Emscripten only supports
SSE1, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, and 128-bit AVX instruction
sets at this time.
https://emscripten.org/docs/porting/simd.html
Browsers might need to enable simd support in the advanced
configurations
about: config or chrome:flags
Enable by configuring Qt with -sse2
Pick-to: 6.2
Fixes: QTBUG-63924
Change-Id: Ifeafae20e199dee0d19689802ad20fd0bd424ca7
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Whether Qt is built with PrintSupport is now listed under "Qt modules
and options" in the configure summary.
Pick-to: 6.2
Task-number: QTBUG-88535
Change-Id: Id367c9594482b0764da679c3cbdee2f5108201ef
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We're passing -Oz for release builds, but that's not a flag the linker
understands when -ltcg is enabled. The build fails with:
ld.gold: fatal error: Optimization level must be between 0 and 3
Fix this by using -O2, which -Oz is based on, and -O3 for the "full
optimization" that is used for core and gui.
Pick-to: 6.2
Fixes: QTBUG-89472
Change-Id: Ie1a86888baefce5ca97026e7d635f10d2819f9f4
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The -coverage argument merely added compiler flags for the Qt build. It
was never properly ported to the CMake build, and it doesn't seem
feasible to have configure arguments for every possible compiler option.
The same can be achieved by passing the needed compiler option to CMake,
for example: CMAKE_CXX_FLAGS=-fsanitize-coverage=trace-pc-guard
Pick-to: 6.2
Fixes: QTBUG-86227
Change-Id: Ieef9acaedc0a839f9fb35b4403395eea28643864
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
qt_config_linker_supports() repeated the conditions of all use_*_linker
features, because the features are not evaluated yet when this function
is called, and the function needs to know what linker is used to build Qt.
Move the required tests and features before any
qt_config_linker_supports() call and evaluate the use_*_linker features
early.
Change-Id: I306f032356682a0e82e4d7c4234e5bbc820ab143
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This configure test always failed, and its result was never used.
Pick-to: 6.2
Change-Id: I5112464b247efb5327ef5c23c96ef27168c11afc
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Consumers can now check the "debug" feature to determine whether Qt was
built in the "Debug" configuration.
Pick-to: 6.2 6.1
Change-Id: I225125d38ded508e9792a730ce421b33bceacddf
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Adds runtime CPU detection for Windows and macOS, and switches feature
detection of AES to runtime like for x86,
So far only on ARM64, since gcc doesn't do function versioning on ARM32,
but clang can, so it could be added later.
Change-Id: Ibe5d60f48cdae3e366a8ecd6263534ba2b09b131
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
MSVC does not have pthreads.
"QT_FEATURE_thread" should mean "Enable thread support".
And I think this note is only meaningful for WASM. For other platforms,
thread support should be enabled by default.
amends 4972fdb350
Change-Id: I5a4fc05219c9b2ff9c6e54fd444b4b94230727bb
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
And adjust configure.json files that were stale
Amends d385158d52
Change-Id: I851838a12c3773a6e8119ebc7f1de941ae7fe224
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Add SOLARIS cmake platform definition.
Add settings for QT_DEFAULT_MKSPEC so that qplatformdefs.h can be found.
Solaris has its gssapi symbols in libgss.
Solaris supports @ORIGIN.
Solaris ld does not support --dynamic-list needed for reduce relocations.
Make solaris fail the reduce relocation test.
getauxval is specific to GNU libc and some other libc implementations on
Linux but sys/auxv.h is not. The bootstrap uses sys/aux.h as the only
indication for getauxval. This breaks builds on Solaris, so only make
sys/auxv.h an indicator for getauxval on linux or glibc based systems.
Solaris uses X11 so add it to the X11_SUPPORTED list.
Solaris network libraries for sockets etc are in socket and nsl.
ifreq does not have a member ifr_ifindex on Solaris, it uses
ifr_index. Add test to check if ifr_index is a member of ifreq.
The first struct in the in_addr union on solaris is defined as four
uint8_t, therefore four arguments are needed for its initializer list.
Change-Id: Ieed4c1bbac8559a7ae1db9c4e1e91f609f150270
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Xcode allows building a project targeting either the device or
simulator sysroot in one single build dir, but for the sysroot
switching to work there should be no linker or compiler flags
referencing absolute paths of a specific sysroot.
