The Intel compiler defaults to "fast math" mode, which is why those
tests had been failing. So for the test that is trying to check whether
we conform to IEEE strict requirements, turn on strict requirements.
Change-Id: I02f8426b1c8e4241ac10ffff13e8efa224f313b2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Since Connection can be copied, one copy could be used for
disconnecting, but the other's d_ptr wouldn't get updated and would
continue to report as still connected.
This patch fixes that by making it check the internal state. That is
only done after d_ptr is already known to be non-null. Unfortunately,
that is the common path:
if (connect(sender, &Sender::signal, [] {}))
will call an out-of-line function. I don't see a way out.
Task-number: QTBUG-46213
Change-Id: I66a35ce5f88941f29aa6ffff13dfb45dca68a350
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Global (application-level) event filters are supposed to be run only in
the main thread, so ensure that it is the case.
Change-Id: I27eaacb532114dd188c4ffff13d5a17d991b8bd2
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
...by moving common code into the Private ctor,
and catering for C++11 move semantics a bit.
Saves ~1.5KiB in text size on Linux GCC 4.9 C++11 release
builds.
Change-Id: I52ed7e47f76b69500a871844c0920e27fe51a127
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It's just a test, but it's in the way of automatic tracking
of inefficient QLists.
Change-Id: I2dcfd81c9e208dab57bb256d7c276ad5303f196c
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
... and enable auto-deletion on it.
This allows users of the function to get rid of their own
cleanup code. They just need to keep the shared pointer alive
for as long as they need it.
Drive-by changes:
- replaced QStringLiterals that were only used as the rhs of op+
- replaced an instance of mid() used as the rhs of op+ with midRef()
- enabled NRVO
Change-Id: I161d39461e020c9e8d473c0810dea2109fe0d62d
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
They didn't show up in the "old" CI runs because they usually pass the second
time they are executed - which the testrunner does. The new CI doesn't do that
anymore, instead we now mark those tests explicitly and will track their record
of passing and failing in the new metrics database.
Change-Id: Id34dd6f792f38995b07b6fec88f833df64de2f8b
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
This allows for example properties with QMap<Foo, Bar>
[ChangeLog][QtCore] Types in the Q_PROPERTY macro can now contain commas
(for example, QMap<Foo, Bar>)
Change-Id: Ibf5c8c9cf20a7c8b3dfec9e891fb8a9ca1bdba7c
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Zero is a legitimate size to be returned by bytesFree/bytesAvailable
functions, so change those functions to return some 'invalid' size
in case of an invalid drive.
This is also consistent with the original version from the Qt Systems
framework.
[ChangeLog][QtCore][QStorageInfo] Fixed sizes returned for invalid drives.
Task-number: QTBUG-45724
Change-Id: I312fba521fdf8d52d7a0ac0e46cacca625775e80
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Previously, QStandardItem::operator<() returned true when both
items had invalid data. With MSVC in debug mode (checked
iterators/STL), this triggered an assert in
tst_QStandardItem::sortChildren() since that verifies
that !(b < a) when a < b:
Debug Assertion Failed!
Line: 3006
Expression: invalid operator<
Introduce a stable sort order for invalid items such that
other items are always less than invalid items and comparing
invalid items returns false (indicating equivalence).
Change-Id: Ica0f0d9f001c86973b1941dbcc1faf282e4c47df
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Give the link a name containing time stamp and ensure
it is deleted.
Change-Id: I846c58095acbcd92e7daccfd43a69dd97e95e7b0
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Previously, the path was removed from list returned (indicating failure
to remove) only when the thread's list was empty
(last file in directory). Move the statement up so that removal
happens when it is found in thread's list.
Task-number: QTBUG-46449
Change-Id: Ib79199c731f79357b0e5c17636254fbeb3a754a0
Reviewed-by: Robin Burchell <robin.burchell@viroteck.net>
OS X has an unreasonably low default for the maximum number of open
file descriptors (256). The unit test creates about 200 threads and each
thread in Qt creates at least two file descriptors (pipe), so the test
cannot execute.
Change-Id: I656367bca6d0a40fb1edb8c72914304db0f429ac
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
As discussed on the development mailing list, the new overload is ambiguous
and breaks source compatibility. Therefore this function that is new in 5.5
shall be called readLineInto.
