A foreign window can be used both for embedding a Qt window into a
native window hierarchy, or for embedding a native window into a Qt
window hierarchy. In the former case, we should not modify the foreign
window in any way. Since the platform does not know anything about the
intended use case at the time of the foreign window creation, it should
avoid modifying the foreign window in any way, and should instead pick
up the foreign window state and reflect that through QWindow.
Pick-to: 6.5
Change-Id: Id2e39d101277ecebd656d615cea3e7f734a4b0a6
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QT_SCREEN_SCALE_FACTORS is in many cases set on behalf of the user,
instead of by the user, so we should apply the standard app
scale factor policies to it, instead of interpreting it
as a user override.
Specifically, make it subject to the rounding policy set by
QGuiApplication::setHighDpiScaleFactorRoundingPolicy(). This
means that applications which support integer scale factors
only will see integers only, also when QT_SCREEN_SCALE_FACTORS
specifies a fractional factor.
Users who want to override can set
QT_SCALE_FACTOR_ROUNDING_POLICY=PassThrough
to restore the default Qt rounding behavior.
[ChangeLog][QtGui] The high-DPI scale factor rounding policy (settable with
QGuiApplication::setHighDpiScaleFactorRoundingPolicy() or
QT_SCALE_FACTOR_ROUNDING_POLICY) now applies to scale factors set
with QT_SCREEN_SCALE_FACTORS.
Fixes: QTBUG-95930
Fixes: QTBUG-99546
Change-Id: I936e96671fe2a0a43c3e8129f0768875cb011103
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Amends 76c63936d3 by adjusting the test case.
We still just test that we can open a file based on a filename that we came
up with ourselves.
Also, update usage documentation and make the snippet a bit more relevant.
Change-Id: I5bf00210d74e2a73d5a71a09a5beb1b3f6f8e225
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Input events that originate from actual device interaction should reflect the
device's state, and device and events need to be kept in sync so that event
sequences (such as multi-touch events, where we have begin/update/end cycles
spanning multiple events) are working correctly.
For that reason, the event point data in pointer events is explicitly shared,
and we only detach in exceptional situations. This saves us memory allocations,
and makes sure that the event point data carried by events, and the event point
data stored persistently in the device, are kept in sync.
Cloned pointer events do not originate from device interactions, and should
therefore not sync back to the device. E.g. accepting a clone should not modify
the original event data stored in the device. There are exceptions here as
well, e.g. when cloning an event in Qt in order to deliver a translated version
of it to a different scene. Different points might even get delivered to
different scenes or windows, or at least different items in the same scene. For
that reason, we explicitly detach, and then explicitly write back the relevant
states after the cloned event has been delivered.
But in general, we should assume that cloned events do not write back to the
device. Since QEventPoint is an explicitly shared data type that never detaches
itself, we have to explicitly detach it when making copies that should not be
shared.
The ideal implementation of this would be to do the detach in the copy
constructor of QPointerEvent, which is called when cloning. However, Qt itself
makes copies of QPointerEvent without using clone, e.g. when assembling lists
of touch events for the different subscenes or windows in
QGuiApplicationPrivate::processTouchEvent, where event objects are added to a
QVarLengthArray<QMutableTouchEvent>. This makes copies, and those copies must
not detach.
So we have to implement the special cloning behavior in each override of
QPointerEvent::clone(). For this, introduce a dedicated macro for the common
member functions. This macro must be used for QPointerEvent subclasses.
Fixes: QTBUG-107560
Change-Id: I4b56f9e71c7d067ba9054a2a631e8ba5bc7b1ab9
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
After 109e088c7c, cache keys were unique
for palettes with different private or data instances, but the key did
not change when a palette without any shared copies was modified, as
that does not create new private data structures.
To fix this, always increase the counter for the private data structure,
also when not detaching from shared copies.
Augment test case with scenario that broke.