During CMake configuration of a project targeting iOS, all found
system libraries will be within one single sysroot, either the device
one or the simulator one, whichever one was passed to
CMAKE_OSX_SYSROOT. CMake will then generate the Xcode project
and pass those absolute paths, which makes sysroot switching within
Xcode not work.
To avoid that, the CMake documentation recommends passing linker and
framework flags of the form '-lfoo' and '-framework bar' instead of
absolute paths. Xcode then takes care of setting the correct framework
search path.
Zlib is one of the libraries found in the iOS sysroot and thus passed
as absolute path.
To avoid that, create a new FindWrapZLIB find script. The target it
creates will pass the absolute path to the library on non Apple
platforms and an -lz linker flag on Apple platforms (macOS and iOS).
To avoid issues with target global promotion when system PNG package
is found, ensure that a found ZLIB::ZLIB target is promoted to global
manually in src/gui/configure.cmake.
Pick-to: 6.1
Change-Id: I8bd8649be4f680a331ad51925f27cb9d13ac5e5f
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
CMake 3.18 introduced the file(ARCHIVE_CREATE) API that we use with
COMPRESSION Zstd for compressing corelib's mimedatabase.
It's possible to build CMake without proper zstd support, and we have
encountered such builds in the wild where the file(ARCHIVE_CREATE) call
crashes.
Add a configure test to determine whether CMake properly supports the
Zstd compression method.
Fixes: QTBUG-89108
Change-Id: I37e389c878845162b6f18457984d4f73a265b604
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We need to feed gn with linker info for qtwebengine build.
Change-Id: I4bd96af8bb8a1927e4c03e5c5d4ade10a0876eb1
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Use the same approach we use for iOS, which is to set multiple
CMAKE_OSX_ARCHITECTURES values and let the clang front end
deal with lipo-ing the final libraries.
For now, Qt can be configured to build universal macOS libraries by
passing 2 architectures to CMake, either via:
-DCMAKE_OSX_ARCHITECTURES="x86_64;arm64"
or
-DCMAKE_OSX_ARCHITECTURES="arm64;x86_64"
Currently we recommend specifying the intel x86_64 arch as the first
one, to get an intel slice configuration that is comparable to a
non-universal intel build.
Specifying the arm64 slice first could pessimize optimizations and
reduce the feature set for the intel slice due to the limitation
that we run configure tests only once.
The first specified architecture is the one used to do all the
configure tests.
It 'mostly' defines the common feature set of both architecture
slices, with the excepion of some special handling for sse2 and
neon instructions.
In the future we might want to run at least the Qt architecture config
test for all specified architectures, so that we can extract all the
supported sub-arches and instruction sets in a reliable way.
For now, we use the same sse2 hack as for iOS simulator_and_device
builds, otherwise QtGui fails to link due to missing
qt_memfill32_sse2 and other symbols.
The hack is somewhat augmented to ensure that reconfiguration
still succeeds (same issue happened with iOS). Previously the sse2
feature condition was broken due to force setting the feature
to be ON. Now the condition also checks for a special
QT_FORCE_FEATURE_sse2 variable which we set internally.
Note that we shouldn't build for arm64e, because the binaries
get killed when running on AS with the following message:
kernel: exec_mach_imgact: not running binary built against
preview arm64e ABI.
Aslo, by default, we disable the arm64 slice for qt sql plugins,
mostly because the CI provisioned sql libraries that we depend on only
contain x86_64 slices, and trying to build the sql plugins for both
slices will fail with linker errors.
This behavior can be disabled for all targets marked by
qt_internal_force_macos_intel_arch, by setting the
QT_FORCE_MACOS_ALL_ARCHES CMake option to ON.
To disble it per-target one can set
QT_FORCE_MACOS_ALL_ARCHES_${target} to ON.
Task-number: QTBUG-85447
Change-Id: Iccb5dfcc1a21a8a8292bd3817df0ea46c3445f75
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
A few configure defines get changed:
QMAKE_WASM_PTHREAD_POOL_SIZE is now QT_WASM_PTHREAD_POOL_SIZE
QMAKE_WASM_TOTAL_MEMORY is now QT_WASM_INITIAL_MEMORY
QMAKE_WASM_SOURCE_MAP_BASE is now QT_WASM_SOURCE_MAP_BASE
device-option EMSCRIPTEN_ASYNCIFY=1 is QT_EMSCRIPTEN_ASYNCIFY=1
To create source maps for debugging. use
device-option QT_WASM_SOURCE_MAP=1
Task-number: QTBUG-78647
Change-Id: If9f30cd7fb408c386d6d69b5f7b1beecf1ab44b5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Needed for QT_FEATURE_foo checks in repos other than qtbase when
building SIMD specific files (e.g. qtimageformats).