Change-Id: I2aecb8441af4edb72f16d0bc6dabf10cdabf32e2
Reviewed-by: Jan Kundrát <jkt@kde.org>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The pattern "mySet.intersect(other).isEmpty()" has been spotted in
the wild and in Qt codebase. intersects() is much cheaper because it
bails out as soon as we find one common item and doesn't do any
allocations.
[ChangeLog][QtCore][QSet] Added intersects().
Change-Id: I44a350dc4cdb9deb835a23eee99fc99d6ca24c82
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
We have at least 5 different (but equal) implementations of a wrapper
in Qt, and some code uses explicit NSAutoreleasePools. Having a shared
implementation lets us clean up things a bit and makes it easier to
reason about which pools are actually needed.
Change-Id: I2fd8eefc3ae7308595ef9899b7820206268362a5
Reviewed-by: Tim Blechmann <tim@klingt.org>
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Do not try to automatically register the meta type for Q_GADGET that
are not default constructible.
This fixes a source incompatibility in the function pointer syntax
of QObject::connect when such types are used as an argument of a signal.
Task-number: QTBUG-45721
Change-Id: I3065f6d57bc1f37e16988d2dee99118de250ca56
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Convenience to avoid annoying detaching (instead of using at()),
especially on temporary vectors (returned by functions or so).
[ChangeLog][QtCore][QVector] Added the convenience constFirst
and constLast functions.
Change-Id: If61b1f0096f6a7a1c9074340e237cc2376ce3d18
Task-number: QTBUG-46026
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
To cover the situation that the process ID got reused, the current
process name is compared to the name of the process that corresponds
to the process ID from the lock file.
If the process names differ, the lock file is considered stale.
[ChangeLog][QtCore][QLockFile] Detection of stale lock files got more
robust and takes the name of the process that belongs to the stored
PID into account.
Task-number: QTBUG-45497
Change-Id: Ic3c0d7e066435451203e77b9b9ce2d70bfb9c570
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: David Faure <david.faure@kdab.com>
Otherwise the type is registered with the wrong name
Change-Id: I68ec3a05e2528816626e648b46ccc9d70b004866
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Include class name, object name and file name when available.
For the bug in question:
QIODevice::read: device not open
becomes
QIODevice::read (QTcpSocket, "QFtpDTP Passive state socket"): device not open
Adding a static function also makes it easier to set a breakpoint
and find the culprit.
Task-number: QTBUG-46112
Change-Id: Ic181d8ab292912d1acbcc3cb84d9679fe4842ca0
Reviewed-by: Laszlo Papp <lpapp@kde.org>
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Otherwise, make check does nothing, always succeeding.
Change-Id: I0fe04697e02ab0f33cd9aebb550777e200c70804
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
freeData() takes a Data*, not a QContiguousCacheData*.
Task-number: QTBUG-45783
Change-Id: I96d7ac38dac24b418138ffff13d7fdf09b1d6b07
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reduce the size of .text section in QtCore by 4.5KB and in QtNetwork
by 26.5KB.
Change-Id: If7998776166b9681c1e4b24c51d40444aa996d7a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
If the internal queue contained multiple events, but the first one did
not select any transitions, the external event queue would be checked
before the remaining events in the internal queue.
Change-Id: I1a7f49afdefaaf2b4330bf13b079b61344385ea0
Task-number: QTBUG-46059
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
QMachOParser is defined in the private header that only gets included in
developer-builds. Thus ifdef its usage out, not just the header
inclusion.
Change-Id: I1e0059787be6eb70bd1661c7814e69eee7c5b2ee
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
My commit 6c973dee2c broke the case where setApplicationName
is called before the QCoreApplication constructor.
Fixed and added autotest.
Task-number: QTBUG-45283
Change-Id: If7bdb0d82be50b50a95a04027f5f9d7143c1a7ac
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
When there are conflicting transitions, a transition that is nested
deeper (i.e. more specific) has priority. If two transitions have the
same nesting level, the one that comes first in the document order gets
priority.
Before this patch, only the document order was considered.
Change-Id: I58f188c270cabe2c386a783ceef7a0a955105425
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
QReg*Exp*s can be compared for equality,
so qHash should be overloaded, too.