Pick-to: 6.4
Fixes: QTBUG-108709
Change-Id: I606abfb8b1a03e515e46b10dc840a631eb31d496
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: JiDe Zhang <zhangjide@uniontech.com>
Reviewed-by: Alessandro Portale <alessandro.portale@qt.io>
In Qt 5, QWin(dows)Mime and QMacMime lived in the respective Extras
modules, which were removed and partially folded into the relevant
modules in Qt. QWindowsMime and QMacMime continued to provide the
abstraction for implementing built-in support for native clipboard
formats and UTIs within Qt, but only as private APIs.
After the recent clean up of those APIs and respective infrastructure,
we can now bring them back as public converter interfaces. Application
developers can subclass those and instantiate an instance of their
implementation to add support for platform or application specific
data formats.
These interfaces are not in the QNativeInterface namespace, as
applications don't call into Windows or macOS using those interfaces.
I.e. there is no class on which an application would call
auto *converter= nativeInterface<QWindowsMimeConverter>();
Also, since applications override those converter types, we do want to
guarantee binary and source compatibility.
[ChangeLog][QtGui][QWindowsMimeConverter] Reintroduced to allow
applications to add support for conversion from and to Windows-native
clipboard formats to MIME-encoded data.
[ChangeLog][QtGui][QUtiMimeConverter] Reintroduced to allow
applications to add support for conversion from and to clipboard data on
macOS and iOS to MIME-encoded data.
Fixes: QTBUG-93632
Change-Id: Iebd909c3970015d203f59d5ab15e306b3d312f6e
Reviewed-by: Yuhang Zhao <2546789017@qq.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Upon programmatic window state changes, windowStateChange was fired
once in QWindow::setWindowStates and once when the visual state had
been changed by the window interface.
This patch adds if guards to ensure that the singal is fired only once.
It adds a corresponding autotest to tst_QWindow.
tst_QWidget::resizePropagation() is adapted to no longer expect double
signal emission.
Fixes: QTBUG-102478
Pick-to: 6.4 6.2
Change-Id: If093c0a883d76d8a676e4fab90db6b0676452267
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Debug serials and detatch numbers of deep and shallow detatch in test
function cacheKey, if it fails.
That implicitly removes a compiler warning about these variables being
unused.
Change-Id: I481f4b63e3ed0d50fb442dffc658b97d913059bc
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
This is a semantic patch using ClangTidyTransformator as in
qtbase/df9d882d41b741fef7c5beeddb0abe9d904443d8, but extended to
handle typedefs and accesses through pointers, too:
const std::string o = "object";
auto hasTypeIgnoringPointer = [](auto type) { return anyOf(hasType(type), hasType(pointsTo(type))); };
auto derivedFromAnyOfClasses = [&](ArrayRef<StringRef> classes) {
auto exprOfDeclaredType = [&](auto decl) {
return expr(hasTypeIgnoringPointer(hasUnqualifiedDesugaredType(recordType(hasDeclaration(decl))))).bind(o);
};
return exprOfDeclaredType(cxxRecordDecl(isSameOrDerivedFrom(hasAnyName(classes))));
};
auto renameMethod = [&] (ArrayRef<StringRef> classes,
StringRef from, StringRef to) {
return makeRule(cxxMemberCallExpr(on(derivedFromAnyOfClasses(classes)),
callee(cxxMethodDecl(hasName(from), parameterCountIs(0)))),
changeTo(cat(access(o, cat(to)), "()")),
cat("use '", to, "' instead of '", from, "'"));
};
renameMethod(<classes>, "count", "size");
renameMethod(<classes>, "length", "size");
except that the on() matcher has been replaced by one that doesn't
ignoreParens().
a.k.a qt-port-to-std-compatible-api V5 with config Scope: 'Container'.
Added two NOLINTNEXTLINEs in tst_qbitarray and tst_qcontiguouscache,
to avoid porting calls that explicitly test count().
Change-Id: Icfb8808c2ff4a30187e9935a51cad26987451c22
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The "a" and "A" rows appeared under Valid, then again under Only Keys.
The two copies were identical, in each case, so drop the latter.
Change-Id: Ib3d84710e772171bb4a5e0aefd20022810fb41cd
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
In Qt 6, after changes such as 121fddcf5a,
we go through the QPA layer to close widget windows properly. Closing
and hiding of windows is now done in when we receive and handle the
window system's CloseEvent.