Task-number: QTBUG-85447
Change-Id: Ibd2200fe24cecbb0b2a092f645ca622baf738601
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Setting a lib infix is not supported with framework builds due to the
nature framework of include resolution: includes like <QtCore/qstring.h>
won't work if the framework is named QtCoreInfix.
The combination framework build and lib infix was agreed on to be out of
scope in the comments of QTBUG-35604.
Pick-to: 6.1
Change-Id: Ib7c6983f2f64ea1a7cfcd56657d31eeab3f55fe3
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The generated code contained many repeated blank lines.
Most main()s were preceded by one, but not all.
Only include blank lines for actual empty entries in lists, where
configure.json specified them, plus one before main if anything else
precedes it.
Change-Id: I6e6c34940e08712a1aa848a3c9ad1b0fb5806d77
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The main(void) signature obviates the need for unused parameters and
has existed since (at least) C89; so use that instead of the
old-fashioned argc/argv arguments we don't use in any of these tests.
Change-Id: Ibfe850a1fce378673c9781011475ea623fd75ad4
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
At least, running util/cmake/configurejson2cmake.py changes these lines.
Adding them has provoked the script to add a .prev_configure.cmake file.
Change-Id: Idc123d1dee2ce51cd640c090c7910ecc1f0fc5a4
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Keep the c++2a feature, but make it an alias for compatibility
purposes.
Pick-to: 6.1
Change-Id: I6f153109be84659806f1b7a57a88a187875166d8
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Introduce the 'printsupport' feature to control whether the PrintSupport
module is built.
[ChangeLog][QtPrintSupport] Building of QtPrintSupport can be disabled
by passing -no-feature-printsupport to configure.
Fixes: QTBUG-90778
Change-Id: I8a9a4b7f8dd8f39a81565c8eb14ce1ae0839267d
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Nodir Temirkhodjaev <nodir.temir@gmail.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The AES and SHA features were checking for the wrong TEST_subarch_foo
variables.
Pick-to: 6.0
Task-number: QTBUG-87376
Change-Id: I46cd14d98832529aebac22cfcb01180330c5e091
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
When checking the value of CMAKE_INTERPROCEDURAL_OPTIMIZATION_<CONFIG>,
then <CONFIG> must be the upper case configuration name.
Also, we must not unset __qt_ltcg_detected, because the feature
condition evaluation happens way after the feature definition, and
__qt_ltcg_detected was not available anymore there.
This commit amends 96bdcdacbc.
Fixes: QTBUG-87874
Change-Id: I2b555bd1d7fbc8973e1d9493045c27d61b0d2c1b
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
They are disabled for the qmake build due to QTBUG-71990, but the issue
doesn't apply to the CMake build.
Task-number: QTBUG-71990
Change-Id: I6c659e9dbbc947fd3c6241f9fab2ea306c98020b
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Introduce a new feature called 'FEATURE_msvc_obj_debug_info' which
should allow usage of sccache for Windows MSVC configs.
Enabling the feature will replace the default '/Zi' compile flag
that CMake sets in Windows-MSVC.cmake with '/Z7'.
This ensures that the debug info is placed into the compiled object
file instead of placing it in the compilation .pdb file via
mspdbsrv.exe.
The final pdb file will still be created for shared libraries and
executables due to the linker '/debug' flag.
Static libraries will not have a .pdb file, instead the debug info
being embeeded in the .lib file.
The downsides of using '/Z7' are more disk space usage, slower
link times, more memory used for linking because the linker needs
to deal with more symbols.
The upside is that caching each indepedent cl.exe call is possible.
This is what Chromium uses with goma, and Firefox with sccache.
We're not enabling the feature by default to allow easier
testing (and switching it off) in the CI if it proves not to be
feasible.
It will probably have to be disabled at least for building
qtwebengine due to high memory requirements.
Task-number: QTQAINFRA-3934
Change-Id: I89e0e57995e938a780be318d1faec700194aa93f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Enabling it will force usage of '-O3' flag when building Qt.
If the platform has no '-O3' flag, use '-O2' as a fallback.
Task-number: QTBUG-86866
Change-Id: If13f7de954ba5c01dc9634f06a85529828fe90a9
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This option maps to FEATURE_reduce_exports. The feature is on by
default, except for MSVC. The reduce_exports configure test is not used
in the CMake build.