There was a (poor) private implementation of qHash(QRegExpEngineKey)
already, which has now been replaced with a better one (the old one
didn't take into account all the fields that make up equality,
producing unnecessary collisions).
[ChangeLog][QtCore][QRegExp] Added qHash(QRegExp).
[ChangeLog][QtCore][QRegularExpression] Added qHash(QRegularExpression).
Change-Id: I1d22fbcc0508018a3f94b4c24571b13ba6e07df2
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
The behavior of "external" and "internal" transitions is identical,
except in the case of a transition whose source state is a compound
state and whose target(s) is a descendant of the source. In such a case,
an internal transition will not exit and re-enter its source state,
while an external one will.
[ChangeLog][State machine] Added support for internal transitions.
Change-Id: I9efb1e7368ee52aa2544eb84709a00ae3d5350d3
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
As nothing changes in the state machine when selecting transitions for
events and then calculating the exit- and entry-sets, some calculations
can be cached.
The exit set for a transition was calculated multiple times. First in
removeConflictingTransitions, where the two loops would each calculate
them multiple times. Then secondly in microstep(), which would calculate
the exit set for all transitions.
Transition selection, exit set calculation, and entry set calculation
all calculate the transition domain and effective target states for
transitions.
Change-Id: I217328a73db2f71e371eb5f60a0c7b222303f0ca
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Doing a build on OS X without -developer-build fails.
Change-Id: I49c178ab2428177d9dd94f84620595a4bc132244
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Fixed issue that text/uri-list mimedata got from QMimeData::data()
was corrupted after setting it back via QMimeData::setData()
Change-Id: I2377523a9286519402ab9127ed7f3fa66e39a679
Task-number: QTBUG-45486
Reviewed-by: David Faure <david.faure@kdab.com>
Remove the insignificant_tests CONFIG option in favor of a BLACKLIST
file. The tests blacklisted have been found using CI builds logs.
Change-Id: I34374ed7269f941c330c65d97fe083c83d3df461
Task-number: QTBUG-33574
Task-number: QTBUG-30943
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
this makes the distclean targets work throughout qt.
the dreaded confclean target is aliased to distclean.
Task-number: QTBUG-8202
Task-number: QTBUG-20566
Change-Id: I7ac8e3b5b0110825dc93e4fa885281db91c6cf83
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Return QLockFile::PermissionError when file does not exist, preventing
the stale file detection logic from triggering.
Add Windows-only autotest trying to create a lock file in
a system folder guarded with checks for elevated processes
and UAC virtualization.
Task-number: QTBUG-45631
Change-Id: I1790f8f925660f6bf1df94c2ced901e6ec57cbb0
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Add a special signal spy that records the time and path received
to obtain information on what triggered it for the flaky
cases where more than the expected signals were emitted.
Task-number: QTBUG-30943
Change-Id: I67510ce5e8e19b49c0ca41457f8357b720cade76
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
This caused reverse order of session items in qt creator. Introduced
in ba287c55ef.
Change-Id: I5c37ca6a1ef4753b6449eb9e87b4def5ea858677
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
QVectors can be compared for equality, so qHash should be overloaded, too.
[ChangeLog][QtCore][QVector] Added qHash(QVector).
Change-Id: I2aacce55d416abf2492631a504a02c6e8fc4ff1c
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
QUrlQueries can be compared for equality, so qHash should be overloaded, too.
[ChangeLog][QtCore][QUrlQuery] Added qHash(QUrlQuery).
Change-Id: I626258a938359b49a0cae02012b6cba5ef1fe784
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QLists can be compared for equality, so qHash should be overloaded, too.
[ChangeLog][QtCore][QList] Added qHash(QList).
Change-Id: I9ad91811f12479764cc17d87192539612ceb0b4c
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
[ChangeLog][QtCore][QLockFile] Fixed a deadlock when the lock file
is corrupted.
Task-number: QTBUG-44771
Change-Id: Ic490b09d70ff1cc1733b64949889a73720b2d0f3
Reviewed-by: David Faure <david.faure@kdab.com>
This patch addresses a specific Qml problem, where the meta types list
will grow indefinitely when unloading and reloading Qml components over
and over (in an failed effort to save memory).
