On systems that asynchronously resize the window to maximized or full
screen state, the window will become visible in its normal geometry
before it gets the final size by the windowing system. This might cause
multiple resize events, to each of which the widget's layout responds
with a call to its setGeometry implementation.
The QMainWindowLayout is special in that it will shrink dock widgets if
there is not enough space for them, but it doesn't grow them back once
there is. With the initial resize event being for a smaller size than
what was restored, the state is not restored correctly, but remains in
the state that fit into the smallest size with which setGeometry got
called.
To fix this, we have to keep the restored state around until the window
either gets a size that is large enough for it to fit, or until we can
be reasonably certain that the windowing system is done resizing the
window while transitioning it to the maximized or full screen state.
Since across the various platforms and windowing systems there is no
reliable way to know when the window reaches its final size, we have
to use a timer that we (re)start for each call to setGeometry with a
size that's not large enough. Once the timer times out, we have to
give up; then the last layout state calculated is the final state.
To calculate the size of the layout, introduce a function to the
QDockAreaLayout that returns the size required for the current sizes
of the docks. Refactor sizeHint and minimumSize (which were identical)
into a helper template that takes member-function pointers to call the
respective method from the dock area layout's content items.
Add a test case for various permutations of the scenario. The timeout
of 150ms is based on running this test case repeatedly on various
desktop platforms and X11 window managers.
Fixes: QTBUG-46620
Change-Id: I489675c2c40d3308ac8194aeb4267172b2fb38be
Reviewed-by: Albert Astals Cid <albert.astals.cid@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
- getgid/getpwuid are not supported
- process should be used with config check
Task-number: QTBUG-96176
Pick-to: 6.2
Change-Id: Ib6854772bcf52f3533cb722f963426717926258b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- Under a list item, we've been indenting code blocks:
```
int main() ...
```
- But it's also ok *not* to indent (and github handles that better):
```
int main() ...
```
- There was a bug that when the code is not indented, the fence would be
indented anyway:
```
int main() ...
```
and that was not OK, neither for md4c nor for github.
Now with this change, either way is rewritable: you can read markdown
into QTextDocument, make small edits and write it back out again, with
the indentation being preserved (the code block is either part of the
list item, thus indented, or else it's outside the list completely).
Pick-to: 6.2
Task-number: QTBUG-92445
Change-Id: I5f51899e28ba9f09b88a71e640d9283416cce171
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Cocoa sends QWidget the state-change notification after the window has
been resized already, at which point we cannot store the normal geometry
anymore.
Handle zoom and full screen callbacks prior to the state changing
to store the geometry in QCocoaWindow. We do not need to handle
minimized state, as the window will still reflect the original
geometry.
Return the stored value from an override of
QPlatformWindow::normalGeometry so that QWidget gets the correct values
even though the new state is already active.
Fix the tst_QWidget::normalGeometry test to make it pass on all
platforms by waiting for the window to actually have transitioned to
the new state before comparing geometries. Both macOS and Windows fully
pass; on Xcb, deminimizing a window using setWindowState does not work,
which is why the test was partially skipped (confirmed by visual
testing). Move those problematic, complex test cases to the end so
that most cases are covered on Xcb as well.
Done-with: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Pick-to: 6.2
Change-Id: I518a5db9169b80e8fa25fe4fa2b50bd1ea0e6db3
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Doing so results in bailing out early for a widget that hasn't been
shown yet, or otherwise resulted in creating extra and topextra,
which means the normalGeometry will not reflect the widget's geometry.
Pick-to: 6.2
Change-Id: Ieb85e9a6109ae34fe20d79e3c12f4517f827a590
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
[ChangeLog][QtGui][CSS] The background-color style can now be applied to
<hr/> to set the rule color.
Task-number: QTBUG-74342
Change-Id: Ib960ce4d38caa225f258b6d228fb794cef43e1b7
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Since commit 7ba75d0 we close the QWindow in QWidget::close for native
widgets and trigger the closeEvent in QWidgetWindow. However, if the
widget's window handle is not a top level window, QWindow::close()
will not close the window, failing in this way to deliver the
closeEvent and call the close handling in QWidgetPrivate::handleClose.
To fix, call handleClose() from QWidget::close for such widgets.
Task-number: QTBUG-74606
Pick-to: 6.2
Change-Id: Ied342eced3340aaf19b5443762935b1a5fc5c27b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Being a test, I'm going to abuse operator-> on end() to check
that we get what we want (a pointer past the end).
