This operation should be a no-op anyway, since at this point in time,
the fromAscii and toAscii functions simply call their fromLatin1 and
toLatin1 counterparts.
Task-number: QTBUG-21872
Change-Id: Ie8ac500f2f8ebe99b7525feaa7b39247e641a461
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The mentioned records for råkat.se cannot be resolved.
Note these were marked with a FIXME in the first place.
Change-Id: I4ea3bbb0aec8ca1b3487c44656b48a8715228886
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
I wrote nonsense in that commit. The older methods that take a timeout
all take milliseconds, and the comments in the unit test really meant
milliseconds, not seconds. 1s is not shorter than 100ms....
Change-Id: Ic18899bb0462d89575dc5a9a311478adc4dea1cb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is much more performant than calling QObject::receivers(const char*)
Can be used instead of connectNotify in some cases.
Change-Id: I19e0933f678f171f515d9a0f69f0ad4fb7d894b4
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
qVariantValue and qVariantCanConvert are Compatibility members, while in
Qt4.8 they are marked as Qt 3 Support Members.
qVariantFromValue and qVariantSetValue are Obsolete members.
Change-Id: Ie8505cad1e0950e40c6f6710fde9f6fb2ac670fd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reimplementations of connectNotify() and disconnectNotify() can
assume that the signal argument is in normalized form, but after the
introduction of the Qt5 meta-object format, it could happen that it's
not.
The problem is that the internal QArgumentType class, which attempts
to resolve a typename to a type id, was calling QMetaType::type().
QMetaType::type() falls back to trying the normalized form of the
typename if the original argument can't be resolved as a type (this
behavior isn't documented, but that's how it works). This means that
e.g. QMetaType::type("const QString &") returns QMetaType::QString.
Since QMetaObjectPrivate::indexOfMethodRelative() (more specifically,
the methodMatch() helper function) prefers to compare type ids
over typenames (since the type ids are stored directly in the meta-
object data for built-in types), the method lookup would *succeed*
for signatures with non-normalized built-in typenames as parameters.
QObject::connect() would then think that it did not have to
normalize the signature (see "// check for normalized signatures").
The consequence was that the original, non-normalized form got
passed to connectNotify().
This commit introduces an internal typename-to-type function that
is the same as QMetaType::type(), except it doesn't try to normalize
the name. This way, the only place where normalization can occur in
the signature-to-meta-method processing is through the calls to
QMetaObject::normalizedSignature() in QObject::connect() itself.
The implication is that there are now cases where the method
signature will be decoded and processed twice, where processing it
once was sufficient before. On the other hand, it is consistent with
the pre-Qt5-meta-object behavior, where we predict that the
signature is already normalized, and only perform (comparatively
costly) normalization if the initial lookup fails.
Change-Id: Ie6b60f60b0f9a57ebd378d980329dac62d57bbd9
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
static_metacall was never set on the metaobject written by
QMetaObjectBuilder::fromRelocatableData, sometimes causing a crash. It
should be initialized to 0.
Change-Id: I79373d895e131f0cc2ff1af6d2177a0c1a282be7
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The Qt buildsystem is creating the config files for it even
when it is not building QtDBus, so Qt5DBus_FOUND = True.
Re-enable the CI testing on mac with this change.
Task-number: QTBUG-25522
Change-Id: I5d2690d17fde6c5aabcbdd3e2eef9f0846edd97d
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This autotest fails to build after the introduction of the
QMetaMethod-based connect/disconnectNotify() functions; we are
intentionally keeping the old const char * versions (overloads) for
a limited time, to avoid disrupting other modules.
This commit will be reverted as soon as the compatibility overloads
have been removed.
Change-Id: I9b5a40b51ffa3bfa3d185410389678c262ca7b45
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This API will fully replace the const char *-based connectNotify()
and disconnectNotify() in Qt5; the old functions will be REMOVED
before Qt 5.0 final.
The new implementation fixes the long-standing issue of
connectNotify() not being called when using the (internal)
index-based QMetaObject::connect() (e.g., from QML).
As with the old API, there are still two "unintuitive" behaviors
concerning disconnectNotify():
- disconnectNotify() is not called when the signal is disconnected
using the QObject::disconnect(QMetaObject::Connection) overload.
- disconnectNotify() is not called when a receiver is destroyed
(i.e., when a connection is implicitly removed).