The implementation is not specific to Qml though, but will cater to all
use-cases where registered types may not live until the application's
termination.
Change-Id: Ic0224dcd19aeb559715ef088b22a30509be2456b
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
After selecting all (enabled) transitions for a microstep, filter out
any conflicting transition. The actual conflict resulution is done by
ordering the transitions in order of the states that selected them.
For example: if an event would trigger two transitions in a parallel
state where one would exit that state and the other would not, this
filtering prevents the state machine from selecting both states (as this
case is an invalid state of the whole machine).
This also fixes the exit set calculation for parallel states when one of
its substates is exited and subsequently re-entered in the same
transition. Previously, the parallel state was not exited, and
subsequent re-entry was ignored (because it was still active). Now it is
correctly exited and re-entered.
A side-effect of the transition ordering mentioned above is it also
fixes the non-deterministic behavior of which of the conflicting
transitions is taken.
[ChangeLog][QtCore] Fixed an issue where the state machine could end up
in an invalid state when transitions from a parallel state were not
checked for conflicts.
[ChangeLog][QtCore] Fixed a case where a parallel state was not exited
and re-entered when one of its substates was exited and subsequently
re-entered.
[ChangeLog][QtCore] Fixed the non-deterministic behavior of picking a
transition from a set of conflicting transitions.
Task-number: QTBUG-44783
Change-Id: I2ee72b6a2f552077bfa7aa4d369474ab62f4c2f0
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
When a history state is entered that has an actual saved history (so not
the initial state), the entry set was calculated wrongly in some cases.
See the bug report for the specific case.
The fix is to fully implement the standard, so method names in the
private class are updated to reflect the names as used in the standard.
Note that, as mentioned in the bug report, the algorithm as described in
http://www.w3.org/TR/2014/WD-scxml-20140529/ has a bug. What is
implemented is the fixed algorithm as described in the current working
draft as of Friday March 13, 2015. This draft can be found at:
http://www.w3.org/Voice/2013/scxml-irp/SCXML.htm
[ChangeLog][QtCore] Fixed an issue where a history state restore would
activate too many states, possibly putting the state machine in an
invalid state.
Change-Id: Ibb5491b2fdcf3a167c223fa8c9c4aad302dbb795
Task-number: QTBUG-44963
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Add an ordinary peek() function which also allows retrieving data from
a specified position. We need this functionality in several places.
Change-Id: Ia4a1b6fe1d7f76cb8f6f1ea34b3e4b89e05a2a68
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QSaveFile is intended to be a replacement for QFile, and should use the
same permissions for newly created files. QTemporaryFile however creates
new files with 0600 mask by default.
Fix this by making the mode_t argument QTemporaryFileEngine uses
configurable, and using 0666 for QSaveFile (like we do in QFile).
[ChangeLog][Important behavior changes] Files created by QSaveFile do
now have the same rights as files created by QFile. This also fixes a
regression in QSettings: In the Qt 5.4 series, new files created by
QSettings were only readable by the current user.
Task-number: QTBUG-44086
Change-Id: Ie1cc20e9f25c6e72e1bc9176490c419c27c5fc82
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
std::vector has them, too.
[ChangeLog][QtCore][QVarLengthArray] Added relational operators <, <=, >, >= if the element
type supports operator<.
Change-Id: I69e16d361fd4738a56b292ebfa78316d28871eda
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
std::vector has them, too.
[ChangeLog][QtCore][QList] Added relational operators <, <=, >, >= if the element
type supports operator<.
Change-Id: Id2bd905e92c0365ad9f439d49908045c8df309c3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QString::append(QStringRef) exists, and so should prepend().
QString::append(const QChar *,int) exists, and so should prepend().
[ChangeLog][QtCore][QString] Added prepend(QStringRef) and prepent(const QChar *, int) overloads.
Change-Id: I3eca41045f7c481be473507e23e92690f3ed7ba3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
... using the framework developed for testing QString::append.
Change-Id: I29011eba6438bf9b3daad354cbec4b8e2b98ed81
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It is tedious to test all the overloads of QString::insert,
so get the help of the compiler to do it. The framework
was originally developed for testing append.
This change showed that the insert(int, QStringRef),
insert(int, const char*) and insert(int, QByteArray)
overloads were missing. They will be added in a separate
commit.