Change-Id: I7ab8d017b0fe320018820eff336d496328ade481
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The signal is emitted from QGuiApplication these days.
Pick-to: 6.2
Change-Id: I7423cd4808e8df86960f225fd6e4a12a1a4f11f3
Reviewed-by: Doris Verria <doris.verria@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This hasn't worked for some time. It's not in our CI and I don't think
it was working at all. When I tried to build it, I ran into several
problems with C++17 and an Internal Compiler Error I did not have any
interest in working around.
After discussing with the Intel compiler team, it was decided that
fixing those issues in the old compiler is not going to happen. Instead,
their recommendation is to adopt the new LLVM-based compiler, which
the last commit added support for.
This commit does not remove qmake support for the old ICC. It's possible
someone is using qmake with a non-Qt6 project and ICC.
Change-Id: Icb2516126f674e7b8bb3fffd16ad6350ddbd49e5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
QAbstractScrollAreaPrivate::layoutChildren() positions the viewport, but
did not take the overshoot from scrolling with a scroller into account.
If the scroll area was resized during a scroll, then this resulted in the
roll back overcompensating for the overshoot, placing the viewport outside
the visible area.
Fix this by taking the overshoot into account when positioning the
viewport.
Add a test case. We have to use QWindow-based mouse event simulation, as
the QWidget based move events use QCursor::setPos, which doesn't reliably
go through the gesture framework.
Done-with: Volker Hilsheimer <volker.hilsheimer@qt.io>
Done-with: Zhang Hao <zhanghao@uniontech.com>
Fixes: QTBUG-94769
Pick-to: 5.15 6.2
Change-Id: Idf650c91e5a9cffa996e23e743939243b1d4fcc0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This define used to be set for the entirety of the Qt build but
was lost during the qmake->CMake transition. Re-enable it.
Change-Id: Idc4cb6ada485158559485b60f62f76439550b255
Pick-to: 6.2
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
This was handled correctly when the backend supplies transitions
bracketing the time in question, but the fallback code tried to use
the DST offset at the time with larger offset from UTC; this did not
work when the gap was due to a change in standard time. Discovered by
ANS1 parsing of a date-time with two-digit year, for which the
date-time parser tried to use 1921-05-01T00:00 local time when filling
in the fields it had parsed; but, when run in Europe/Helsinki, there
is no such time due to the 20m 11s skipped when joining EET from the
prior local solar mean time.
Correct the calculation to use the actual change in offset from UTC,
as used in the (far better tested) between-transitions branch of the
code, rather than the DST offset after the transition.
Add a test-case based on the ASN.1 certificate date whose parsing
revealed the issue. Although it seems nothing in Coin can reproduce
the issue, the reporter has verified that the test does indeed fail on
the system where the bug was found and the fix does fix it.
Fixes: QTBUG-96861
Pick-to: 6.2
Change-Id: I12b02bad01daca2073d1a356452cd573684aa688
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When parsing CSS, a border-color value is parsed as four brushes, as css
allows assigning up to four values, one for each side.
When applying the CSS to the HTML, we accessed it as a color value,
which overwrote the parsed value with a QColor. So while we had a valid
parsed value (and didn't re-parse), the code accessing that value still
expected it to be a list, and thus failed to retrieve the data.
There are several ways to fix that, but the cleanest way without
introducing any performance penalty from repeatedly parsing (and in fact
removing a parse of the string into a color) is to enable colorValue to
interpret an already parsed value that is a list without overwriting the
parsed value again. To avoid similar issues in the future, add assert
that the parsed value has the right type in brushValues.
As a drive-by, speed things up further by making use of qMetaTypeId
being constexpr, which allows for it to be used in a switch statement.
Add a test case.
Fixes: QTBUG-96603
Pick-to: 6.2 5.15
Change-Id: Icdbff874daedc91bff497cd0cd1d99e4c713217c
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Because of the addition of the operator T*(), the expression "it + N"
where N was not exactly qsizetype but any other integer type was a
compilation failure because of ambiguous overload resolution.
With GCC it's apparently a warning:
warning: ISO C++ says that these are ambiguous, even though the worst conversion for the first is better than the worst conversion for the second:
note: candidate 1: ‘QList<T>::iterator QList<T>::iterator::operator+(qsizetype) const [with T = char; qsizetype = long long int]’
note: candidate 2: ‘operator+(char*, ptrdiff_t {aka long int})’ (built-in)
With Clang, it's an error:
error: use of overloaded operator '+' is ambiguous (with operand types 'QList<int>::const_iterator' and 'ptrdiff_t' (aka 'long'))
note: candidate function
inline const_iterator operator+(qsizetype j) const { return const_iterator(i+j); }
note: built-in candidate operator+(const int *, long)
Pick-to: 6.2
Fixes: QTBUG-96128
Change-Id: Ie72b0dd0fbe84d2caae0fffd16a06f23dd56b060
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
The test passes, the functionality is implemented in QCocoaWindow.
