... and make use of it in qt.prf.
[ChangeLog][qmake][Unix] Added support for relative paths in
QMAKE_RPATHDIR.
Note that this technically breaks backwards compatibility, as relative
paths were previously silently resolved against $$_PRO_FILE_PWD_. This
was not documented and seems rather useless, so i'm not worried.
Change-Id: I855042a8962ab34ad4617899a5b9825af0087f8a
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Jake Petroules <jake.petroules@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
at least the mingw version we use now interprets the sequence \# as a
literal hashmark, which completely defeats the previous hack.
the new hack escapes the backslash with another backslash, which appears
to work. however, make does *not* remove the additional backslash, so
the result is a bit ugly.
Change-Id: I591a2be443880b162094d04e5a5e624216b59311
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Suffix rules are the old-fashioned way of defining implicit rules for make.
We don't need them as we generate explicit rules for all sources we build.
[ChangeLog][qmake] Makefile output no longer contains implicit
suffix rules, as all sources are built using explicit rules.
Change-Id: I4ecfa5b80c8ae33aea8730836f3baf99dd4951dd
Task-number: QTBUG-30813
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Instead of lumping both Objective-C (.m) and Objective-C++ (.mm) sources
into the same pile, passing them on to the same compiler as for C++ (CXX),
with the C++ flags (CXXFLAGS), we follow Apple's lead and treat them as
variants of the C and C++ languages separately, so that Objective-C
sources are built with CC and with CFLAGS, and Objective-C++ sources
with CXX, and CXXFLAGS.
This lets us remove a lot of duplicated flags and definitions from the
QMAKE_OBJECTIVE_CFLAGS variable, which in 99% of the cases just matched
the C++ equivalent. The remaining Objective-C/C++ flags are added to
CFLAGS/CXXFLAGS, as the compiler will just ignore them when running in
C/C++ mode. This matches Xcode, which also doesn't have a separate build
setting for Objective-C/C++ flags.
The Makefile qmake generator has been rewritten to support Objective-C/C++
fully, by not assuming that we're just iterating over the C and C++
extensions when dealing with compilation rules, precompiled headers, etc.
There's some duplicated logic in this code, as inherent by qmake's already
duplicated code paths, but this can be cleaned up when C++11 support is
mandatory and we can use lambda functions.
Task-number: QTBUG-36575
Change-Id: I4f06576d5f49e939333a2e03d965da54119e5e31
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
first, store the library's full name in the .prl file, like we do on
unix. this is not expected to have any side effects, as QMAKE_PRL_TARGET
was entirely unused under windows so far.
then, rewrite the mingw library handling: instead of letting the linker
resolve the actual libraries, do it ourselves like we do for msvc. we
could not do that before due to the partial file names in the .prl
files: if the library didn't exist at qmake execution time, we'd have to
guess the file extension (the msvc generators never had that problem, as
they know about only one possible extension for libraries anyway).
make use of processPrlFile()'s ability to replace the reference to
the .prl file with the actual library. that way we don't need to
re-assemble the file name from pieces, which was fragile and
inefficient.
QMAKE_*_VERSION_OVERRIDE does not affect libraries coming with .prl
files any more. additionally, it is now used literally (not
numerically), and values less or equal to zero lost their special
meaning as "none" - this isn't a problem, because that's the default
anyway, and there is no need to override bogus versions from .prl files
any more.
no changelog for that, as i found no public traces of that feature
outside qtbase.
[ChangeLog][qmake][Windows] Libraries coming with .prl files can now
have non-standard file extensions and a major version of zero.
[ChangeLog][qmake][Windows][Important Behavior Changes] The .prl files
written by earlier versions of Qt cannot be used any more. This will
affect you if you depend on 3rd party libraries which come with .prl
files. Patch up QMAKE_PRL_TARGET to contain the complete file name of
the library, and replace any /LIBPATH: in QMAKE_PRL_LIBS with -L.
(the part about /LIBPATH: actually refers to the next commit.)
Change-Id: I07399341bff0609cb6db9660cbc62b141fb2ad96
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
seems pointless to tear apart the functions, on the way duplicating some
boilerplate.
