The 'BUNDLEIDENTIFIER' key ensures that we generate an rfc1034
compatible identifier.
Change-Id: Ic5cefb8ae888d768dd793813e7ee3c23c9a5582a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
We haven't fully agreed on whether headers should be in $includedir or
not for builds with frameworks, since frameworks carry their headers
inside. However, this change came too late for Qt 5.1 for us to assess
the potential impacts -- it's known to break at least the cmake files we
ship.
So restore the build to the way it was.
This is a partial revert of 6d61dfdbb7.
Partial because the old behavior was partially broken: it did not
install headers for release builds. Now we always install (and in
debug-and-release mode, we might do it twice).
Task-number: QTBUG-32134
Change-Id: Ib84879c5a148d3717d16a7a90b2f5735fb5d80be
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
only the include statements found in public headers are constrained to
work with this flag. our own c++ files and private headers can use other
styles, which this flag breaks.
Change-Id: Icb1ced17dc438083731049788ac28349c87ba7ef
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
they are a somewhat different kind of private headers, but follow
generally the same logic.
Change-Id: Ic6f42ed7061dde2ffd0e32b1d713354b58a20970
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
We handle C++11 and libc++ through c++11.prf now, so separate mkspecs
are not needed. Deprecating them allows us to remove them in a later
release.
Change-Id: I4e525f445aeab88c926fa62cedef6aa9b32a7f55
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Erik Verbruggen <erik.verbruggen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
the entry for the normal headers already ensures that there is the
correct version symlink. having an entry for the private headers as well
is pointless, and in fact clobbered the symlink for the actual library.
Change-Id: I2403761bf006b7bfa490ce85c7b0e46d5ef203c0
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
There have been fixes done to the MSVC qplatformdefs.h that aren't
reflected in the ICC one -- specially the inclusion of
windows.h. Since ICC is never tested, simply defer to the MSVC one and
hope it's enough.
Task-number: QTBUG-30839
Change-Id: I3c22638cc7fac3399d3606b1583608e95208df6e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
the only case where we want to skip copying the bundled data (which is an
optimization only) is the debug sub-build when we are actually building
both debug and release.
Change-Id: I1f3f67ccd9a64033b133ffaf58639cd9f7107c27
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
i see no particular reason why debug builds should still get
"normal" headers.
Change-Id: I3625648549e8c234a365bab26823190ed2219cdf
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
there is no point in adding a structure we don't actually define.
Change-Id: Ica43123f17eca6ebd4b5b7ec2526ebabef31c82a
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
it's cleaner, and it makes it possible to actually have a single else
branch.
Change-Id: I5ef917b678e2bd5a2face8ee19e942e5e952aa80
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
don't mess with the -F linker flag manually. qt headers include other
headers via the canonical Module/Header syntax, which means that the
compiler also needs the -F flag. QMAKE_FRAMEWORKPATH does exactly that.
Task-number: QTBUG-29003
Change-Id: I5f4af1a462697cd6996c54436ccdb9fc2b216020
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
... except for MAKEFILE_GENERATOR = XCODE. This means the spec no longer
hard-codes g++, and will work regardless of whether the default spec was
clang or g++.
This require us to set QMAKE_XCODE_GCC_VERSION properly for GCC, so that
additional compilation flags passed by Xcode will match the actual
compiler used.
Task-number: QTBUG-31713
Change-Id: If65140a7471cd16f483036742f1d5b86d0485c52
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Otherwise doing stuff like -spec macx-g++ when the default spec is clang
will not have an effect on the tools used.
Change-Id: Ia2769abfdd8c19f79d427b9f09707430e736305a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
If Qt was built with C++11, it links to libc++, and we need all projects
that use Qt to link against the same library.
Technically, we could do QMAKE_LFLAGS += -stdlib=libc++, but that hasn't
been tested enough without also enabling C++11, so we keep the
relationship between the two for now.
Change-Id: Ic628bcbade60cc82f93707f372c2119c24d9dc8a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Liang Qi <liang.qi@digia.com>
The cmake variable for the mkspec dir must specify the source
location if used in the build dir, and must specify the install
location if used in the install dir.
Change-Id: I2fee8cd0c7198e9fc5cbb63972e20c75636672d1
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
the evaluator has the bug that function arguments are inherited.
work around that by passing an explicitly empty 3rd parameter to
qtAddTargetEnv().
proper fix upcoming in less critical branch.
Change-Id: Ic45cc890abaa6271985590d4ebe02c96bff6dec4
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
qtAddModule() always returns true anyway.
the real checking is done by qtAddModules() and qtAddLibrary() itself.
Change-Id: Ieed821acc36dc57ca52aec3e6b2dd6513be9b6c1
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
unlike the .command, the .depend_command is not executed by make via its
chosen shell, but qmake itself via the system's native shell.
consequently, it needs different path separators and no make-escaping.
Task-number: QTBUG-31289
Change-Id: I480f815753632db6e8d4725f463f8a1fc59680a6
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
nmake needs %-escaping in addition to $-escaping, not instead.
this has little practical impact, so it went unnoticed.
Change-Id: I144b6142eec0151d83a22e0ac5ead7b0415cdafa
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the vs ide executes the commands verbatim, so they must not be
make-escaped.
Task-number: QTBUG-31289
Change-Id: Ie73fd5c4da5527c2d10bc94ccdf60f8a1ca21351
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the precise syntax depends on what exactly the command is used for, so
we need to resolve it at the last moment. see followup commits.
This logically reverts commits 6f4ff81380
and 731e6bece5.
Change-Id: If285c91d7521069be86d32593b5c2ae2027b3038
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Change-Id: I840f963c3648d123b31f79aa2c8902c0ad74e982
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
instead, use the files directly from the source dir.
Change-Id: I03b728c66de6e03cade6dc153dcc78cea8e3f606
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
We can combine the hybrid and non-hybrid use-cases into a single static
library if we are careful about which symbols are included in which
object files. By limiting the main() and qt_user_main() functions to
their own translation units, the linker will only pick them up if they
are missing at link time (the user's program do not provide them).
This technique is resilient to the -ObjC linker flag, which includes all
object files that implement an ObjectiveC class or category, but will
fail if the -all_load flag is passed to the linker, as we'll then have
duplicate symbols for either main() or qt_user_main(). The latter should
not happen unless the user provides the flag manually, and in the case
he or she does, there's ways to work around it by providing less global
flags such as -ObjC or -force_load.
Change-Id: Ie2f8e10a7265d007bf45cb1dd83f19cff0693551
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Instead of force-loading the whole static library of the platform plugin
we tell the linker to look for the missing symbol qt_registerPlatformPlugin.
This symbol is provided by the same object file as the plugin's static
initializer, so the object file is included in the final binary and
the static initializer is run, resulting in the plugin registering with
Qt.
We could have marked the actual static initializer wrapper provided by
Q_IMPORT_PLUGIN(QIOSIntegrationPlugin) as undefined, but due to the C++
mangling this would look less intuitive on the linker command line than
the custom dummy function that we provide, which has C linkage.
Change-Id: I6805537e1f49260a41d48c555376964cb1fe75d8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
the commands are already quoted appropriately for the shell.
Change-Id: I746bb5fba2cd6548c5dc7ef81087c69a200ecbb8
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
in the actual specs, we also set 'gcc' for clang.
Change-Id: Ifc6b27d56596f34c944205795d665f545d090f80
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
These directories are not currently part of the Qt installation for mac
frameworks.
Task-number: QTBUG-31641
Change-Id: Ifef372cc2ebb692f9ae5a7b1f8dba5f683d1e7eb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This is actually a list in CMake, not a value to be prepended
to paths. Specify the QT_SYSROOT instead to root the location
of include directories. CMake will soon get a CMAKE_SYSROOT
variable which will replace this.
Change-Id: I239f69f127f3676a3835aa4f29638f44ef209819
Reviewed-by: Volker Krause <volker.krause@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
nonrelocatable adds the full uri to the exported type information
which is the correct thing to do for the qt plugins (and 99% of
the cases).
This way import bla.x 1.0 works correctly in the code model.
Change-Id: Ia06873dd8b2ea4627e3297a98e8df87275ceaf73
Reviewed-by: Alan Alpert <aalpert@blackberry.com>
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
make the include dir in the source tree the "main" include path, as
that's where the majority of the headers is. then selectively add the
shadowed dirs.