The <LANG>_VISIBILITY_PRESET and VISIBILITY_INLINES_HIDDEN target
properties are now explicitly initialized in the
qt_set_common_target_properties function, because we don't have access
to the feature in QtSetup.cmake where the CMAKE_<LANG>_VISIBILITY_PRESET
variables were set before.
Task-number: QTBUG-85373
Change-Id: I378453f0e0665731970016170302871e20ceb4e2
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
It causes issues in our Windows CI, because the strawberry perl
pkg-config is found. And even that one is unusable, due to a bug in
CMake which is tracked at
https://gitlab.kitware.com/cmake/cmake/-/issues/21239
Change-Id: I58816195d35459e8a44c923399c35a4956c222a2
Reviewed-by: Simon Hausmann <hausmann@gmail.com>
This configure switch sets the CMake variable
CMAKE_INTERPROCEDURAL_OPTIMIZATION_<CONFIG> per release config to ON.
The feature 'ltcg' is enabled if any of the variables
CMAKE_INTERPROCEDURAL_OPTIMIZATION,
CMAKE_INTERPROCEDURAL_OPTIMIZATION_<CONFIG> are ON.
In order to implement the check, configurejson2cmake had to be extended
to be able to write extra CMake code before and after the feature
definition. This extra code can be added to a feature mapping below the
keys "cmakePrelude" and "cmakeEpilogue".
Task-number: QTBUG-85373
Change-Id: Ia2eb907edcf087f137977a9b090705397f83eb05
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
If '-make examples -no-compile-examples' was specified, sources of Qt's
examples would be installed, but the examples would not be built.
This switch has always been a source for confusion and is only
interesting for distributors, who can just package the examples
directory tree.
Change-Id: I0291d70e4951d98b553a4abf217db49d05316d3a
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
The Android build for x86_64 fails with CMake. It should also fail with
qmake builds but the current multi-ABI build is testing the feature for
arm64-v8a only.
In [1], it's stated that AVX and AVX2 are not supported on x86_64 ABI.
[1] https://developer.android.com/ndk/guides/abis#86-64
Task-number: QTBUG-85982
Change-Id: I20c9366bdee2a13ca554ec67f5d0c041bd068b91
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The debug feature for the CMake build is solely determined by the value of
CMAKE_BUILD_TYPE or CMAKE_CONFIGURATION_TYPES. There is no point in
restricting the autoDetect expression to developer builds or MSVC and
macOS builds.
User-visible result: -DCMAKE_BUILD_TYPE=Debug now actually turns the
'debug' feature on, also for non-developer builds on Linux.
Change-Id: I65c92575c9483bff16beb78b60606c55aeadcece
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This configure switch controls the feature 'optimize_size'.
This isn't merely a mapping to CMAKE_BUILD_TYPE=MinSizeRel, because
we potentially want to combine -optimize-size with -force-debug-info,
which maps to CMAKE_BUILD_CONFIG=RelWithDebInfo.
Task-number: QTBUG-85373
Change-Id: I1a9343ebc54816f52e90e9d33ea3df4c99b1ec9f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The configure argument -qreal <type> maps to the CMake argument
-DQT_COORD_TYPE=<type>.
Fixes: QTBUG-83325
Change-Id: I94970f31ccfb241b1dd4f1d9b6cef25d6684dc05
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
There's no way that Qt 6 will be binary-compatible with Qt 5.1.
Change-Id: Ic1abfbdc8dc497dcb24494a8f3e2d96bcf27ef83
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
If certain 3rd party libraries have a version that's not suitable for
Qt, the configure summary should say so, rather than use them and fail
at build time.
With the current situation, we have to duplicate the version
information from the configure.json files in helper.py, by assigning
the version number as an extra find_package variable.
Rerunning configurejson2cmake then embeds this version info into the
qt_find_package calls in configure.cmake.
Some of the Find modules are rewritten to take the specified version
into account when looking for the libraries.
This involves moving around the code for creating a target, after
calling find_package_handle_standard_args() so we know if a good
enough version was found.
Task-number: QTBUG-82917
Change-Id: I139748d8090e0630cda413362760034dc3483e11
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
In Qt5, the -qtlibinfix option did not affect the naming of plugins,
unless -qtlibinfix-plugins was set. This option was added in
5641650993 to offer a way to have -qtlibinfix affect the plugin names
without changing the default behavior. We now remove the
-qtlibinfix-plugins option, as the old behavior is not desirable.
