Commit 21d3916817 added the 64-bit
version, so qsizetype now works cross-platform. The casts were added to
make qtbase compile on commit df853fed66.
Change-Id: I26b8286f61534f88b649fffd166c409c5c232230
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
- Fix the save as file dialog being in "Open" mode by setting
acceptMode
- Fix clazy warnings about detaching QList by using constFirst()
- Fix clazy warning about passing a context to slot connection
Pick-to: 6.0 6.1 5.15
Change-Id: I0c800e9829e118fcec477322aa2a13660e3b51d2
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
The ui_XXX.h include did not match the location of the XXX.ui file, and
AUTOUIC failed with
"SRC:/addtorrentdialog.h"
includes the uic file "ui_addtorrentform.h",
but the user interface file "addtorrentform.ui"
could not be found in the following directories
"SRC:"
While this could be fixed by adjusting the include paths properly, this
would complicate the CMake project file, and we're dealing with an
example where needless complexity would cloud comprehensibility.
Move the .ui file next to corresponding source files instead.
This removes the need for any special cases in CMakeLists.txt, and we
can remove .prev_CMakeLists.txt.
Fixes: QTBUG-87457
Pick-to: 6.1
Change-Id: Ic2dec5ded7100e22d5afc571efc4b009bc62e41c
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
They cannot be built due to QTBUG-91033.
Task-number: QTBUG-91033
Fixes: QTBUG-88758
Pick-to: 5.15
Change-Id: I6f75cac1b20208c7813addd1ebe578c9edae295a
Reviewed-by: Christian Stenger <christian.stenger@qt.io>
Per the discussion of QTBUG-88831, we determined that module-wide
imports are unfortunate, especially for compile times. Following this,
all QtDBus includes have been replaced with the headers for the classes
actually used in each file. Additionally, some cleanup of header file
order and format has been performed in the changed files.
Pick-to: 6.0
Change-Id: I62c1b75682a48422f0ba1168dd5d7bd0952808ac
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Existing background image was not displayed correctly due to scaling
(see the description in related Jira task).
This commit increases the thickness of the lines, so that the grid
is displayed correctly
Task-number: QTBUG-89896
Pick-to: 6.0 5.15
Change-Id: Iaa8218a5e9852adbc40715e86862ac3b34e1fbec
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Complete search and replace of QtTest and QtTest/QtTest with QTest, as
QtTest includes the whole module. Replace all such instances with
correct header includes. See Jira task for more discussion.
Fixes: QTBUG-88831
Change-Id: I981cfae18a1cabcabcabee376016b086d9d01f44
Pick-to: 6.0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Provide execution context to QFuture continuations, instead of using
QMetaObject::invokeMethod calls for running in the main thread.
Change-Id: Ica7de19494065d677ffc94224781bfbe292b4f21
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Not much information in a bug report: QByteArray is protected from negative
sizes and QUdpSocket too. FWIW - add one more check, similar to what
the server counterpart already had.
Pick-to: 5.15 6.0
Fixes: QTBUG-83457
Change-Id: I585fa90e0a258d2257e4fed2f24c52b47548bcbb
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The documentation on High DPI was recently rewritten, renaming
several sections. This patch fixes the links which were broken
by this change.
Task-number: QTBUG-88533
Pick-to: 6.0
Change-Id: I5e9417554270a6740986d7cec5e3433d043e5560
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Similar to what has been done in 5138a970f3, we need to adjust the
remotecontrolledcar/controller dbus example to be built with qmake.
In the CI we first build the examples with CMake in the source
directory. That creates some generated source files in the dbus example
dir.
Then, the examples are (will be) built ouf of source with qmake, and
those generated source files will be placed in the build directory.
When building with MSVC, there's a peculiarity with nmake/jom's
inference rules that lead to picking up the generated car_interface.cpp
from the source directory, instead of the build directory.
See QTBUG-13496 for details.
car_interface.cpp, built with CMake is generated to include
car_interface.moc.
car_interface.cpp, built with qmake does not have this include, but the
build system calls moc on car_interface.h.
All this leads to duplication of the meta object for
OrgExampleExamplesCarInterfaceInterface, preventing successful linking.
Work around this issue by turning off the generation of nmake/jom
inference rules.
