QLockFile "noPermissions" test is not applicable with root
privileges.
Change-Id: I5779da524f24d0f1b9ef519d654856a6200da6bf
Reviewed-by: David Faure <david.faure@kdab.com>
Some of the QSaveFile tests are not applicable with root privileges.
Change-Id: I1a22906c0b14acf144f1849719152dfe9d79f426
Reviewed-by: David Faure <david.faure@kdab.com>
Recreating QCoreApplication could cause a crash in QNetworkAccessManager
constructor. That was caused by an invalid shutdown detection introduced
in f273d6fbc0.
Task-number: QTBUG-36897
Change-Id: Ib5bba773a2a4fcde690a3a93680aef551aae3a5b
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
GRAPHICS_ROOT and TZ environment variables are needed in child
processes in order to successfully run the auto test selftests.
Change-Id: I7befabd535b4c47b1e75acbe3d6158d0d9b811b3
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Prevent crash on platforms that don't support accessibility by skipping
tests.
Change-Id: I42ba44df3200e0abd62797c76a5c538fb1d2757c
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
When passing invalid data to QRawFont, we need to fail gracefully
and mark the font as invalid, instead of crashing. This crashed
because of different missing sanity checks in the Windows
and FontConfig font databases.
[ChangeLog][Text] Fixed crash when trying to load a font from
invalid data.
Task-number: QTBUG-37190
Change-Id: I62c81217ec7d873350b575c9d4ae8e6f0a939540
Reviewed-by: Michael Bruning <michael.bruning@digia.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
When a UTF-8 sequences is too short, QUtf8Functions::fromUtf8 returns
EndOfString. If the decoder is stateful, we must save the state and then
restart it when more data is supplied.
The new stateful decoder (8dd47e34b9)
mishandled the Error case by advancing the src pointer by a negative
number, thus causing a buffer overflow (the issue of the task).
And it also did not handle the len == 0 case properly, though neither
did the older decoder.
Task-number: QTBUG-38939
Change-Id: Ie03d7c55a04e51ee838ccdb3a01e5b989d8e67aa
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
It may return null during program exit, due to QCoreGlobalData global
static already having been destroyed. If that's the case, QTextStream
needs to fall back to Latin 1, like QString::toLocal8Bit and
fromLocal8Bit already do.
Task-number: QTBUG-38316
Change-Id: I5949c8dec15b60f4a13b5d9307ed6abfc799fe20
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
QEXPECT_FAIL followed by QTRY_COMPARE considerably slows down
tests due to the check timing out.
Task-number: QTBUG-38890
Change-Id: I7f90f2627fc6ce149d159a6d13355ca1a8181d54
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
That long call chain is screaming "here, I'm dereferencing dangling
pointers! Valgrind me!" but 2006 Thiago didn't see them...
Change-Id: I44de5aea113d05edec2227e9db6be8cec9303be9
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
The main test won't find them if they are.
Change-Id: Iae3ffe4c0289a0c88d46c1bd2e414c20def89ab4
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
The tests for toString/fromString previously didn't run tests
for timezones with hh:mm where mm != 00.
Change-Id: I74da99c5b6890f46ce06446084a8129b4cbc7a02
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: John Layt <jlayt@kde.org>
Increase the chunk size of the server and remove hard-coded
interval when waiting for the server to listen.
Unmodified, the test takes 170s on Windows.
Change-Id: I65bdc93ff78e1b4fb429fcafd0fdc5e80bb281f9
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Use the correct palette and enforce Fusion style to prevent
the Vista style from clobbering the tooltip palette in polish().
Task-number: QTBUG-38183
Change-Id: Id19d548f818d801c4914a343e08207195c343888
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Determine the visual index by looking up the column of the QModelIndex
in the logicalIndices array instead of looping.