Change-Id: I03ad13cfcf77175c141b94d41b1221740d851faf
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
rename MODULE_PROFILE_DIR to MODULE_BASE_INDIR.
force MODULE_BASE_OUTDIR to be always the shadow of the above.
rename MODULE_BASE_DIR to MODULE_SYNCQT_DIR (the former is still
recognized for backwards compat with webkit).
the idea behind these changes is making the variable names and override
possibilities reflect their actual use.
Change-Id: Ica4062d7231a0ce13241670e0d0f43e6b1b97160
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
We'll use nm to get the listing of symbols in the next commit.
The -P option is "portable", which sounds like a good idea. I don't
have access to any of the commercial Unix systems, but I do remember
them printing a different format than GNU binutils's nm.
Change-Id: If6f80624bedaf2b1dabf608e16aa097d9910d739
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The generated cmake files expect only the names of libraries, so the
existence of directories causes erroneous fatal errors when attempting
to use Qt5Gui, if pkg-config returns a -L entry from
pkg-config --libs egl
Change-Id: Iec50b4be68ab643c3c02abce2435a98e69955138
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Iikka Eklund <iikka.eklund@digia.com>
all private headers are created by syncqt (and are thus in the source
dir), so we can simply override the normal (build dir based) paths
instead of extending them.
Change-Id: I9c1f3344c401b481b3f3d2295515f1aabffaa9a0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
these builds usually assume all headers in the qtbase build (== source
== install) dir, so the path for adding our pre-generated per-module
include paths needs to be triggered explicitly.
Change-Id: I57ec441d58cdf8186907ee6c36dce08daa206c49
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the logic in the configures was even trying to express that, only that
nowadays we always ship syncqt, so the tests were kinda pointless.
this frees us from the perl dependency for non-developer builds of
packaged modules (except for webkit, which needs almost every scripting
language on earth anyway).
obviously, this requires that the packaging scripts run syncqt in the
source dir before tarring up the sources. note that for repositories
other than qtbase, the -version argument needs to be passed to syncqt.
Task-number: QTBUG-29465
Change-Id: Ic929ab17a5de4b30fbf48b3aa9bfa3b4d2ef37d6
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
now that we split out the part that depends on the project file, we can
do it cleanly here.
this way we can generate these headers at pre-build time already.
and for git builds, perl is probably faster than qmake at this task.
Change-Id: I343255c6de22329471a3ae2c2aac9ebeb160a501
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
this will allow us the create the dependency list in a different way
than the rest of the master header.
Change-Id: Ib083fbbf6194cd9a161d669f860aaf32fd96d9d4
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
it would only cause trouble further down the line.
Change-Id: Ied9ba8a1ecf36b77e1091c73564bd7601ea6a6b4
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
there is no particular reason for it being done by qmake.
avoids that the logic is distributed over two source files,
and allows us to generate these headers at pre-build time already,
including not forwarding to a yet unexisting file (which would have a
yet unknown location).
Change-Id: I9c78ab425cf6f01d076c86fd1ee602626f231487
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Since the dx tool has moved in the SDK, we need to update our copy
of it to also search in the new location for dx.jar.
Task-number: QTBUG-31405
Change-Id: If093a9f51f33c5d8666919f516a3b336322a7169
Reviewed-by: Ray Donnelly <mingw.android@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Due to the way the DEX_CMD is formatted on Windows this would break
every time. Since we actually bundle dx.bat in the repository, there's
no need to check for its existence, so the easy fix is just to move
the existence check into the code path where it's run from the SDK.
Task-number: QTBUG-31405
Change-Id: If1aeb744d3abbd2488153b13aac401436965074e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Ray Donnelly <mingw.android@gmail.com>
this overrides the magic that makes examples only install their sources
in production builds.
packagers may want to force the build of the examples, so they can
package them up for demo purposes.
this is actually why we formerly had the split between demos and
examples ...
Task-number: QTBUG-30788
Change-Id: I5633f69404c5aa6846f5496e8f161a273a7a7da3
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Lisandro Damián Nicanor Pérez Meyer <perezmeyer@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Enables us to detect if a library should be added as a dependency or not.
E.g., libQt5MultimediaQuick_p should only be added as a dependency if an
application is using both QtMultimedia _and_ QtQuick.
Task-number: QTBUG-30861
Change-Id: Id62642c40e2ecca7149d249f65c7b0c950898374
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
In the recent revisions of the Android SDK bundle, the dx
tool has moved from platform-tools/ and into
build-tools/<revision-number> where revision-number is 17.0.0 at
the moment. To enable building on these SDKs, we add
detection for the dx tool and an environment variable which
can be set to override the revision number to provide a way
to build it against future revisions as well.
Task-number: QTBUG-31199
Change-Id: I0d6a22163dc2e50f7a81cd3fe8f3d53c6335aaee
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Change-Id: If7c724daa85df5e29e410b8deb4e69beb43ee8ea
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
... in mingw-using specs because msysgit
doesn't provide install.exe and Windows
doesn't care about Unix permissions anyway.
Task-number: QTBUG-31147
Change-Id: Ic8032ca1a970ef41381852b6c5c372b805a124f1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Change-Id: I1d745adfbae371f8f1f76e954be98f4c2fd962e0
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
it was only meant to automatically support syncqt.bat, which is gone
now.
fwiw, invoking batch files from within msys Makefiles was broken to
start with, as sh cannot directly run them.
Change-Id: I435568c578ce79e46f4e230e985ca9a04b34ffff
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
we never call it with an explicit extension, so this only complicates
matters.
Change-Id: Ib15180130359bb9575bf5dda564f8b817431618f
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
this makes it possible to directly execute perl scripts on windows.
Change-Id: Ibbb90d46518ea8ac4f695d07141700630b33fab3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
... and introduce -hostlibdir configure option for symmetry.
the libraries built for the host have no business in the target prefix.
in principle this code would even support dynamically linked host
libraries, but that's currently unused.
Task-number: QTBUG-30591
Change-Id: I8e600fa4911a020fb0e87fbf7ef2f35647c7c4d5
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Ivan Romanov <drizt@land.ru>
The Xcode and SDK settings are expensive to resolve, as we're using
system() calls to resolve them. We now try to detect the presence of
a .qmake.cache file (and inform the user that creating one would be
a good idea), and use the file to cache the various settings after
resolving them.
The Xcode logic had to be moved form xcode.conf as part of the mkspec,
into default_pre/post.prf, so that we could cache() the resolved values.
Task-number: QTBUG-30586
Change-Id: Ib5368cfee6f7e4a4a33f6be70d0e20d96896fe56
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Change-Id: Ida382a80dba882bbeb920756adc0c16321efe37e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The compiler defines _WIN32 for x86 builds.
The compiler defines _WIN32 and _WIN64 for x86_64 builds.
For consistency, the same should happen to the user defined macros
without underscore. The WIN32 macro is added in the win32-* mkspecs.
Task-number: QTBUG-30223
Change-Id: I342afed731f4ba253a2708b98f575039a04613d7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
For bundling Qt, we need two things:
1. We need to build a regular .jar file out of the Java files,
so that they can be built into the app package. Dexing the
classes first (i.e. compiling the JVM bytecode to Dalvik
bytecode) is required for loading the .jar file at run-time,
but cannot be used for building it into the app, so we need
two different paths.
2. We need to specify which extra files have to be bundled for
each module (this is primarily for plugins and imports). This
is because there is no static dependency on these files, so
it cannot be detected during deployment.
Task-number: QTBUG-30751
Change-Id: I733603ee5d1c64bd7c5b9357eb5d993b9d0298f7
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
this way we can use it for "regular" apps (gui tools) as well.
Change-Id: I3b00d0bde215dff1c2726b35626c4c0c256d92c2
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
there is at least one examples-only repo (qtwebkit-examples).
we look for tools/ only when src/ is also present, based on the
assumption that if there was only tools/, it would be actually named
src/ (like in qttools). the split between the two is nowadays arbitrary
anyway.
Change-Id: I982b1d0e26dd7d0a5de751546099a58f86390124
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the idea is that "tools" actually means "graphical applications". that
means that all bootstrapped/build tools are consistently built,
regardless of their location in the source tree.
non-bootstrapped non-graphical tools are a bit of a grey area. it's
going to be decided on a case-by-case basis.
Change-Id: I28b959b7e659d8aa86cf6769ab6d2689c855ec6b
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
There is no need to, and it confuses the generation of cmake files.
Change-Id: I00c8751990e707cf32652babcb9af3e4b681561a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Change-Id: I664c31d256d395d4afec81de66a84dc79ed10b9d
Reviewed-by: Volker Krause <volker.krause@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
There may be multiple libraries specified in the mkspec, such as
EGL and Mali, as used in devices/linux-sh4-stmicro-ST7108-g++, so
create an imported target for each one. Also populate the
Qt5Gui_EGL_LIBS variable with all created imported targets. Similar
variables are created for the used OPENGL implementation.