Task-number: QTBUG-85986
Change-Id: I0a6ca9f880b63f05a4e9f2032e44d3b391d8a756
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Prefix it with "Qt Widgets -" to make it a bit clearer in the list of
highlighted examples which module this one is about.
Pick-to: 6.0 6.0.0
Change-Id: I0bf65b02db72173f1adfe0bcf8657be7905dbd6c
Reviewed-by: Tuukka Turunen <tuukka.turunen@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
In order to demonstrate the new functionality, changed the example to
download the images from the network, scale and show them by attaching
different continuations to QFuture. Because QtConcurrent::map is not
used anymore, removed the suspension functionality (supporting
suspension of download would complicate the logic).
Task-number: QTBUG-87205
Change-Id: I5a48b63195d28025ae8c5de28bc6d6178dad03db
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
- Exclude forwarding headers to Qt GUI as they caused the headers
to be parsed twice.
- Drop documentation for removed example
Task-number: QTBUG-86295
Change-Id: I08eb46b7c7f813f103cc545f931896be99a3ccec
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
MarkdownDialectGitHub now includes this feature, so *emph* is italicized
and _emph_ is underlined. This is a better fit for QTextDocument capabilities;
until now, _underlined_ markdown could be read, but would be rendered with
italics, because in CommonMark, *emphasis* and _emphasis_ are the same.
But QTextMarkdownWriter already writes underlining and italics distinctly
in this way.
[ChangeLog][QtGui][Text] By default (with MarkdownDialectGitHub), markdown
_underline_ and *italic* text styles are now distinct.
Fixes: QTBUG-84429
Change-Id: Ifc6defa4852abe831949baa4ce28bae5f1a82265
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Remove or fix references to removed APIs, and some qdoc syntax fixes.
Change-Id: I67d71062cd7a29f4eb74b02199b1482af5e59fc0
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
This makes it feature comparable with QAction, and makes it possible
to use as a backend for QAction, and fixes a few missing alternative
keybindings in qtwidgets.
Change-Id: Iaefc630b96c4743fc5ef429dc841870ddd99fc64
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
All QFontDatabase APIs are static, use them accordingly.
Task-number: QTBUG-88114
Change-Id: I0e4a7508646037e6e2812611262eed8b6d7ad3de
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
If the mime data includes text/markdown, display it decoded in the QLabel,
and also display the raw markdown in the table below. QLabel supports
markdown since 51cbd5288c.
Ideally we should add proper support for markdown to QMimeData, but
it's too late to do that for Qt 5.
Pick-to: 5.15
Change-Id: I2a9998e4b239658fe49f39786e7c4fdd0c08b21a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
- Remove the casting operator of QFuture<T> to T. It calls
QFuture::result(), which may lead to undefined behavior if the user
has moved the results from QFuture via QFuture::takeResult() before
trying to do the conversion.
- Disable implicit conversion of QFuture<T> to QFuture<void>, by making
the constructor explicit. If the users really intend to do the
conversion, they should do it explicitly.
[ChangeLog][Source-Incompatible Changes][QFuture] Implicit conversions
of QFuture<T> to T and to QFuture<void> have been disabled. Use
QFuture::result() or QFuture::takeResult() where you need to convert
QFuture<T> to T. Use the explicit QFuture<void>(const QFuture<T> &)
constructor to convert QFuture<T> to QFuture<void>.
Change-Id: I153d4137d36365b1611ac934fb3ac2eb667fdd6c
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
- Fix linking to CMake manual.
- Remove references to the state machine framework.
Task-number: QTBUG-86295
Change-Id: I01a61088da8eb36760949f39be5e71d92de956f2
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
- Extended the documentation talking about it
- Initialize members in the header rather than in the ctor
- Some formatting changes
- Prefer connect-ing to QNetworkReply rather than QNAM for sslErrors
- Because we didn't use the QNetworkReply* argument
- Put the QNetworkReply pointer in a managed pointer
- Removed the code explicitly handling a redirect (it's the new default)
- Edited HttpWindow::httpFinished so that there're less places to reset
the reply pointer
- Updated some ifdefs I didn't update when I was revamping this example
3 years ago
Task-number: QTBUG-87306
Change-Id: I10a6f756c09908f199ac9c61e28b49625af10105
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The examples use an intermediate object library to avoid duplicate
file compilation. The examples worked when built as part of Qt
because the shared directory was always added, and Qt::OpenGL is
available implicitly.