The old versions of connectNotify() and disconnectNotify() are kept
for now, and they are still called. They will be removed once known
existing reimplementations (e.g., QtNetwork, QtDBus) have been
ported to the new API.
Change-Id: I8b4f007f3c6d89199c1ba04a3e23c8ca314e0896
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
The test is passing in CI for both Mac and Windows, so removed the
insignification from it.
Task-number: QTBUG-24885
Change-Id: Ida39d98b72e49fc82358d016b8de725bbfc5d6de
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
This test has been passing consistently since the previous crash was
skipped in commit 6dbd00b120.
Task-number: QTBUG-22792
Change-Id: I41ac001a3b9e16cde4d674dc9f34ab2dffb848cd
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This test has been passing consistently since it started running in CI.
Task-number: QTBUG-24295
Change-Id: If2a163607ae72cae9e28619dd5de1b333aea4ed9
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
These tests have been passing consistently since they started running
on Windows in CI.
Change-Id: I4505497afc477a7f4fbda0acc29987d0d0cf220a
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
This test has been passing consistently since starting to run in CI.
Task-number: QTBUG-25445
Change-Id: Id024921b18ea4ef94ad2f47d9db2ccda3212eaaa
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
The test has a single stable failure on both of these platforms. Mark
the failure with QEXPECT_FAIL (that was already the case on Ubuntu
11.10) and re-enable the test.
Note also the elimination of duplicate bug numbers.
Task-number: QTBUG-24234
Change-Id: Ica11e7d1f3cd9487647127984fef7c75e0e764fe
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Change-Id: Ifdd89397f88b090a6b43d40636dbeac029faaed8
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Change-Id: I58efa1f295dbc652b1882937ca27ea52d9f4a923
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Turns out that we've had some old unit tests commented out that did not
compile. QString does not have a std::string constructor nor overloads
to many other methods. And std::string does not cast to char* on its
own. So these tests need to be removed.
Change-Id: I22df66fc3ccc68bc2840f2d83747234418e480f5
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
And use QString::toUtf8() to recover the byte array original.
Change-Id: Ic94de12e7ac67479e85a64a86f8467428b4d22ba
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Remove all non-UTF-8 sequences from source code in Qt.
Change-Id: I46d9cb23ef2199894896f171d553b3144822f36c
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The test was flawed, as it didn't process queued events before checking
for received event counts, which caused window minimum size enforcement
triggered resizes to be missed. Added event processing steps before
critical checks and also increased the size of the windows so that
event counts are predictable also on Windows.
Note that this might also fix the issues this test has on Mac, but I
can't test that.
Task-number: QTBUG-24904
Change-Id: I01a4bd1ddabcf3650a8abff67b03c75b9c40a626
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Given a member function that's a signal, returns the corresponding
QMetaMethod. Inspired by the implementation of the template-based
QObject::connect().
The primary use case for this function is to have an effective and
exact (not subject to shadowing) way of checking whether a known
signal was connected to in reimplementations of
QObject::connectNotify(QMetaMethod), avoiding string comparisons.
Example:
void MyObject::connectNotify(const QMetaMethod &signal)
{
if (signal == QMetaMethod::fromSignal(&MyObject::mySignal)) {
// Someone connected to mySignal ...
}
}
Change-Id: I5e4de434275fe543c004d569dcaa9ceda3442f03
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Instead of allocating and reading the entire image and then scaling it
down, this code reads only one line at a time and scales it on the
fly.
Change-Id: I61fde307146c11dcd90ca617cc2e7f85dd3b66c4
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This autotest passes when run alone, but sometimes fails when run
concurrently with other tests.
Change-Id: I327de7f4a9f8af385351e4c6b09a57311efd6eb6
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
QFontDialog and QColorDialog were ignoring the DontUseNativeDialog. This
lead to a native (Cocoa) dialog created all the time.
Fix the testcase for QFontDialog. It needs the DontUseNativeDialog flag
set.
Task-number: QTBUG-24321
Change-Id: I159c1ad057bac38226f1e01a56b15f142650bfd8
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
cmake was installed on CI macs _after_ this test was added, causing the
test to block unrelated changes. Temporarily disable it as previously
agreed with Stephen Kelly.
