under windows, libraries can have a numeric suffix derived from VERSION,
and (under MinGW) a unix-like "lib" prefix - neither of which .prl files
have. therefore, we had to make the back-mapping from the library to the
.prl file reverse-engineer the original TARGET's name. we verify whether
we actually got the right file by comparing the target specified inside
the .prl file with what we started from.
this fixes linking of transitive deps of static deps.
the alternative of changing the .prl naming pattern to avoid the
back-mapping was discarded, as a) it would be backwards incompatible and
b) it would break project-internal -lfoo references to versioned libs.
Change-Id: Ia9b899fe6a5700fee528bd1dacf130caf083cdd6
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
if the file name contained no dot, but the path did, we'd chop up the
path in a final (doomed) attempt at locating a .prl file.
Change-Id: Iad72428d8523f2ea7e543faa58225fba4ffa358b
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
add a parameter that indicates whether the passed filename can be only
the basename of a prl file. if so, we can skip the other attempts at
interpreting the file name. that's not only faster, but also clearer.
Change-Id: I6f6da3f4485216021282a08acaefb53e60e7242a
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
move the logic for trying different extensions to
MakefileGenerator::processPrlFile(), which is the only user of that
functionality. that makes findLib() rather trivial and a bit of a
misnomer, so rename it to checkLib().
Change-Id: If9738cc17367452853ab8d3866fa36b5d4b57213
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
only .prl is actually supported (and we expect this to remain the case),
so just simplify the code.
Change-Id: Ia23f9f257bf89ca214c3deabd8a7744b155c7aa9
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
For some reason, the solution generator was looking for the xcodeproj
files in the source tree. It should look for them in the output tree
instead.
Task-number: QTBUG-69244
Change-Id: I7525886d614ddfdee705b27aacafc8f90a6f9d1d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
the code ensures that the path ends with a path separator, which is
unhealthy under mingw when the command ends with that path, because it's
interpreted as a line continuation.
the easiest fix is just duplicating the name of the moved file to the
destination side.
the cleaner fix would have been cleaning up the path separator mess, but
that's a more invasive change and doesn't seem worth it.
Task-number: QTBUG-69255
Change-Id: I338f8997b84ed7049b5665872dd25f90b9d4d16a
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Qmake accidentally replaced all occurrences of the library name in the
build path. This would lead to problems if the (shadow) build path also
contains the library name.
Task-number: QTBUG-69279
Change-Id: If99acccc779ff0874433b193be7e7fc53625b245
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
these characters can appear in file names, but are meta characters in
dependency context. they have different semantics in make commands, so
this required some reshuffling in the windows generator (which just
treated dependencies and commands the same way).
we don't actually escape colons for nmake, because it has magic
treatment of drive letters anyway (and colons cannot appear elsewhere).
also, if a target's filename gets quoted, batch rules will blow up.
therefore, "funny" file names are really only supported as inputs -
which is just enough to make resource embedding work.
Task-number: QTBUG-22863
Task-number: QTBUG-68635
Change-Id: I473b0bf47d045298fd2ae481a29de603a3c1be30
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The macOS framework build of Qt copies headers to each
framework instead of a centralized include location.
Update the .pc file generator to match this behavior.
Add two include paths to the .pc files:
-Ipath/to/lib/foo.framework/Headers
This makes #include <FooHeader> work.
-Fpath/to/lib
This makes #include <Foo/FooHeader> work.
Task-number: QTBUG-35256
Change-Id: I013ce161c904fe6b7bbb03e33c163d32fdda0647
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
/System/Library/Frameworks is now under system integrity protection
and is not usable for 3rd-party framework installs.
/Library/Frameworks continues to be a documented framework install
locaton.
Change-Id: I26f96ed57985218452ebbf9578e08f04b4e5cfd8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The QMAKE_MANIFEST variable was ignored for VS linkers that support
the /MANIFEST:embed option.
Task-number: QTBUG-59967
Change-Id: I1cdb60ec3a7a5f117942952d4632378ff142daa5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The default value for CONFIGURATION_BUILD_DIR includes EFFECTIVE_PLATFORM_NAME,
but when overriding it in 554e44b77 we only used the CONFIGURATION variable.
This left the .app in iOS builds in Debug instead of Debug-iphoneos,
breaking deployment from within Qt Creator, which had this directory
hard-coded.
We now include EFFECTIVE_PLATFORM_NAME to restore the original
destination for the .app bundle.
Task-number: QTBUG-68705
Change-Id: If304193d3e351e19fb84d250a62ae331af6966c6
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
The output directory may be the same as the source directory in
the case of an in-source build, but Xcode treats the SYMROOT as
a build directory, and automatically excludes it from Time Machine
backups, which may result in not backing up sources.
Instead we map SYMROOT to an .xcode subdirectory of the output
directory, and then use CONFIGURATION_BUILD_DIR to make sure
the final build targets end up where they used to.
Task-number: QTBUG-52474
Change-Id: I3852ca9088e75ca62fca4c1217b5485175d9436f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
the dependency paths are fixified against the output directory, so we
must resolve them accordingly.
Change-Id: Id92750aad358153bd2db5daca3194c54eda58dbb
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
We need to take into account the presence of a possible ',_debug' suffix.
