When the tested widget has a focus proxy, then we should check if the
current focus widget is not the same as that focus proxy before setting
it to be the widget that gets focus. This ensures that when back-tabbing
from a widget like QDoubleSpinBox that it will not get stuck inside that
widget and will back-tab to the next correct one.
Fixes: QTBUG-81097
Change-Id: I3f689c7715da7f3ce8c3d2f616041528f5778a2f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
When closing a popup (submenu) triggers closing another popup (the menu)
programatically it can happen that QApplicationPrivate::popupWidgets is
destroyed. Therefore we have to check if popupWidgets is still valid
after the focus change event was delivered.
Fixes: QTBUG-81222
Change-Id: Ide3a6897e43f389d396a80d8b158f7c8eb04e3aa
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
There's no point at keep raising errors after encountering the
first malformed attribute.
Change-Id: Idb37e577ea96c3bd850b3caf008fe3ecd57dd32e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is meant to correspond to required properties in QML.
Change-Id: I2645981e13f7423bc86b48370c165b3cfe2aaa62
Task-number: QTBUG-81561
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
This is part of the migration of qtbase from QRexExp to
QRegularExpression.
If support for regular expression is disabled, fixed string can
still be used.
[ChangeLog][QtCore][QSslCertificate] Add overload of fromPath that does
not make use of QRegExp and deprecate the QRegExp variant.
Task-number: QTBUG-72587
Change-Id: I507d8941cc7d70166da0948375dc421fe5e7d967
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
They are now version 4, which is hopefully the final format,
relying on nothing but QDataStream.
Except for the qshader autotest which tests all the 1..4 versions
and so needs appropriate test data.
Also unifies the batch file naming.
Change-Id: Iec478be86d14dbec7ffb9d5f9b62c14fca5d7c9e
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
We don't know which versions these blacklistings actually apply on
unless we actually get macOS 10.14 and 10.15 into the CI and running
tests, so let's start with that, and then granularize the blacklists
after that.
Task-number: QTBUG-75786
Change-Id: Id79642afa50cb20efa2cd209286b6933918d3a4a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
During 556712f511 a small regression was
introduced which set a wrong value for QStyleOptionTab::position.
Fixes: QTBUG-81393
Change-Id: Ie8c66186b1b79c97bf77c7b139e08840233b7b66
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Same as other versions of MSVC
Fixes: QTBUG-80328
Change-Id: I05c5ffe6d36e0cdfb781080a736c90b6a6d4b2ba
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
[ChangeLog][QtCore][QResource] Added uncompressedSize() and
uncompressedData(), which will perform any required decompression on the
data, prior to returning (unlike data() and size()).
Change-Id: Ief874765cd7b43798de3fffd15aa053bc505dcb1
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
They overlapped and the latter had duplicated code, so make them into
a single data-driven test. At the same time, replace the '-' at the
start of the expected string with QLocale::negativeSign(), since the
test fails otherwise when LC_NUMERIC=nb_NO on Linux (Debian/testing).
Change-Id: I051c75abff16b2e6f8278fcb152b6bde14c71f9a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test expects a very explicit list of events during show, but on
macOS we also get an InputMethodQuery event as a result of the window
becoming active. The test needs to be written significantly to support
these kind of platform differences.
Change-Id: I395c1e9e4e9baf7d9f88f0d067586fc15afb9a16
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
For some reason the firstChild gets the focus when clearing the focus.
This seems to be timing dependent, as removing the 30ms qWait 'fixes'
the issue. So does a processEvent call before minimzing. Both of these
require further investigation.
Change-Id: I62833a5541712f97dc24bc63384fa4c051096537
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
There's a timing issue that affects the position of the vertical
scrollbar when scrolling by pixels.
Change-Id: I29d73574785be539a5870b498a902b1aba887e9c
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
It's not clear why this is failing, but we need to blacklist it so that
we can move over to testing macOS 10.14 and 10.15 in the CI.
Task-number: QTBUG-75786
Change-Id: I208d5af92406c5da8d0210e0188568466b78b2a9
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The combobox popup can overlap a little with the button, and that's the
expected behavior.
