This mostly reverts change 76e8e8e9c8.
The reason is that storing non relocatable types inline in
QVariants storage would implicitly make QVariant non relocatable.
Fixes: QTBUG-87686
Change-Id: I2a09b1dcdd907d60085dccf17f987086dcba878c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Keep this in sync with the changes we have done in QTypeInfo.
Change-Id: Iaacb0f3cc5c46d3486084a1f6eca480a233d5e1a
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
This saves duplicating them with its own flags.
Task-number: QTBUG-85700
Change-Id: I9e938322fd787282cfd9f941f83af8c0d76aaa9d
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
This way we can actually modify the container. Previously the interface
was rather useless.
Change-Id: I278aae46999862ada115c9066a010d7de5cde4ff
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
The high-level iterable interfaces should coerce the types of most
QVariants passed to the expected ones. To do this, move the type
coercion code into qvariant.{h|cpp} so that it is available to the
QVariantRef specializations.
The exception are variants passed to the find() functions of associative
iterables. Here, we should not coerce values we cannot convert to the
default-constructed keys. Instead we return end() in such cases.
Fixes: QTBUG-87687
Change-Id: I0bd4e5c4e4e270dd3bf36cb3fb115794828077f2
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
This simplifies code that would otherwise need to use the setter and
getter in addition to the bindable.
Change-Id: Iec6510b4f578f5b223c63b3a0719257a0cf2463d
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Use a simpler constexpr to generate type name on gcc This
works around an ICE on gcc in release mode when compiling
with PCH enabled. As the type we're getting from Q_FUNC_INFO is
already in a somewhat normalized form, this requires significanlty
less processing and esp. not a recursive constexpr method which
I suspect triggers the ICE.
Fix integer type conversions to also properly normalize long long
values (to q(u)longlong. Make sure the mapping also works on
MSVC, where long long types get mapped to __int64. Also, normalize
unsigned short and unsigned char to ushort and uchar, respectively, to
follow the convention set by uint and ulong.
Add some test cases to verify the mappings.
Change-Id: I3dec5764450bf22ab6f066597803c3f46c2cd5ac
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
As propertyobservers can execute arbitrarily complex code, they can also
modify the obsever list in multiple ways. To protect against list
corruption resulting from this, we introduce a protection scheme which
makes the list resilient against modification.
A detailed description of the scheme can be found as a comment in
QPropertyObserverPointer::notify.
Task-number: QTBUG-87153
Change-Id: I9bb49e457165ddc1e4c8bbdf3d3c9fbf5ff27e94
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Currently
A a;
QVariant::fromValue(&a).value<const A*>() == nullptr;
Still casting non const to const is safe, and worked in Qt5.
After this change
A a;
QVariant::fromValue(&a).value<const A*>() == &a;
Change-Id: I257049d084c712b00a338a2943d379aa478e0981
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
This time based on grepping to also include documentation, tests and
examples previously missed by the automatic tool.
Change-Id: Ied1703f4bcc470fbc275f759ed5b7c588a5c4e9f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
ChangeHandler's evaluated the binding to detect if the value actually
changed. This is a valid strategy for lazy bindings, but eager bindings
were already evaluated at that point, and thus the change would not be
detected.
Change the binding loop test, so that there isn't a fixpoint in the
binding loop, and we can still detect it. Changing the binding loop
detection code to deal with this case is left as an exercise for the
future.
Change-Id: Ia5d9ce2cd98a5780e69c993b5824024eb186c154
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
The documentation of convert promised that “If the cast cannot be
done, the variant is still changed to the requested type”. This was not
the case so far, because we returned too early if canConvert returned
false.
This commit changes the behavior of the method to reflect its
documentation. The documented behavior seems more useful than the
alternative of not changing the metaType, at least for common use cases
inside qtdeclarative.
Change-Id: I09b5a5efb7344e76e93de278e35c7fb2b2f87dcd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The semantics are not very intuitive, and it opens a can of worms
with regards to what should happen with observers that observe
that property.
Change-Id: I6fb00b7693904b968224cc87d098bbd0ea776ba3
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
In the internal hash map implementation, we have to ensure that the
index is in the interval [0, size - 1].
Moreover, in setBinding we have to refetch the binding storage in case a
reallocation happened.
Change-Id: I11c6264f16537699c8908b647e2355a39ce87648
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Before we had the option of eager evaluation, we were able to use the
dirty flag to detect whether we are recursing. However, eager properties
will lead to a evaluateIfDirtyAndReturnTrueIfValueChanged call, and that
in turn will clear the dirty flag.
Introduce a new member to detect that situation, and set the bindings
error state to BindingLoop if we detect that kind of loop.
Change-Id: If40b93221848bd9e9422502318d992fad95b0b74
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Modify special case locations to use the new API as well.
Clean up some stale .prev files that are not needed anymore.
Clean up some project files that are not used anymore.
Task-number: QTBUG-86815
Change-Id: I9947da921f98686023c6bb053dfcc101851276b5
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Clean up the state of the projects,
before changing the internal CMake API function names.
