608947218c2d9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Use the new API QStyleHints::showIsMaximized().
Change-Id: I1342b3c29ef4ccfcf635a32d403f9aa7ce0cb4e4
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
- Remove Qt::WindowContextHelpButtonHint.
- Make the server label interactive (enable copy).
- Introduce new connection syntax.
- Remove unneeded member variables.
- Use constructor initialization where appropriate.
- Adapt the layout to fullscreen platforms by wrapping it
into a QGroupBox.
Change-Id: I6e397ad082f22ba1e99fc5a17440b2be1f9584f6
Reviewed-by: Topi Reiniö <topi.reinio@theqtcompany.com>
- Remove unneeded member variables.
- Use new connection syntax.
- Streamline code.
- Add a QCheckBox for launching the file after download
and make the default file name and download directory configureable.
- Make status messages more verbose.
- Set Password echo mode on authentication dialog.
- Extract the progress dialog to a separate class
that is directly connected to the QNetworkReply, which
is created on demand. Set set minimum and duration on it.
This fixes a crash that currently occurs when clicking "Abort"
on the SSL error dialog and "Cancel" on the progress dialog that is
then re-shown due to its internal force timer/minimum duration handling.
- Resize according to screen size.
Task-number: QTBUG-48332
Change-Id: Ia2611e63fe96d6f49e4cdd06049a206ddb2c2864
Reviewed-by: David Faure <david.faure@kdab.com>
Some of the examples make no sense without bearer management and
QNetworkSession is not defined if QT_NO_BEARERMANAGEMENT, so
tst_qnetworkreply.cpp has to be adjusted.
Change-Id: Ic2f73746cba74f670ae5b5e99b0be1461ff6d182
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
The torrent example does not have its own code to work with SHA-1,
it uses QCryptographicHash instead.
Change-Id: Ided0e3dcded1096feb3366682c97530c4cec0a14
Reviewed-by: Lisandro Damián Nicanor Pérez Meyer <perezmeyer@gmail.com>
Reviewed-by: Sami Makkonen <sami.makkonen@digia.com>
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
The Google Suggest API doesn't return the 'num_queries'
anymore. Had to remove code related to 'num_queries' entry
so that the suggestion list shows up.
Task-number: QTBUG-42817
Change-Id: Ic918d1c86840fa4c1e18f32a984f5a9dd911261d
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Not that many, if any, uses of sprintf here were idiomatic Qt,
but that's for another commit.
Change-Id: Ic34470d9799942f786770ba9541b29c34d67c6f8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Qt copyrights are now in The Qt Company, so we could update the source
code headers accordingly. In the same go we should also fix the links to
point to qt.io.
Outdated header.LGPL removed (use header.LGPL21 instead)
Old header.LGPL3 renamed to header.LGPL3-COMM to match actual licensing
combination. New header.LGPL-COMM taken in the use file which were
using old header.LGPL3 (src/plugins/platforms/android/extract.cpp)
Added new header.LGPL3 containing Commercial + LGPLv3 + GPLv2 license
combination
Change-Id: I6f49b819a8a20cc4f88b794a8f6726d975e8ffbe
Reviewed-by: Matti Paaso <matti.paaso@theqtcompany.com>
Change-Id: I6b551de331aa0386ea53d8e96f50b669777d2d69
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
If the list of configurations takes time in the backend,
the defaultConfiguration will be invalid at this time, but will
be updated by the backend.
Change-Id: I2886a8f6c569c993814172ccaa46e4bb5ba5e0d6
Reviewed-by: Alex Blasche <alexander.blasche@digia.com>
So far the example didn't show any errors when the connection to the
server couldn't be established (e.g. because the host/port number was
wrong, but also because the SSL handshake already failed).
The fix shows a modal error dialog in this case.
Change-Id: Ia517bf79c5fb2ccdb1edabded28f86759f3e6dcf
Reviewed-by: Richard J. Moore <rich@kde.org>
Q_DECL_OVERRIDE (which expands to 'override' for supported compiler)
helps to declare the intent (that it is an overridden function) and
force compilation error when there is no such virtual function in the
base class.
The examples should show the best practice of having it, as it may save
the programmer quite some time in case of change of API or typo in the
function name or arguments.
This change was done automatically with
clang-modernize -add-override -override-macros
And fixed MSVC compilation by removing inline for TorrentViewDelegate::paint
Change-Id: Ice66ae93fae571266f908703d5b8892b2c1ebb1a
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Show how use QCommandLineParser with additional
parameter checking for custom options and positional
arguments.
Also explain how to display help in GUI applications.
Change-Id: I03513e09b7dd5b150259593da0af2ef2a281cab2
Reviewed-by: David Faure <david.faure@kdab.com>
the diff -w for this commit is empty.
Started-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I77bb84e71c63ce75e0709e5b94bee18e3ce6ab9e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Updated dnslookup example to take an optional nameserver argument
for doing DNS lookup against a specific nameserver.
Task-number: QTBUG-30166
Change-Id: I9f46f9f766b56f770d2c8372e3bfad5c71023c73
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The Qt Simulator is no longer supported with Qt 5.
Change-Id: I0f98351d482dd0554ea0754746d56f94ee6bf22f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
WinRT doesn't support QProcess, so the network-chat example shouldn't be
built there.
Change-Id: I7885a992d3b8baffd5530c694063140535240f07
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Modularized example paths are defined in module-specific .qdocconf
files. This change fixes \example command for a number of examples to
be relative to those paths. This way, the manifest files will have a
correct project path for each example.
Change-Id: I6d3dba34a1eb04a2bc294520102e232ccd0f0ba2
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
This change fixes two issues in the torrent example:
- Correctly use a query constructed from the announce url to fetch
the list of peers (using QUrlQuery).
- Reimplement QAbstractSocket's connectToHost() and
disconnectFromHost() which are virtual in Qt 5, instead of
of using the protected connectToHostImplementation() /
disconnectFromHostImplementation() slots.
Also removes a warning about deprecation of QHttp class as it's no
longer used in this example.
Task-number: QTBUG-30329
Change-Id: I9230cd2204bfc1a66f2ea3e98940b09681df250e
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Remove all trailing whitespace from the following list of files:
*.cpp *.h *.conf *.qdoc *.pro *.pri *.mm *.rc *.pl *.qps *.xpm *.txt *README
excluding 3rdparty, test-data and auto generated code.
Note A): the only non 3rdparty c++-files that still
have trailing whitespace after this change are:
* src/corelib/codecs/cp949codetbl_p.h
* src/corelib/codecs/qjpunicode.cpp
* src/corelib/codecs/qbig5codec.cpp
* src/corelib/xml/qxmlstream_p.h
* src/tools/qdoc/qmlparser/qqmljsgrammar.cpp
* src/tools/uic/ui4.cpp
* tests/auto/other/qtokenautomaton/tokenizers/*
* tests/benchmarks/corelib/tools/qstring/data.cpp
* util/lexgen/tokenizer.cpp
Note B): in about 30 files some overlapping 'leading tab' and
'TAB character in non-leading whitespace' issues have been fixed
to make the sanity bot happy. Plus some general ws-fixes here
and there as asked for during review.
Change-Id: Ia713113c34d82442d6ce4d93d8b1cf545075d11d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
this is much more elegant than the so far propagated !isEmpty(QT.foo.name).
also replace feature-specific tests (no-gui and no-widgets) and the
obsolete contains(QT_CONFIG, foo) syntax.
Change-Id: Ia4b3c8febcabf9eeca67b1f9173a523820b1038b
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Reviewed-by: Tasuku Suzuki <stasuku@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