[ChangeLog][configure] The -qtlibinfix option now affects the names of
plugins. The -qtlibinfix-plugins configure option was removed.
Task-number: QTBUG-15192
Fixes: QTBUG-85439
Change-Id: I96f5c2577b76274929c431621967df0e9b4631b7
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This adds the CMake equivalent to the classical -device-option key=value
configure argument:
-DQT_QMAKE_DEVICE_OPTIONS=key1=value1[;keyN=valueN]
The keys and values get dumped verbatim into qdevice.pri.
This patch also ports the machineTuple configure test. Its result is
written into qdevice.pri as value for the GCC_MACHINE_DUMP variable.
Change-Id: I29f2323fd87639fafaed99ec7446c7ee75504705
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The change fixes the labels to show up correctly in the configure
summary.
It also allows enabling the sanitizer via the feature flags, e.g.
-DFEATURE_sanitize_address=ON.
Finally the qtbase sanitizer option is saved in QtBuildInternalsExtra
so that repos built after qtbase have the same sanitizer options
enabled.
Change-Id: Ic9d9e3ce3c7ebbc244ced2e6d163d1ac8ee06b12
Fixes: QTBUG-84721
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The qt_internal_apply_gc_binaries function should apply both compile
and link flags, not just link flags.
The flags should be applied publically to all consumers of Bootstrap
regardless if the gc_binaries feature is enabled.
The flags should be applied publically to Core only in case if the
feature is enabled (aka for static builds only).
Change-Id: Id42af0d9b527004d74c04eff2c9e3c2be1e76aac
Fixes: QTBUG-84461
Task-number: QTBUG-83929
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Macros and the await helper function from qfunctions_winrt(_p).h are
needed in other Qt modules which use UWP APIs on desktop windows.
Task-number: QTBUG-84434
Change-Id: Ice09c11436ad151c17bdccd2c7defadd08c13925
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
For modules that are not yet ported to CMake and that use
QMAKE_USE += libfoo
we need to provide the information about libfoo in the qt_lib_XXX.pri
files.
Also, we now generate qt_ext_XXX.pri files for bundled 3rdparty libs.
Task-number: QTBUG-75666
Change-Id: I9e4b057a197554ecb37c294c0bf09e2a2b3aa053
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The CI system can test this, but there's little reason to blow
up every developers compile time by 30%.
Change-Id: I7677b0411103fb1301ad087c884cc9bd22a5aee2
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This feature is Windows-only and must be turned on manually.
For MSVC it sets the MSVC_RUNTIME_LIBRARY target property.
For MinGW it adds the -static linker flag.
Change-Id: I9da3b88d545b34bc34a3a80301b2dd1b5986fa88
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This maps to the CMake variable QT_USE_CCACHE.
Change-Id: I3258027301284d907f6ecde6c65d2c0dde8f0a11
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This maps to the CMake variable CMAKE_INTERPROCEDURAL_OPTIMIZATION.
Change-Id: Id0ce48f176b95c27e74ab80276e89503b1660f79
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Instead of using CMAKE_INSTALL_RPATH to embed an absolute path
to prefix/libdir into all targets, use the more sophisticated aproach
that qmake does.
For certain targets (modules, plugins, tools) use relative rpaths.
Otherwise embed absolute paths (examples, regular binaries).
Installed tests currently have no rpaths.
On certain platforms rpaths are not used (Windows, Android,
iOS / uikit).
Frameworks, app bundles and shallow bundles should also be handled
correctly.
Additional rpaths can be provided via QT_EXTRA_RPATHS variable
(similar to the -R option that configure takes).
Automatic embedding can be disabled either via QT_FEATURE_rpath=OFF
or QT_DISABLE_RPATH=ON.
Note that installed examples are not relocatable at the moment (due
to always having an absolute path rpath), so this is a missing feature
compared to qmake. This is due to missing information on where
examples will be installed, so a relative rpath can not be computed.
By default a Qt installation is relocatable, so there is no need to
pass -DQT_EXTRA_RPATHS=. like Coin used to do with qmake e.g. -R .
Relative rpaths will have the appropriate 'relative base' prefixed
to them (e.g $ORIGIN on linux and @loader_path on darwin platforms).
There is currently no support for other platforms that might have a
different 'relative base' than the ones mentioned above.
Any extra rpaths are saved to BuildInternalsExtra which are re-used
when building other repositories.
configurejson2cmake modified to include correct conditions for the
rpath feature.
