A \l was changed to \c to be consistent with all the other references
to the class name..
Change-Id: Ic7449a06e0a1f1d6d7087e11cc85258e81a0dfab
Reviewed-by: Martin Smith <martin.smith@qt.io>
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
It hasn't been necessary for a long time now to write the recursive
file-find function manually. It has just been an obscurely documented
feature of QDirIterator for far too long.
Demonstrate the new QLocale::formattedDataSize() function.
Also sync up the qdoc description of this example with the recent changes.
Change-Id: I9c2bb15bb5ec353d38181b160f0be198774cbea2
Reviewed-by: Robin Burchell <robin.burchell@crimson.no>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
- Edited gettingstartedqt.qdoc
- update .pro files
- replaced snippet statements by \quotefromfile
- removed second version of notepad.h and notepad.cpp
that were made only for quoting snippets
(\quotefromfile reads from the program code)
- show current filename in header of window
- added checking routine on filename in Save method
Task-number: QTBUG-63984
Change-Id: I5298d761763a4dfeb705a1d9b77354be853ada88
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
QFontMetrics(F)::width() has been deprecated and is replaced by
horizontalAdvance(). This updates all usage of it in tests and
documentation.
It is worth noting that many or most of the usages of
QFontMetrics::width() probably intended to use boundingRect().width(),
but since it currently works, I have not looked into that, just
replaced the function name mechanically.
Change-Id: Iec382e5bad0b50f37a6cfff841bfb46ed4d4555f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
There are plenty of other examples showing how to use QStateMachine
Task-number: QTBUG-60635
Change-Id: I82300b2a0f4e7733f08579a2aa9b548cb7d87efa
Reviewed-by: Venugopal Shivashankar <Venugopal.Shivashankar@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The vast majority is actually switched to QRandomGenerator::bounded(),
which gives a mostly uniform distribution over the [0, bound)
range. There are very few floating point cases left, as many of those
that did use floating point did not need to, after all. (I did leave
some that were too ugly for me to understand)
This commit also found a couple of calls to rand() instead of qrand().
This commit does not include changes to SSL code that continues to use
qrand() (job for someone else):
src/network/ssl/qsslkey_qt.cpp
src/network/ssl/qsslsocket_mac.cpp
tests/auto/network/ssl/qsslsocket/tst_qsslsocket.cpp
Change-Id: Icd0e0d4b27cb4e5eb892fffd14b5285d43f4afbf
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
They are not updated after switching tabs. Thus they can be enabled even
when no entry is selected: select an entry on the current tab and then
switch to an empty tab.
Emit AddressWidget::selectionChanged() signal after changing the current tab
to update these actions.
Change-Id: I00da15ed6c3d3839210ae3ffbe1436e234695522
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Introduce Contact struct to store contact data and use it
instead of QPair<QString, QString>. Proper naming really
clarifies the code.
Task-number: QTBUG-60635
Change-Id: Ibfb421dfc854accc382212b0da46e7aafc0d528a
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
- new screenshot with more up-to-date graphical look
- deleted itemviews-editabletreemodel.png from old folder
doc/src/images
- deleted unnecessary item in qtwidgets.qdocconf
Task-number: QTBUG-60635
Change-Id: I9b82fa027347fb0fd7adb86038abd32853e68c3a
Reviewed-by: Venugopal Shivashankar <Venugopal.Shivashankar@qt.io>
Use M_PI (and friends), where possible, in favor of hand-coded
approximations of various (in)accuracies. Where that's not available
(e.g. fragment shaders), use the same value that qmath.h uses for
M_PI, for consistency. Replaced math.h with qmath.h in places that
defined a fall-back in case math.h omits it (it's not in the C++
standard, although M_PI is in POSIX); or removed this entirely where
it wasn't used.
Reworked some code to reduce the amount of arithmetic needed, in the
process; e.g. pulling common factors out of loops. Revised an
example's doc to not waste time talking about using a six-sig-fig
value for pi (which we no longer do) - it really wasn't relevant, or
anything to be proud of; nor did the doc mention its later use.
Task-number: QTBUG-58083
Change-Id: I5a31e3a2b6a823b97a43209bed61a37b9aa6c05f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The documentation of QSyntaxHighlighter still uses the deprecated
QRegExp class. This patch updates the code samples as well as cleanup
some typos.
Change-Id: I87b525fddb560b7c5bb38f96d9aaceadb594f76c
Reviewed-by: Sze Howe Koh <szehowe.koh@gmail.com>
The example has already been ported to QRegularExpression however part
of the documentation still referred to the QRegExp class. This patch
updates the documentation to match the new version of the code.
Change-Id: Id433d0b28deae0c4f702c0c54d2704174f8c7689
Reviewed-by: Sze Howe Koh <szehowe.koh@gmail.com>
As of version 10.12 (Sierra), the name of Apple's desktop operating
system will be macOS. Change the occurrences where the Mac platform
is discussed to use a macro \macos, which expands to 'macOS'. This
helps with adapting to future renaming.
Update the instructions on mac-specific Q_OS_* macro usage.
Add a \target for the old 'Qt for OS X' topic to keep links working
for other documentation modules that try to link with the old name.
Change-Id: Id33fb0cd985df702a4ae4efb4c5fd428e77d9b85
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
- Simplify the code, remove unused members
- Fix the translations of plurals to use %n
- Add tooltip displaying full paths in list
- Add context menu allowing to copy the name and open
- Display the correct slashes on Windows
- Connect the returnPressed() signals of the line edits
- Make the search recursive
- Do not search binary files by checking the mime type
Change-Id: I3663799c88931db1f58c03ea35211e7ab03737ec
Reviewed-by: Topi Reiniö <topi.reinio@theqtcompany.com>
as in other examples which come with plugins, use an additional
hierarchy level which contains the app and plugin subdirs.
Change-Id: I2487755967aa3474c337c8c8af10be49627b63d0
Reviewed-by: Topi Reiniö <topi.reinio@theqtcompany.com>
Update files using old header.LGPL3 to header.LGPL
Update files using old FDL template to use new one
Update files using old BSD template to use new one
Change-Id: I36a78272516f9953d02956522f285b40adfc8915
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
- Introduce Qt 5 signal-slot connection syntax.
- Merge MainWindow::createMenus()/createActions()
into MainWindow::createMenus(), removing the need
to store the actions as member variables.
Use QMenu::addAction() for brevity.
- For actions in QActionGroups, carry the Valuator enum
in QAction::data so that the slot to handle the selection
does not need to compare the QAction pointer itself.
- Use a non-modal QColorDialog, so that the user
can change colors more easily while drawing.
- Choose saner shortcut keys: control-Q should not
override the default usage for quitting the application,
and using shortcuts for About dialogs is anyway dubious.
- Improve the example documentation.
Change-Id: I57aaf5f5b885c13a953482dbcc41275dd3d6bff4
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Topi Reiniö <topi.reinio@theqtcompany.com>