Task-number: QTBUG-86815
Change-Id: I90f1b21b8ae4439a4a293872c3bb728dab44a50d
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
MSVC has strange problems with it and we don't actually need it.
Change-Id: I2c443946d52d475208800f310b5f910da165c99b
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Do not use QVariant::Type anymore, instead use QMetaType
For some reason, this pushed the qvariant autotest over the limit where
MSVC requires the /bigobj flag, so add that one.
[ChangeLog][QtCore][QMimeData] The signature of the virtual retrieveData()
function has changed and now takes a QMetaType instead of a QVariant::Type.
Change-Id: Ib46773bd731ee2177b1ef74d8162d744be7017ef
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Resolve remaining Qt6 TODO
[ChangeLog][QtCore][QAbstractEventDispatcher] The signature of the abstract virtual registerTime function now takes a qint64 value for the interval parameter.
Change-Id: I10166ad5cfb455edc404d465a3731ff094a8977e
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
In order to modify a container through an iterable, we need the original
container to be mutable. The iterable, then, is not a conversion of the
container, but rather a view on the container. The concept may be
extended to other types.
In order to facilitate this, provide a set of methods in QMetaType and
QVariant similar to the convert family. The new methods are non-const
and expect the original value to stay available during the life time of
the view.
Change-Id: I363621033f7fc600edcea2acb786820ccba49c86
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
And add mutable iterators. This requires some refactoring of the
existing iterators.
Task-number: QTBUG-81716
Change-Id: I61b3a3e8c0df5fd449679257a29d9f0c3d19c4f0
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Use QVERIFY in test functions, and (void)tr.load outside.
Change-Id: I18d2eb3aeaf00f9f2bbe75d0a2d8b12569b541e1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
When QCoreApplication object is instantiated, creation of the internal
message window is delayed until QEventDispatcherWin32::processEvents()
is called or socket/event notifier is registered. But, if the user uses
a native event loop, posted events are not delivered and timers do not
work.
This problem was fixed in a4ac4b3263 for
QWindowsGuiEventDispatcher in the same way. So, the risk of regression
is minimal.
Change-Id: I7bbb721d96046f64d21a7b0e553e46798b37189c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Instead of using imprecise QTest::qSleep() to estimate the
elapsed time, we trigger a single shot PreciseTimer and
gather all the data in lambda. We wait for lambda to be
executed - we give it twice as much time as is in theory
needed. Afterwards we verify all the data collected in lambda.
Task-number: QTBUG-82903
Change-Id: I0147b7cd2aaf4bf58a216caff167d2db8712541a
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Some CMake files currently assume that QtGui is always enabled and we
get a configure-time failure without these changes.
Task-number: QTBUG-86053
Change-Id: I28e32c180c32221f32519017bac6b518a19d5983
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
This requires refactoring of QMetaSequence, as they share a lot of
common functionality. QMetaAssociation provides a low level interface to
an associative container.
Task-number: QTBUG-81716
Change-Id: I273e00abd82f1549ba8803c323d82aa3a2d12ded
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We were starting to run out of space for builtin core types.
Remap the type id's to create lots of additional space.
We now reserve the first 64k id's for Qt, and have 16k id's for
Qt Core. That should hopfully be enough for a while ;-)
Fixes: QTBUG-85914
Change-Id: I0dab6bf23652e46a9557d9b38af7990b68c572b6
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
They were disabled in ad0e3e26fa,
but that was probably accidental.
Change-Id: Ia9cbccfbeecfe84768c3465f5699ed44b7f932a5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Provide functionality to add and remove values, so that you can use a
sequential iterable as stack or queue if the underlying container
supports this. To this end, provide a way to specify whether the
value should be added or removed at the beginning or the end of the
iterable.
Change-Id: If63d302f3ca085e56d601116ce4dfaa6b94a0c4f
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
For completeness' sake we should expose this. The iterators provided by
QIterable and friends will check the category at runtime, and should give
sensible feedback.
Change-Id: I778894f340c862f79a18c6c5607bcbba98dd7598
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This is so that they are in line with the "value_type" usually found in
containers. Associative containers have "key_type" and "mapped_type" and
we will use those names for access to elements in QMetaAssociation.
Using "value" as name for sequential containers improves consistency.
Change-Id: I628b7e1446bb2d56843b843bca72d279a6b247e6
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Remove around 1000 compiler warnings about missing overrides
in our auto tests.
This significantly reduce the compiler warning noise in our auto
tests, so that one can actually better see the real problems
inbetween.
Change-Id: Id0c04dba43fcaf55d8cd2b5c6697358857c31bf9
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Looks this is redundant in fact and unneeded. The check can never be
evaluated to true, since if so, it would mean it had failed in the
previous iteration, in which we already handled the exit from the loop.
Fixed also some comments.
Task-number: QTBUG-83419
Change-Id: I4fe56bfac39cd58b1166967f3ccb80cdff882748
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Before, we used not so accurate QTest::qWait(50)
to measure the accuracy of more precise timer's interval.