It's very likely that we will need a new qt_add_internal_app()
function for gui apps that are to be installed to prefix/bin.
For example for Assistant from qttools. Currently such apps
use qt_add_executable().
The distinction is necessary to make sure that relative rpaths are
embedded into apps, but not executables (which tests are part of).
Amends e835a6853b
Task-number: QTBUG-83497
Change-Id: I3510f63c0a59489741116cc8ec3ef6a0a7704f25
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Now that we have the 'shared' feature implemented we can easily port
the 'static' feature.
Change-Id: Ia9b54b68d532d73c3d62d12a86c9e8b83e7909c8
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We don't need the test, we can just check the value of BUILD_WITH_PCH
to know whether the feature is enabled.
Regenerate configure.cmake files.
Change-Id: I5691a22af2913bc398f99825e0c41cf2daf5a587
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Like libs, tools, examples, tests. Built by default means
they are part of the default make / ninja target.
Change-Id: I304e5724fc5dbd39626e9d589a6e1e92a4dd7882
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
QT_STATIC must be defined for static builds to have the right
import/export symbol macros defined. Originally, this macro is wrapped
in a condition. That's why we extend qt_feature_definition to be able
to write a prerequisite to qconfig.h.
Change-Id: I610e60acc7f5bdc031eff6d53a76e0b229a5c8c2
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This is needed for qmake mixing.
Change-Id: I368169606606a8de4dc8f2db5b98660a0a2fa349
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
We can ignore the tests for those features and directly ask CMake
whether the compiler supports the respective language version.
Change-Id: I31cd35493443fea0c6d0b0a5e641768c3bcbe736
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This prevents Coin from trying to automatically enable the framework
feature when no configuration is specified on the command line.
By default if no configuration is specified, and there's a .git
subfolder, "Debug" will be the chosen config, and that would conflict
with the framework feature, which would cause configuration to fail.
Change-Id: Ia9db3e8178794737692307b4662a2e77cc574ccd
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
For this, we have to uninline the separate_debug_info configure test,
because supporting the conversion of this in configurejson2cmake is not
worth the hassle.
Separate debug information can be turned on for a target by calling the
function qt_enable_separate_debug_info. For Qt's shared libraries and
tools separate debug information is generated if the
'separate_debug_info' feature is manually turned on.
Change-Id: Ic2ffc15efef3794dc0aa42f3d853ef6d651a751c
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
For the moment, in feature conditions that use STREQUAL, the lhs must be
a variable.
Change-Id: I56fe24baeb8067662ea81984fd48383da4c5b67b
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This feature is read-only and is ON if CMAKE_BUILD_TYPE is RelWithDebInfo
or if that value is in CMAKE_CONFIGURATION_TYPES.
It mainly exists for the qmake support.
Change-Id: I25cb57e832dcfcab100834a104b1a3d34f01086b
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This feature is read-only. It's controlled by the multi-config feature
of CMake. It mainly exists for the qmake support.
Change-Id: I322459598fe92568eda4d42319ded444537e95d4
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This feature is read-only and supposed to be set by BUILD_SHARED_LIBS.
It mainly exists for the qmake support.
Change-Id: I722b0de53211d0aab1924e45a77120c890f31f50
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This feature is read-only and supposed to be set by variables like
CMAKE_BUILD_TYPE. It mainly exists for the qmake support.
Change-Id: Ic7e32cbda0f3c2d92dd446b07a3bf1a8d85ec3b9
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
And in order to do this we must teach qt_config_compile_test a
COMPILE_OPTIONS argument.
Change-Id: I66fa45142b544e3a2fc599af1c1a4c69b442b318
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
As reduce-relocations implies bsymbolic_functions, we also add the
-Bsymbolic-functions linker flag.
Also, handle the .dynlist files that are passed to the linker by
bsymbolic_functions.prf in the qmake build.