Task-number: QTBUG-37813
Change-Id: I5c3c73c67537877b03cdc2c36a52041d99f7f49d
Reviewed-by: David Faure <david.faure@kdab.com>
Change-Id: I92fa083665509932b75ff1037904a6f78a950fd6
Reviewed-by: Jeremy Lainé <jeremy.laine@m4x.org>
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Change-Id: Ife5b7206fd3d7af57cfca3c0f28f56bb53ede7a7
Reviewed-by: Jeremy Lainé <jeremy.laine@m4x.org>
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Nothing else seems to report this state and on windows
for example it results in NVDA reading subMenu which makes
little sense.
Task-number: QTBUG-38500
Change-Id: I64820d9f2ea9174034f01da42cb2266a19c19465
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
This test doesn't fail on Mac any more.
This reverts commit 36493a7a41.
Task-number: QTBUG-23685
Change-Id: Ib7c56494b07de9839b3287758fe228f799bc343c
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
sched_yield is standardized and on linux pthread_yield is implemented as sched_yield.
Building Qt for Android on OS X doesn't compile with the pthread version.
Change-Id: I1913afa83769805291e987f55b8f452299a43dce
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
On some platforms all windows are by default forced into fullscreen mode when show() is executed.
In QMdiSubWindow we cannot handle the fullscreen state and should ignore it. Otherwise
the window will be forced in "normal" state and ignore any previously
executed geometry changes.
Change-Id: I09ce6507a1eac6a0adb3405ca3f423642d30f801
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Bernd Weimer <bweimer@blackberry.com>
In the justification code, we unconditionally subtracted one
from the line_length, but then compared the result to 0 afterwards,
so we did not support when the line_length is 0 initially, which
can happen if it only consists of spaces (in which case
trailingSpaces will be non-zero and line_length will be zero.)
The fix is to bail out for both strings of length 1 and length 0.
[ChangeLog][Text] Fixed an assert when justifying a QTextLine
which only contains spaces.
Task-number: QTBUG-38520
Change-Id: Ib04993f47eb2f9f7fc49c4a5400f18f9682a72f2
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
The plain text edit's smart repaint logic in
QPlainTextDocumentLayout::documentChanged assumes that during a change inside
just one block, the block is in the state before the edit and a call to
layoutBlock() is going to bring it up-to-date. Then only a comparison of the
bounding rect - before and after - is going to allow for smart repaints.
The assumption of the layout being in the same state as before the edit got
broken by commit cc57a2e90f, which introduced
code to use a QTextCursor within a slot connected to QTextDocument's
contentsChange signal. The usage of the QTextCursor there ends up updating the
layout of the block ahead of time, breaking the assumption and therefore the
optimization, in the sense that during changes in the preedit that cause a
change of height / line count, the old bounding rect in
QPlainTextDocumentLayout::documentChanged and the new bounding rect will be the
same. This causes a repaint of only the edited block, missing repaints of the
following blocks, even though the line count effectively changed.
So what's causing QTextCursor to mess with the layout is the attempt of
updating the vertical movement x property. This patch inhibits the update,
marking it as dirty for initialization later. This means that slots connected
to this low-level signal cannot rely on the cursor's visual x position, but
that doesn't seem useful anyway and isn't required for commit
cc57a2e90f.
Task-number: QTBUG-38536
Change-Id: I5fae12d646a4b2d2cc22b9f2d021e5dc8cfdda94
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Increase window size when verifying that the scrollbar disappears
when using a small font on Windows 8.1
Change-Id: I7d4520bc5882d8ccd59db3f5bff7e9d6d68a4827
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
When stripping the root path from a file name that cannot be found
in the model, use case sensitive comparison depending on
file system.
Task-number: QTBUG-38162
Change-Id: I28e28973fca2da35a5768fdd00cc258b9669a15a
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
VoiceOver expects press to open the combobox.
Task-number: QTBUG-37922
Change-Id: Iee7b7974db097e4e2444202c703bd587e1576fe0
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
When QSqlQuery::at() == QSql::BeforeFirstRow and seek(1, true) (seek to
next record) is called the expected result is go to first row.