Change-Id: I5655394b78723bbc6cc32e56849acc2366d288e2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
the source file must not be written with an absolute path to the
makefile, as this won't match the name of the target which generates it,
thus leading to an unsatisfied dependency.
this is the proper fix for QTBUG-60413 and a bunch of others.
amends historical f173e217cd.
Change-Id: I28140351c4b4759de35e60daf63bc54b82d104ec
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This fixes qmake-generated project files for Visual Studio 2017 for
setups where the Windows 8.1 SDK is not installed.
Task-number: QTBUG-66265
Change-Id: I67712019f7142e40262f171eb23f9f1e6ab3a251
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Miguel Costa <miguel.costa@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This ensures that the generated XCode project can correctly find any
files that are referenced via a path containing "..".
Task-number: QTBUG-35131
Change-Id: I049bc2279b4c515a82acd61142d25b8c240e8f6e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Removed the '!' from two comments because the functions being
documented are static functions declared and defined in the
.cpp file. They are not public.
Change-Id: Ie3b2c32c64102634b6b2a4c438da191536a426d6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
MSVC requires that the C PCH file is compiled (as an object) and linked if
any C file is found, and the same for C++.
Most qmake projects are C++.
If a C++ project has a precompiled header, it is typically of C++ type, and
cannot be compiled as C (for example, it contains or includes classes).
Since there is no easy way to conditionally build the C PCH file only if C
files are found in the project (as done for g++), we need a setting that is
disabled by default.
This amends 30331afda1.
[ChangeLog][Tools][qmake] Introduced precompile_header_c CONFIG option for
MSVC to enable precompiled header for C sources.
Task-number: QTBUG-65103
Change-Id: Id9688a35ee7d9b5e4f5a846b81986cb674bc5f4e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This ensures that the same set of variables can be successfully replaced
in both the Makefile and Xcode generators. It also switches the default
templates to use the Xcode-style ${var} syntax instead of the @var@
syntax for better Info.plist compatibility across generators.
Change-Id: Iff330bafd152773aafac9143c4a34e34f92f0ce6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Since Xcode 6.3, this must be set to NO because stripping on copy is no
longer fully supported due to the potential of input binaries being code
signed. In this case Xcode will simply ignore the strip step and issue
a warning since stripping would invalidate the code signature. This
change silences that annoying warning for release builds. Also, the
setting assignment is moved from being hardcoded in the generator, to
a QMAKE_MAC_XCODE_SETTINGS value.
Change-Id: If25511edddc12b7b0407e2992d80884b7d6437dc
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
This problem does not affect the Xcode generator.
Task-number: QTBUG-65477
Change-Id: I6194edc5b679edad9ae1a25e35b71e5df9bd4c95
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This was missed in 8bebded9.
Task-number: QTBUG-63637
Change-Id: I6be472430a9aa8f533def4fd6c14c8dbfe8b6f70
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
In Xcode, the default value for GCC_GENERATE_DEBUGGING_SYMBOLS is YES,
which causes Xcode to emit debug symbol bundles (.dSYM) on macOS and iOS
*if* DEBUG_INFORMATION_FORMAT is also set to dwarf-with-dsym. Since that
setting is already set to an appropriate value with debug vs release
builds, the default Xcode value for GCC_GENERATE_DEBUGGING_SYMBOLS is
already correct and in effect the only thing qmake was doing was always
setting GCC_GENERATE_DEBUGGING_SYMBOLS to a wrong value for release
builds - it should be YES in all cases, to allow the .dSYM bundles to
be generated in release mode, which is in fact the only case where
they're really needed in the first place.
Task-number: QTBUG-41246
Task-number: QTBUG-50896
Change-Id: I07639a3c4ff9f62d591cde3ad66748767d475e3b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This helps alleviate a performance issues where by building iOS based
projects takes a significantly longer amount of time than it should.
Task-number: QTBUG-59136
Change-Id: I77ae12f507725ceb11106b484d73bb7d46e0845c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This is C++, not qmake code. Amends 5fa6438633.
Change-Id: Ie5b88c3a06dbe089948488ea3b4b297a08164113
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
SYSTEM is used for system() calls, while SHELL is used in the target
Makefiles.
Task-number: QTBUG-62985
Change-Id: Ia75d3939c59c98699359421166433e8b4a6ee35e
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
All calls to QINSTALL or QINSTALL_PROGRAM were written into Makefiles
with a preceding dash which lets make ignore the command's exit code.
Scripts (and users) calling 'make install' had no way to determine if an
installation completely succeeded, unless they inspected make's output
or the installation tree.
Remove the leading dash from those commands to stop 'make install' on
failure. Users who really want to ignore the exit codes can run 'make -k
install'.
[ChangeLog][qmake] Installation targets do not ignore the exit code of
QINSTALL and QINSTALL_PROGRAM anymore.
Fixes: QTBUG-18870
Change-Id: I7c072c896e6bd2b2ddba4b9c082c5bf627c90f50
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Debug/release install targets can potentially install the same files which
leads to errors on install when running make with -j > 1.
If build_all is set, make the 'install' dependent of the new target
'debug-release-install' which contains the commands of 'debug-install' and
'release-install'.