In the case of using the packaged ANGLE library, we already know the
exact locations of the binaries.
This makes it possible for third parties to use the same GL
implementation as used by the Qt build itself. As these are used only
privately by QtGui, they are also added to the DEPENDENT_LIBRARIES
of that target so that they are found for rpath-link usage.
On some platforms (eg Raspberry Pi), multiple include directories must
be set to include egl.h, as the headers it includes for vcos are a
bit scattered.
Task-number: QTBUG-29132
Change-Id: I1126da3d37cd51c88d3670347c8b6405b285efb5
Reviewed-by: Volker Krause <volker.krause@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
the warnings should have been acted upon before 5.0.
Change-Id: I20a4673d7ec80e0252aa39289c6718fe80799de7
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
If building angle ourselves, that's just the basic Qt include dir,
and if using an external gl, look for it in the places specified
in the mkspec.
As the qopengl.h header includes the gl header, this is a 'public
include dependency' of QtGui, so it is added to the relevant
variable and the INTERFACE_INCLUDE_DIRECTORIES of Qt5::Gui.
Change-Id: I8c2c1782e0a2600032771175444b087da28433fc
Reviewed-by: Volker Krause <volker.krause@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
In qtbase commit 7ac58d1ff0 (Make cmake
packages installed to /usr non-relocatable., 2013-02-11), we made
cmake config files non-relocatable if they were installed to
the /usr prefix. That was assumed to mean that this was a distro
or platform package, and was a workaround for the usr-move problem
on Fedora and ArchLinux.
However, cmake bug http://public.kitware.com/Bug/view.php?id=14041
showed that forcing absolute paths in this situation is not desirable
in cross compiling scenarios. CMake commit 6c613b433c45efb0bb013a6bd668cbb8ac740259
(Handle usr-move without forcing absolute paths (#14041), 2013-04-03)
addressed the problem in CMake, and this commit is an equivalent.
Change-Id: I065a6230bc618aa980fae6ca511ae10df4cd62c2
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
We now use an absolute path, to prevent picking up the wrong plutil binary.
In addition we pipe the possible stderr output of plutil and xpath to the
null device, so that the final QMAKE_MAC_PLATFORM_NAME will be empty in
case of any errors, and caught by the isEmpty() check below.
Change-Id: I8ad24bf63162a76410c2ae223dd2fc48e7886bbf
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Need to set MINGW_IN_SHELL to 1 and QMAKE_DIR_SEP to /
Change-Id: If470f1a4617555d6bc551e8cdf917779d0e64e62
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This way, the default generator is used when cross compiling
for mingw.
Change-Id: Ie536f1bca35ea38aec1232cdd95fc063c4f23e70
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Peter Kümmel <syntheticpp@gmx.net>
On iOS the compiler expects archs like armv6, armv7, armv7s when passed the
-arch flag, or when the ARCHS Xcode variable is set. Instead of mangling
QT_ARCH, which is used other places and assumed to match the values
provided by the arch.test, we use our own variable.
Change-Id: I05e10be8d69dd4d7cbcef04640fef99f1efb253d
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Qmake requires the information which extension is
used for static libs on a platform. As the ci for
windows ce is pretty new, this was not noticed before.
Change-Id: I45b0c9c59980cd352371c00aa59502e5a394e337
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Janne Anttila <janne.anttila@digia.com>
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
For now there's only one architecture per host/target, but
this will change once we start detecting the CPU features
for both device and simulator on iOS.
For convenience we set QT_CPU_FEATURES to the resolved
value of the current architecture, so that simd.prf still
can use QT_CPU_FEATURES directly.
Change-Id: I28e8b339a5c30a630e276165254dba09a3da6940
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Instead we pass the -force-load as a single argument to the linker,
which is not mangled/touched by either the Xcode or Makefile generators.
Change-Id: I72e17638f0a4a8308a352d4b2033c1b5a9b65b84
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
The property only needs to contain the direct include dirs of
a target. For example, Qt5::Gui does not need to contain the
include/QtCore directory because it already has Qt5::Core in
its LINK_INTERFACE_LIBRARIES.
Change-Id: I69612f42c29e6056b3d15399498d041d43a0dd6b
Reviewed-by: Brad King <brad.king@kitware.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Use the appropriate way to load the .pri file which also
checks for its existence before loading it.
Change-Id: I7d36da1593bb7fa1b5f6fd4d10b69e20c6aaa836
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
It should also have an effect for Visual Studio project files, not
just makefile generators.
Change-Id: I395071f09b29a6e8967a3d44e41d30480ae783f7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The correct CFLAGS are already present in gcc-base.conf, which is
used as a basis for g++, LLVM, and Clang.
Change-Id: Ic19e28edc55e109ecfe372826b295b817afcd36e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
We depend on Xcode for building Qt itself and user application on Mac OS.
The user may have an Xcode install that is not set up properly, in which
case we would fail compilation in mysterious ways. Instead we try to
detect misconfigured or missing Xcode installs as early as possible.
We try to detect if an Xcode install has not been chosen yet, and
if the user has not accepted the Xcode license agreement. We need to
do these checks both in configure, as early as possible, and in mkspecs
on Mac OS, as we need to error out if the user tries to build an app
with the Qt SDK, but with a broken Xcode install.
Change-Id: I4e3a11077a61dc5d4ee2c686d01044a9bb2c1c79
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
We always use the xcodebuild/xcrun/xcode-select binaries in /usr/bin,
as these will dispatch to the right binary based on what Xcode version
has been chosen using xcode-select -switch. This fixes an issue where
a tool was in the path from another Xcode installation. We can rely on
the tools as they are present on a clean Mac OS install.
Change-Id: I1d3cc1e92604f9be6d6f14639cb6322234edd696
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
xcrun will spit out errors to stderr and nothing to stdout if it fails
to find the tool in question. By checking for an empty return value and
skipping the sysrooting we guard against mangling the tool variable.
Change-Id: I68f59a6c8116696dd75cceed7b33ac666f3468b2
Reviewed-by: Eike Ziller <eike.ziller@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
These are the same for normal builds, but differ when cross-compiling Qt.
Change-Id: I75eccc6f4b67b440a08c4aba41aabb7df686c9f9
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This means we have to bump the deployment target to Lion (10.7), as the
LLVM 'libc++' C++ standard library does not support Snow Leopard (10.6).
For iOS the deployment target has to be bumped from 4.3 to 5.0, but we
don't enable C++11 by default yet as it's not tested enough on iOS.
Users who wish to deploy to 10.6 need to build their own Qt,
passing -no-c++11 to configure.
Change-Id: I7b5d20ab002db889d1091a4b7ff600f62caa7f06
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Change-Id: I1d8061302fbb8494b5ae31e20a644745fe969f10
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Brad King <brad.king@kitware.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
These variables are set by the ConfigVersion.cmake file already,
so no need to maintain them manually in the Config file too.
Change-Id: I73d949fb22052f4f6acbc1f70518e73f8fbf7c9c
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Fedora uses configure options to set the install prefix to a location
which does not contain the cmake config files. Rather than finding
dependencies from the installation prefix, find them in sibling directories
instead.
Change-Id: I06974e9655d0dda2a18064d0f9a33997cf2cb2d3
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Need to look in <android-sdk>/platform-tools/lib for dx.jar
Change-Id: I104cf157ce1795e907cca31b37c62163248b8d77
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
It's written to qmodule.pri by configure with a hard-coded path,
and hence need fixing up or appending, depending on which
exclusive builds are used.
Change-Id: I069c04438dc303868a76349c9bdd385adc074c0a
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Extra-compilers such as objective_c.prf may reference QMAKE_CXX, so we
need to sysroot it before it's used.
Change-Id: I1e367b3d0816096300a441786619f298134de0a6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
There is a bug in dx.bat in the Google Android SDK tool where
relative paths do not work correctly. We need to use our own
version of this tool until:
https://android-review.googlesource.com/#/c/52680/
..is merged.
Change-Id: I451a3239590919d014a673f3e8e17244e96676ab
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
In order to build Android Qt on Windows via
cmd.exe using the unix makefile generator,
mkspecs/common/shell-win32.conf needs
QMAKE_SYMBOLIC_LINK and QMAKE_LN_SHLIB
Change-Id: I1b3eded66cec06ab131f127c1d46b99124613561
Reviewed-by: Laszlo Papp <lpapp@kde.org>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
this is a qt specific option and really should not be hard-coded.
also, the implementation used undocumented api that is internal to the
bootstrapped process, which made it impossible to de-bootstrap it.