Change-Id: I079c0016a5e4a9a03ee1a0bae9a2e836c6b985d6
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
It no longer requires hardcoded configuration, and it passes on
linux, mac 10.6 and windows desktops
Change-Id: Ibaa63520dade58ce13c23cf2aba3ddbc5be1c472
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Also remove some code which has been unused since it was introduced in
32182d107fa75e5619ecc91a81f50626f429ebe1
Task-number: QTBUG-25140
Change-Id: Ic7053d68d8200f845c1ae330342d27af7275e057
Reviewed-by: Tarja Sundqvist <tarja.sundqvist@digia.com>
Reviewed-by: David Faure <faure@kde.org>
Known failures in this test are now handled by QEXPECT_FAIL.
Task-number: QTBUG-24796
Change-Id: I12ba57370cf3df1a85a108fbbcdc9db2222491c1
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Unlike path(), toLocalFile() isn't reporting a URL component, so it
should decode the percent-encoded characters fully. This extra
decoding pass is meant to catch %00 to %1F, %7F and %25 (the percent
sign itself).
It also catches %80 to %FF, which aren't decoded because they don't
form UTF-8 sequences. That means QUrl::toLocalFile() has undefined
behaviour if the path contained non-UTF8 sequences.
Task-number: QTBUG-25459
Change-Id: Iab5a0ba6afcfc4510e297984f2ffc208cedd752b
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Can't use style name with Windows native font engine, so do the
comparison using style in case multipleRawFontsFromData().
Also XFAILed the advances() case when using Freetype font engine in
Windows, as some of the advances returned are one pixel wider than
expected.
Task-number: QTBUG-24197
Change-Id: Ib5fecd83a93908e57a4c82ffb5495a92474ce45a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
QMetaObjectExtraData was added when support for QMetaObject::newInstance
was added. One needed a place to put the pointer to static_metacall in
the QMetaObject.
But as we break binary compatibility, one can change the size of
QMetaObject, and put everything back inside QMetaObject's own structure.
Meaning it is not required anymore to have one QMetaObjectExtraData
instance per QMetaObject anymore.
Change-Id: If0b8f586cbaf633eed10045adee3ba3366826c86
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
This is done in preparation of introducing the
QObject::connectNotify(QMetaMethod) function. Together with the
forthcoming QMetaMethod::fromSignal() function, which returns the
QMetaMethod corresponding to a Qt/C++ signal (member function), the
comparison operators provide an effective way of checking which
signal was connected to.
Change-Id: I2de48628c4884a7174fb8574895f272cb3fe5634
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
This test hangs in CI, but so far I've been unable to reproduce the
problem. Disable the test for now so that this test does not block
changes that bring in needed functionality.
Task-number: QTBUG-25496
Change-Id: I81faa574b6d7bcab2e32becc2af0f71006c7dd9c
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Instead of trying to return whether the URL is relative to something
undefined, let's instead follow what the documentation was saying all
along and what the RFC says about "Relative References".
Change-Id: I32722321a6b36c6e3480669ad769390e4c6f7d1c
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Previously, the CI system has not been testing on Windows with the
-developer-build configure flag. Mark known failures for this
configuration so that tests can be run in enforcing mode.
Change-Id: I5fbbbe09a7b400d626107c66dcbd5c5469a45b20
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
QLatin1Literal is just a typedef of QLatin1String.
Change-Id: If20ca225e57a7fb45a7775f0fc81aedb6da88c96
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
QUrl::path() already decodes almost everything, but let's pass the
formatting flag to be sure.
Note: decoding of control characters from U+0001 to U+001F is not
implemented. Non-UTF8 sequences are also not representable.
Change-Id: I9a0ae2282ec3d48cc0e70e5b2d3824fb120709ed
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
QRegExp matching methods modify the object, which we don't want to. In
particular, when we receive a QRegExp from the user or we store in a
context that might require thread-safety, make sure we make a copy
before using it.
QRegularExpression has no such shortcoming.
Task-number: QTBUG-25064
Change-Id: If119e06221ca99e57c5ad1a1d4cc6468e9f68c7b
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
It's perfectly valid to have a path of /c:/a.txt on Unix, so don't
strip the leading slash unless we're on Windows.
Task-number: QTBUG-20322
Change-Id: I721bd0a65b41048bc735d4eaa0d536174164fe64
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Since this test began to run again on Mac, it has been passing
consistently.
Task-number: QTBUG-22748
Change-Id: Ia81cf60b11d45fb331b5eca5d13df00556c18e07
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