Of course, debug/release is not hard-coded, but the content of the BUILDS
variable is used.
Change-Id: I67b504a95b83daf43bc89dcc0e3391b67e19c027
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
They will be deprecated, so qmake wouldn't compile anymore.
Change-Id: I42212fdf213df696d736ed34458f7e79bd902dd5
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Use the writeDefaultVariables method also for the
Win32MakeFileGenerator. Remove the initializations that are already done
in Makefile::writeDefaultVariables.
Change-Id: I590cc5d7031de67dd830e6113849ab080dbf2325
Reviewed-by: Christian Kandeler <christian.kandeler@qt.io>
Users should use range constructors instead to do the conversion.
Keep conversion methods between QList and QVector as these will turn
into a no-op in Qt 6, whereas forcing people to use range constructors
would lead to deep copies of the data.
Change-Id: Id9fc9e4d007044e019826da523e8418857c91283
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
As the non prefixed variants are deprecated
Change-Id: I2ba09d71b9cea5203b54297a3f2332e6d44fedcf
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
QRegExp includes can be found in several files where there's not even a
use of the class. This patch aims to avoid needless includes as well as
follow the "include only what you use" moto.
This patch removes a QRegExp include from the QStringList header which
means that there is likely going to be code breaking since QStringList
is used in many places and would get QRegExp in.
[ChangeLog][Potentially Source-Incompatible Changes] qstringlist.h no
longer includes qregexp.h.
Change-Id: I32847532f16e419d4cb735ddc11a26551127e923
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Conflicts:
examples/examples.pro
qmake/library/qmakebuiltins.cpp
src/corelib/global/qglobal.cpp
Re-apply b525ec2 to qrandom.cpp(code movement in 030782e)
src/corelib/global/qnamespace.qdoc
src/corelib/global/qrandom.cpp
src/gui/kernel/qwindow.cpp
Re-apply a3d59c7 to QWindowPrivate::setVisible() (code movement in d7a9e08)
src/network/ssl/qsslkey_openssl.cpp
src/plugins/platforms/android/androidjniinput.cpp
src/plugins/platforms/xcb/qxcbconnection.cpp
src/plugins/platforms/xcb/qxcbconnection_xi2.cpp
src/widgets/widgets/qmenu.cpp
tests/auto/widgets/kernel/qwidget_window/tst_qwidget_window.cpp
Change-Id: If7ab427804408877a93cbe02079fca58e568bfd3
It was already done correctly in the GCC generators, but lacked in MSVC.
Task-number: QTBUG-11117
Change-Id: I5e6c2e4802dbe33c0f15c46a227a08c3f0cc5707
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
A macro name ending in R might expand to a string; if this precedes a
string constant, we're juxtaposing the strings. My first parser for
raw strings would mistake it for a raw string instead, ignoring the
part of the identifier before R. Re-worked the exploration of what
came before the string to catch these cases, too.
The backwards parsing would also allow any messy jumble of [RLUu8]* as
prefix for the string; but in fact R must (if present) be last in the
prefix and *it* can have at most one prefix, [LUu] or u8. Anything
else is an identifier that happens to precede the string. Reworked
the parsing to allow only one prefix and not treat R specially unless
it's immediately (modulo BSNL) before the string's open-quotes.
Add link to the cppreference page about string literals, on which the
grammar now parsed is based.
Added a test for the issue this addresses.
Verified that this fails on 5.6, dev and 5.9 without the fix.
Expanded the existing test to cover R-with-prefix cases.
Task-number: QTBUG-55633
Change-Id: I541486c2ec909cfb42050907c84bee83ead4a2f4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The $${TARGET}_manifest.bak file was not removed on "nmake clean".
Task-number: QTBUG-59827
Change-Id: Ia5b636f4917f3e7a2df8d753824b72e63d278005
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
QMAKE_LINK_OBJECT_MAX is actually a property of the host, not the
target.
this works around binutil's inability to use thin LTO objects in
conjunction with an MRI script
(https://sourceware.org/bugzilla/show_bug.cgi?id=21702).
Task-number: QTBUG-61335
Change-Id: I90a1334b9c905c433b35546e8f3f3b5089d2c65b
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Task-number: QTBUG-59301
Change-Id: I2562b862465a52ecc56f551bcdb98fa7279ebfcf
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
If these rules are not added to the solution, Visual Studio will
complain, that the project has to be deployed before it can be run.
Change-Id: I6d3fbc949c85b11a92f78e13e2f6a1b92a5cfdc7
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
If several Makefiles are used in the same directory (for example, for
multiple projects in the same directory or different build configurations),
they all reference the same object_script, which is obviously wrong.
Change-Id: I9b499ceb6b6bd6058f54b452fa44bfb2313eec26
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
When generating a project, the directories can be specified as arguments
to the qmake call. As a result files can either be incorrectly added to
the project with a leading slash, or can end up duplicated. By passing
the absolute path with the file, it ensures that the file is added
correctly and no duplicates occur as a result.
Task-number: QTBUG-48342
Change-Id: If774de8d7f5cceca80042a25a3aa4e5b045249da
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This was already done on unix, but not for MinGW.
If the archive already exists, it is appended rather than replaced.
This can cause invalid references when whole-archive linking is used
and some object file that was already linked was deleted.