Change-Id: Ide3697ca1c931e8de607ac48c21cecce4781fe13
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
this feature was added with a dubious commit message a decade ago, was
undocumented, and there are no public traces of it being used.
if i had to guess what it was meant for: to be able to consistently use
-lfoo throughout a project and centrally (e.g., in .qmake.cache) choose
to use foo<bar> (bar possibly being "d") instead. however, more explicit
methods are being used instead, including in qt itself.
Change-Id: Ic3a98dc3aec59876f26909fbf9f7aba32baa05bf
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
"why not use libtool?" -- sam
"srsly dude?!" -- ossi
[ChangeLog][qmake] Support for CONFIG+=compile_libtool was removed. Use
CONFIG+=create_libtool and/or custom compilers instead.
in addition to its utter insanity and superfluousness, this feature was
apparently quite broken anyway (QTBUG-35745).
Change-Id: I8147a2953f5f065735ae3a2206cd5d33a7c1809a
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
this code would get enabled when *not* compiling with libtool, and would
try to use the real library in .libs/ when one tried to link the .la
file (i.e., it would reproduce libtool's functionality). that directory
structure is found only in build directories, so this code was
apparently meant to support mixed projects. that doesn't sound useful.
on top of that, the other code paths that were supposed to treat .la
files like .prl files were disabled before initial release (because
Somebody (TM) noticed that their code "doesn't behave well"). this code
here did the same thing, but at the wrong abstraction level.
as a side effect, this removes an infinite recursion problem in that
code.
Task-number: QTBUG-46910
Change-Id: If5291f5ff42c1412075c195753162c54598a250e
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
there is no need to consider the "-framework foo" syntax, as we fully
control the list and insert elements exclusively as "-framework" "foo" a
few lines down.
Change-Id: I95fa8b46f53673ea3df1a67a2a44d11f7d679cc6
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
the code had a dead variable assignment and no side effects.
Change-Id: I9add8f1776f23a29c103b46dc725b9f386a4495a
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
it appears to have been some weird attempt at back-mapping file names to
-l arguments, which has been made ineffective with the partial #if 0.
i can't even describe what it did at this point.
Change-Id: Ie31cbbe7fab8b21b039bfff5877397af07731f1b
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
the assumption is that if somebody bothers to actually specify a file
name, they'll most probably go all the way to specify the *correct* file
name. otherwise, they'll use -L/-l flags to specify the libs in a
cross-platform way and rely on qmake's magic.
this code was initially added for the purpose of invoking
findHighestVersion() under windows. this has been off by default for a
while now.
at some point, the code did also swap qt for qt-mt and vice versa if the
specified one was missing. this is obviously gone for a while as well.
the unix code was pretty much broken since day one: there was a regex
match on lib<stub>.* against <stub> itself, which obviously could not
have ever succeeded. consequently, the subsequent code ran into a path
that tried the file name with a trailing dot (instead of a new
extension), which never produced anything meaningful.
[ChangeLog][qmake][Important Behavior Changes] The library lookup has
been simplified. It may be necessary to be more explicit in some edge
cases now.
Change-Id: I5804943f1f7a16d38932b31675caabbda33eada7
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
make sure that all specs define QMAKE_{PREFIX,EXTENSION}_{SH,STATIC}LIB,
and adjust the code to make halfways consistent use of these variables,
in particular on windows; Win32MakefileGenerator::getLibTarget() is gone
as a result, as is QMAKE_CYGWIN_SHLIB. still, tons of hardcoded "lib"
references remain in the unix generator, because no-one cares.
Change-Id: I6ccf37cc562f6584221c94fa27b2834412e4e4ca
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
it would cause the unix generator to set TARGET_EXT, but that wasn't
used anywhere. so remove the dead code. if it ever gets re-introduced,
it will be as QMAKE_EXTENSION_EXE.
Change-Id: I44ce3e612651fd229177e37ab6c8879cd8c474b7
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
rvct and armcc support are remnants from symbian, while the ti linker
support was never completed in the first place.
Change-Id: I5c9d7f0ce67de24c348cbee4af618a499fe06f16
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
there is no reason to expect the various list elements to be
space-encumbered, or to tolerate it if they were.