Change-Id: If706960671744e64a9a7c366437977a800a6058e
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
... like qt_tool does. otherwise we get linker errors with debug builds
on windows.
Change-Id: I583f277ff3fb75c9fe5f305a6f1b5d066b840c07
Reviewed-by: Debao Zhang <hello@debao.me>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Jonathan Liu <net147@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Instead of unconditionally linking to Foundation, UIKit, and QuartzCore,
we leave the dependencies for the iOS platform plugin, where the libs
are actually used.
Change-Id: Ie8cfad2c8230d1f1af6933b831e443fecb0c93f1
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Replace all tabs with proper space characters and consistently align
the '=' characters. The default alignment for the '=' of 25 characters
has been left as is to get a minimal diff. Lines with the '=' further
to the right and those belonging to 'proper code (TM)' have not been
touched.
The work was mostly done using the following python script (might
come in handy again...):
import sys, re
indent_eq = 25 + 0*4 # 25 characters was the most widely used indentation for the '=' character
p = re.compile(r'(\w+)[ \t]*([\-\+]?)(=$|= )[ \t]*(.*$)')
for fn in sys.argv[1:]:
with open(fn, 'r+') as f:
lines = []
nl_count = 0
continuity_indent = None
for l in f:
m = p.match(l)
nl = l
if m:
n_spaces = max(m.start(3), indent_eq - 1) - len(m.group(2)) - len(m.group(1))
if m.group(2) and m.start(2) >= indent_eq-1 and m.start(2) % 4 == 0:
n_spaces -= 1 # left-shift '+=' by one if the '+' is aligned to a multiple of 4
n_spaces = max(1, n_spaces) # we want at least one space before '='/'+='
nl = m.group(1) + ' '*n_spaces + ''.join(m.group(2,3,4)) + '\n'
continuity_indent = nl.find('= ') + 2 if l[-2] == '\\' else None # remember indent on '\\$'
elif continuity_indent:
nl = ' '*continuity_indent + l.lstrip()
if l[-2] != '\\': # check when to stop the continuation
continuity_indent = None
elif l.startswith('#'):
nl = l.expandtabs(2)
if l != nl:
nl_count += 1
lines.append(nl)
if nl_count > 0:
print fn, nl_count, len(lines)
f.seek(0)
f.writelines(lines)
f.truncate()
Change-Id: I1d2870d0a2fe2e30d398c140fe523e69dd20c81b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Used by features in CMake 2.8.11.
This matches the features in FindQt4 in that version of CMake,
namely that the IMPORTED targets contain the appropriate
INTERFACE_INCLUDE_DIRECTORIES and INTERFACE_COMPILE_DEFINITIONS
and that the qtmain.lib static library is automatically linked to
on Windows by executables. Additionally, the
INTERFACE_POSITION_INDEPENDENT_CODE property is set appropriately
if Qt requires users to use position independent code.
Change-Id: Ide341f43fcaf7d722a7bdf1a12b1071c7e548ccc
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This matches upstream changes on https://github.com/raspberrypi/firmware/
Change-Id: Ie28c2fa574d5cd097c033926970db40e8904e42e
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
This will likely fix some odd cmake related tests in the CI.
This reverts commit 316d8ececa.
Conflicts:
mkspecs/features/data/cmake/Qt5BasicConfig.cmake.in
src/corelib/Qt5CoreConfigExtras.cmake.in
Change-Id: Ib7714746f96bf12061d92242a42296d200c56c00
Reviewed-by: David Faure (KDE) <faure@kde.org>
The version number parsing needs to handle the reported version string.
Change-Id: Ifd34b2c86b21a1c5e4c91a43447468ca6feab8cf
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Replaced tabs with spaces to align with space-indented code
and removed some trailing whitespace.
Change-Id: I4930afc3df206ef8ee96de3e69f0d69fc4a1c77c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Added QT_NO_CLIPBOARD, QT_NO_ACCESSIBILITY and opengles2 libs.
Clipboard and accessibility are not supported in WEC7.
Opengl ES2 libs are required for building qtgui (and other opengl
dependent) modules.
Change-Id: Ie45612bd7bada00bfcb92a0885c4bd685b82bd02
Reviewed-by: Johannes Oikarinen <johannes.oikarinen@digia.com>
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This way find_package(Qt5Svg 5.1.0) will require Qt5Core 5.1.0 or later, for
example.
Additionally, forward the EXACT keyword to find_package dependencies
so that find_package(Qt5Svg 5.1.0 EXACT) will reject Qt5Core 5.2.0, for
example.
Change-Id: I302f5a3a683e6c36ef42f1e81c5f7e6258cf5624
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
otherwise we assume that the user is trying to build a random example
which just happens to live inside a qt module's repository.
Task-number: QTBUG-29756
Change-Id: I17f217b4235fbe04f2c49d1d92ce08b86bb259b9
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
this is cleaner than having it parse qmake project files.
the only remaining built-in version extraction is the fallback to
qglobal.h needed for bootstrapping.
as a "side effect", this fixes the build of modules with mismatched
versions centralized in .qmake.conf, as this was simply not handled so
far.
the -mkspecsdir syncqt option goes away, as there is no use case for it
any more.
Task-number: QTBUG-29838
Change-Id: I6912a38f0e93a26bc267a9e3d738506fd3ad431b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jocelyn Turcotte <jocelyn.turcotte@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Instead of first finding it and then testing that we can find it.
Change-Id: I1a1090693520b1d6adadef93839f25d277947e76
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Task-number: QTBUG-28540
Change-Id: I916d104c8aba551ee9a5b34da3fd85dcb26bbf64
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Remove all trailing whitespace from the following list of files:
*.cpp *.h *.conf *.qdoc *.pro *.pri *.mm *.rc *.pl *.qps *.xpm *.txt *README
excluding 3rdparty, test-data and auto generated code.
Note A): the only non 3rdparty c++-files that still
have trailing whitespace after this change are:
* src/corelib/codecs/cp949codetbl_p.h
* src/corelib/codecs/qjpunicode.cpp
* src/corelib/codecs/qbig5codec.cpp
* src/corelib/xml/qxmlstream_p.h
* src/tools/qdoc/qmlparser/qqmljsgrammar.cpp
* src/tools/uic/ui4.cpp
* tests/auto/other/qtokenautomaton/tokenizers/*
* tests/benchmarks/corelib/tools/qstring/data.cpp
* util/lexgen/tokenizer.cpp
Note B): in about 30 files some overlapping 'leading tab' and
'TAB character in non-leading whitespace' issues have been fixed
to make the sanity bot happy. Plus some general ws-fixes here
and there as asked for during review.
Change-Id: Ia713113c34d82442d6ce4d93d8b1cf545075d11d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
project files of bootstrapped modules can, just like those of
bootstrapped tools, benefit from automatic adjustment of QT (and
CONFIG).
Change-Id: I83815e69a2b105caaee0c2e2602828f8eb425eef
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
this affects only webkit when doing module-by-module installation, so it
went unnoticed.
Change-Id: Iab87f4a76fcb0fa9a1b1d6bcab9a73756e416120
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
QT_CONFIG is supposed to contain configure output, not a list of
modules. for example, enumerating modules is not cleanly possible if
modules are mixed with other flags.
the conflation was merely historical, due to webkit and phonon doing
it this way in the preliminary qt4 modularization.
we now have a much cleaner way to query modules (qtHaveModule(<module>),
or less recently, !isEmpty(QT.<module>.name)), which is already used
throughout Qt.
the old way was supposed to be removed for 5.0 already, but it slipped.
better do it now, before people actually start using it.
Change-Id: Iabdf0cdfaab9cd674f634f4c6ece105b2039c850
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
modules which demand it (i.e., qtwebkit) need forwarding pris, etc.,
even when not making a -prefix build.
Change-Id: Id405be8763e94cc074854f799bd785e9cdf62e8e
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Andras Becsi <andras.becsi@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
unlike unix' mkdir -p, windows' md complains if the directory already
exists. the workaround is a quite complex command, so the so far used
concept for assembling the command line from pieces was replaced with a
single template. for symmetry, adapt the makefile existence check to the
new concept as well.
QMAKE_CHK_EXISTS and QMAKE_MKDIR_CMD were added, with hard-coded
fallbacks (ugly).
QMAKE_CHK_FILE_EXISTS and QMAKE_CHK_EXISTS_GLUE (introduced in 5.0.0)
are simply deleted again.