Change-Id: Ie265371f197d996d57002b248043736544ee641e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
adding shared install paths via QMAKE_LFLAGS in the spec has the tiny
side effect that they are searched _first_, which is generally a really
bad idea - they should be _last_.
for that purpose, introduce QMAKE_RPATHLINKDIR_POST, and migrate all
specs to use it.
QMAKE_RPATHDIR_POST is added for consistency, but not actually used.
Task-number: QTBUG-59457
Change-Id: Iac6cda5e9111ef8cca454a69861fe8408bb40589
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
adding shared install paths to QMAKE_{INCDIR,LIBDIR} in the spec has the
tiny side effect that they are searched _first_, which is generally a
really bad idea - they should be _last_.
for that purpose, make QMAKE_{INCDIR,LIBDIR}_POST live up to their names
(i.e., search them actually last) and migrate all affected specs to use
them.
Task-number: QTBUG-40825
Change-Id: Ie0de81c3cc49e193186d2fedd7d6c77590c8ef79
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Every /Zc:XXX option qmake doesn't know about yields a "WARNING: Could
not parse Compiler option '-Zc:XXX'; added to AdditionalOptions."
Put all /Zc:XXX options we don't handle into AdditionalOptions without
printing a warning. There's no point in making all options known to
qmake and updating them for every MSVC release.
Change-Id: I319e027791a7b0a29d139ee3074ab1aed8ce8a63
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
As the directory installation command also works with files as a source
we can unify the external commands, resulting in simpler command lines.
Change-Id: I65013626eedbdb3ce1c77ed230d46edd1603b986
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The same as for other visual studio versions use "x86" as arch instead
of win32. arch is used to determine library paths and these use x86 and
not win32.
As compilerArch is not used in MSVC 2017 it can be removed.
Task-number: QTBUG-60530
Change-Id: I47157eb1d7ae9d913461210d34858ffb37c81586
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Similar to the two parent commits, this patchs preserves the time stamps
of files we install as a result of recursive directory copying.
Change-Id: Id5931a467196d5cd67acfa0deffc2488af8a3669
Task-number: QTBUG-59004
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The result of "make install" should be the same regardless of whether it
has been run multiple times and the destination exists already. This is
done by making the file installation calls always take canonical source
and target paths and not look at the target directory.
Task-number: QTBUG-60370
Change-Id: I83a584c0dbc4fd10c79976d4169bf6bc051884a1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
As for the formatting code, de-duplicate the parsing code by only
parsing char*s, converting QChars to Latin-1 first in a small buffer.
The QUuid(const char*) ctor performed no length checking, relying
instead on the checks performed within _q_uuidFromHex(), which
includes an implicit check for premature end (because NUL is not
a valid token for the parser).
The (QString) and (QByteArray) ctors did perform length checking.
To the extent possible, this is removed, since it is handled by
_q_uuidFromHex(). Failure cases need not be optimized. Only the
QLatin1String overload needs to do some checking, because views in
general are not NUL-terminated. The QStringView overload can just
append a NUL when it converts to Latin-1.
The only check I added to _q_uuidFromHex() is that for src ==
nullptr. It would otherwise be duplicated in several callers.
While touching the internal functions, port to passing and returning
by value.
Saves 1.6KiB in text size on optimized GCC 6.1 Linux AMD64 builds,
even though we added new API.
Port some users to the new functions. Expand fromString() test.
[ChangeLog][QtCore][QUuid] Added fromString(QStringView/QLatin1String).
Change-Id: I519339419129550c86e0ea80514865cd6a768f5d
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The original commit only added support for GCC and Clang, but not ICC.
Amends 73331eeb
Change-Id: Id7638cf1b538edb1008fb3aa10754c1f517a994f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Similar to the parent commit, this patch adds a unified code path in
qmake itself for installing program files while preserving their
original last modification timestamp.
Change-Id: I7b7dcfa6228c2bfd48ea6036549398bb6f90032f
Task-number: QTBUG-59004
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
On non-windows platforms, we use the "-p" parameter of install(1) to
preserve the last modification timestamps of files. On Windows the use
of copy does not preserve them. As a cross-platform solution, this patch
introduces a simple built-in install command in qmake to copy files.
Task-number: QTBUG-59004
Change-Id: I3064d29a2b8c7b009a1efbf8f00b84c079ea5417
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
projects using a dynamic build are not supposed to access this variable
anyway.
Task-number: QTBUG-51598
Change-Id: I81b55ea9ba460b80919f40ed7fe3d52129636b9e
Reviewed-by: Michal Klocek <michal.klocek@qt.io>
Reviewed-by: Jonathan Liu <net147@gmail.com>
Due to that uninitialized variable /DEBUG:FASTLINK ended up in vcxproj
files for VS < 2015. However, that option is supported by VS >= 2015
only.
Task-number: QTBUG-59630
Change-Id: I34d9eef1a3bf2262bac48962938afe84eb7de934
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Adding the /utf8 compiler flag resulted in undefining all preprocessor
symbols for VS project files, because the ingenious compiler option
parsing logic checked for a 'u' prefix, and "utf8" obviously matched.
The /utf8 flag is added to the additional options, because there doesn't
seem to be an XML tag for that.