Change-Id: I245bfce85cb5ee661ceb51dbe0d844492878a2bc
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
We were being inconsistent in how we handled this, some tests skipping
while others using QVERIFY. It makes more sense to skip the tests, since
the problem is a missing pre-condition of the test, not the test itself
being bad or exposing real failures in the implementation.
Change-Id: I20eacfe12dbce0b0d926e48cbe2d2772819fa4a5
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The logic is now mostly handled in QGuiApplication, with QApplication
only dealing with the widget-specific palettes and interaction between
the style and the palette.
The application now picks up changes to the platform theme and will
re-resolve the current application palette appropriately. This also
works even if an explicit application palette has been set, in which
case any missing roles are filled in by the theme.
The palette can now also be reset back to the default application
palette that's fully based on the theme, by passing in the default
constructed palette (or any palette that doesn't have any roles set).
This is also correctly reflected in the Qt::AA_SetPalette attribute.
Conceptually this means QGuiApplication and QApplication follow the
same behavior as QWidget, where the palette falls back to a base or
inherited palette for roles that are not set, in this case the theme.
Behavior-wise this means that the default application palette of the
application does not have any roles set, but clients should not have
relied on this, nor does QWidget rely on that internally.
It also means that setting a palette on the application and then
getting it back again will not produce the same palette as set,
since the palette was resolved against the theme in the meantime.
This is the same behavior as for QWidget, and although it's a
behavior change it's one towards a more sane behavior, so we
accept it.
[ChangeLog] Application palettes are now resolved against the platform's
theme palette, the same way widget palettes are resolved against their
parents, and the application palette. This means the application palette
reflected through QGuiApplication::palette() may not be exactly the same
palette as set via QGuiApplication::setPalette().
Change-Id: I76b99fcd27285e564899548349aa2a5713e5965d
Reviewed-by: Vitaly Fanaskov <vitaly.fanaskov@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
...but keep support for deserializing for all older versions in order to play
nice with existing .qsb files.
The usage of binary JSON and then CBOR is a historical artifact: relying
on the QJsonDocument (which we generate for purposes unrelated to binary
serialization) was a convenient shortcut. However, writing to and
reading from a QDataStream instead (which QShader already does) is trivial.
In order not to be limited by potential CBOR requirements in the future,
take it all into our own hands.
Extend the qshader autotest accordingly.
Task-number: QTBUG-81298
Change-Id: If0047b659bd6601ca47b5bbbce1b719630cde01e
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
An empty QTextDocument already contains a block; so when the formatting
is fully determined, if the document is still empty, then instead of
inserting a new block, we can set formatting on the cursor, which
affects the pre-existing block, before inserting text. This avoids
leaving a blank line (the default block) above the inserted content.
Fixes: QTBUG-81060
Change-Id: I14e45e300a602493aa59680417d74d4c2b25862d
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Use QStringIterator rather than indexed loops. This fixes handling of
non-BMP code points (which may be lower or uppercase, see the test).
Change also the semantics of the functions, adopting Unicode §3.13
definitions: a string is lowercase/uppercase if it's equal to its
own toLower/toUpper folding.
As a side effect, empty strings are now correctly reported to be
lowercase AND uppercase.
[ChangeLog][Important Behavior Changes] The semantics of
QString::isLower() and QString::isUpper() have been changed to match the
Unicode specification. Now lowercase (resp. uppercase) strings are
allowed to contain any character; a string is considered lowercase
(resp. uppercase) if it's equal to its own toLower() (resp. toUpper())
folding. Previously, a non-letter character would make the string not
lowercase nor uppercase, and the mere presence of an uppercase (resp.
lowercase) letter would make isLower() (resp. isUpper()) return false,
even if the letter wouldn't change under case folding. As a
consequence, now empty strings are lowercase and uppercase.
[ChangeLog][QtCore][QString] Fixed a number of bugs of
QString::isLower() and QString::isUpper(). Empty strings are now
correctly reported to be lowercase (resp. uppercase), and strings
containing code points outside the BMP are now correctly handled.
Note that the behavior of these functions has also been changed.
Change-Id: Iba1398279a072399a9f21295fe75f6e414f3f813
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
To disambiguate &QSslSocket::sslErrors() expression. Add a new
getter - sslHandshakeErrors().