Task-number: QTBUG-8857
Pick-to: 6.2
Change-Id: I2f4b3a39cec1aaaf4351753b590f35e280503461
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
- when there is no intersection between the current selection and the
spans collection, get ranges for all cells, just as if no span exists
- when there is an intersection between the current selection and the
spans collection, get separate ranges for each cell (as before)
This fixes the regular case of selecting multiple non-spanned cells
after some cells are merged (get a single range for all cells instead of
separate range for each cell). However, when selecting together a group
of spanned and non-spanned cells, you still get a separate range for
each cell. But this is normal behavior in similar applications; for
example in LibreOffice, you cannot select and merge spanned and
non-spanned cells: an error dialog tells you that it's not allowed.
Done-with: Christos Kokkinidis
Pick-to: 6.2
Fixes: QTBUG-255
Change-Id: Ic38f9a064a1f499825e7f750668013fc2dc564ba
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Add operators as hidden friends, add test case to make sure that
basic value-type operations are possible with this type.
Task-number: QTBUG-255
Change-Id: I7fbf453aa16084c0b2a0079487cacb4e092ff664
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Less clunky due to having better constexpr support, plus fold
expressions.
Change-Id: I3eb1bd30e0124f89a052fffd16a6bc73ba79ec19
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
They return a pointer to the actual header, skipping the magic string.
This is done in preparation for the header located in an ELF note, which
won't have the magic.
Change-Id: I3eb1bd30e0124f89a052fffd16a8229bec2ad588
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The .qtmetadata section is already suppressed for static plugins, but we
carried this unnecessary magic string. For library file formats where we
don't have a scanner (Windows COFF PE), a library that linked multiple
static plugins could end up with multiple metadata found.
We can't suppress the header because the version of moc could be
different to the version of Qt, so we need to read the header version
too. Right now, the version isn't output by moc (all the logic is in
qplugin.h), but this could change again in the future. In any case, 4
extra bytes are not a big deal, so the header stays.
Change-Id: I3eb1bd30e0124f89a052fffd16a82088d8303081
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The skip-reason only cites Qt/X11. Convert the #ifdef into a platform
name check instead. The test also fails with the offscreen plugin, so
skip it for that as well.
Pick-to: 6.2
Change-Id: I49607b89f4b32359e81e1d9aadff2c3e03035c53
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
QDialog overrides setVisible to set focus on the default push button, or
(if there is no such button), make the first autoDefault push button the
default button. QDialog also explicitly sends a FocusIn event to the
focus widget in the dialog.
All this should not be done if the dialog does not become active after
getting shown, which will be prevented if the WA_ShowWithoutActivating
attribute is set.
Add a test case.
Fixes: QTBUG-8857
Pick-to: 6.2
Change-Id: If47021a4721a280ba45e95b43d0424cdacd9b4ea
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
For a widget that implements height-for-width, the vertical scrollbar
becoming visible might be just enough to make the scrollbar unnecessary.
In that situation, the scrollbar flips on and off continuously.
To avoid that situation, make the width of the widget smaller until the
height fits without scrollbar, up to the point where we have space for
the scrollbar anyway.
The calcuation here is assumed to be cheap, but depends on the
heightForWidth implementation in the widget. Running the while-loop a
few dozen times should have no performance impact during resizing
and laying out the scroll area contents.
Add a test that confirms that within a brief period of time we only get
the one hide-event we expect.
Done-with: Zou Ya <zouya@uniontech.com>
Fixes: QTBUG-92958
Pick-to: 6.2 5.15
Change-Id: I0faeb5f9b1a226aada958c18333d9c2ac8203dd1
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Previously, when deciding where the actual data is, Frame was calling
padding() to test if offset is needed. A curious case with a DATA frame
containing compressed body and having 'PADDED' flag set with a padding
equal to ... 0, ended in a decompression error (and assert in 6.2 code).
Pick-to: 6.2 5.15
Fixes: QTBUG-97179
Change-Id: I9341a4d68510aa4c26f4972afdcd09a530d5a367
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
When setCurrentIndex is called by removeTab, the old current index
might no longer be valid. Only update the lastTab value of the new
current tab if the old current index is still valid.