Task-number: QTBUG-59431
Change-Id: I762fcdcf6caf0606b40633861e265df5edb4a9c4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Adding both development team and provisioning profile to Xcode
switches off the automatic signing
Task-number: QTBUG-38782
Change-Id: Ic869e16490c11e369b6674c815e860cac66c5afa
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Call sites of NmakeMakefileGenerator::writeResponseFileFiles expect that
the output is terminated with '\n'. Do not bail out if files is empty.
Task-number: QTBUG-59305
Change-Id: Id3fef8dbc506dad1868e6b352119f5f27b50a368
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Linking with too many object files could lead to "LNK1170: line in
command file contains 131071 or more characters". Do not write all .obj
files into one line but respect a limit of 1000 characters. If the limit
is reached the object files are separated by newlines instead of spaces.
Task-number: QTBUG-58710
Change-Id: Ibae1f737d6b614a9624b4e00cdd21d3722d341e3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
in particular, -before (just for symmetry, as it's the default), -early
(the actual objective), and -late (for symmetry again).
Change-Id: I274303582a348b052c3e5106ff360ab4fd7d4ee2
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This ensures at compile-time that Qt libraries do not use any APIs that
are not safe for use in application extensions, and fixes warning
messages that appear when linking to Qt libraries that are not built
with this flag, when used in an application extension.
This is especially important on watchOS where *all* "applications" are
actually application extensions, and on other Apple platforms if
application extensions are developed using Qt.
Task-number: QTBUG-40101
Change-Id: I022046f2584e0222253d33052b0abc221d7c93d6
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
prelink was not supported at all for ar.
postlink was done for most cases, but missing in one particular ar
invocation.
Task-number: QTBUG-57276
Change-Id: Ic72c42a9502c97d7111b3f3941b387024d46a27d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
[ChangeLog][QtBase][General] Removed support for WinRT/Windows Phone 8.1.
Task-number: QTBUG-57288
Change-Id: Ifd6d6780cbbdb710d99556ba3d2fb2e514d4f789
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
These code paths have not needed to be exercised since Xcode < 3.2 was
dropped from support, which is beyond ancient at this point.
Incidentally, this removes use of a deprecated function.
Change-Id: I3e5a45794c21b434b31a48da8a8b0ff22f2852fa
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
When generating the Visual Studio project XML, the filter "Root Files"
was not being output. Specifically, this means that even if RC_FILE was
specified, it would not be included properly as a resource compilation
target in the resultant Visual Studio project file.
This is essentially a rather belated cherry-pick of qt/d6de960b7f.
Task-number: QTBUG-57914
Change-Id: I7d03dc818df0cf36608012f1a71a3a476d8a9ff7
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
the arguments after '--' are by definition meant only for the top-level
project, as that's where configure is invoked from. passing them to
sub-projects just adds noise to the make output and misleads users.
note that this specifically does not support qmake -r, which will break
if the subprojects rely on the arguments being absent. this isn't a
problem, because the qt build doesn't support qmake -r anyway.
Change-Id: I7ecff6212ce3137526005fc324a4a7ae45e3345e
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
now that configureapp does not use it any more, qmake is the only
remaining user. and the license headers already claimed that this code
is part of qmake ...
Change-Id: I9b8a16f8f2b432d2b1143efbdd1f0042305ccc0c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Before VS 2013 ToolsVersion contained a .NET version
number (e.g. "4.0"). Since VS 2013 ToolsVersion is the same as the
Visual Studio version number (e.g. "12.0"), which is also the default.
We always wrote "4.0" (except in one special case which used
"14.0"). This doesn't bother Visual Studio itself, but other tools
like PVS-Studio.
Remove the ToolsVersion attribute from generated VS projects for VS
2013 and newer.
Task-number: QTBUG-57694
Change-Id: I7a3bc4534c492e9540f6b968bee8a969980df63f
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Change dcd2f829 introduced fake files with the extension .cbt for custom
build tools that generate code from C++ source inputs. The moc_predefs.h
header file falls into this category, because it is generated from
dummy.cpp.
It turns out that these fake files have to exist. Otherwise the
custom build step is executed on every build. That means re-moccing all
mocables on every build.
Fix this by actually creating the fake .cbt files with some
explanatory comment in them.
Task-number: QTBUG-57695
Change-Id: I251294334425d9914677787d8ba6da1169b4cca5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
This tag was never spelled "PlatformToolSet". The correct spelling
is "PlatformToolset" (lower case s). VS itself can load qmake-generated
projects despite this misspelling, but tools like PVS-Studio are
bothered by it.
Task-number: QTBUG-57435
Task-number: QTBUG-57694
Change-Id: Ib70e8561f1827e195194bcf518445b2909a8d8c0
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
The phrase "which as been" lacked an h (albeit one silent in some
anglic dialects). The added letter made an already long line stick
out just a little more. Judicious rephrasing of the early part of its
sentence made reflow a way to fix that.
Change-Id: I29c2ac79d08a135dd4a16518f459872c8ecd1f24
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
eliminating everying TARGET-related was a nice try, but in the real
world (e.g., qttranslations), extra compilers are activated by
PRE_TARGETDEPS, which of course doesn't work when TARGET is entirely
gone.
so instead, let it act as a phony target. this is consistent with the
unix generator.
supersedes 0810d48bc in amending af2847260.