[ChangeLog][Deprecation Notice] QSslSocket::sslErrors() (the getter) was deprecated and superseded by sslHandshakeErrors()
Task-number: QTBUG-80369
Change-Id: I9dcca3c8499800c122db230753dc19b07654f8a2
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
QLocalSocket::error is overloaded as a signal and an accessor (for the
error reported by the signal). This means connecting to the signal using
a pointer to member function would require ambiguity resolution. We
deprecate the old accessor (to be removed in Qt 6) and introduce a new one -
'socketError'.
[ChangeLog][Deprecation Notice] QLocalSocket::error() (the getter) is deprecated; superseded by socketError().
Task-number: QTBUG-80369
Change-Id: Iab346f7b4cd1024dee9e5ef71b4b7e09f6d95b12
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The one that is a getter for the last error found. This is to disambiguate
the expression '&QAbstractSocket::error'. Introduce a new member-function
socketError as a replacement.
[ChangeLog][Deprecation Notice] QAbstractSocket::error() (the getter) is deprecated; superseded by socketError().
Task-number: QTBUG-80369
Change-Id: Ia2e3d108657aaa7929ab0810babe2ede309740ba
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The windows filesystemwatcher did not watch for attribute changes for
directories (e.g. hidden flag) so it was not in sync with other
backends. Fix it by adding FILE_NOTIFY_CHANGE_ATTRIBUTES to the watch
flags when watching a directory.
[ChangeLog][QtCore][QFileSystemWatcher] Fixed a bug that caused QFSW not
to watch for attribute changes on Windows. Now it will correctly report
when files and directories become hidden or unhidden, for example.
Fixes: QTBUG-80545
Change-Id: I31767a0da899963e3940b4f5b36d1d581e6aa57c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The test was previously tracking all Change events,
which made it fragile.
Change-Id: I17872341237009a9a0a2ad2fd5482f917991d7b2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The actual logging code, qt_message_print(), uses toLocal8Bit(), so
testing by comaring with toUtf8() isn't robust.
Change-Id: I7d6614e4af8c679674dbbf4ff47a88b2b75fc2dc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Fix tst_QNoDebug::streaming() to use toLocal8Bit(), to match
QTestLog::ignoreMessage(), which uses fromLocal8Bit().
Change-Id: I65f7b995a582aeab7b7ba61781a229fecd1ed3c3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: David Faure <david.faure@kdab.com>
... in docs, comments, and warnings. Also adopt
some occurrences around there and in the snippets.
Change-Id: Icc0aa0868cadd8ec2270dda794bf83cd7ab84160
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
In the presence of multiple overloads of a function taking either
QString or QStringView, QStringView should always be preferred.
The rationale is that the QStringView overload may have been
added "later" (read: the function was written when QStringView
was not available yet, so it took QString), and the fact that
a function with the _same name_ offers a QStringView overload
implies the function never needed to store/own the string in
the first place.
Add a (compile-time) test for this preference. This is in
preparation for a future QString(char16_t*) constructor
(in Qt 5.15 / Qt 6).
Change-Id: I60a435e494b653548f8f8d52c5d7e7cac2cc875a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Previously, there was only a Python compile test which triggers
only when PySide2 is found. Rename it to pythonCompile().
Extend the TestEntry structure by adding the base line file
and flags, which represent all special cases found in the code.
Check for the presence of a Python base line file in addition
to the C++ one.
Prototypically add one form. Further forms can be added
on the go.
Task-number: PYSIDE-797
Change-Id: Ic2983fa3cab2399a6809e244f93c663e0212f675
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
Deprecated the SAX classes and disabled or replaced their uses in
tests if applicable.
Removed the saxbookmarks example, no point in keeping examples for
the deprecated code.
[ChangeLog][QtXml] SAX classes are now deprecated. Use QXmlStreamReader,
QXmlStreamWriter in QtCore instead.
Task-number: QTBUG-76177
Change-Id: Ic171d62fa0527b0f36f94cf09a69586092269957
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
This amends a1f4321bbb as the font
families should take precedence over the font family set. If the font
family is already included in the families then it should keep its
placement. Otherwise it should be appended.
Task-number: QTBUG-80475
Change-Id: I0049189c88b6879e57619815ec780960e9c0a300
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
It used to be "iterator", causing a qdoc warning:
src/corelib/serialization/qjsonobject.cpp:1405: (qdoc) warning: clang found diagnostics parsing \fn int QJsonObject::const_iterator::operator-(const_iterator other) const
error: out-of-line definition of 'operator-' does not match any declaration in 'QJsonObject::const_iterator'
Add a small test.