When QSqlQuery::at() == QSql::AfterLastRow and seek(-1, true) (seek to
previous record) is called the expected result is go to last row.
But in all cases the first and last are skipped.
Change-Id: I584138b3d397ce1c790bf89688ee92289a99611c
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
... because they are too unstable. We can check whether they are more
stable once the new network tests server is in place.
Task-number: QTBUG-38385
Change-Id: I5ced7cc1f89290812aa88f174a41965fd2ef7252
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Change-Id: I2912dcca77270582f6e989b8b3fb72b82f6f70d6
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
isES() becomes isOpenGLES(). The library type enums are changed
DesktopGL -> LibGL and GLES2 -> LibGLES. This removes the now
unnecessary version number, the confusing "desktop" term and provides
better readability.
The old function/values are kept until the related qtdeclarative
changes are integrated.
Task-number: QTBUG-38564
Change-Id: Ibb0a1209985f1ce4bb9451f9b7b093c2b68a6505
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Introduce QTRY_COMPARE to let the sorting finish instead
of a hard-coded time-out.
Task-number: QTBUG-29403
Change-Id: I813bf6bcfe7110f49a5b95db589ed8a3f559db89
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Use QTRY_COMPARE for dirChangedSpy, remove all unneeded
remove()/setPermission() calls (originating from the time
the test did not use QTemporaryFile), add more QVERIFY()
and messages for the other operations.
Task-number: QTBUG-30943
Change-Id: Ib3b78b1c6922539fd5e9238aa017fcdb554aacc8
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
selectFile(): Ensure dialog is destroyed before the temporary file
to prevent leak.
selectFiles(): Introduce scopes to prevent co-existence of 2
instances of QFileDialog, which causes warnings from file watchers
and occasional crashes in accessibility.
Discovered while investigating:
Task-number: QTBUG-38414
Change-Id: I94d2bb3e05538416286641cb08a88d8b3837a8a6
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
And move the default argument from the deprecated constructor to
the new one
Also make sure that the error number is consistent across the
two constructor
Change-Id: I3721266b39ab493f0add35b2d1f892b2f6094992
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
The SSE2-based conversion only kicks in with strings with 8 characters
or more in length.
Change-Id: Ic1daad0845571be03547553cc001d83550f0c89c
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Commit 125bb81bef wasn't enough. Let's
just make it simpler and use a regular function.
Change-Id: I9627dedaa87873b4b138224afd182e4fd9a55265
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The ability to set a container to be unsharable has very little use and
it costs us an extra conditional for every refcount up and possibly
down.
This change is a no-op for current Qt 5. It shuffles a few things around
just so Qt can compile if you define QT_NO_UNSHARABLE_CONTAINERS. That
is done to ease the fixing of the code in Qt 6 and to make my life
easier: I'll keep that defined in my local Qt build so I can catch any
misuses of this deprecated API.
The newly deprecated methods are not marked QT_DEPRECATED because the
bootstrapped tools wouldn't build -- they're built with QT_NO_DEPRECATED
defined, which causes build errors.
[ChangeLog][QtCore] The setSharable() and isSharable() functions in Qt
containers has been deprecated and will be removed in Qt 6. New
applications should not use this feature, while old applications that
may be using this (undocumented) feature should port away from it.
Discussed-on: http://lists.qt-project.org/pipermail/development/2014-February/015724.html
Change-Id: I789771743dcaed6a43eccd99382f8b3ffa61e479
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
8dd47e34b9 removed the handling of the
BOMs but did not document it. This brings the behavior back and adds a
unit test so we don't break it again.
Discussed-on: http://lists.qt-project.org/pipermail/development/2014-April/016532.html
Change-Id: Ifb7a9a6e5a494622f46b8ab435e1d168b862d952
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