Change-Id: I535c33fba888596d2f8975b16864bbe9f0a7caa4
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
A few things are needed to accomplish that:
- the python scripts do not ignore certain system_foo features anymore
(it is a hardcoded list for now just to be safe)
- configurejson2cmake now outputs
qt_find_package(WrapSystemFoo) calls for bundled libraries
(see below)
- the harfbuzz .pro file is modified to accommodate pro2cmake
not being able to correctly parse some conditional scopes
- the freetype .pro file is modified to make sure linking of the
library succeeds without duplicate symbol errors, which qmake
doesn't encounter due to magical exclusion of cpp files that are
included in other cpp files (presumably for include moc_foo.cpp
support)
- feature evaluation for Core, Gui, Network now happens in the
qtbase/src directory, so that bundled libraries can be conditionally
built
- for each bundled library there are now two FindWrap scripts:
- FindWrapSystemFoo which finds an installed library in the system
- FindWrapFoo which either uses the system installed library or
the built bundled one depending on a condition
- projects that intend to use bundled libraries need to link against
WrapFoo::WrapFoo instead of WrapSystemFoo::WrapSystemFoo targets
(this is handled by pro2cmake).
Unfortunately manually added qt_find_package(WrapFoo) calls might
still be needed as is the case for WrapFreetype and others.
- a new cmake/QtFindWrapHelper.cmake file is added that provides
a macro to simplify creation of WrapFoo targets that link against
a bundled or system library. The implementation is fairly ugly
due to CMake macro constraints, but it was deemed better than
copy-pasting a bunch of almost identical code across all
FindWrapFoo.cmake files.
- a qtzlib header-only module is now created when using bundled
zlib, to provide public syncqt created headers for consumers
that need them. These are projects that have
'QT_PRIVATE += zlib-private' in their .pro files
(e.g. qtimageformats, qtlocation, qt3d, etc.)
This is unfortunately needed due to QtNetwork using zlib
types in its private C++ API.
The change includes support for building the following bundled
libraries:
- zlib
- libpng
- libjpeg
- Freetype
- Harfbuzz-ng
- PCRE2
The following 3rd party libraries are still using an old
implementation within the CMake build system, and should be migrated
to the new one in the near future:
- double-conversion
- Old harfbuzz
The are a few libraries that are not yet ported:
- system-sqlite
- systemxcb
- maybe others
Among other things, this change allows building qtbase on Windows
without requiring vcpkg.
Task-number: QTBUG-82167
Change-Id: I35ecea0d832f66c1943c82e618de4a51440971a5
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Conflicts:
examples/widgets/graphicsview/boxes/scene.h
src/corelib/Qt5CoreMacros.cmake
src/corelib/Qt6CoreMacros.cmake
src/network/ssl/qsslsocket.cpp
src/network/ssl/qsslsocket.h
src/platformsupport/fontdatabases/windows/qwindowsfontenginedirectwrite.cpp
src/testlib/CMakeLists.txt
src/testlib/.prev_CMakeLists.txt
tests/auto/corelib/tools/qscopeguard/tst_qscopeguard.cpp
Disabled building manual tests with CMake for now, because qmake
doesn't do it, and it confuses people.
Done-With: Alexandru Croitor <alexandru.croitor@qt.io>
Done-With: Volker Hilsheimer <volker.hilsheimer@qt.io>
Change-Id: I865ae347bd01f4e59f16d007b66d175a52f1f152
Use all the original non-normalized feature names, and normalize them
in CMake land rather than Python. This gives us the necessary
original name information for further usage when generating qmake
pri and prl files.
Change-Id: If9db9028dac6175b8f6971e4b91558d76b8e9296
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Tested locally with the following configurations:
- iOS device builds (arm64)
- iOS simulator builds (x86_64)
- iOS simulator_and_device builds (fat arm64 and x86_64 archives)
All iOS builds currently require a custom vcpkg fork which contains
fixes for building the required 3rd party libraries.
qtsvg, qtdeclarative, qtgraphicaleffects and qtquickcontrols2
have also been tested to build successfully.
simulator_and_device builds are also supported, but require an umerged
patch in upstream CMake as well as further patches to vcpkg.
Task-number: QTBUG-75576
Change-Id: Icd29913fbbd52a60e07ea5253fd9c7af7f8ce44c
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
We cannot use a generator expression in an if statement, it does not
work. Instead, we could inspect the CMAKE_C/CXX_COMPILE_FEATURES list,
but unfortunately that's not reliable. For example it detects that ICPC
supports C++17 when in fact that depends on the installed libstdc++.
Therefore this patch revives our own configure tests.
Change-Id: Ic3bc5762fbe81837722523e3881ac16e84628519
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Note the following bigger things that had to be done:
Handle GSS library / feature with a new custom find module.
Implement rudimentary support for relocatability (does not currently
handle extprefix).