Change-Id: I609b8a05203f8a1ea12827d1798313ace5b719f2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It is tedious to test all the overloads of QString::prepend,
so get the help of the compiler to do it. The framework
was originally developed for testing append.
This change showed that prepend(QStringRef) and
prepend(const QChar*, int) overloads were missing. They will
be added in a separate commit.
Change-Id: Ic3d6ad011bedc6ee7d5024094d7c3529b1b9d669
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It is tedious to test all the overloads of QString::append(),
so get the help of the compiler to do it. The framework
developed for this will be used in subsequent commits for
prepend and insert, too.
Change-Id: I89df581b6d037a5af80b34dd6b5d37ac7484c774
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Unearthed an off-by-one error in a QByteArray::fromRawData() call in
tst_qtextdocumentfragment. Fixed by porting to QStringLiteral.
[ChangeLog][Important Behavior Changes] All conversions from QByteArray
to QString now preserve embedded NULs. This is done in order to provide a
faster conversion from QByteArray to QString that does not involve a call to
strlen. If you need the old behavior, convert from QByteArray::constData()
instead. If you are porting from Qt 4, we suggest to make your source compile
with QT_NO_CAST_FROM_BYTEARRAY before porting to Qt 5.
Change-Id: Ibca40f503920fee6f3a5f0d74a04b38b8849796f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Currently, calling these functions with a null QByteArray will return
a non-null QString because QByteArray::data() never returns nullptr.
This behavior leads to inconsistencies between QString::append overloads,
in particular the QByteArray vs. all others (null + null test always
returns a null QString, except for the QByteArray overload before this
change).
It also is inconsistent with the const char* overloads of these methods,
which explicitly preserve nullness (as verified by test cases).
Fixed by an explicit check for nullness and return of null QString.
Alternative would have been to check for nullness and pass nullptr
instead of ba.data() to the _helper() functions, which do the correct
thing in that case. But since we'd have the check anyway and with the
chosen strategy we can avoid a call to a non-inline method, I opted
against that.
[ChangeLog][QtCore][QString] fromLatin1(), fromAscii(), fromUtf8() and
fromLocal8Bit() now return a null QString when called with a null
QByteArray.
Change-Id: I5f2c0bad27fb73c7d535085af0271823bf6ed1da
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
std::vector has them, too.
[ChangeLog][QtCore][QVector] Added relational operators <, <=, >, >= if the element
type supports operator<.
Change-Id: I0bcb22dfcc43cb0362f17b4e06154ce18646580a
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Two new function families have been added: qFindFirstSetBit() and
qFindLastSetBit() for a variety of integer sizes. Fast implementations
are included for most platforms.
[ChangeLog][QtCore][QtAlgorithms] Added qFindFirstSetBit() and
qFindLastSetBit().
Change-Id: I89d9d1637ea26070aee5a60be95be1b51bfc84dc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add a dedicated operator=(std::initializer_list) that
first resizes the QCLA, and then replaces the elements
one by one.
This should be usually faster than creating a temporary
QCLA and then copying it, except for the case where the
new array does not fit into the allocated stack - but this
is IMO nothing to optimize for.
Task-number: QTBUG-45041
Change-Id: I147d6d01186b1ca3c635b2c8365d8f6e638ce6fe
GPush-Base: 08de3113051e1289f0de0651ec5647c9ee6feb27
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Concept of 'current position' exists only for random-access devices.
As documented, for sequential devices QIODevice::pos() must always
return 0. Prevent a modification of the internal 'pos' member in
QIODevice::readAll() method to follow this rule.
Change-Id: Ida2ee6a629ccfc3068d62f95ab1064ada13fdda5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
+ A bunch of fixes in the locale data
+ New scripts from Unicode 7.0
+ New locales
- Some locales disappeared (aa_DJ, aa_ER, st_LS, ss_SZ, swc_CD, tn_BW)
- Some locales lost their contents (i.e. en_Dsrt_US)
[ChangeLog][QtCore] QLocale data updated to CLDR v.27
Change-Id: Iba8c7884f8087e577cbb25a8fc106dd7bd3ebb5d
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
* Two newly adopted currency symbols:
the Azerbaijan manat and the Russia ruble
* Pictographic symbols (including many emoji), geometric symbols,
arrows, and ornaments originating from the Wingdings and Webdings sets
* Twenty-three new lesser-used and historic scripts
extending support for written languages of North America, China, India,
other Asian countries, and Africa
* Letters used in Teuthonista and other transcriptional systems,
and a new notational set, Duployan
For more details, see http://www.unicode.org/versions/Unicode7.0.0/
The Properties struct's .*Diff members were narrowed down
to signed 15 bits and the unicodeVersion has been expanded to 8 bits.