Task-number: QTBUG-57423
Change-Id: I3d2ecc4ff42b37ffe5f71f5c20d17c06b31f4da2
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
For QMAKE_EXTRA_COMPILERS with inputs that are "buildable" (e.g. C++
sources) the custom build step is added to the output file. From Visual
Studio's point of view this looks like a circular dependency (e.g.
foo.moc generates foo.moc). Usually this just prints a warning that can
be ignored. But this circular dependency also breaks dependencies
between custom build steps. This became noticeable when the generation of
moc_predefs.h was added. Generating moc_predefs.h must be done before
any moc custom build step is executed.
This patch fixes the issue by using fake files (output file plus suffix
".cbt" for "custom build tool") that act as dummy inputs for the custom
build tools.
Task-number: QTBUG-16904
Task-number: QTBUG-57196
Change-Id: I4711e44a0551046d215db151fa0312af8a9177a2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
it's wrong to use the escape function for makefiles, as the command
goes directly to a popen() call.
Task-number: QTBUG-57343
Change-Id: I34a8e4d8fb406303c593e7c1e24019e0f756e7f8
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
The values of this hash are strings, not lists of strings.
Enforce this by using the proper type instead of just using a comment.
Change-Id: Id8a13acdceb8f9f8a9a8eaa04e790b1e6cd5faa7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
of course, we should stub out everything related to TARGET - only the
generic "all" and "first" targets including their deps should be
emitted.
amends af2847260.
Change-Id: I8ed7a550b8022c69328d2e16dbd078928d176964
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
actually pack the extra compilers' input files, not the variable names.
unlike on unix, we don't create an actual distdir, so the package is
still going to be rather broken.
Change-Id: If0a15bbe9db95aebd88c2a21ca3c0f787ce5c7e1
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
that is, adjust path separators and don't quote them. we already did
that to some degree, but totally inconsistently, so it just didn't work
for any targets with "fancy" file names.
note that we don't bother doing that for recursive targets, as these are
assumed to be identifiers.
Change-Id: Ic75f003b71abc6fed03a4121b903ad5ee8253ed2
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Replace which_dotnet_version with a simple function that converts the
value of MSVC_VER to its corresponding enum value in the VS project
generator.
This reduces the maintenance burden when adding support for a new VS
version, because we do not need to update the registry keys in
which_dotnet_version anymore.
The which_dotnet_version function implemented the following logic:
- find all installed VS versions via registry
- select the "best matching one"
- if there is no best match, select the VS that's in PATH
- create a project for that VS installation
The usefulness of this whole stunt is questionable as the VS version of
Qt's mkspec must match the version of a project using that Qt anyway.
Change-Id: I9fb9a099ee5ddb5fc4c450be4f68f41f2b406b9a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
On the way to get rid of this function.
Have one place to determine the VS version instead of calling
this function over and over again (even though all calls but
the first are cheap).
Change-Id: Ic42a65df5a9bbe289f4813e4db85000dba15e672
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Make qmake understand the /DEBUG:FASTLINK option in QMAKE_LFLAGS, and
write the corresponding value correctly to VS 2015 project files.
Task-number: QTBUG-55591
Change-Id: I670375ed1523a5ab96bb3cce28635785564edba8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Commit 3d3d65f5 separated the PDB files for compiling and linking. Only
the PDB file the linker produces would be installed. However, this does
not work for static libraries as the LIB tool does not create a PDB file
from the compiler's PDB file. This patch turns the separation between
PDB files off for static libraries.
Task-number: QTBUG-56594
Change-Id: I08dcb7889c67b2f6370efa1ee19be8558355bbc9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Following the discussion at QtCS 2016 about deprecated APIs,
let's enable the warnings by default.
Change-Id: I73fe63de3e4f755067100320d7497b6b227549b6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Slims down QCFString and leaves only one implementation of converting
back and forth between CF/NS strings and QStrings.
Change-Id: I068568ffa25e6f4f6d6c99dcf47078b7a8e70e10
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
With the removal of Windows CE support(52623d6d) the logic of these
checks have changed, as it was always true for non Windows CE builds
before.
This did not affect WinRT, as those mkspecs define VCPROJ_ARCH
explicitly in their qmake.conf.
Task-number: QTBUG-55753
Change-Id: Ie2eddf197c17fcbf7343b444cfe8940a332a545c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This version now prefers non-free provisioning teams, since the latter
seem to be problematic in more cases.
Task-number: QTBUG-55915
Change-Id: Ie40ddae5e333acdd5327ed46992fb4fb300dee25
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
5971b88e is not needed in new configure.
This merge also reverts "fix QMAKE_DEFAULT_*DIRS resolution with
apple SDK", 2c9d15d7, because it breaks iOS build with new
configure system.