As a drive-by, use the validIndex helper function.
Fixes: QTBUG-94352
Pick-to: 6.2
Change-Id: I945e2093a90a1fccbba86d32b1113f83fedd41de
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Unify cancel and finish in QPromise destructor in a single call. This
saves us one extra mutex lock and atomic state change.
Task-number: QTBUG-84977
Change-Id: Iac06302c39a2863008b27325fcf6792d4f58c8ae
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
On a mobile device, selecting text in a line edit brings up the text
action popup for select/copy/cut. In a spinbox where the user changes the
value using the buttons, this can be very irritating, without providing
any usability - the user is unlikely to start typing, at least not
without first transferring focus into the lineedit first to bring up the
keyboard.
This style hint allows styles to override the default behavior of
QAbstractSpinBox. Implement the customization for the Android style, and
add a test case for QSpinBox.
[ChangeLog][QtWidgets][QStyle] A new style hint, SH_SpinBox_SelectOnStep,
specifies whether pressing the up/down buttons or keys in a spinbox will
automatically select the text.
Fixes: QTBUG-93366
Change-Id: If06365a7c62087a2213145e13119f56544ac33b5
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
I staged the manual test a little too soon, forgetting it's not compiled
in CI
Change-Id: Iaae8b8caaf8433c45e66ff662bb9bb7b25a3b8bd
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The new public API returns and notifies changes to the currently active
transport medium for the application. And there's a new private API to
report it, with backends to follow.
Task-number: QTBUG-91023
Change-Id: I527985f9dabcd7bc4a32f36597e21bc4ab664c4e
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
On macOS, when showing a window, we decide if it should be made
key and therefore active, if the app has no active modal session
or if the window's worksWhenModal returns true.
However, the window needs to be made key also when a modal window
is present, but not visible. Add this condition when checking if
the window needs to be made key.
This makes the behavior consistent with what happens when a modal
is minimized on macOS. The input focus is passed to the next window,
and the window appears active, even if it can not be interacted with.
Fixes: QTBUG-85574
Pick-to: 5.15 6.2
Change-Id: I204d4f912128f4a46840789fc2ee08e1b2716bfc
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
For now it only has a trivial test (empty) and an all-surrogate test
(Chakma digits) - but at least now all conversions to and from UTF-16
are tested. In particular, there were previously no UTF-32 tests.
Pick-to: 6.2
Change-Id: I9317928a88b9990530126db80e4756b880a364df
Reviewed-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Closing a window with a native child results in the native child's
QWidgetWindow being closed. That explicitly calls setVisible(false)
on the child, which will still have the ExplicitShowHide attribute
set from the initial (explicit) show. Even though we then reset
the ExplicitShowHide, the WState_Hidden attribute will still be
set, so Qt considers the window to have been hidden, and not show
it again when the parent becomes visible.
Add a test case.
Fixes: QTBUG-96286
Fixes: QTBUG-79012
Fixes: QTBUG-71519
Change-Id: I482e6d5236c959d82ce66798176b259a3176972c
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Remove dead code
Make logic to position test widgets more consistent across test functions
Consistent cursor positioning logic
Get rid of unnecessary event processing
Reduce calls to qWait with hard coded values
Use qWaitFor to establish asynchronous preconditions
Ignore expected warning messages
Expect-fail (instead of blacklist or skip) some tests that always fail
Ignore unpredictable events in childEvents test
Split large "render" test in multiple test functions
Task-number: QTBUG-52974
Task-number: QTBUG-26424
Change-Id: I206e114c2c1d9801e08600d3341c2738dc881f17
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
There already was an attempt, but the wrong variable name was used.
Pick-to: 6.2
Change-Id: I4bdd73f86ff6aa5151e4427024b83daa57b54a39
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Craig Scott <craig.scott@qt.io>
This rewrite uses the actual structures supplied by the system's C
library, so it should be easier to read. It removes hardcoded constants
with little evident meaning in favor of sizeof() and the macros from
that header. It also removes advancing the data pointer in favor of
having absolute offsets.
The resulting implementation is stricter than the original, checking
more fields in the header. Because the QPluginLoader and QFactoryLoader
users may make decisions based on availability of plugins before
attempting to load them, it's better to be stricter here than to fail
later when trying to dlopen() them.
Debugging and testing are much improved. Instead of stored artifacts, I
added a routine to modify a valid plugin to make it invalid, given the
conditions we've found so far.