[ChangeLog][QtCore] Unicode data updated to v.7.0
Change-Id: I93ab6f79fa3b05f61abc7279f1d046834c1c1a0b
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
There appears to be at least one fix, related to sign- or zero-extension
in the call to isspace(). So it's a good idea to update again. This also
brings the behavior to match strtoll and strtoull on Linux, including
the fact that strtoull will parse negative numbers. For that reason,
qstrtoll and qstrtoull are now wrappers that try and keep the behavior
that we used to have.
This update also changes the code from a 4-clause BSD license (bad) to a
3-clause BSD license (good).
Change-Id: I73b01b02ebd1551bf924599d52284ad25cc1def0
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
When building the test while qtbase has been installed and the
build dir was removed, the include paths were not found in
frameworks builds.
Change-Id: I32d9e61176a5e19c86095580ddad6914f25ff952
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Without QProcess support we do not run test which initTestCase is
trying to find.
Change-Id: Icecaad90f61a019489e372517a6d62372155bd46
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Implement an initializer_list constructor, which was probably
just forgotten so far. Technically this is a SC incompatible change,
since
QVarLengthArray<int> array = {10};
will now create an array with one element 10, instead of an empty array
with a reserved size of 10. Anyhow, keeping the inconsistency with the
STL / other Qt containers here would certainly do more harm than good
in the long run.
Task-number: QTBUG-45047
Change-Id: I4675880f93e141181250939942fa32300916b0e3
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Since Qt 5.0, static overloads of QChar has a uint parameter only,
so there is no more ambiguity between uint<->ushort and thus some tests
does not make sense anymore; avoid explicit cast to uint for the others.
Change-Id: Ibc7a2ac4de63d3f023a8dbb5e53211ef8521579d
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Added casting to QT_OFF_T type. Otherwise fails on some
compilers.
Change-Id: I4f1f0c558af7d182a4babf38a7f048b27b3db611
Reviewed-by: Pasi Petäjäjärvi <pasi.petajajarvi@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When using non latin keys, remove() could cause corruption
of the json object.
Task-number: QTBUG-42270
Change-Id: I7305e57ebb78630a9bf68bc4f831a6d1646abb79
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
ICU doesn't support iso8859-16, so we need to fall back to
the Qt codec for this encoding.
Task-number: QTBUG-45053
Change-Id: I9754cf098c906fe8a75363a3d090029543cd0e35
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QObject::connect tries to determine if the arguments are registered
metatypes. This used to work even for arguments that were forward
declared. But now, the metatype system tries to call
QtPrivate::IsQEnumHelper<T>::Value to know if it is registered.
That fails on gcc if T is forward declared.
Apparently gcc needs to know the full type of T to pass it in the
ellipsis function, even within a sizeof expression.
So change the ellipsis expression to a template one.
Task-number: QTBUG-44496
Change-Id: I7fa07bd3cde470b134c2ec53b0d581333d16a6f1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This system is no longer in the CI rotation and we haven't had reports
of the same issues happening on later versions. Either the issues have
since been fixed or they were never an issue in Qt in the first place.
This commit has the additional benefit of getting rid of the following
shell error when qmake was run:
sh: line 0: [: =: unary operator expected
as /etc/lsb-release hasn't contained DISTRIB_CODENAME for some time and
proper quoting was never implemented (not even qtcpsocket.pro).
Change-Id: Ia0aac2f09e9245339951ffff13c829e910ee64e9
Reviewed-by: Albert Astals Cid <albert.astals@canonical.com>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- removed an unused field
- initialized variable that might be used uninitialized.
Change-Id: I7a7a063f025ecc32fa462dd8d5e2485c2ba52eb8
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