Such an event to a modally blocked window should be blocked, so that
users can't close a modally blocked window. However, if the event is the
result of a call to QWindow::close, then it should not be blocked.
Luckily, we know that the event is the result of such a call, so let
such events through. This restores compatibility with Qt 5, where it was
possible to first open a new dialog, and then close the previous dialog.
Add a test case.
Fixes: QTBUG-107188
Pick-to: 6.4 6.2
Change-Id: Id812c1fc36aa0e1a10dfb8d3a16a11d387289b05
Reviewed-by: Axel Spoerl <axel.spoerl@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
We've been requiring C++17 since Qt 6.0, and our qAsConst use finally
starts to bother us (QTBUG-99313), so time to port away from it
now.
Since qAsConst has exactly the same semantics as std::as_const (down
to rvalue treatment, constexpr'ness and noexcept'ness), there's really
nothing more to it than a global search-and-replace, with manual
unstaging of the actual definition and documentation in dist/,
src/corelib/doc/ and src/corelib/global/.
Task-number: QTBUG-99313
Change-Id: I4c7114444a325ad4e62d0fcbfd347d2bbfb21541
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
After 1d961491d8, palettes are different
if they either have different brush data, or a different private. Two
privates can share data, but still must generate different cache keys.
The cacheKey has so far been composted of the serial number of the Data
struct, and a detach number that is incremented when we detach the
private.
This failed for two reasons:
- the implicit copy constructor of the Data class copied the serial
number, when it should have incremented it. Fix that by member-
initializing the serial number rather than doing it only in the default
constructor. The member initialization is also executed for the copy
constructor.
- the detach_no logic as it was implemented does not guarantee that two
copies of the same palette that share data, but have different resolve
masks (and thus different privates) have different detach_no values.
Use a static serial counter for that number as well.
Amend the test case to verfiy that cache keys, and the elements of the
cache keys, change when they are expected to.
Fixes: QTBUG-106984
Pick-to: 6.2 6.4
Change-Id: I84d7055ce8bfe0d42f1f8e9766f3f1ad610f4ec8
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
On Wayland there is a special case when decorations are enabled,
where we post an initial update request to ensure widgets are
redrawn after the buffer is recreated (see
af7b60ade5c4be81cbc58eb18307c017d5594071 in qtwayland). To
make sure the test behaves the same on Wayland as on other
platforms, we disable client-side decorations when running
these tests.
The flag is primarily required for the requestUpdate() test
at the moment, but it is only queried once per application
run, so it has to be set before any tests are run.
Pick-to: 6.4
Fixes: QTBUG-100889
Change-Id: Ica6d744083ecae4a3722b6d04b956e7615f0dfe5
Reviewed-by: Inho Lee <inho.lee@qt.io>
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
It was an old test written in a very low-level way, which perhaps is ok
to be independent of testlib in a few tests; OTOH, it was blacklisted
on a couple of platforms. Perhaps doing touch events the standard way
could be more stable.
While we're at it:
- verify that the touch events are accepted, and thus verify the new
bool return value from commit()
- implement paintEvent() to help understand the layout, and touchpoint
locations
- remove repeated QCOMPARE lines
- skip the test if window positioning fails
- try to un-blacklist it, on the assumption that window positioning
failure was the reason
Task-number: QTBUG-87025
Task-number: QTBUG-104656
Pick-to: 6.4
Change-Id: Ie22eb24abf95cd849990a56212be87d06ce8e574
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Doris Verria <doris.verria@qt.io>
The paletteChanged() and fontChanged() signals were deprecated
in Qt 6.0, but the test was still using them unconditionally.
This patch guards the usage of the deprecated signals with
the usual QT_DEPRECATED_SINCE(6, 0) check, so that the test
can be built and run with QT_DISABLE_DEPRECATED_UP_TO >= 0x060000
This commit amends 68ea9c0227
Task-number: QTBUG-104858
Change-Id: Idb2da6d91afcdb664f325f23ec625947c9a7fac0
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
The client does not know its global window position on Wayland,
so testing for this will not work.