QMAKE_CHK_DIR_EXISTS and QMAKE_MKDIR remain for legacy reasons, as qmake
emits them into the Makefiles, and custom commands may rely on their
presence.
Task-number: QTBUG-28132
Change-Id: I3d049cb5d26947e5c3d102d0c2da33afb2a95140
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Janne Anttila <janne.anttila@digia.com>
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
unlike the real compiler, moc does not have these directories built in,
so it would not find headers from a system install of qt.
Task-number: QTBUG-28870
Change-Id: I86f18cdc8953145190163746dae59f4e784f2d78
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Change-Id: I16e05b72e57473239b89498313ba7745ffa6a346
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
bootstrapping is only necessary if we are cross-compiling or have a
circular build dependency.
Change-Id: I17244457652ca9d4fc797043e57070c2ae3ee5d1
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Qt uses a lot of minor C++11 extensions such as long long, commas at the
end of enumerator lists, and extra ';' outside of a functions, and not all
of these can be silenced, so we build without warnings for C++11 extensions,
since we plan to enable C++11 at some point anyways.
Change-Id: I3ede2fb653c25475a3bd2b860c0c80c6cf6abef5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The 'silent' option to CONFIG will mangle QMAKE_CXX and friends by prepending
an @echo, which sdk.prf doesn't handle (it assumes the variables contain
names of executables, with optional arguments). Instead of teaching sdk.prf
generic command line parsing we ensure that silent.prf does its job at the
very end, when the tools have already had their paths fixed by sdk.prf.
Change-Id: I7093232e5cc37ed8106a3b838f42ad8f1a43fb86
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
For Mac OS X we currently specify build tools without an absolute path,
which means we end up using the ones in /usr/bin. This is wrong, we
should be using the tools from the toolchain of the chosen SDK.
For iOS we do specify an absolute path, by resolving the toolchain
path in the iOS makespecs.
To solve the situation on Mac OS X, we move the logic of resolving the
toolchain path to sdk.prf, and share it between OSX and iOS.
For configure we need to duplicate some of the logic from sdk.prf, as
configure pulls out QMAKE_CC and QMAKE_CXX for running some initial
tests and building qmake. The new macSDKify function also solves
the issue of missing sysroot and deployment version in the flags.
Change-Id: Ib1d239c9904cf3ccee5214b313cf6205869a1462
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
We now take advantage of the fact that xcodebuild -version allows you to
pass the key that you're interested in, to only print that single value.
This technique is used by Apple's own build scripts as well.
Change-Id: I57b8424590d4137a0e7f263a318e17ee2e0dfad4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
so far the assumption was that every qml plugin/module in qt is a
wrapper/extension of a corresponding qt module. this not the case for
the upcoming quickcontrols, for example.
Task-number: QTBUG-28200
Change-Id: If4b8bb6633e76b2a510908d09a010cee12d33634
Reviewed-by: Liang Qi <liang.qi@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
It is unused in the source code and replaced by Q_OS_LINUX,
Q_OS_ANDROID and Q_OS_ANDROID_NO_SDK depending on usecase.
Change-Id: If8d561540e7583fbac83c0f3506f219c4433e847
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Introduced Q_OS_ANDROID_NO_SDK which makes more sense than
Q_OS_LINUX_ANDROID when Q_OS_ANDROID also defines Q_OS_LINUX.
Change-Id: Id2aa228b66daffba82776a12c91a264a360afd86
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
We want the second member from 'Xcode 4.x', and $$first() gave us
'Xcode' instead of the version number.
Change-Id: Iaf0ed9dc89a03f7918290a61bddade82651ad0f6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
otherwise they would inherit it from qtbase, which may effectively
result in a lie if building against a different release.
for convenience we define the version centrally per repo.
qtbase is special, in that we use the version defined in qglobal.h to
avoid defining it redundantly (the instance in qglobal.h is currently
needed to bootstrap qmake; the configures would need some work to change
this).
Task-number: QTBUG-29838
Change-Id: Ie9a5b0ff0d64b69ff2d34af2f7c42d6278e957cc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The former applies both on Mac OS X and iOS, but 'macx' is specific to
Mac OS X.
ios.conf and macx.conf now share most of their settings in the common
mac.conf. We set the default QMAKE_MAC_SDK before loading mac.conf, so
that any overrides in the device config will apply afterwards. This
means configure's mkspec parsing will be able to read the QMAKE_MAC_SDK.
Change-Id: I0c7e26a6a0103e19b23ef152aa9e4ab461cee632
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
The only difference between the two is that iOS append @executable_path/
to QMAKE_LFLAGS_SONAME, but since shared libraries are not supported on
iOS anyways, this is not really something we have to care about.
Change-Id: I4797a4dfb94d9b3af03af22618351b98b48f8255
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
This is a step towards making mac a shared scope for both Mac OS X and
iOS, while macx is Mac OS X specific and ios is iOS specific.
We'll then move iOS to not include macx.conf, once we make the change
to not have iOS imply macx.
Change-Id: Ic9ce4d597873aa3cf2c981598354733e07db644d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
If there are minor differences later on we can put them in the
mkspecs' forwarding header and/or introduce a macx specific file.
Change-Id: I2a93107838e0d8434c0d444db3064e0a462fa656
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Based on the Necessitas project by Bogdan Vatra.
Contributors to the Qt5 project:
BogDan Vatra <bogdan@kde.org>
Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
hjk <hjk121@nokiamail.com>
Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Paul Olav Tvete <paul.tvete@digia.com>
Robin Burchell <robin+qt@viroteck.net>
Samuel Rødal <samuel.rodal@digia.com>
Yoann Lopes <yoann.lopes@digia.com>
The full history of the Qt5 port can be found in refs/old-heads/android,
SHA-1 249ca9ca2c7d876b91b31df9434dde47f9065d0d
Change-Id: Iff1a7b2dbb707c986f2639e65e39ed8f22430120
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
If the command is quoted, it can contain anything but quotes (we do not
support escaped quotes, so single quotes have to be used). If the
command is unquoted we look for the first closing parenthesis. We used
to do this using .*?, but the greedy modifier '?' didn't seem to work,
so we now use an inverse character set.
Change-Id: I40660ce7aef6a6b6d480292d28da1b079bb161da
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Instead of hard-coding the SDK and deployment target.
A host build will already use the host-makespec, so now that we
always build against an SDK, these mkspecs will have the SDK and
deployment target set.
Change-Id: I2b0343ae75f7de12081bab8346307b96b3883f62
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is enabled only for -developer-builds and only for certain
compiler-version combinations that are in a whitelist.
It also requires each library, plugin or tool to declare whether it is
supposedly clean of warnings. When most targets are clean, we can
consider inverting.
Change-Id: I17b5c4e45aee5078f9788e846a45d619c144095a
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
We don't want to hit the network, as a flakey network or slow server will
hang the XML parsing. We assume the XML is well formed.
Change-Id: Idc4898a925a46222954bf633a04ea9fe148c6797
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This file is now included by three types of Qt output: modules,
plugins (including QML plugins) and tools.
Change-Id: I5085f6ff37f70e9228303bf0520040adc2e2d7a5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
We need to figure out where to draw the line when it comes to warning
about unknown compiler (Clang), Xcode, or SDK versions, but for now
building with Xcode 4.6 should not be an issue. We'll have to revisit
this and test with the full set of compiler/Xcode/SDKs we support
before the final release.
Change-Id: Iac3ec3a25c0f7618b2c3714657d147f17f834d97
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
At some point we want to build with C++11 support, but for now we silence
the warning.
Change-Id: I40deb0925d459eaf06e324dddc0a2e9893c57615
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
configure.prf checks if MAKEFILE_GENERATOR is set
to something it can work with. ios/default_pre.prf
unsets MAKEFILE_GENERATOR.
This breaks QtMultimedia at least. Add special case
for iOS to configure.prf and set QMAKE_MAKE to "make".
Change-Id: Ie8feaeefe4a932d735a0cd4c09e869ca1341aae5
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Defining QT_QPA_DEFAULT_PLATFORM_NAME in qplatformdefs.h is not
neccecary, as qconfig.h will already have this define written by
configure.
Change-Id: I89d9191533f6b4e6bfd5eade6cc0dced02b50f81
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Change-Id: Ic04da6063863585665c9133caba0279ba478fbb4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Ian Dean <ian@mediator-software.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
In case they provide their own main that calls UIApplicationMain.
