Apparently, it is not enough to just retry 10 times (10 seconds) in the
CI network. It happens from time to time that a test fails due to server
port is unreachable. Especially, the docker containers are running in a
virtual machine on Windows and macOS platforms. In such cases, it needs
more time to warm up the service depending on the system loading.
Change-Id: Ia0234bff2a82988b62f451e20b50671708784008
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
There is no docker bridge on macOS. Docker document recommends using
port mapping to connect to a container; but it causes a port conflict
if the user is running a service that binds the same port on the host.
An alternative solution is to deploy the docker environment into
VirtualBox and use the host network option.
Task-number: QTQAINFRA-2293
Change-Id: I05dc65c5f8b4be7a1b1874a4ec7c034cc68679ca
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
This change frees the tests of their dependence on the Qt internal test
server (qt-test-server.qt-test-net). It makes the developers run the
tests out of Qt testing infrastructure.
If the user has installed Docker engine on their host, the test servers
will be built up inside separate Docker containers, and then, the test
case goes with the Docker-based test servers. Otherwise, the test case
will keep using the Qt internal test server.
Task-number: QTQAINFRA-1686
Change-Id: I518bc3675bfd658938509744b0e7e0610bc8bf66
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
The existing network test server has some limitations. Most notably, it
is not accessible by every Qt developer. Also, some services don't allow
simultaneous access, which causes flaky test results.
Instead of centralizing all the services to one physical machine, the
idea is to build up several dedicated servers inside separate Docker
containers.
1. Create testserver.pri and integrate it into the make check command of
Qt Test.
2. Define QT_TEST_SERVER flag for changing test parameters at compile
time.
Task-number: QTQAINFRA-1686
Change-Id: I0422ddb97eb8c11b4818771454851d19671253b1
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Reviewed-by: Ryan Chu <ryan.chu@qt.io>
Add more error messages on failures.
Task-number: QTBUG-25367
Task-number: QTBUG-25368
Change-Id: I064143a058b7b98d9d5eecab8b5da49f5307e1eb
Reviewed-by: Edward Welbourne <edward.welbourne@theqtcompany.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Don't access first() of a potentially-empty QList.
Check for QHostInfo::error() first.
Also change to constFirst() to prevent a detach.
Change-Id: I91fa0bbfb21f62af29abdb23b4869a7f039b259e
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
From Qt 5.7 -> tools & applications are lisenced under GPL v3 with some
exceptions, see
http://blog.qt.io/blog/2016/01/13/new-agreement-with-the-kde-free-qt-foundation/
Updated license headers to use new GPL-EXCEPT header instead of LGPL21 one
(in those files which will be under GPL 3 with exceptions)
Change-Id: I42a473ddc97101492a60b9287d90979d9eb35ae1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Qt copyrights are now in The Qt Company, so we could update the source
code headers accordingly. In the same go we should also fix the links to
point to qt.io.
Outdated header.LGPL removed (use header.LGPL21 instead)
Old header.LGPL3 renamed to header.LGPL3-COMM to match actual licensing
combination. New header.LGPL-COMM taken in the use file which were
using old header.LGPL3 (src/plugins/platforms/android/extract.cpp)
Added new header.LGPL3 containing Commercial + LGPLv3 + GPLv2 license
combination
Change-Id: I6f49b819a8a20cc4f88b794a8f6726d975e8ffbe
Reviewed-by: Matti Paaso <matti.paaso@theqtcompany.com>
Change copyrights and license headers from Nokia to Digia
Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Added #include <unistd.h> to tests/auto/network-settings.h,
so qtbase auto tests successfully build.
It is needed after the header dependency changes, part of gcc 4.7.
Change-Id: I76d1082f8454263f2c22c31a13aa3c1bf6a0c82f
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
In tests when IPv6 is not present QSKIP IPv6 tests.
Task-number: QTBUG-23660
Change-Id: I02abc7322d765a93cbf661e53c76257f03dca73e
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
The string from the server should begin with "* OK" and end
with "\r\n" according to the IMAP specification.
Still have a check for "server ready" as this does not change between
cyrus versions.
Change-Id: Ia01ed8aa054e5726bba8b411d30edc6205cc8465
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As in the past, to avoid rewriting various autotests that contain
line-number information, an extra blank line has been inserted at the
end of the license text to ensure that this commit does not change the
total number of lines in the license header.
Change-Id: I311e001373776812699d6efc045b5f742890c689
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Some of Qt's autotests depend on access to a test server. For each test
that used the test server, tests/auto/network-settings.h created a
global object to verify at startup that host lookups to the test server
will succeed (and abort the test otherwise).
There are two problems with that approach:
First, the sanity check happens before main(), and thus before the test
framework has started logging test results. This means that if the
sanity check aborts the test, the failure message will not be visible in
the test output if logging to a file or will cause the output to be
malformed if logging to the console in XML format.
Second, since Qt 4.7, the host lookup uses a class that connects to the
QCoreApplication instance, which doesn't exist before main(), and this
caused all tests that included network-settings.h to output an error
message from QObject::connect() at the beginning of the test.
Both of these problems are solved by removing the global object from
network-settings.h and instead performing the sanity check in the
initTestCase() function of each test.
Task-number: QTBUG-22876
Change-Id: Id49c1826906327bf571686cc11527f0265e5af44
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Symbian is not a supported platform for Qt5, so this code is no longer
required.
Change-Id: I1172e6a42d518490e63e9599bf10579df08259aa
Reviewed-on: http://codereview.qt-project.org/5657
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This is the beginning of revision history for this module. If you
want to look at revision history older than this, please refer to the
Qt Git wiki for how to use Git history grafting. At the time of
writing, this wiki is located here:
http://qt.gitorious.org/qt/pages/GitIntroductionWithQt
If you have already performed the grafting and you don't see any
history beyond this commit, try running "git log" with the "--follow"
argument.
Branched from the monolithic repo, Qt master branch, at commit
896db169ea224deb96c59ce8af800d019de63f12