Pick-to: 6.4
Fixes: QTBUG-100888
Change-Id: Ibdfc84f1b33d25223dbd740603ce4783c21afc70
Reviewed-by: Inho Lee <inho.lee@qt.io>
The new name describes the behavior in a better way.
[ChangeLog][Build System] The QT_DISABLE_DEPRECATED_BEFORE macro is
renamed to QT_DISABLE_DEPRECATED_UP_TO. The old name is deprecated, but
is still recognized if it is defined during configuration and the new
name is not defined.
Task-number: QTBUG-104944
Change-Id: Ifc34323e0bbd9e3dc2f86c3e80d4d0940ebccbb8
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The intialSize bug has been fixed in Qt Wayland Client, and thus
this test will now start XPASSing.
Pick-to: 6.4
Task-number: QTBUG-66818
Change-Id: I4b9cb8bd9306a67f04295eb23f09574dad0e97f7
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
The vast majority of in-tree users pass simple and short C string
literals as the value. By porting to QByteArrayView, we document that
we'll accept non-NUL-terminated data, and do the NUL-termination
internally, using SSO'ed std::string, saving memory allocations in the
common case of short strings.
I didn't bother to check which direction std::string takes for
nullptrs these days (there was a change accepted in that area for
C++20 or 23), so play it safe and protect against them.
Follow-up to
Task-number: QTBUG-105302
Change-Id: I2369acc62f1d5cbc26135396cfe0602d8c75300c
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
CMakeLists.txt and .cmake files of significant size
(more than 2 lines according to our check in tst_license.pl)
now have the copyright and license header.
Existing copyright statements remain intact
Task-number: QTBUG-88621
Change-Id: I3b98cdc55ead806ec81ce09af9271f9b95af97fa
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
We can implement the trivial {default,copy,move} construction outselves
inside qmetatype.cpp and qvariant.cpp, simplifying the QMetaType
interface object, removing up to three relocations per QMTI.
This adds the testing for QMetaType::isXxxConstructible and
isDestructible that couldn't be added before.
Change-Id: Ic44396b31ba04712aab3fffd16ff0a28f541d507
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The cause is that the first EXPOSE event comes with the window not
having focus yet. See QTBUG-105177.
Also remove processEvents() as events are always processed when doing
qWaitFor...().
Task-number: QTBUG-105177
Change-Id: I2260d1885388bbf7091c423bc9b4c16e2ed0090f
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Previously the failure was been ignored because of the very generic
"linux" entry in the BLACKLIST file
Task-number: QTBUG-105201
Change-Id: I6914fe350f78266fc18541eb8fcd881f5a4ac511
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
+ I could not reproduce the flakiness on OpenSUSE Tumbleweed.
+ No significant flakiness can be seen for this test in our testresults
statistics.
+ Ubuntu-16.04 is no longer part of our CI
Change-Id: I7a18fc3fe2e58af8533171ebae0457b08424e810
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Before a recent fix it would happen occasionally that
lastNormalizedPositions.at(0) would segfault because the list was
empty. The cause of the flakiness was fixed, but make the test more
resilient anyway by checking first the list is correctly populated.
Furthermore on some platforms this check fails:
qAbs(leftWidget.lastNormalizedPositions.at(1).x() - 0.8) < 0.05
So instead of QVERIFY use QCOMPARE_LT to print the values when it fails.
Task-number: QTBUG-104268
Change-Id: Id5430eb53c133cf5d23647cfd9749f01f266efce
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Sometimes XCB_EXPOSE event is being propagated twice, once before and
once after qWaitForWindowExposed(). But the window has focus only after
the second expose event. Changing it to qWaitForWindowActive() fixes the
issue.
Fixes: QTBUG-104268
Pick-to: 6.2 6.3 6.4
Change-Id: Ibc78dd4958ed1a4a8d0967b29d2a53457ab9ae8b
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
... when QT_DISABLE_DEPRECATED_BEFORE is past the deprecation version.
This commit actually stops using the deprecated signals when we build
Qt with QT_DISABLE_DEPRECATED_BEFORE >= 0x060000. Otherwise we will
get a compilation error because the signals will be removed.