Change-Id: Ia050277ae5cbcbf01bc57b87ec37a74db9568059
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Ideally we'd only have to do QTPLUGIN += ios, but this doesn't work as
we need to link with the force_load linker option. Even trying to build
on QTPLUGIN and then replace the -l line with what we need will fail, as
the prl logic in qmake which runs after all the prf files does not know
about the force_load option and will then fail to resolve dependencies
from the prl file.
Since we load the platform plugin using -force_load, there's no need to
generate a cpp file that does the plugin import.
The main wrapper is not a real Qt plugin, and doesn't have an import
function that we can call, so we link it manually instead of relying
on QTPLUGIN.
Change-Id: I0381a3c9ed7f8d41a4121e1fc0b7c0e210a8b832
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
As long as Qt Creator does not provide any iOS integration, and the
app bundle we create using the Makefile generator is not good enough
to deploy to a device anyways, producing Xcode projects make the most
sense.
We base the decicion on whether or not the project depends
on QtGui and has app_bundles enabled. This prevents configure
tests and other tools from having Xcode projects, but allows
examples and demos to build out of the box.
Instead of setting the generator unconditionally we unset it in
default_pre so that we can detect if the user set it manually. This
means the user won't be able to inspect the MAKEFILE_GENERATOR variable
from the pro file, but this is less of a use-case then overriding the
generator from the command line or prooject file.
Change-Id: I881cf3e29631445f83ea4ff0979f7a566e4810f5
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
And use configure's -sdk argument to choose between the iphoneos and the
iphonesimulator SDK. xcodebuild -showsdks can be used to list the
available SDKs. Passing an SDK without a version postfix implies
the latest version of the SDK.
Change-Id: I881df754d522fc91aaa16ba3e39cf0c37a21a1f1
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Instead we deal with any differenced by setting variables in the top
level makespecs, that are used by the common makespec configs.
Change-Id: Iae1fb5fef8c95778511ed400008731989b446f3c
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
NEON detection is handled by configure's arch test, and THUMB2 is the
default for ARMv7.
Change-Id: I8ec3ce0ec6af9ad8d9509890aa1f8c87e18364d5
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
We now require SDK version 4.3 or above, and armv7.
Change-Id: I4766e277a3a4a32712bf2ec27fede694e8316c95
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
There's no need to duplicate the logic for device vs simulator. The only
difference is the iPhoneOS/iPhoneSimulator name.
Change-Id: I87c57fa785279a3ee258b76fdac8317e52e7daa2
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
We treat iOS as a variant of Mac OS, so for iOS both Q_OS_MAC and
Q_OS_IOS will be defined. This matches what Apple assumes in the
header file TargetConditionals.h
Change-Id: I55cc851401b748297478e4c32e84e0f6e1fdfc28
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We can use xcode-select -print-path to get the /Developer directory.
This also removes the need for the "legacy" makespecs, which only
differ from their non-legacy counterparts in the location of the
Xcode developer directory.
Change-Id: Ia9245033a4b82cc3933226bf998f07177b60871f
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Replace them with dashes, like Xcode itself does.
Change-Id: I302425363a2eef13394025cd4a9e414048ce55ce
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
There was quite a bit of cruft left over from older Xcode version. We
now produce Xcode 3.2 compatible files, similar to what Xcode would do
when asked to upgrade one of our generated files. In particular:
- Removed refType
- Set more lastKnownFileTypes
- Renamed defaultConfigurationIsName to defaultConfigurationName
- Add runOnlyForDeploymentPostprocessing = 0 to build phases
- Don't put buildSettings directly into PBXNativeTarget
- Don't write productSettingsXML
- Don't write startupPath
- Don't write name when path is the exact same
- Write empty buildSetting lists as empty string
- Don't write empty PBXBuildFile settings
- Don't write generated/neede filenames for PBXShellScriptBuildPhase
- Use PBXFileReference instad of PBXFrameworkReference
- Prune deprecated buildSetting variables
- Remove deprecated PBXBuildStyle sections
- Resolve correct CC/CPLUSPLUS/LDPLUSPLUS
- Write IPHONEOS_DEPLOYMENT_TARGET
Change-Id: Ia2365c2623fe898878bd10636c3b85145c1cff04
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Currently the Qt5_MODULE_TEST_DEPENDS variable is maintained individually
in each repo. This patch makes that obsolete.
Change-Id: I1a72bb4da70b9ace6f79296d6a3fb295eaa999ff
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
These will be used by ctest_testcase.prf.
Change-Id: I8a0e6e1eb110daba41b007c8309f3cb9a2059ecb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This is tested with eglfs plugin on the Yocto Project's Poky
distribution.
Change-Id: I73edd66d6cd62febb2f699ac5b1ca1f1c0dea449
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Introduce QT_OPENGL_ES_2_ANGLE_STATIC define for static builds
and modify export accordingly. Provided static instances
of gl::Current and egl::Current for Qt's single threaded
use.
Task-number: QTBUG-28196
Change-Id: Ia75699d6da103fb8dd9d5fe97c1ee51e48a74406
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
Allows us to dynamically generate the command line option for iOS later,
and allows the user to override QMAKE_MACOSX_DEPLOYMENT_TARGET with the
expected effect on the command line options.
We unset PERL5LIB to ensure we get the system Perl libraries, since the
Mac OS 10.6 CI machine seems to have a broken XML::Parser::Expat from
macports/CPAN.
Change-Id: I04430c7b1daf9452d72f9a04a6b7f8d0d6926884
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This way, the Release library is chosen if Qt is configured to
build both debug and release, and if the consumer configuration
is not an exact match for 'Debug'.
This means that RelWithDebInfo and MinSizeRel, which are 'standard'
configurations in CMake with mulit-configuration generators, will use
the Release version of Qt. All other configurations will also use the
Release version, unless MAP_IMPORTED_CONFIG_<CONFIG> is used as
described in:
http://doc-snapshot.qt-project.org/5.0/qtdoc/cmake-manual.html
and in the cmake documentation:
http://www.cmake.org/cmake/help/v2.8.10/cmake.html#prop_tgt:MAP_IMPORTED_CONFIG_CONFIG
Task-number: QTBUG-29186
Change-Id: Ifc11a9e19fcb304297c204e34a3b25c510329767
Reviewed-by: Brad King <brad.king@kitware.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This ensures that invoking the macro from a different module (operating
on a different target) is not possible.
Change-Id: Idbcd41d03172a8f1dcea26954464ab981fce8879
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Since we're only including the Extras file one time, invoking set() for
the include dirs again will overwrite the addition of include dirs in
the extras file.
We only need to populate these variables if not set anyway, so do that.
Change-Id: I04dad0674778e79c8c12c18231b8ce6c92edf881
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
this function is called only from library TEMPLATEs, and always with
exactly one word as the only argument.
Change-Id: I6282e3826791f89e6cf89dde625c8166e4e56028
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
these have no (useful) install target, so it makes no sense to reduce
the "build" to installing sources. suppressing the actual build can be
achieved with -nomake examples instead.
conversely, as the build dir is the install dir, people actually need to
be able to (selectively) build examples in there.
Task-number: QTBUG-29756
Change-Id: I98f34235442b552e51c0d5f5cec96a3eab4f1e7f
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Building against the local /System can cause build issues when for example
the headers have not been updated to reflect the system version. The system
headers are updated as part of installing the command line tools from within
Xcode, not as part of the system update process, so we might think we are
on 10.8, but the system headers will not reflect that, and we get build
breaks. It's preferable to always build against an SDK, so that we have
a known state for the OS X libraries and headers.
We choose the latests SDK by default, as recommended by Apple.
Change-Id: I79028217ff3a9cbe45aa4cb05ed6dd90388dee50
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Instead of setting -isysroot in both arch.test, compile.test, the various
mkspecs, and sdk.prf, we now propgate the chosen SDK as the qmake
variable QMAKE_MAC_SDK, which is then handled exclusivly in sdk.prf.
The QMAKE_MAC_SDK variable, and -sdk argument to configure, is expected
to be of the short-form name, eg macosx or iphoneos, not a full path, as
that's what Xcode also expects. We take care of translating that into
a full path for -isysroot/-syslibroot in sdk.prf, using xcodebuild as
a helper.
Change-Id: I281655b2fa5180c6e78ffdce36824e4a91447570
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
... instead of as a fallback in default_post.
it was this way in qt4, and it requires less code to be written in the
end. we are already doing it for debug/release as well.
Change-Id: I6e02849d61d14a18375cf64a5990768931ebac48
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
all tests that happen after default_post loads resolve_config can rely
on debug vs. release, static vs. shared, and staticlib vs. dll being
properly "de-conflicted".