In addition, the checked range for remainingTime (50, 200)
was probably wrong, since by definition it couldn't be more than 150,
as we started the timer with interval of 200 and waited at least 50.
In this fix we have additional "tester" timer to measure remainingTime
of "tested" timer. The "tester" is a singleShot timer with interval of
50, and is started together with "tested" timer. Whenever the "tested"
timer timeouts, it restarts the "tester" timer - this is done desired
number of times (2 by default, like in the original test).
The test itself lies now inside tester's lambda. We fix the tested
range (at least 1, no more than 150). The minimum value could in
theory be greater, but it's enough to test that it's not overdue.
Finally, we wait for expected number of test runs. We give it twice
as much time as is in theory needed.
Task-number: QTBUG-83419
Task-number: QTBUG-58519
Change-Id: I43836d787d804f22bb66515ebb215d040189c4f3
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Instead of QCoreApplication::quit() directly calling exit(0), which would
leave QGuiApplication and client code out of the loop, we now send the
Quit event, and let it pass through event delivery, before finally ending
up in QCoreApplication::event(), where we call exit(0).
This has the advantage that QGuiApplication can ensure all windows are
closed before quitting, and if any of those windows ignore the close
event the quit will be aborted. This aligns the behavior of synthetic
quits via QCoreApplication::quit() with spontaneous quits from the
platform via QGuiApplicationPrivate::processApplicationTermination.
Clients who wish to exit the application without any event delivery or
potential user interaction can call the lower level exit() function
directly.
[ChangeLog][QtGui] Application termination via qApp->quit() will now
deliver Quit events to the application, which in turn will result in
application windows being closed as part of the application quit,
with an option to cancel the application quit by ignoring the close
event. Clients who explicitly want to exit the application without
any user interaction should call QCoreApplication::exit() explicitly.
Task-number: QTBUG-45262
Task-number: QTBUG-33235
Task-number: QTBUG-72013
Task-number: QTBUG-59782
Change-Id: Id4b3907e329b9ecfd936fe9a5f8a70cb66b76bb7
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
So far QPropertyAlias was limited to working with QProperty<T>.
Change the implementation, so it can be constructed from any
property or even a QBindable<T>.
Change-Id: I175cffe94a9ef332367d39faa976eb065b0e6ffe
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Add a new BINDABLE declaration to the Q_PROPERTY() macro that tells moc
where to find the QBindable for the property.
Add a QUntypedBindable base class to QBindable<T> that gives access to
generic functionality and checks argument compatibility at runtime.
QBindable<T> will still do static checking at compile time.
Add QMetaProperty::isBindable() and QMetaProperty::bindable()
to be able to dynamically access the binding functionality.
Change-Id: Ic7b08ae2cde83fd43e627d813a886e1de01fa3dc
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Add a compatibility property class that makes porting to the new
property system as simple as possible.
Binding evaluation for those compat properties is eager, as we
do not control possible side effects of the code in the existing
setters.
Change-Id: Ic56347abb49e40631ec73e88c6d40d4bdb05ca29
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Add a QObjectComputedProperty. This class doesn't store the data
itself, instead relies on a getter method to compute it's value.
As the property is read-only, one can not bind to it, but it can
be used in other property bindings.
Change-Id: I0f6bffdd9f80f1d0829826f93a47257f2b3127af
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Add Q_OBJECT_BINDABLE_PROPERTY() macro that can be used to define
a bindable property inside QObject.
The macro and the class behind it creates storage for a property
that is bindable inside a QObject or QObjectPrivate. The property
only uses as much space as the data contained, ie. it has no
storage overhead, as long as no bindings are being used.
Bindings are being stored and looked up in the QBindingStorage
associated with the owning object.
Change-Id: I1dadd7bddbad6fbf10cfa791d6461574b9db82dd
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Add a private QBindableInterface and a public QBindable<T>
class, that will be the API interface for accessing bindings
for properties in QObject.
The QBindable class gives access to all aspects of
the property related to bindings. This includes setting
and retrieving bindings, installing observers and creating
a direct binding on this property.
Change-Id: Iaead54d2bd6947bd2cda5052142b2a47dd8bf7c4
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
These look rather weird, an explicit property.setBinding() call
is simply better in this case, and also more aligned with the API
we can offer in QObject.
Change-Id: Ifb00fd47a75e6b3bc94e34bf49e4f13249565bfe
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
And all related functionality. This is being replaced by
Q_BINDABLE_PROPERTY and Q_OBJECT_BINDABLE_PROPERTY in the
next few commits. The new infrastructure coming will play
nicer along with the existing property system.
Commented out some autotests, that will get reimplemented
with the updated infrastructure.
Change-Id: I50c30bd4d5c6c6b6471f8eb93870e27d86f5a009
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
Rename QPropertyBase to QPropertyBindingData, as it contains the
data related to bindings. The new name fits better, as the data
can now also live somewhere else than the data strored in the
property.
Change-Id: I489efb86ad2e0bad2740c9d1aa74506fe103d343
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>