Change-Id: Id65effffa720ed1e0fb0ee6937dcc4298f3ef363
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
In Qt6 there is a behavior change with extra stuff after the seconds -
it's no longer allowed and will result in an invalid QTime.
This was introduced with bf65c27789 but
the autotests were not adjusted for it.
Change-Id: Ia78f4f2a8019e46d9d0e8e8b8918a3ab2d4638e2
Reviewed-by: Liang Qi <liang.qi@qt.io>
If a type has both a converter to QVariantList and to
QSequentialIterableImpl registered, we would have chosen the
QSequentialIterableImpl version. In the case of types like QJSValue,
this is more costly. With this change we therefore uses the direct
conversion if it has been registered.
The same applies to QAssociativeIterableImpl and
QVariantHash/QVariantMap.
Change-Id: I9c0b5068efe4bfbc5e0598a200e6db59201e9974
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
It makes sense for it (instead of triggering the QAbstractItemModel
base class implementation, which doesn't do anything). Safe to override
virtuals in this case -- code calling the old version could not do
anything useful, so at least new code gets those functions properly
implemented for free.
Change-Id: Iefe1ff25e15d877435e93ab28289ad2579616f72
Task-number: QTBUG-48076
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: David Faure <david.faure@kdab.com>
In Qt6 there is a behavior change with extra stuff after the seconds -
it's no longer allowed and will result in an invalid QDateTime.
This was introduced with bf65c27789 but
the autotests were not adjusted for it.
Change-Id: Iee6a9a7ac6cbb2754a68e082bb7074d17fac9d9c
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
If the singular fontFamily() is given, then this is obviously the one to
be preferred over any plural fontFamilies(). Make sure it always ends up
first in the list of emitted font families.
Change-Id: I1e3b1ba29721c8298b1a0d4a1e1da49ba5b4e7ac
Fixes: QTBUG-80475
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
When QLocale::Country is set to QLocale::India numbers are written so that
after first three from the right and then after every second will be comma.
E.g. 10000000 is written as 1,00,00,000
Task-number: QTBUG-24301
Change-Id: Ic06241c127b0af1824104f94f7e2ce6e2058a070
Reviewed-by: Venugopal Shivashankar <Venugopal.Shivashankar@qt.io>
Reviewed-by: Teemu Holappa <teemu.holappa@qt.io>
QString(View)s can be built or manipulated in ways that make them
contain/refer to improperly encoded UTF-16 data. Problem is,
we don't have public APIs to check whether a string contains
valid UTF-16. This knowledge is precious if the string is to be fed in
algorithms, regular expressions, etc. that expect validated input
(e.g. QRegularExpression can be faster if it can assume valid UTF-16,
otherwise it has to employ extra checks).
Add a function that does the validation.
[ChangeLog][QtCore][QStringView] Added QStringView::isValidUtf16.
[ChangeLog][QtCore][QString] Added QString::isValidUtf16.
Change-Id: Idd699183f6ec08013046c76c6a5a7c524b6c6fbc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add 2 methods to set/ask if a tab is hidden.
[ChangeLog][QtWidgets][QTabWidget/QTabBar] Tabs can now be
hidden with setTabVisible
Fixes: QTBUG-63038
Change-Id: I7b07ecdb485e1f6c085d03515ef2b73baae889de
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Added new API setDocumentXmpMetadata/documentXmpMetadata and
addFileAttachment
[ChangeLog][QtGui][QPdfWriter] New API to provide external document XMP
metadata and attach files to PDF.
Fixes: QTBUG-78651
Fixes: QTBUG-78764
Change-Id: Ic0b37e8d12899f907001db469080594c14c87655
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
It wasn't tested and behaves in a very particular way.
Change-Id: I60a31681e5b221cf9a86df77e410a76ee4c10864
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
This method should not ignore accessibility objects without
corresponding widget. The widget may have parts with their own
QAccessibilityInterface and these can be also focused.
VoiceOver ignores them if they are not returned by focusChild().