Change each project to add_subdirectory(../shared) if the object
library is not available, thus making the examples build as standalone
projects.
Call find_package inside the shared project, to ensure the Qt packages
are found.
Create an alias called 'painting_shared::painting_shared' and link
against that to ensure that any failure is caught at configure time
rather than build time.
Adapt the pathstroke example to use the object library.
Comment out the code for the OpenGL scopes, because it's handled
by the object library.
Make sure the OpenGL dependency is public.
Make sure to run moc and compile the OpenGL specific files as well.
Task-number: QTBUG-87444
Change-Id: Ib0ecb68948581c5267ca04f19d8043fa44ff3d54
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
As well as the MACOSX_BUNDLE properties as necessary.
Task-number: QTBUG-87664
Task-number: QTBUG-86827
Change-Id: I7677449a26d51fa853bd67bab6b3b61afbd2b12f
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
- Add a clear button to the line edit
- Indicate invalid regular expressions
Change-Id: I1dbeaa0f9168224ccb9134c0c1fe281da14dcbce
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
We have never had enough examples that show how easy it is to install
a QScroller. In this case, one line makes a QTreeView flickable.
Pick-to: 5.15
Task-number: QTBUG-86090
Change-Id: Idb8b4709617befb261f3b78d63ddbdaf5ad18d6b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Use QScreen APIs instead.
Change-Id: Ie99af94fe4292223dbb165b3f5c1b74e8fe0498b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
This time based on grepping to also include documentation, tests and
examples previously missed by the automatic tool.
Change-Id: Ied1703f4bcc470fbc275f759ed5b7c588a5c4e9f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
We were already using the 'native' nomenclature when referring to these
kinds of APIs, e.g. when talking about native handles, or the existing
QPlatformNativeInterface on a QPA level. Using 'native' for the user
facing APIs also distinguishes them from the 'platform' backend layer
in QPA and elsewhere.
Change-Id: I0f3273265904f0f19c0b6d62471f8820d3c3232e
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Try to get rid of APIs that use raw 'const {char, QChar} *, length'
pairs. Instead, use QByteArrayView or QStringView.
As QStringConverter is a new class, simply change the API to what we'd like
to have. Also adjust hidden API in QStringBuilder and friends.
Change-Id: I897d47f63a7b965f5574a1e51da64147f9e981f6
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Clean up the state of the projects,
before changing the internal CMake API function names.
Task-number: QTBUG-86815
Change-Id: I90f1b21b8ae4439a4a293872c3bb728dab44a50d
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
It is lossy, so should be requested explicitly, using a dedicated
fromPixmap factory function.
Deprecate the constructor and assignment operator, and make the
constructor explicit.
[ChangeLog][QtGui][QBitmap] Implicitly constructing and assigning
to a QBitmap from a QPixmap has been deprecated, and the respective
constructor has been made explicit. Use the fromPixmap factory
function instead.
Change-Id: I68ce85b26c901415137b664a1db687021d48bae0
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Undeclared identifier ssize_t etc. Just use int. Not like we can have
more than a handful of physical devices anyway.
Change-Id: Ie1fb7ab9794a7d39e84db864c2be6dbdd5d97f50
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Fix our API, so that QStringList and QList<QString> are the
same thing.
This required a bit of refactoring in QList and moving the
indexOf(), lastIndexOf() and contains() method into
QListSpecialMethods. In addition, we need to ensure that
the QStringList(const QString&) constructor is still available
for compatibility with Qt 5.
Once those two are done, all methods in QStringList can be moved
into QListSpecialMethods<QString>.
Change-Id: Ib8afbf5b6d9df4d0d47051252233506f62335fa3
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As per ### Qt6 comment. Also rename the LibraryLocation enum
to LibraryPath.
Change-Id: I556025a19c5bcdf2ff52598eaba32269522d4128
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Merging QAbstractPrintDialog with QPrintDialog, as proposed in the
removed comment, seems to have little value, given that the platform
specific implementations rely on the current abstraction.
Adjust examples and tests; with the QAbstractPrintDialog test now
testing the QPrintDialog::options API, the corresponding test function
can be removed from the QPrinter test.
Change-Id: Ia8906627898332e8590ea9b27e3d71dfcc6e8d71
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