Change-Id: I1a2e5c8d30456b640408503334c55f9262792db5
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Consider a debug_and_release build of a static library.
Set DESTDIR to different values for debug/release.
Let TARGET be the same for debug/release.
Now qmake would generate code in Unix Makefiles like this:
rm mylib.a
ar mylib.a ...objects...
rm debug/mylib.a
mv mylib.a debug/mylib.a
and for release analogous. This clashes when building in parallel.
This patch resolves this conflict by reducing the commands to:
rm debug/mylib.a
ar debug/mylib.a ...objects...
We believe that every ar implementation that's in use for Qt
is able to operate on files in subdirectories.
[ChangeLog][Important Behavior Changes][qmake][Unix] QMAKE_POST_LINK
steps of static libraries are now required to operate on $(TARGET) in
$(DESTDIR) instead of $$OUT_PWD. This matches the Windows backends.
Task-number: QTBUG-48287
Change-Id: I192f488ed74c56bc32862426d9e9d4237d9b8135
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
$ORIGIN (or $LIB) needs to be escaped to survive the trip through
make and the shell.
this shouldn't break anything, as there was simply no way to get it
right so far.
Change-Id: I86337c5994d10dae2e80dd2f858f74874b14bca7
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Valid characters are (A-Z,a-z,0-9,-,.).
It is unlikely that we will see anything more exotic
than '_' in bundle/library names, go ahead and replace
that character only.
Task-number: QTBUG-46824
Change-Id: Ia97b7cd6247f40a970b4919363ffb66fb347186c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
unlike everywhere else in this file, destdir is not pre-quoted here.
Task-number: QTBUG-47775
Change-Id: Ia5b0c56bbdd3eb095f81b0f615d68a338ffa52c5
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Instead of going to qmake to generate the makefile that we want, we write
the makefile directly and include it from the generated makefile. This
leaves us with a single top level makefile for handling exclusive builds
through xcodebuild, and covers all the various build configurations in
a unified manner. It also allows for improved test device handling.
Change-Id: I66851f181ac4da2c8938645e0aa95ffa0fee33c7
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
they are self-contained, as they are the result of another project's
full resolution. consequently, recursing them just burns cycles, and
additionally introduces the risk of an endless loop if the file is
botched.
Task-number: QTBUG-12711
Change-Id: I401ee691c170092cc61fe05538cec4272ed8f922
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Like application bundles on OSX, the plugin bundle has its Info.plist
in the Contents directory.
Change-Id: I216fa79857924beb0e9c5fcc4a8d06b197a3f383
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
it obviously makes no sense to set up the loop if the container is empty.
as we now have that conditional anyway ...
Change-Id: I6d95c0102734852443c188012bfcb076d879581e
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
QMAKE_FRAMEWORK_VERSION has a fallback to VER_MAJ (which derives from
VERSION), so it's pretty much always set, thus defeating the previous
check.
amends 6cb495de.
Task-number: QTBUG-46215
Change-Id: I2c5560c469617ebeab978e4de78df00baf38d49d
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
don't try to install the primary target, as it obviously doesn't exist.
however, we must not disarm bundle installation.
Change-Id: I3074150f749220d77c1210a4978e71aff9c9a3a9
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
QMAKE_BUNDLE_DATA itself does as well, and it can refer to versioned
resources.
Change-Id: I3d9bf23c2ff81dbb1cd929f3f0e0ce1e67f3258a
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
people may use extra compilers which refer to CXXFLAGS & co., so set
them up "as normal".
Change-Id: I858ca63370a7aed66e04f5417da078b896feefc4
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
instead of allowing arbitrary input and output base paths, restrict them
to the project input and output dirs (in any permutation), which are the
only cases ever used anyway.
this permits much clearer call sites, and allows later optimizations.
Change-Id: I48d149a4417af5c858e66ec57c476a5bc6b17f17
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
In de5553aa, qmake was fixed to resolve QMAKE_INFO_PLIST based on the
current pwd to fix QTBUG-21267. This fix was lost as part of 8c138054
in 5.4.
This fixes the error:
"WARNING: Could not resolve Info.plist ..."
when using qmake for shadow builds on OS X.