QAccessibleTabBar::focusChild() has been implemented to demonstrate
the concept and make tab titles of QTabBar readable by VoiceOver.
Task-number: QTBUG-78284
Change-Id: Id7c62d86154bbd5d47d6bbee8cb7d05268c2e151
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
QStringListMode::moveRows() had an issue when the destination was before
the source row.
Change-Id: Icf64e5b4cdd6a39faf3ba4ccc3883196b247ccbd
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: David Faure <david.faure@kdab.com>
QListModel::moveRows() had an issue when the destination was before the
source row.
Change-Id: I4ce8b425451f2f53c7eb3b211e9590753dec618a
Reviewed-by: Luca Beldi <v.ronin@yahoo.it>
Reviewed-by: David Faure <david.faure@kdab.com>
This is not to be taken as supported and is still undefined behavior,
but I prefer we do not crash.
Change-Id: Icf4f3398bfd57fcbdc611a5a821a1f2de0838330
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
The previous implementation was *extremely* expensive. It
relied on loading a binary JSON file from resources (which
involved decompressing it), then extracting information out of
it to build a gradient. Already-loaded gradients were kept in
a local cache, which had to be mutex protected.
Instead, this patch extends the gradient generator to build
static arrays filled with the web gradient data, sitting in
.rodata.
These arrays are used when building QGradient objects with a
web gradient. No explicit mutex protection is necessary, since
accesses will just read from the arrays.
As benefits, this patch removes:
* the binary json representation from QtGui's resources (~4KB
compressed, ~50KB uncompressed)
* the overhead of reading from the JSON for each used web
gradient;
* the startup costs of registering the webgradients in the
resources;
* all the overhead of mutex locking when building such
gradients;
* all the runtime memory allocations to load, parse and cache
the web gradients (including the memory + CPU spike on first
load due to the uncompression of the JSON data, as well as a
couple of deep copies).
Change-Id: If5c3d704430df76ce8faf55ee75ebd4639ba09c4
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
QItemSelectionModel::columnIntersectsSelection() should honor the parent
according to the docs. For rowIntersectsSelection() this was fixed a
long time ago but columnIntersectsSelection() was forgotten.
Sync the both functions and use range-based for loops as a drive-by.
Fixes: QTBUG-80644
Change-Id: Iaf08f85e2225204d1e6564fa4bb0bc826352ed53
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
When an existing item is replaced with a new one in
QStandardItemModel::setItem() then the persitent index is invalidated
which leads to some unexpected behaviors (like e.g the header size and
resize mode are reset).
Therefore we have to make sure that the invalidation does not happen.
This can be achieved by delaying the call to QStandardItem::setModel()
for the old item until the new is properly added. After this, the old
item no longer gets a valid QModelIndex from the model and therefore
can't invalidate the persistent index anymore.
Fixes: QTBUG-13605
Fixes: QTBUG-73000
Fixes: QTBUG-80586
Change-Id: I4e45e6feb81b7287c0859f638d7ab1a576fc2f0f
Reviewed-by: David Faure <david.faure@kdab.com>
As opposed to unite(), this inserts one map into the other
without duplicating elements.
Task-number: QTBUG-35544
Change-Id: Ie8ab350b29148851a3176cef1007e8a4ca82c273
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This patch fixes the QMetaObject::superClass hierarchy for Q_GADGETs
that inherit from a template which in turn inherits another Q_GADGET.
One common scenario where this is applied is for the CRTP. Without this
patch, moc would stop at the template and then sets the superClass
QMetaObject to a nullptr. For QObjects this works, since there moc knows
that every child must by definition inherit QObject. In order to support
this for Q_GADGETs too, we defer the judgment about the availability
of a staticMetaObject in the base class to compile time through the
existing QtPrivate::MetaObjectForType<Base>::value() helper.
[ChangeLog][QtCore][moc] Moc now correctly sets a non-null
QMetaObject::superClass for Q_GADGETs that inherit from a template which
inherits another Q_GADGET.
Change-Id: I103b5efd74ed24172dffce477ca2ed6d0f374d44
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
This flag is used in QSequentialIterable and QAssociativeIterable to indicate
that the data pointer in VariantData should be deleted after the variant has
been constructed.
