qmake will now look for .qmake.super, just like it looks for .qmake.cache,
and the cache() function has a mode to write this super cache.
this allows the creation of aggregator projects like, say, qt5.
a notable difference to the normal cache is that this file is *not* added
as a dependency of the Makefile. this means that modifications done by
later sub-projects will not cause a re-processing of earlier projects, and
consequently that one should be cautious regarding what information to
store there.
another notable difference is that this file is read *before* the spec,
so the spec can use the variables from the cache without resorting to
$$fromfile() & co.
Change-Id: I4807b6d34014261fa9eebd6f0ae128b802d86691
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this is the source dir equivalent of .qmake.cache and can be checked
into the repository. it can be used to make project-wide settings, or
just to signal the presence of an mkspecs/ directory.
Change-Id: I5f1cebad2aa2a89e78089341b2051613b6b7a613
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this allows the creation of aggregator projects, like, say, qt5.
this is not expected to have a negative impact, as no project could
reasonably expect a nested .qmake.cache to *not* take effect - in fact,
if the project was processed stand-alone, it would already use it.
Change-Id: I33f2935d309baba7e95465f2fefb8231c4f03eda
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this has the advantage that the %mastercontent assignments in sync.profile
are not necessary any more. as it happens, most modules got them wrong
anyway.
Change-Id: Ibdf689be408f18e1d90c44ef4ecacd7c24b1f1c9
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
instead of writing the same file twice, just forward to the compat
header, like it is done for every other header.
Change-Id: I8c908f80149aff4720cca6d51ab5b550c31f78b1
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
each qt module comes properly declared and located, so there is simply
no point in performing a search.
Change-Id: I86fad21bb8e128b85f1000cc116cc44a23642eb4
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this will allow us to not rely on the modules matching the global
qt_framework setting.
Change-Id: Ic1dce757ff63d06af54a2428e23a1bbcf1c81ba1
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
there won't be terribly many projects relying on it. now's the time to
find out for sure ...
this reverts commit 3279b07302fde0eb14f9b197c9ad2e14d512817e
Change-Id: Id36687ab3bfc7dd5ce35b584621a8f5b3ee00fc9
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this only needs to be set in one module each - the one which provides
the relevant tool.
this is moderately source-incompatible, in that a package which queries
a given variable from the wrong library won't get the path it looks for
any more. as it's likely that everyone was using QtCore as a reference
anyway, this will only affect uic - which is in the new QtWidgets
library, to which people need to adjust anyway.
Change-Id: If05d3c33fda6cd12466e261391b825c59651d3e4
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
that way we can theoretically support modules outside $QTDIR.
also, it's just cleaner.
Change-Id: I6139ebc7328b64ace8552b3e54f9a8c69248ceec
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
don't prepend the paths, as this will only mess up building of
subsequent modules (e.g., building qtdeclarative against an installed
qtbase would pick up the headers from the qtdeclarative previously
installed into the same directory as qtbase).
for frameworks this was a rather pointless exercise in the first place,
as their headers are properly isolated anyway.
however, make sure that we don't add system locations to the search
paths, as this is a) unnecessary and b) messes up subsequent libraries
in non-standard locations which want to shadow versions in standard
locations (pkg-config .pc files which add standard paths are considered
broken as well).
Change-Id: Ie1dc65d4767e98e1df6e49012505141935a6c704
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this fully replaces qtmodule-configtests.
it is way shorter and it actually integrates reasonably with qmake.
Change-Id: I819cc6807ad3661c419b54fa253894936dd88a64
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
it is not really a Qt module, and pretending causes some messups.
Change-Id: Id0980f7c00d6d176dd4937f8b265b8b571aa1277
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
once we auto-generate the pris while building their respective modules,
the versions won't be available during bootstrap yet.
however, as these are core modules, their version is locked to the global
$$QT_VERSION anyway, so just use that.
Change-Id: I092f5e7d4dfe99c03e0df71f9409cac9be9f2297
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
it's module-specific.
on the way, fix it to actually support multiple files.
Change-Id: I796b0e98e38a54754022e0e2fa48cecb54d06ff4
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this doesn't make too much sense as such, but the file will grow.
Change-Id: Iceaecdc24f83b3dafb40c8d2f1b6cddafa2d70a1
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
qmake-generated version headers don't exist yet at the time syncqt runs,
so the forwarding headers would be deleted - just to be re-created a
moment later, thus changing the timestamp for no good reason.
Change-Id: I1b4c2f05f57c2315adf4b8dd726ea413ede1be5b
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the location is determined by syncqt rather precisely. no need to
reverse-engineer config files.
$$HEADERS_PRI doesn't seem used anywhere, so don't set it as a side
effect.
Change-Id: I54a63356c350c0ddae4c880bf374fcd127282429
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the forwarding pri is loaded even if it was still created by syncqt, so a
top-level qmake -r will still catch it even in the future.
Change-Id: I2e4b556cd06eb88be9ee378662a2e6e1bff67ad7
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
there is no point in adding Qt modules to SUBDIRS projects.
as QT contains core and gui by default, the operations are relatively
expensive, so skip them when they are unneeded.
Change-Id: Ibe6447ff452e403cb040fabe245d248edbda0eaa
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the check whether we are building a lib or an app (and thus have a target)
is done by quite some feature files (and generally wrongly, as they do not
account for the new aux target), so centralize it in default_post.prf.
Change-Id: I868edbc4185be8a6c23ecd4a2c126024d73cdeb4
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the declarative module is a fake, so there is no library to install.
Change-Id: I0dcd39f3304e38adce9ea34e2268905525abd3d5
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the qt version is always set.
otoh, we need to allow the module to override the own version.
Change-Id: Ic3eb7dae59a5fb011cede09151553b652a0a1d78
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
don't even complain about trying to use js-based feature files. we have
been doing that for long enough.
Change-Id: Ib58ec204322442c488e8d780989f26b1e32595ed
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
qrc_ files are generally not meant to be included, so there is not much
point in doing this.
qprintsupport was a notable exception - which broke on mac and thus
needed a hack. just remove the qrc_ inclusion.
Change-Id: If5115665f331a280869e800673bf7b81d3ab559a
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this is needed by webkit's creative directory layout.
Change-Id: I2317162c11696d2820423d63563b10d3024a6cb6
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this makes qmake find them automatically now.
consequently, also do not write QMAKE_EXTRA_MODULE_FORWARDS to
.qmake.cache. still write the cache file, though, as otherwise a
top-level cache would mess up the module root detection.
Change-Id: I998b94fcc73ca3f8bf1af09a394ff8d40cf1fb76
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
a variable name should not reflect the tool which uses it, but its
purpose - especially, as the scope will be extended soon.
this variable is used by webkit, which has a somewhat creative directory
layout.
Change-Id: Id3d3fad6ed9395cb967aeabc79e47a0ba17f5423
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
absorb module.prf into qt_installs.prf, as that's where it belongs.
add qt_install_module option and automatically set it in
qt_module_config. make qt_installs use that option.
Change-Id: I860616f3a29a456f7b88ddaffa09375400c8911e
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