[ChangeLog][qmake][OS X/iOS] Fixed QMAKE_INFO_PLIST path resolution
for shadow builds
Change-Id: Icb42b2b3a44856f9b9a86a008081a3353951640d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
it makes no sense to let every spec do that separately, as it's fixed
by the generator+shell.
putting it into a file which is loaded regardless of the spec also
allows us to remove the hardcoded fallbacks from qmake.
if somebody overrode the values in their spec for some weird reasons,
they'll need to override spec_post.prf.
shell-{unix,win32}.conf are now dummies and print warnings.
Task-number: QTBUG-37269
Change-Id: I66c24fb4072ce4d63fdbfc57618daa2a48fa1d80
Reviewed-by: Jochen Seemann <seemann.jochen@gmail.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
it makes no sense to call it on paths that are fixified right before or
after, as fileFixify() calls it itself.
and verifyExtraCompiler() calls normalizePath() on its file argument.
Change-Id: I8fb21e129fd29428d1855de73483087842bc1bdd
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
in most cases, it actually means normalizePath() (because the file name is
used with qt i/o functions afterwards).
this affects QMakeLocalFile::local() as well, so many not immediately
obvious places are affected as well.
there was also one case of fixPathToTargetOS() falling into this category.
this is mostly a no-op, as the qt functions are agnostic to the path
separator.
in some other cases (in particular in the vcproj generator), it actually
means fixPathToTargetOS().
this is mostly a no-op as well, as the two functions are equal except on
msys anyway.
in the <meta file>FileName() functions, the use of a fixPath*() function
is bogus in the first place - fileFixify() already does
fixPathToTargetOS(), and this is correct when the file name is used
verbatim in a make command (which it is). otherwise it's irrelevant.
Change-Id: I26712da8f888c704f8b7f42dbe24c941b6ad031d
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
instead of quoting more or less random variable contents early,
consistently quote everything only right before it is needed. this way
we can be sure that everything is correctly quoted, but not over-quoted.
this removed the need for the insanity that unescapeFilePath() and
similar ad-hoc contraptions were.
this had the somewhat counter-intuitive effect that it was possible to
remove escapeFilePath() calls from PBX::writeSettings() calls - these
were actually only unescaping.
[ChangeLog][qmake][Important Behavior Changes] A lot of quoting issues
have been fixed. As a side effect, qmake has become more sensitive to
over-quoted file names in project files.
(*) ok, maybe not. close enough.
Task-number: fatal: out of memory
Change-Id: I8c51cfffb59ccd156b46bd5c56754c480667443a
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Qt copyrights are now in The Qt Company, so we could update the source
code headers accordingly. In the same go we should also fix the links to
point to qt.io.
Outdated header.LGPL removed (use header.LGPL21 instead)
Old header.LGPL3 renamed to header.LGPL3-COMM to match actual licensing
combination. New header.LGPL-COMM taken in the use file which were
using old header.LGPL3 (src/plugins/platforms/android/extract.cpp)
Added new header.LGPL3 containing Commercial + LGPLv3 + GPLv2 license
combination
Change-Id: I6f49b819a8a20cc4f88b794a8f6726d975e8ffbe
Reviewed-by: Matti Paaso <matti.paaso@theqtcompany.com>
qmake seems to be adding current date/time to the .la files for no
reason, so let's stop do that.
This way, two invocations of qmake actually gives bit for bit similar
output of .la files.
Change-Id: I93c7c4075cc1e05214849eec8629f41ce01e5914
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
no other generator does it. if it actually buys anything, it should be
re-instantiated differently.
Change-Id: I8431702ac7d558d65fd28a7f9e36bb49db2eb253
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
the logic was such that if the bundle name already had the specified
extension which was not the default extension, the default extension
would be appended, too. i don't think that was the intention ...
now we simply put the default into QMAKE_BUNDLE_EXTENSION if its empty -
the variable is not used anywhere else where it would be expected to
preserve its emptiness, so this is safe.
Change-Id: Ied34d10f9fe60756bddc0037dcb2f1d3bbfd3e12
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
this isn't some fuzzy logic, the call sequence is well determined.
Change-Id: I1696b49ed687da83d2969efcfe23ac6565630020
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