The use case for this is
https://codereview.qt-project.org/c/qt/qtdeclarative/+/284151, where we have
a proxy iterator and cannot easily return a pointer to already owned data, as
it is hard to manage its lifetime in the iterator. In contrast, it is clear
that we can release the memory in the QSequentialIterable functions, as it has
already been copied into the QVariant there.
Change-Id: I2b33497d991cd4f752153e0ebda767b82e4bb851
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
This saves us from having to bootstrap rcc in regular (non-cross)
compilations, as it can now link to QtCore. Actually un-bootstrapping
rcc is left as an exercise for the reader.
This commit discovered that MSVC cannot handle constexpr arrays bigger
than 256 kB, at which point it simply starts claiming that the constant
expressions using it are not constexpr. ICC has a similar problem at
64 kB, but it tells you why ("note: type "const unsigned char [65537]"
too large for constant-expression evaluation").
Note also that this requires gzip or zstd to be in PATH for compression
to happen. RCC linked to zlib, which is always present due to the
bundled copy. gzip's presence is not likely to be a problem on Unix
systems, but could be for Windows users, especially MSVC ones. If gzip
is not present, QtCore's size will increase by about 1910 kB of
read-only (sharable) data.
Change-Id: I2b1955a995ad40f3b89afffd15a3e65a94670242
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
ISO date format doesn't allow spaces within a date, although 3339 does
allow a space to replace the T between date and time. Sixteen tests
added to check this all failed. So clean up the handling of spaces in
the parsing of ISO date-time strings.
[ChangeLog][QtCore][QDateTime] ISO 8601: parsing of dates now requires
a punctuator as separator (it previously allowed any non-digit;
officially only a dash should be allowed) and parsing of date-times no
longer tolerates spaces in the numeric fields: an internal space is
only allowed in an ISO 8601 date-time as replacement for the T between
date and time.
Change-Id: I24d110e71d416ecef74e196d5ee270b59d1bd813
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
even if we are currently inside processEvents (apparently called manually
and not from QEventLoop::exec()). A carefully crafted application
(see, for example, the linked QTBUG or even updated auto-test)
can trigger itself into failing to exit the current (potentially nested)
event loop. We can harden our Cocoa event dispatcher to detect
such condition and properly propagate 'interrupt' to where it'll
do its job, indeed, interrupting the real event loop (aka [NSApp run]).
This mainly means we have to undo what bool blocker would erroneously do.
Also, long live (as people love to say these days) to another tricky
(somewhat) auto-test (surely, it's not flaky!).
Fixes: QTBUG-79477
Change-Id: I794f0cda23e24d36be67f2bb63d52b74be057c31
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The implementation for the X mask would accept any printable
character. Since that includes the blank character, there was no
difference in behavior between the requiring X and optional x: both
would allow the input to be unset, i.e. blank.
This change should be seen in conjunction with the doc improvement
da0af1e.
[ChangeLog][QtWidgets][QLineEdit] Inputmask X character now requires non-blank input.
Fixes: QTBUG-76320
Change-Id: I3e0363e9be5c13373a157cce69c99379615b5829
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Fix some tests in tst_QSqlQuery:
- make sure to use QSql::HighPrecision in tst_QSqlQuery::precision()
(needed for psql)
- remove outdated stuff for mysql 3.x
- psql_bindWithDoubleColonCastOperator: the placeholder are stored as
named placeholders in psql
- avoid some useless old-style casts
Change-Id: I54d29a7e24f17d853cce6baa09a67d9278098810
Reviewed-by: Robert Szefner <robertsz27@interia.pl>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
The platform window may create or destroy its surface from other entry
points than the QWidget API, in which case QWidget needs to sync up
its own state to match. In particular WA_WState_Created and the winId
needs to be recomputed.
Fixes: QTBUG-69289
Fixes: QTBUG-77350
Change-Id: I769e58ead3c2efcf8c451c363108848feade9388
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
Windows apparently has special code to deal with those addresses. If all
your network interfaces are up and have acquired addresses, then the
link-local network at 169.254.0.0/16 is unreachable. I had never caught
this because both my Windows VM and my bare metal Windows have inactive
interfaces (like the Bluetooth PAN one) and, when inactive, Windows
assigns a link-local address. But in the CI, the interface(s) were all
up and running, causing this issue.