Conflicts:
mkspecs/features/default_pre.prf
mkspecs/features/mac/toolchain.prf
mkspecs/features/toolchain.prf
src/dbus/qdbusconnection.cpp
src/plugins/sqldrivers/mysql/qsql_mysql.cpp
src/sql/drivers/mysql/qsql_mysql.cpp
src/widgets/widgets/qmenubar.cpp
src/widgets/widgets/qmenubar_p.h
tools/configure/configureapp.cpp
tools/configure/environment.cpp
tools/configure/environment.h
Change-Id: I995533dd334211ebd25912db05b639d6f908aaec
Parsing the other files will (re)generate the same metaobject info in two places
Change-Id: I8984ed30751a7587de870f55dd427f067d1b2495
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
The actual blocker for precompiled headers is not the iOS/tvOS/watchOS
platforms, but the way qmake handled multiple-architecture builds on
Apple platforms.
This patch allows multi-arch builds to be performed while using
precompiled headers.
Since df91ef3d6c55692a0236f67b6c6b134a3bf84098 (April 2009), Clang has
had support for PCH files in the driver, which allows to use the
-include flag to automatically translate to -include-pch. We can then
take advantage of the fact that the -include option is allowed to not
be separate from its argument, which lets us take advantage of -Xarch to
specify a per-architecture precompiled header file.
This is done through some magic in the qmake Makefile generator which
"multiplexes" the PCH creation rule across multiple architectures and
replaces a series of tokens with the proper precompiled header paths
and architecture flags at usage point.
Change-Id: I76c8dc9cda7e218869c2919f023d9b04f311c6fd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This makes the Xcode generator smarter so that it recognizes when
a QMAKE_BUNDLE_DATA entry is attempting to embed a framework,
dynamic library, or plugin into the application bundle, and
places it into the correct generated PBXCopyFilesBuildPhase.
Change-Id: I67ac1534a0521eecfc90537db6f9aca2bdbc96b0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
This fixes a bug where joined device and simulator builds would get
for example, QtCore_iphonesimulator as the CFBundleExecutable.
According to Apple:
"For frameworks, the value of this key is REQUIRED to be the same as
the framework name, minus the .framework extension."
This does not affect the ability to load a framework whose executable
name differs from the bundle name (as is the case for simulator builds),
as the application will be linked to the correct framework executable
at link time by specifying (for example) the linker flag:
-framework QtCore,_iphonesimulator
Change-Id: Ib7614670d0620e0235cd7e2606d42dd034a90c68
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
the inherited arguments may contain the '--' argument, which turns
additional arguments into configure arguments. the simplest fix for
that is injecting additional arguments at the front, not at the end.
Change-Id: I7cc00a42f0148e5ccbbeda2ad59fa8c63749f02d
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Plugin bundles are not frameworks, so this fixes the case where a lib
template with plugin and lib_bundle in the CONFIG would be mistaken
for a framework bundle, which has a different filesystem layout and
handling.
Change-Id: I9ce9daf22d4e3de70bfe7bc8bb219068de0bca42
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This is a prerequisite for properly constructed framework bundles.
On certain Apple platforms (iOS, tvOS, watchOS), bundles are used
in "shallow" format, meaning that the directory structures are
flattened compared to the one used in macOS bundles.
shallow_bundle allows the difference to be expressed independently
of the platform. Note that the term "shallow bundle" is used by
Apple in Xcode internals.
Change-Id: I1189c52b0ea66843c313783176c11cc2af97ad25
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
MakefileGenerater::Compiler is larger than a void*, so holding
it in QList is horribly inefficient.
Fix by using QVector instead.
Change-Id: I9ea173271caf9b4995d311c3864c6967da049380
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
It's empty, but non-trivial, thus preventing move special member
functions from being generated by the compiler (now that qmake
is compiled as C++11, too).
The default ctor was also empty - removed, too.
Change-Id: I714db524f681f1fc250d21926245757e97351e87
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Has a few too many fields for defining a member-swap
(which would be required to mark it shared).
Change-Id: Iecbeec9e60a9884cb4a984c58cb192918cef799d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
It's empty, but non-trivial, thus preventing move special member
functions from being generated by the compiler (now that qmake
is compiled as C++11, too).
Change-Id: I7e4b6d7f604020dd5e6da81f7a046202c8b78e09
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
It's empty, but non-trivial, thus preventing move special member
functions from being generated by the compiler (now that qmake
is compiled as C++11, too).
Change-Id: I9431311d24da802f147ce10e475936838bb85d41
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
It doesn't save any memory, generates worse code, and
prevents a member-swap from being added.
Change-Id: Iddc0f1338478e465f34076857e266f1912fbaba6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Visual Studio automatically defines _WINDLL when building a DLL,
regardless of project settings
(https://msdn.microsoft.com/en-us/library/8x480de8.aspx). This define
is therefore widely used to detect DLL vs. static library or executable
build target on Windows.
For makefiles, _WINDLL need to be manually defined, which QMake failed
to do so far.
Task-number: QTBUG-55183
Change-Id: Ic62201666c44e730e6881706d568ce9eaf22b7a4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This was only used to specify XP as a target which is
not supported on 5.8 anymore. Clean up all associated
special handling in the mkspecs and pro files.
This effectively reverts change 10a0ac75.
Change-Id: I420d73002912989f1a5be961a2d09277ec4a4425
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
And blacklisted a few tests in tst_QUdpSocket.