Task-number: QTBUG-104857
Pick-to: 6.4 6.3 6.2
Change-Id: Ie513ecc9451bf2d88f80857cf19f3d2b4958d022
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Amends 1d961491d8. We modify the resolve
mask after making a shared copy of 'other', so we must detach. Call the
setter designed for that purpose.
Pick-to: 6.4 6.3 6.2
Task-number: QTBUG-98762
Change-Id: I4f45223e74764a341378992172787fae73efb8b7
Reviewed-by: JiDe Zhang <zhangjide@uniontech.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
56bd1b76d2 changed the update
resolve mask behavior in QPalette to avoid detaching brush data
when modifying the resolve mask if the brush value is not changed.
But this behavior broke compatibility, it introduced unknown risks, and
we cannot ensure that other code in Qt does not depend on the old
behavior.
We both need to ensure that we don't detach when the value is not
changed, and ensure that the resolveMask is always updated regardless
of whether the value changes, so we need to split them up and
independently share the brush data.
QFont will update its corresponding resolveMask even if the value has
not changed, so it is better to correct this behavior so that QPalette
and QFont are consistent.
[ChangeLog][QtGui][QPalette] Always update resolve mask in
QPalette::setBrush, even if the value of brush has not changed.
Fixes: QTBUG-98762
Pick-to: 6.4 6.3 6.2
Change-Id: Ib845361b30f21c3d78c16ced923c1678b12e05ac
Reviewed-by: JiDe Zhang <zhangjide@uniontech.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Unblock the qtdeclarative dependency update.
This behavior change is causing a regression for QQmlPreviewHandler's
zoom feature. Back out of the change for now, until we can find a way
to make both use cases work.
This reverts commit 1c0a56a2f3.
Change-Id: I1b3d84504bbcb4f2b2250a20194fdaf4ab4fd97f
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
QFutureCallOutEvent is used externally, so it needs to be exported.
This reverts commit 3141a13b2a.
Fixes: QTBUG-104732
Pick-to: 6.4
Change-Id: I82c9e7414192ee948f78259bd74a404691a7805a
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
QT_SCREEN_SCALE_FACTORS in many cases set on behalf of the user,
instead of by the user, so we should make it less sharp and more
in line with standard high-dpi configuration.
Specifically, make it subject to the rounding policy set by
QGuiApplication::setHighDpiScaleFactorRoundingPolicy(). This
means that applications which support integer scale factors
only will see integers only, also when QT_SCREEN_SCALE_FACTORS
specifies a fractional factor.
Users who want to override can set
QT_SCALE_FACTOR_ROUNDING_POLICY=PassThrough
to restore the default Qt rounding behavior.
[ChangeLog][QtGui] The high-DPI scale factor rounding policy (settable with
QGuiApplication::setHighDpiScaleFactorRoundingPolicy() or
QT_SCALE_FACTOR_ROUNDING_POLICY) now applies to scale factors set
with QT_SCREEN_SCALE_FACTORS.
Pick-to: 6.4
Fixes: QTBUG-95930
Fixes: QTBUG-99546
Change-Id: Ibb0aa5cb9d3a356d33429d0efe69d984b2530728
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Test setting both via QGuiApplication property and environment.
Change-Id: Iaccc920adb6294d610b02d4c844aa5b15eb7eecd
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Under normal circumstances, when the second point is touched, the
first point has not been released, and the message at this time
should contain two touch points. We are simulating the case where
the message is lost when the popup is closed by touch. Amends
efc02f9cc3
Pick-to: 6.4 6.3 6.2
Change-Id: Ic722e3dbd615c46076ede26611d0107501c5e274
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
More specifically, if either minimum or maximum size are updated, make
sure that the current window geometry is updated so that it is within
the minimum and maximum sizes.
Previously, these constraints was only respected by the window manager
when the user resized the window.
For widgets this already worked, because a top-level widget will take
care of respecting these constraints if they are changed.
Since QWindow::setMinimumSize and QWindow::setMaximumSize started to
share so many common things, a new function (setMinOrMaxSize_helper())
is added.
Task-number: QTBUG-102771
Change-Id: Ia4b2680dcf865f84a3cf6424187f9a6036b76386
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