Change-Id: Ie0b4defcd6024bd1c25f53ba7e03621052d96492
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the current approach of having "free-flying" prf files for such a core
issue is rather insane. this was noticed early on, as evidenced by the
forcible loading of debug/release/debug_and_release in default_post.
however, things remained a mess, in particular static vs. shared.
consequently, the commit merges all related feature files. the actual
config resolution is put in a separate feature file, so it can be loaded
by resolve_target if that happens to be loaded early on.
Change-Id: Ie30e7c63cabe9409a3263ca1650e323a870926f2
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The linker from the BBNDK needs -rpath-link to resolve
transitive dependencies, like on Linux.
Change-Id: I85726841ea15070e8661b9bdbffaf950fdd247e9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Qt5 requires Mac OS 10.6, so we can remove checks such as
if MAC_OS_X_VERSION_MAX_ALLOWED >= MAC_OS_X_VERSION_10_6
Change-Id: Iea21727a277291148704ecf9677ed0b68c24920f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
it differed from QMAKE_LIBS_OPENGL only for the irix/sco/unixware -cc
specs for not entirely obvious reasons. as all these specs are obsolete,
remove it.
Change-Id: I7d50ffa11ff830371ea52c9ebe25e1f1bc56b307
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
there is mightily little point in unsetting variables right before
unconditionally assigning to them.
Change-Id: I24c1814ce38bf9aab4496679b1a670f3cd55c536
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
If Qt is configured with -libdir /some/dir/outside/the/install/prefix/,
then for use absolute paths for the executables and include dirs too.
Change-Id: I5ccf62be6f93f97d934df62038fe4cd40dca9a93
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
all non-installed tools are properly registered, so they don't need the
fallback. conversely, we can assume that non-registered tools are
already installed.
this enables us to build docs in qtbase after an incremental
build+install up to qttools.
Change-Id: I95a55f6b84e01885bcf6dd656caf0dd2b679bb73
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
This is the <prefix>/include directory which is independent of the
module and which only has to be used once. As everything uses QtCore,
it is enough to set it only there.
The CI system is a special case, in that it tests things before
installation. Handle that case too.
Change-Id: Idcdf9617e199b7d490cb3553cce07f1f464b3bec
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
As the Extras file can do things like append to a property (as in
QtCore for include directories), that is something that should be
done only once when the QtCore target is first defined.
Change-Id: I5163912bccfda1ff43a02eb01f67ac59e6f6b24b
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
the pkg-config file names follow the TARGET by default. as we create
frameworks without the major version infix, all references to Qt5* would
be invalid.
Task-number: QTBUG-29453
Change-Id: I82e7de017a8f17f7d2d7b4a2a61a180125ca29a0
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
it's not used for anything other than display, so we can put a space
there.
Change-Id: I77e156856efeaaa964ff3bf2369bcd5586bac7c6
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
there is no point in duplicating the information in every module.
host_bins is exported only here as well.
Change-Id: I2f816e1cade9761a2c0d97c7ca1c90293095bfb1
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
users need access to the Qt configuration, not some internals of
module's build system.
Change-Id: Ife3f668282969d444282d57152c11ed0f741076f
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
-rpath does *not* imply -rpath-link when x-building:
ld(1): "Searching -rpath in this way is only supported by native linkers
and cross linkers which have been configured with the --with-sysroot
option."
it doesn't hurt to have the "excess" -rpath-link for native builds, so
just remove the cleanup.
Change-Id: Ic39c1f4d6c2e3770d43a5ed3e56cf89a146edf85
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
if the libraries are in a non-standard location, but no rpath is used,
rpath-link is needed. this is often the case for non-prefix builds
(which have no forwarding pris any more).
as we cannot store absolute paths in the final pris, we need to store the
module names, and resolve them only at use time.
Change-Id: I1538b5d531611c76a2d7058a3b2ff683bdcbe427
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
as everything is built inside the common build/install dir, there is
no point in the fwd pri stuff.
as a "side effect", this makes it more straight-forward to relocate
non-prefix builds, which is the default on windows.
Task-number: QTBUG-28827
Change-Id: I010246a9ad87cf74974dc168768b1a8625f73260
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
move the regular pri file creation into the "sub-prf" and rename it
accordingly. the original reason for the split was the deep magic in
activeqt (and phonon), which is gone now.
Change-Id: If40e941afc9293725630ed6bcf3e4ef18a692f66
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
-developer-build enables an actual build of examples, based on the
assumption that developers want to test it (it can be still disabled
with -nomake examples). regular users otoh want only the examples
sources installed.
Change-Id: Ifc6a108099929175a3960480802b271a758fdd38
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
we need to collect the sources of the install targets for the check that
all files have been properly handled, but of course we must not add these
files to the source install target, as that would mean double installation.
Change-Id: I6acb56f2a993b6ed81d1031d5dc0a0da30a53b54
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Curiously, qmake could fix .prl and .pc files for unix, but only .pc
files for MinGW. qt_module.prf seems to have known this.
Task-number: QTBUG-28902
Change-Id: Ice9983a69813690c0d4b96ca11589440182569a0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Fully modular prefix build now puts the includes and libs into each
module's own builddir, so the else branch was simply bogus. Replaced
the else branch with the real base for modular builds. This allows
the paths to be successfully replaced when installing metafiles.
Change-Id: I056a923288965b560a4e9b0ba7add1aac912199f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
otherwise qmake will just take TARGET and lowercase and capitalize it,
which not only looks weird, but also does not match the Requires: fields
we generate.
Change-Id: I4a070ff256fffd2b780acb0361d4213d0032dbb9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Dihan Wickremasuriya <nayomal@gmail.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
This is a less error-prone way to calculate relative paths.
Task-number: QTBUG-29110
Change-Id: If4509ef278e48dcf08bdcc904d21534b4c05993f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The header location for SurfaceComposerClient.h changed between Android
4.0 and 4.1, so we need to select based on the major and minor version.
Change-Id: I7a6408f8ba3c644facca3a7e64b8d68fde9c4472
Reviewed-by: aavit <eirik.aavitsland@digia.com>
Reviewed-by: Rainer Keller <rainer.keller@digia.com>
By using FramebufferNativeWindow Qt can render directly without going
through the SurfaceFlinger compositor.
Change-Id: I0538fca9f2e905c076ff5837dd73589ee9c632ca
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
The platform specific CFLAGS, most notably -march=armv7-a, were only
added to QMake's _RELEASE flags but not to the _DEBUG flags.
This then resulted in strange compilation errors such as this one:
http://qt-project.org/forums/viewthread/22141
Change-Id: Ib47996c6946b043294437e8543827da270df836d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Cross bulding on unix for mingw exploits the fact that makefiles
generated for mingw work with plain make. There is no mingw32-make, so
this is the only option.
Arguably, plain make could also be used in an MSYS environment,
perhaps detected by MINGW_IN_SHELL, but there might be good reasons I
don't know about not to do this.
Change-Id: I694c74046a307c2887af1c30cca36f95e242adc1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
this is much more elegant than the so far propagated !isEmpty(QT.foo.name).
also replace feature-specific tests (no-gui and no-widgets) and the
obsolete contains(QT_CONFIG, foo) syntax.
Change-Id: Ia4b3c8febcabf9eeca67b1f9173a523820b1038b
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Reviewed-by: Tasuku Suzuki <stasuku@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Fix MinGW build errors by using the standard main signature.
Change-Id: I0ebe7307a825a7ec50e654f163fbf8fe7060a478
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Generalize the check for gui by checking for needs_qpa_plugin
CONFIG value instead, which gui adds to MODULE_CONFIG.
Task-number: QTBUG-28215
Change-Id: I5834a3f81e5c3868ee1a3fa405ebc6410db1f900
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Using some modules requires importing static plugins also for shared
libraries (namely QtAxServer), so provided a way to force plugin
imports even for non-applications using force_import_plugins
MODULE_CONFIG value. This required moving the plugin handling after
qtAddModules calls in qt.prf.
Task-number: QTBUG-28215
Change-Id: Id6bb92ed7c078cc8c54538ddc9bb8e8ad316f277
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The location of the mkspecs directory comes from the archdatadir, which
distros will all set.
Change-Id: I20dbdce76db13dbd37eec065009e215f98985907
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
qt is already added by spec_pre.prf, warn_on and depend_includepath by
default_pre.prf.