Conflicts:
src/android/jar/src/org/qtproject/qt5/android/QtNative.java
src/corelib/global/qglobal.cpp
src/corelib/global/qsystemdetection.h
src/corelib/io/qfileselector.cpp
src/plugins/platforms/eglfs/deviceintegration/eglfs_kms_egldevice/qeglfskmsegldeviceintegration.cpp
tests/auto/network/socket/qudpsocket/BLACKLIST
Task-number: QTBUG-54205
Change-Id: I11dd1c90186eb1b847d45be87a26041f61d89ef6
A bug in the Windows C Runtime causes text mode pipes to drop newlines
sometimes. This bug was hidden because of another bug in rcc which
caused newlines to be redundantly duplicated. When the latter bug was
fixed (commit 53d5811b) the former bug was exposed, causing invalid
vcxproj files to be generated. The Windows bug is described here:
https://connect.microsoft.com/VisualStudio/feedback/details/1902345
The workaround is to avoid text mode, and do the conversion of "\r\n"
to "\n" ourselves (which we were already doing anyway).
Change-Id: I792599a4cd7822f109fa921f02207fb1b144b1d1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This resolves an issue where qmake would generate a Makefile with an
install command immediately followed by a test command, with no
intermediary newline and tab to separate them.
Task-number: QTBUG-54035
Change-Id: I7f9226f25e92b49ce689d252e9c4a58b877f2972
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The two PDB files that the MSVC compiler and linker create are supposed
to be handled differently and should not share the same file path.
Using the same file path for both can result in corrupted PDB files and
longer build times.
Use $${TARGET}.vc.pdb in the OBJECTS_DIR for the compiler and
$${TARGET}.pdb (the default) for the linker.
Task-number: QTBUG-53895
Change-Id: I31f06d4a674a3aa2afe5b30499bae820e5caf2c4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
this introduces an ambiguity, so some char* arguments need explicit
QString construction now.
Change-Id: Ic3919a1fa9419bbb3b57dd1aa7eb95643ee59e53
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
While previous SDKs used the form "CE_SDK (CE_ARCH)" in their
configuration/platform names, this is not true fo the Toradex SDK.
Inside Visual Studio the platform is only called "Toradex_CE800"
instead of "Toradex_CE800 (ARMV7)".
In order not to break other SDKs CE_PLATFORMNAME is introduced and
used in the wince80colibri-armv7-msvc2012 mkspec. If the variable
is set qmake uses it as the platform name in its vcproj generator.
Change-Id: Icb501bf6446a9f617745a0d2c7a80b240680b043
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Pass -xplatform macx-tvos-clang to configure to build.
Builds device and simulator by default.
Added ‘uikit’ platform with the common setup.
Also added QT_PLATFORM_UIKIT define (undocumented).
qmake config defines tvos (but not ios).
tvOS is 64bits only (QT_ARCH is arm64) and requires bitcode to be
embedded in the binary. A new ‘bitcode’ configuration was added.
For ReleaseDevice builds (which get archived and push to the store),
bitcode is actually embedded (-fembed-bitcode passed to clang). For all
other configurations, only using bitcode markers to keep file size
down (-fembed-bitcode-marker).
Build disables Widgets in qtbase, and qtscript (unsupported,
would require fixes to JavaScriptCore source code).
Qpa same as on iOS but disables device orientation, status bar, clipboard,
menus, dialogs which are not supported on tvOS.
Change-Id: I645804fd933be0befddeeb43095a74d2c178b2ba
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Port the last four remaining Q_FOREACH users in qmake
and uic to C++11 range-for and mark all qtbase tools
(incl. qmake) as Q_FOREACH-free, using QT_NO_FOREACH.
Change-Id: Ief4e5877269e7a853e4cf05e58861a448e822d3d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
- QMAKE_FILE_IN_EXT as an alias for QMAKE_FILE_EXT, for consistency with
QMAKE_FILE_IN_BASE
- QMAKE_FILE_IN_NAME to make pairing _EXT/_BASE to get a full name
unnecessary (finally ...), and make use of it
- QMAKE_FILE_OUT_PATH, because i'll need it
Change-Id: I3d91ddb84f9cce52a665d562da11d165c92550c8
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
it's beyond me why they shouldn't be.
Change-Id: I2493469636e4f196bfeb2eb00a691aeae0f1881d
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
CID 155005: Possible illegal access in string. Some loops were
reading the buffer without checking the bounds.
Change-Id: I910671a6d56808138ec2bb5d96bd7edf78b20f73
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
CID 21629: The QMakeProject::read result was ignored.
MetaMakefileGenerator::createMakefileGenerator will be called if the
project was read.
Change-Id: I9187c82efd1abedcaa8e394f1fdb0b7f35a2b1d7
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Xcode does not recognize "<Group>" with a capital G, only "<group>" with
a lowercase g. As a result, paths of files within these groups are
calculated incorrectly. For example, dragging any external file into the
Xcode project would result in its leading slash being removed (while
still treated as an absolute path - broken reference). Furthermore, the
dropdown in Xcode displayed the Group location as an invalid string
instead of the correct "Relative to Group". This patch restores correct
behavior.
This fixes a regression introduced in
f09ec09c208c75a16abe05b6bb505a1fc58775a6.
Task-number: QTBUG-52701
Change-Id: I9af5360049a79e7958301e4090a9a542bab0af8c
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