If you turn debugging on for this category, you'll see things like:
not-elf.fcqdMq.so : Not an ELF file (invalid signature)
wrong-word-size.QrnSAx.so : ELF 32-bit LSB (GNU/Linux), version 1, shared library or PIC executable, x86-64
invalid-word-size.bOkXvp.so : Invalid ELF file (class 0), LSB (GNU/Linux)
unknown-word-size.ogYKeF.so : Invalid ELF file (class 66), LSB (GNU/Linux)
wrong-endian.owiElX.so : ELF 64-bit MSB (GNU/Linux), version 1, shared library or PIC executable, x86-64
invalid-endian.FRxClR.so : ELF 64-bit invalid endianness (0) (GNU/Linux)
unknown-endian.FfvRrP.so : ELF 64-bit invalid endianness (65) (GNU/Linux)
elf-version-0.gPTdpQ.so : ELF 64-bit LSB (GNU/Linux), file version 0
elf-version-2.jlIUUg.so : ELF 64-bit LSB (GNU/Linux), file version 2
executable.LlXiFp.so : ELF 64-bit LSB (GNU/Linux), version 1, executable, x86-64
relocatable.UsOYuy.so : ELF 64-bit LSB (GNU/Linux), version 1, relocatable, x86-64
core-file.hqvNRz.so : ELF 64-bit LSB (GNU/Linux), version 1, core dump, x86-64
invalid-type.CIJgfS.so : ELF 64-bit LSB (GNU/Linux), version 1, unknown type 259, x86-64
wrong-arch.UcNmgz.so : ELF 64-bit LSB (GNU/Linux), version 1, shared library or PIC executable, AArch64
file-version-0.lZYuda.so : ELF 64-bit LSB (GNU/Linux), version 0, shared library or PIC executable, x86-64
file-version-2.ucfdwL.so : ELF 64-bit LSB (GNU/Linux), version 2, shared library or PIC executable, x86-64
no-sections.rSjsHh.so : ELF 64-bit LSB (GNU/Linux), version 1, shared library or PIC executable, x86-64
no-sections.rSjsHh.so : contains 0 sections of 64 bytes at offset 0 ; section header string table (shstrtab) is entry 0
no-sections.rSjsHh.so : no section table present, not able to find Qt metadata
qtmetadata-executable.vrxcIf.so : ELF 64-bit LSB (GNU/Linux), version 1, shared library or PIC executable, x86-64
qtmetadata-executable.vrxcIf.so : contains 42 sections of 64 bytes at offset 997256 ; section header string table (shstrtab) is entry 41
qtmetadata-executable.vrxcIf.so : shstrtab section is located at offset 996831 size 423
qtmetadata-executable.vrxcIf.so : section 0 name "" type NULL flags X offset 0x0 size 0x0
qtmetadata-executable.vrxcIf.so : section 1 name ".note.gnu.property" type NOTE flags AX offset 0x2a8 size 0x30
qtmetadata-executable.vrxcIf.so : section 2 name ".note.gnu.build-id" type NOTE flags AX offset 0x2d8 size 0x24
qtmetadata-executable.vrxcIf.so : section 3 name ".hash" type HASH flags AX offset 0x300 size 0x44c
qtmetadata-executable.vrxcIf.so : section 4 name ".gnu.hash" type 0x6ffffff6 flags AX offset 0x750 size 0x3b8
qtmetadata-executable.vrxcIf.so : section 5 name ".dynsym" type DYNSYM flags AX offset 0xb08 size 0xd50
qtmetadata-executable.vrxcIf.so : section 6 name ".dynstr" type STRTAB flags AX offset 0x1858 size 0x15d8
qtmetadata-executable.vrxcIf.so : section 7 name ".gnu.version" type 0x6fffffff flags AX offset 0x2e30 size 0x11c
qtmetadata-executable.vrxcIf.so : section 8 name ".gnu.version_r" type 0x6ffffffe flags AX offset 0x2f50 size 0xb0
qtmetadata-executable.vrxcIf.so : section 9 name ".rela.dyn" type RELA flags AX offset 0x3000 size 0x480
qtmetadata-executable.vrxcIf.so : section 10 name ".rela.plt" type RELA flags AX offset 0x3480 size 0x7e0
qtmetadata-executable.vrxcIf.so : section 11 name ".init" type PROGBITS flags AX offset 0x4000 size 0x1b
qtmetadata-executable.vrxcIf.so : section 12 name ".plt" type PROGBITS flags AX offset 0x4020 size 0x550
qtmetadata-executable.vrxcIf.so : section 13 name ".plt.got" type PROGBITS flags AX offset 0x4570 size 0x8
qtmetadata-executable.vrxcIf.so : section 14 name ".text" type PROGBITS flags AX offset 0x4580 size 0x110e
qtmetadata-executable.vrxcIf.so : section 15 name ".fini" type PROGBITS flags AX offset 0x5690 size 0xd
qtmetadata-executable.vrxcIf.so : section 16 name ".rodata" type PROGBITS flags AX offset 0x6000 size 0x473
qtmetadata-executable.vrxcIf.so : section 17 name ".qtversion" type PROGBITS flags AX offset 0x6478 size 0x10
qtmetadata-executable.vrxcIf.so : section 18 name ".qtmetadata" type PROGBITS flags AX offset 0x64a0 size 0x19b
qtmetadata-executable.vrxcIf.so : found .qtmetadata section
qtmetadata-writable.stzwrk.so : ELF 64-bit LSB (GNU/Linux), version 1, shared library or PIC executable, x86-64
Change-Id: I42eb903a916645db9900fffd16a4437af9728eea
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
clang warns that: local variable 'big' will be copied despite being
returned by name [-Wreturn-std-move]
So force the intended move using std::move.