Unix systems don't treat IPv4 link-local any differently, so they always
worked, so long as any interface was up and there had to be one to reach
the network test server.
This commit reworks the test to add test addresses based on the
addresses found on up & running interfaces (see tst_qudpsocket.cpp). For
IPv4, we flip the bits in the local portion of the address. For IPv6, we
add a node with an address I generated randomly (non-universal), with
the same scope.
Fixes: QTBUG-65667
Change-Id: I568dea4813b448fe9ba6fffd15dd9f482db34991
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
In prevision to Qt6 which is going to discourrage the use of the integer id,
add some missing API to the staticless QMetaType API:
- Add a way to construct a QMetaType from a type without calling qMetaTypeId:
QMetaType::fromType<T>()
- Add equality operators
- Add a QMetaType::name() function
- Add a default constructor (by adding a default parameter to the existing ctor)
Change-Id: I95487c1c31bdf0d773717daa9d5452cbced30673
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
In some cases when editing the text (for example when removing the
selected text, or pasting a text block) the text cursor position is
updated, but its visual x position is not updated. This causes the next
cursor movements to start from a wrong position.
Force the update for those cases.
Fixes: QTBUG-78479
Change-Id: Ia496be62beec58660f5e1695e5aafae09c79684e
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Cite RFC 3339 as basis for allowing a space in place of the T, too.
The RFC mentions that ISO 8601 accepts t and z for T and Z, so test
for them case-insensitively. Add a test for this.
Change-Id: Iba700c8d74d485df154d27300aab7b1958e1ccef
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If milliseconds were followed by a space, the space was included in
the count of "digits" read as the fractional part; since we read (up
to) four digits (so that we round correctly if extras are given), a
harmless apce could cause scaling down by too large a power of ten.
Since QString::toInt() ignores leading space, we were also allowing
interior space at the start of the milliseconds, which we should not,
so catch that at the same time. Added tests, including one for the
rounding that's the reason for reading the extra digit, when present.
Fixes: QTBUG-80445
Change-Id: I606b29a94818a101f45c8b59a0f5d1f78893d78f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QDateTime is a friend of QTimeZone, so can access its internals; but
it must check the zone is valid before doing so.
Expanded tst_QDateTime::invalid() and made it data-driven to catch the
failure cases.
Commented on a test-case that caught a mistake in my first attempt at
this, and on QDateTimeParser's surprising reliance on a quirk of
QDateTime::toMSecsSinceEpoch()'s behavior.
Fixes: QTBUG-80146
Change-Id: I24856e19ff9bf402152d17d71f83be84e366faad
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
QByteArray::fromBase64 was liberal in its input, simply skipping
over invalid characters. As a side-effect of this, it had
no error reporting, meaning it could not be used to convert
fromBase64 _and_ validate the input in one go.
Add more option flags to make fromBase64 strictly validate
its input. Since we want to know whether it has succeeded
or not, and the existing fromBase64 overloads do not
allow for that, introduce a new function that returns
an optional-like datatype.
While at it: base64 decoding can be done in-place; add an
rvalue overload to enable this use case.
[ChangeLog][QtCore][QByteArray] Added the new fromBase64Encoding
function.
[ChangeLog][QtCore][QByteArray] Added new flags to make
fromBase64 / fromBase64Encoding strictly validate their input,
instead of skipping over invalid characters.
Change-Id: I99cd5f2230f3d62970b28b4cb102913301da6ccd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When cloning a QTextDocument, the text fragment of the original document
is copied into the new one, which results into copying also the
formatting attributes. However, when the text document is empty, the
corresponding text fragment is also empty, so nothing is copied.
If we want to transfer the formatting attributes for an empty document,
we need to set them explicitly.
Fixes: QTBUG-80399
Change-Id: I382cd0821723436120af47c06ec7bfa849636307
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
We forgot to reset the flags when replacing the element, so we ended up
with an integer with HasByteData after:
testMap[0] = QStringLiteral("value");
testMap[0] = 42;
Fixes: QTBUG-80342
Change-Id: Ia2aa807ffa8a4c798425fffd15dabfa066ea84b0
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
As opposed to unite(), this inserts one hash into the other
without duplicating elements.
Change-Id: Ifc786c48f5dc3ab18c29782e73eac3c1a3ef8981
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