Change-Id: Ic6cd27dda7ebca9829f51cb42ea76fff6d1767ef
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
When a feature generates a private feature, we should not just repeat
the condition but also make it depend on the original feature. In qmake
features had different outputs, while we have a 1:1 mapping. For example
the developer_build feature had "private_tests" as an output feature.
There's no condition attached to the feature and auto-detect is off, so
we'd generate
qt_feature("developer_build" AUTODETECT OFF)
qt_feature("private_tests" AUTODETECT OFF)
and that's wrong, because when the user enables the visible feature
(developer_build) we want it to propagate to the private_tests feature.
Change-Id: Id8408864802fa1e1ed9e67a5f47d1d2fde38d321
Reviewed-by: Leander Beernaert <leander.beernaert@qt.io>
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The features are reused in qtdeclarative (and maybe somewhere else
too), so they should be present. We can still map the conditions
to proper CMake compile feature tests.
Change-Id: I4d307d29d4d293cc23ab005b195ea346087c7162
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
DBus1 (1.12) configuration file breaks PKG_CONFIG environment
variables and will thus prevent other libraries to be picked up
by pkgconfig. Main sympthom is that xproto is not getting picked
up anymore, which results in hundreds of lines of warnings about
this being printed.
Work around that by wrapping the call to find_package(DBus1) and
restoring the environment.
Change-Id: Ia69f10b014dddc32045b40972500a843e5d29b38
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Merge all data related to mapping libraries into one data structure
in helper.py.
Use that data for everything related to library mapping.
This change enables way more features now like e.g. adding find_package
calls into generated files.
Change-Id: Ibbd2a1063cbeb65277582d434a6a672d62fc170b
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Do not set properties of packages to type OPTIONAL. That is the default
anyway.
Update generator script and generated files.
Change-Id: I7a4d043b69c93ce8c2929a2e27ac6a07e4e6d8cc
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This change introduces a new function called qt_find_package()
which can take an extra option called PROVIDED_TARGETS, which
associates targets with the package that defines those targets.
This is done by setting the INTERFACE_QT_PACKAGE_NAME and
INTERFACE_QT_PACKAGE_VERSION properties on the imported targets.
This information allows us to generate appropriate find_dependency()
calls in a module's Config file for third party libraries.
For example when an application links against QtCore, it should also
link against zlib and atomic libraries. In order to do that, the
library locations first have to be found by CMake. This is achieved by
embedding find_dependency(ZLIB) and find_dependency(Atomic) in
Qt5CoreDependencies.cmake which is included by Qt5CoreConfig.cmake.
The latter is picked up when an application project contains
find_package(Qt5Core), and thus all linking dependencies are resolved.
The information 'which package provides which targets' is contained
in the python json2cmake conversion script. The generated output of
the script contains qt_find_package() calls that represent that
information.
The Qt5CoreDependencies.cmake file and which which dependencies it
contains is generated at the QtPostProcess stop.
Note that for non-static Qt builds, we only need to propagate public
3rd party libraries. For static builds, we need all third party
libraries.
In order for the INTERFACE_QT_PACKAGE_NAME property to be read in any
scope, the targets on which the property is set, have to be GLOBAL.
Also for applications and other modules to find all required third
party libraries, we have to install all our custom Find modules, and
make sure they define INTERFACE IMPORTED libraries, and not just
IMPORTED libraries.
Change-Id: I694d6e32d05b96d5e241df0156fc79d0029426aa
Reviewed-by: Tobias Hunger <tobias.hunger@qt.io>
In qmake there are at least 2 things to know regarding
sub-architectures and instruction sets.
Which instruction sets does the compiler know to compile for,
represented by the various config.tests and features in
qtbase/configure.json.
And which instructions sets are enabled by the compiler by default,
represented by the configure.json "architecture" test and accessed
via QT_CPU_FEATURES.$$arch qmake argument.
Before this patch there was some mishandling of the above concepts
in CMake code.
The former can now be checked in CMake with via TEST_subarch_foo and
QT_FEATURE_foo (where foo is sse2, etc).
The latter can now be checked by
TEST_arch_${TEST_architecture_arch}_subarch_foo
(where foo is sse2, etc and the main arch is dynamyicall evaluated).
The configurejson2cmake script was adjusted to take care of the above
changes, and the cmake files were regenerated as well.
Change-Id: Ifbf558242e320cafae50da388eee56fa5de2a50c
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The new files represent the json features more closely.
This helps with various build issues as well, like dynamicgl
feature not being present before.
Change-Id: I433592f48e0550700226a635492a3ce15af743c1
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