Change-Id: If5ff557c1b577789e6659783d8106295fafb3485
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Add startOnReservedThread that specifically releases a reserved thread
and uses it atomically for a given task. This can make a positive
number of reserved threads work.
Change-Id: I4bd1dced24bb46fcb365f12cbc9c7905dc66cdf1
Reviewed-by: David Faure <david.faure@kdab.com>
Given on most CI configurations we run tests only on debug builds, this
means that effectively we don't test JIT paths (JIT is kept disabled in
debug builds). To keep it enabled in a test, we have a few options:
* export a developer-build-only variable from QtCore, to force JIT
usage, and set it in the test. This is still suboptimal as many
configurations aren't using developer builds in the first place;
* use the already existing QT_REGEXP_USE_JIT environment variable,
setting it from CMake/CTest. The problem here is that although add_test
does support it, we don't expose it through our wrapper functions;
* just set that env variable from within the test itself. I went for
this option.
Change-Id: I73abfb7fc0d76ec77e881f24c5daf5be304ab948
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
After calling close(), the socket can enter 'Closing' state, in which
we try to write buffered data before disconnecting. As the device is
already closed, we must disable any pipe reader activity and clear the
read buffer.
Change-Id: I8994df32bf324325d54dd36cbe1a1ee3f08022d1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
- getgrgid/getpwuid are not supported
- the default constructor of "ObserverOrUninit" must be referenced for GHS compiler
Task-number: QTBUG-96176
Pick-to: 6.2
Change-Id: I24093da76e116aba4b87a8f5c5763b03d082a2cd
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
- Those files were moved as part of Qt3D as its the sole
user of these
- Also removed associated unit tests
Pick-to: 6.2 5.15
Change-Id: I302bc219218a58071c86d2447cb4449601fca32c
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mike Krus <mike.krus@kdab.com>
Both functions took a QString for the input file name, but while the ELF
parser had an optional QLibrary pointer (which was never null) where to
store the error string, the Mach-O parser received a pointer to a
QString. So make both of them take a single in/out QString pointer,
which has the file name on input and is cheap for us because of COW.
Drive-by fix the name of the static function in qmachparser.cpp from
"ns" (which stood for "not suitable") to "notfound".
Change-Id: I3eb1bd30e0124f89a052fffd16a8182f4f8541c3
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
When we created the functionality, the levels were not yet standardized.
Now they are and you can use -march=x86-64-v3 (for example) to get to
them. We're making a split between "v1" and "baseline" here for the
benefit of 32-bit, which is not included in the ISA levels.
Change-Id: I2de1b4dfacd443148279fffd16a397a700b9a15a
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This will allow us to make changes in QtCore itself, without having to
worry about moc compatibility.
The output uses an #ifdef so this version of moc can still be used to
compile earlier versions of Qt (usually, in cross-compilation
environments). See discussion in the mailing list[1].
[1] https://lists.qt-project.org/pipermail/development/2021-September/041732.html
Change-Id: I2de1b4dfacd443148279fffd16a39784c80c5f3b
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This patch removes most of the checks that are made using C++20
__cpp_* macros for features available in C++17 and earlier.
Library feature check macros (__cpp_lib_*) are unaffected.
Change-Id: I557b2bd0d4ff09b13837555e9880eb28e0355f64
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