Change-Id: Ic00e0ba496d698ed9659c476f2ca99fc0f86a093
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
When building Qt static, plugins get module .pri file, but those files
do not get installed in Windows. This is because both .pri generation
and install target statements are scoped with !build_pass, which means
Makefile.Debug and Makefile.Release do not get install_pritarget
target.
Fixed by doing only the .pri generation in !build_pass scope.
Task-number: QTBUG-28606
Change-Id: If3f49b578af1d9171a8bce67793ecb3f902a6da8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
it's the very antithesis of modularization to do it.
Task-number: QTBUG-27722
Change-Id: I2540e1a70e67b55420246d0c209314c05c65a85f
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The variables these files refer to are not set anywhere anymore.
The Unix thread.prf file is still needed, as it is still effective and
is activated by qt.prf.
Task-number: QTBUG-25106
Change-Id: Ia514192d28785205df3710d78ee597285d4136b0
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
rpath is meaningless for static libraries.
and windows has no concept of rpaths to start with.
Change-Id: Ia02bbdfbf7112e7082175c3051c0839ac0900f57
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Since all gui applications already need some QPA plugin added,
we might as well add the default plugin and generate the code
to import the plugins automatically.
User can opt out from the automation by removing relevant
items from CONFIG variable: link_qpa_plugin or import_plugins.
Task-number: QTBUG-28131
Change-Id: Ic171c363464c099143374d3e39bcc28f6edf73d2
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
generally, don't install anything from the top-level examples dirs
automatically. the global README and the aggregator examples.pro are
installed explicitly.
Change-Id: I5f6b8760f37d917b800fa85979896a471778cac0
Reviewed-by: hjk <qthjk@ovi.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the feature was backported to qt 4.8, and people apparently started to
rely on it. it doesn't add too much overhead when not used, so enable it
by default again.
Change-Id: I15890027603ede733347f2c05b36ad1389c649cf
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Reviewed-by: Nikolai Kosjar <nikolai.kosjar@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
so other modules can actually re-use the code without referencing qtbase
sources.
Change-Id: Id66f07b476e539273dd32455e7642a17d7e5d0ef
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Configure will now generate QT_DEFAULT_QPA_PLUGIN qmake variable
to specify the default QPA plugin.
"CONFIG += qpa_default_plugin" statement in application .pro file
will add the default QPA plugin into QTPLUGINS.
"CONFIG += qpa_minimal_plugin" statement in application .pro file
will add the minimal QPA plugin into QTPLUGINS.
Task-number: QTBUG-28131
Change-Id: I12a241005f30b37467d783b50f0369b47e605e68
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Platform plugin is needed always when gui is linked to an application.
This is tedious to do manually for static builds, so provide support
for generating a source file that imports static plugins for
application projects.
"CONFIG += import_plugins" statement in application .pro file will
generate required import statements for all plugins specified with
QTPLUGIN variable.
The plugin class names are found from plugin's module pri generated
automatically when plugin is built, as long as the plugin specifies
the PLUGIN_CLASS_NAME in the plugin .pro file before loading
qt_plugin.prf.
Task-number: QTBUG-28131
Change-Id: I19f8ea48a3c1e9b5c81f4399c4b5d439a6d4bea1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Usage of QTPLUGIN implies static Qt, so only handle it when that is
true so user projects do not need to scope it if they support linking
against both static and shared Qt.
Change-Id: I011b4672bac122d7d64d8f2fc0e41ca7e5251dfc
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Since QTPLUGIN variable values are used to locate both the plugin
library and the module pri file, those must match. Therefore generate
module pri file name using the TARGET of the plugin rather than the
pro file name.
Change-Id: I9ec6f2a087ba3b3cecf7034c8a28b31df155cd97
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
there will be more template data, and it wouldn't be too nice
to spread it all over mkspecs/.
Change-Id: I909c48d26ac34f8c0f66051a65d326366d49c096
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
this should have been in 048b697c07.
Change-Id: I8589453ef937db1a9a446b0e5d01bb830b0cf6b0
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This follows the same logic used to set bsymbolic_functions.
Change-Id: I9300eab8a1b6673c4409b5dd07b40123fdf00d69
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The contents of this eventually go into a CMake target
property IMPORTED_LINK_INTERFACE_LIBRARIES, which seems to expect
sorted input. Usually the contents is generated by CMake itself,
so generating content it expects is reasonable.
This fixes the qtactiveqt cmake unit test with MingW on linux.
Change-Id: I2a540bea5c3ac214ad4e1dfedfb7cbd2f863472b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
now we may get files with several mentions of the same lib/include dirs
on the same line, but that's essentially a non-issue.
Task-number: QTBUG-28336
Change-Id: I8204086420b82015f62090ae0a56908ce0cccee8
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
this seems more generic, and allows for more substitutions inside the
generated files.
Change-Id: I7a2e37036f9f9f7dbf7f28f0976ef427dd28ee82
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the "export location" of the linguist tools was just bogus, and lconvert
was missing anyway. the two dbus tools and qdoc were missing, too.
generally, it seems useless to report the paths of some random tools -
instead, just report the install location of the host binaries and let
users figure out the complete paths themselves - this should be ok, as
we decided that distributors are not supposed to do tool renaming any
more.
for the binary path just use the final location, as the files won't be
used before installation anyway. this allows us removing the scary
generic prefix replace from the pc file installs.
and as a side effect this also fixes debug_and_release builds of core
and widgets by not loading various prf files prematurely and thereby
messing up the dir replacement magic.
Task-number: QTBUG-28286
Change-Id: I99de419301fc07fb923959db4bd5cab9072d1c31
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
in particular for the meta Makefiles of debug_and_release.
the logic is as follows:
- the meta targets ('html_docs' in prepare_docs mode, and 'docs' always)
need to branch out asap, so they are implemented non-recursively in
every makefile.
- all other targets need to be fully recursive. the meta Makefile will
recurse only into one of debug or release, depending on the configure
option (it doesn't matter anyway).
Change-Id: I4e3f714cdda9c3a1021743148b5ee73379e3484d
Reviewed-by: hjk <qthjk@ovi.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
there is no reason why something should break out of the system.
Change-Id: I081bffc0927b43ac4940d0200e32e1e60f6f2e97
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
complementary to QMAKE_RPATHDIR. this avoids that we need to sprinkle
linux/gcc specific code all over the place.
Task-number: QTBUG-27427
Change-Id: Iebafd1749d1a0d803704902473df8c743f074ddc
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
all modules have been migrated to auto-generation
Change-Id: Ie7b3ebfd735a22f8e0b0339909b6385508d7a6b3
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
turns out that some modules need a lot of work, so make it opt-in for
the time being.
Change-Id: I16365e3d96adab98a1bc748907dbd67488dfad5f
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
instead of letting *every* qmake-based project have recursive check target,
let interested projects "subscribe" to it by adding CONFIG+=testcase_targets
in a central place (.qmake.conf, which Qt itself does via qt_build_config.prf).
Change-Id: Ib13fdd2d3a1adee0c5ad02b6b176a664c583bf9d
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Also change Trolltech for QtProject in other places
Task-number: QTBUG-23269
Change-Id: Ie4e344f23cab77c575562d18b481b3369ce30491
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Add a 'd' to debug builds to allow both release and debug builds
to be used.
- Add .def-files for Debug
- Build all libraries debug/release
- Add description to README.qt
- Differentiate debug/release in qmake.conf.
Task-number: QTBUG-28196
Change-Id: Ib3081004a6ed2ad71d353244154684d2e0ebbc86
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
QAxServer projects must not link qtmain.lib.
This awful hack was adapted from the old qaxserver.prf
Change-Id: I78b4cbf6714bfbd88341449b9230f1989cff8a6f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
we directly expand $$TARGET on the same line, so just do the same with
$$VERSION
Change-Id: I3601bfcc835b13f63dce43d00cfe8d34ded60b21
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
we are assigning QT.*.VERSION from VERSION a moment earlier
Change-Id: Ie4d51f8835b8050755bc399a1a597967c8e3e499
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
ActiveQt needs this, and it sets the no_module_headers flag.
We still need to set the include_dirs variable in the
no_module_headers case, so that its dependencies are added to it.
Change-Id: I2cad5ee792eed51d36b7c8e2c616763516a5fc10
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
it's confusing for the users if the examples' project files contain code
to install their own sources. also, this constitutes an enormous code
duplication, and lots of mistakes. consequently, automate it.
more or less as a side effect, this also removes the entirely meaningless
target installs in subdirs projects.
Task-number: QTBUG-28184
Change-Id: I9fc1367a06db9e2c46aeb67d68729a4f67163ef9
Reviewed-by: hjk <qthjk@ovi.com>
